XS: DateTime valid don't cast to TIMESTAMP

Similar Questions

• Apple TV don't cast not as Roku or Chromecast

  It is a question of two parts:

  1. If I play the video on my MacBook and cast off on the apple tv, that's fine until they let me off the coast of the page, then it shows what I do as opposed to what I look at. With Roku or Chromecast so I launched the video I can multitask and venture far and my video will still be visible on my TV. Should I not something properly implemented?

  2. in order to get the audio to play through Apple tv, I had to change the settings on my MacBook. However, when I'm done using the apple tv does not change it back, so whenever I'm done I have to go back to settings and say audio to use my MacBook speakers. I do not do at all with the chromecast or Roku he automatically knows which put the audio too.

  Help!

  1. What do you are mirroring the screen, so everything you do on the computer is transmitted. If your OSX is up-to-date, you can use AirPlay basis, just like on iOS, to the right video stream, otherwise you would need a 3rd party program like Beamer.

  2. it would be pointless to change the setting, unless you just want to reflect your audio computers by changing the output.

• datetime SQL server because of oracle timestamp?

  Hello world
  
  When I try to convert the datetime sql server timestamp oracle show me the error in the interface to ORA-30088: datetime/interval precision is out of range.
  
  
  The agove error occurs when you create of work table itself.
  
  I changed the data of the physical architecture type converted to datetime sql server oracle timestamp and tried, but still the same error.
  
  can someone help me with this.
  
  Thank you

  Hi Dev,

  You're right, it's a good solution.

  Cezar

• Real Download Center Validation don't DO NOT WORK!

  I am furious right now. I have validated my operating system from Windows Vista to about 5 - 6 times now, he said: my copy has been verified to be authentic.

  I tried to download Winhlp32.exe to

  http://www.Microsoft.com/download/en/details.aspx?ID=5143

  The button 'Continue', says, I click it and it tells me that I need to 'Genuine Windows Validation '.

  http://www.Microsoft.com/download/en/handoff.aspx?ID=5143&LegitCheckError=93

  I click on 'Continue' and I am brought to this page http://windows.microsoft.com/en-US/windows/home

  WTH????????????????????????????????????????????????????????????????????????????

  I am very angry at the moment, I want an answer. There is absolutely no sense.

  Forums for peer-to-peer (user to user).  Demanding you gets none the case.

  32-bit version of the file you want

  64-bit version of the file you want

• OBIEE Cast did tank, the slightest mistake of timestamp

  Hello
  I am able to use the cast as tank and then convert based on the timestamp on 2 date columns to get the diffrnc of time using timestampdiff. It is on a database of the instance ebs 11.
  As we are upgrading to EBS R12, we have implemented a new instance of obiee on that test. But in this new instance of test, the same formula is slightest mistake out.
  The date is in the format yyyy/mm/dd. After melting as tank, I get it to mm-dd-yyyy format in both cases. But the cast as timestamp, in the new instance (r12), I get the error
  Oracle error code: 1843, message: ORA-01843: not a valid month in the OIC calling OCIStmtFetch. [nQSError: 17012] In bulk fetch failed. (HY000)
  .
  I tried passing the date in the format "dd-MON-yy" (char format) in the instance of r12 and then cast timestamp and it seems to work. Why the bi server expects date in this format after tank and how do I change this?
  Note: the nls_date_formats are the same in both the database.
  in both files nqsconfig.ini date formats are also the same
  
  any other place where I should put it?

  Try to search the XML for the same code and replace using Catalog Manager.

  Using Catalog Manager to find your old code that uses the cast as tank and replace it with the new code for more details, see
  http://docs.Oracle.com/CD/E23943_01/bi.1111/e10541/prescatadmin.htm#i1046286

  Since the given suggestion worked can mark you as correct on my last answer?

  Published by: VIEREN Srini April 1, 2013 09:46

  Published by: VIEREN Srini April 1, 2013 09:52

• IMAQdx timestamp off-by-one

  I have a network camera and provides its own timestamp using the IMAQdxTimestampHigh and IMAQdxTimestampLow properties. I'm observing something that I don't expect - the timestamp seems to be extinguished by a single image.

