xw6400: trying to move to Win7

Hello

I am trying to improve my operating system from Vista to Windows 7 Ultimate 32 bit