  I have a simple VI which illustrates this behavior. In it, I log IMAQdx with my camera, set up a puncture, reset the timestamp counter and read the images in order. When you look at the timestamp associated with each image, the first image has what seems to be the timestamp of the nth + 1 grabbing the previous image, as if the obsolete data was left in memory.

  To see this behavior, run the 'exercise Timestamp Reset.vi' twice. Before running the second time, note the value for "last Timestamp". When you run the second time, the value of "first Timestamp" is slightly higher than the "last Timestamp", which suggests stale data. I expect 'first Timestamp' to be close to zero.

  What could cause this behavior, and how can I fix my code? So far I have tried:

  1. Move the "Reset Timestamp Counter.vi" as it is called immediately after created the session IMAQdx.
  2. Create a session of IMAQdx, reset the time stamp counter and by disabling the session before creating a second session of IMAQdx for the clamp.

  My particular setup:

  • Allied Manta MG 504 b ASG
  • LabVIEW 2009 SP1
  • IMAQdx 3.9.1

  Hello

  It's a really nice and clean example you provided!

  I wasn't able to replicate this with Basler Ace cameras or AVT GX1050 I had very practical (the first timestamp was always correct). Given that IMAQdx decodes it directly from each image, as they come it seems unlikely that it should be able to cause this condition, unless the camera sent actually it.

  My suspicion is that it is a problem of firmware on your camera Manta. Can you see if there is a firmware update, you can install?

  In addition, if you could provide a network trace of something like wireshark showing traffic over the second acquisition, it should be very easy to refine, if it is in the camera or IMAQdx.

  Eric

• VI 'Variant to data' Converts the DateTime inaccurate.

  The extracted data is a timestamp column in a microsoft access 2007 database.

  As shown below, the said Variant ' 1: 46:45 '.

  

  But the timestamp converted from Variant 1 milliseconds before the Variant.

  It is now "1:46:44.999".

  He is shown below.

  

  How can I make the exact conversion?

  This is how I solved the problem of millisecond with microsoft access.

  Because the microsoft access database datetime type has an accuracy of up to one second.

  some records of datetime are converted accurately in LabVIEW timestamp, and other records of datetime are converted with 1 millisecond gap (it could be more or less) and LabVIEW timestamp.

  I didn't distinguish between those converted with precision and those wronged, because it could lead to errors.

  So I did as below.

  

  This is the first 6 columns of the Recordset.

  recorded_time is a column datetime of 'access '.

  Year (DateTime) returns the year as an integer of 4 digits, month (datetime) returns the month as a number between 01 ~ 12 and so forth.

  And I created a Subvi, which covers the first 6 columns of a recordset object and returns a timestamp.

  

  As you can see that the second fraction is equal to 0 signifie.000.

  Each datetime record has maintenant.000 at the end, and no trace of datetime is converted into LabVIEW timestamp incorrectly.

• date/time timestamp string

  Hello

  I want to convert DateTime in the format string to timestamp (using Labview 7.0) format. For this that I m using scan tool chain and cable of the format string, but its not able to connect the output. I have attached the vi.

  Kindly help me to fix the error

  Kind regards

  Ratna

  
  

• Many many order of VALIDATION

  Hello

  JDev 11.1.2.4

  I'm trying to create a number insert many relationships. My model has a * to * the association between A and B EOs. I also have the link display based on this association.

  In the AM, I exposed A and B your using the VL and also the VO ABIntersection.

  My AM:

  A

  --> B

  ABIntersection

  In the AM, I create 3 objects A, B and ABIntersection. The AM method is called from a managed bean. The code is essentially

  AViewImpl a = this.getAViewImpl ();

  a.createRow ();

  Set the attribute for A

  BViewImpl b = this.getBViewImpl ();

  b.createRow ();

  Set the attribute required for B

  ABIntersectionViewImpl ab = this.getABIntersectionViewImpl ();

  ab.setAId (a.getId ());

  ab.setBId (b.getId ());

  Validation is called. In the paper, I see an INSERT IN A then an INSERT IN AB. It fails because of the constraint of integrity which is normal because the line B is unknown.

  < OracleSQLBuilderImpl > < doEntityDML > OracleSQLBuilderImpl.doEntityDML [6725] failed...

  < OracleSQLBuilderImpl > < doEntityDML > [6726] X / Open SQL State is: 23000

  java.sql.SQLIntegrityConstraintViolationException < OracleSQLBuilderImpl > < doEntityDML > [6727]: ORA-02291: integrity (AB_FK) violated constraint - found parent key

  This works if the validation done INSERTs in this order A then B then the AB. Is there a way to put the order?

  Thank you

  Hello

  I hope this helps.

  Liu Wuhua technology and learning of Notes: insert master / detail in ADF BC

  Best regards

  Jagadeesh Badri

• Oracle Timestamp with the right date

  Hello

  I have a date field, but it must be stated in the report as follows: -.

  day - 2014-08-14, but it should be shown in the report as "2014-08-14 00.00.00.0000'"

  Select TO_CHAR (TO_DATE ('2014-08-11 ',' YYYY-MM-DD'), "YYYY-MM-DD HH24:MI:SSxFF") double - it does not work.

  any help appreciated.

  Select to_char (cast (DATE ' timestamp' 2014-08-11),'YYYY-MM-DD HH24:MI:SS.) FF4') are the result of the double

  RESULT
  2014-08-11 00:00:00.0000

  Concerning

  Etbin

• Timestamp in PL/SQL execution

  Hi all
  
  Oracle 11 g 2
  Developer SQL 3.2.09
  
  We have a procedure stored in a package that returns a refcursor. One of the columns (for example, XYZ) is timestamp with local time zone. When I right-click on the package and select run I get the window run PL/SQL where I enter the input parameters and perform the procedure. The result is displayed in the tab "output Variables. When I select the refcursor I can see data from all columns except XYZ. It displays oracle.sql.TIMESTAMPLTZ@XXXXXX (where XXXXXX is a hexadecimal number).
  
  If I take the XYZ timestamp with time zone column then I get oracle.sql.TIMESTAMPTZ@XXXXXX
  
  If I have to cast to timestamp just so I can see the data.
  
  Without the casting, data are available for our other applications. For some reason any SQL Developer is not able to view it.
  
  I added couple of execute immediate instructions to set the time zone and timestamp format. Still no use.
  
  Does anyone know of a fix for this?
  
  Thank you
  Barro

  It is a bug. It has been reproduced in-house and fixed for our next release.

  I reproduced with this test scenario

  create or replace
  FUNCTION SYSREF_TIMESTAMP
  RETURN sys_refcursor
  IS
  l_curvar sys_refcursor;
  BEGIN
  L_curvar OPEN FOR "SELECT Systimestamp from dual;

  RETURN l_curvar;
  END SYSREF_TIMESTAMP;

  Run, it appears in the output for the ref cursor
  oracle.sql.TIMESTAMPTZ@7449369e

  Published by: Jeff Smith SQLDev PM on November 28, 2012 22:47

• JDeveloper 11.1.1.3.0: Membership based Association vs database Validation

  Hello
  
  What is considered 'best practice' for the use of a composition association, when taking performance into account.
  
  My understanding is that through this used the FK validation done on the application server and without on the database server. The two approaches have implications of IO. How can I approach this when designing my EO models.
  
  Thank you.

  The 'best practice' for performance is of only to care when needed, not as a priority. Maybe you need to detail what you're trying to do, we can make a judgment you need a performance optimization... maybe what you do will be nothing special, hard to say.

  About CA FK validation, ADF is well optimized. An attempt to delete a parent row translates into a simple extraction of 1 child line based on the FK field via a variable binding query.

  You can test and verify yourself by using the Djbo.debugoutput = console option - to see that DML ADF engages with the database (see: http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/bcqueryresults.htm#CHDBBEEB).

  CM.

• SQL server datetime problem - oracle do not capture "millisecond" of sql server

  Hello world
  
  Reading from the datetime sql server timestamp to oracle, oracle is not catpuring correctly the milliseconds of oracle, rather it's just using 0000000 to poulate rather than correct Ms.
  
  verified in the topology as Yahweh than for sql server datetime converted in to oracle's timestamp.
  
  Please suggest where he made mistake. its urgency. ?
  
  Thank you

  Good to know Dev!

  Good luck!

• Between the operator on systimestamp do not return data

  create the table test_ts1 (timestamp);

  insert into test_ts1 values (systimestamp);

  insert into test_ts1 values (systimestamp-interval '1' time);

  commit;

  Select * from test_ts1 where one between systimestamp - interval '1' time and systimestamp;

  do not return data, could you please help? I would if necessary the param values.

  --

  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production

  PL/SQL Release 11.2.0.2.0 - Production

  "CORE 11.2.0.2.0 Production."

  AMT for Linux: Version 11.2.0.2.0 - Production

  NLSRTL Version 11.2.0.2.0 - Production

  Thank you

  Mahesh

  2 options.

  1 convert your datatype of the column of TIMESTAMP WITH time ZONE SCHEDULE

  SQL > create table test_ts1 (a timestamp with time zone);

  Table created.

  SQL > insert into test_ts1 values (systimestamp);

  1 line of creation.

  SQL > insert into test_ts1 values (systimestamp-interval '1' time);

  1 line of creation.

  SQL > commit;

  Validation complete.

  SQL > select *.
  2 of test_ts1
  3 where one between systimestamp - interval '1' time and systimestamp;

  A
  ---------------------------------------------------------------------------
  MAY 19, 14 09.06.01.135799 AM - 04:00

  2 convert SYSTIMESTAMP TIMESTAMP.

  SQL > DROP TABLE TEST_TS1 IS SERVING;

  Deleted table.

  SQL > create table test_ts1 (timestamp);

  Table created.

  SQL > insert into test_ts1 values (systimestamp);

  1 line of creation.

  SQL > insert into test_ts1 values (systimestamp-interval '1' time);

  1 line of creation.

  SQL > commit;

  Validation complete.

  SQL > select *.
  2 of test_ts1
  3 where one between systimestamp - interval '1' time and systimestamp;

  no selected line

  SQL > select *.
  2 of test_ts1
  3 where one between Mount (systimestamp timestamp) - interval '1' time and cast (systimestamp timestamp);

  A
  ---------------------------------------------------------------------------
  MAY 19, 14 09.04.09.132503 AM

• Problem with the dashboard Date invites

  Hello
  
  I have a date field that I would like to filter, but the problem is I want to enter the start and end date in 2 variables which I can use it in my report. I tried to use between it funtion of the dash prompt, but it does not allow you to enter the start and end date. Then I tried to use 2 limes for start date and end date, but the guest does not allow me to add the same column twice. Can someone please help me because the way in which we can enter the values of some variables?
  
  Thank you.

  Hello..

  One thing Casting date timestamp with casting (date as a timestamp) is not possible...
  I don't know why you can't apply normal filter on your ABC column instead of the filter inside your fx ...
  If you really think the requirement of the use of domestic filters then you must have little...
  1. the column on which you want to apply the FILTER must be aggregated column (XYZ) of your SPR..., this column needs and should be SUM or AVG or COUNT... etc, aggregates...
  2. the ABC column shouldn't be a fellow...

  Now... come to your problem...
  Without manually write...
  Select your fx of measure, and then click FILTER...
  Select your criteria ABC...
  Click the Add tab > varies > Presentation
  Here you write the quick name without using braces or symbol @... just as usual the name you gave it invites...
  Click OK, then OK again... always the error here? (do not throw anything)
  And what is the data type of the CBA, is this date?, if you find the format of this column showing how the data in the same format of your quick dashboard or not?
  If it isn't... you must divide the characters date and concatenate all part of getting a variable presentation...
  According to my knowledge it must not go that far...

  Hope this helps you...
  Otherwise feel free to share your problems here... ;)

  And please give points to the people who helped you to your latest posts...
  ALL THE BEST

  Thank you & best regards
  Kishore Guggilla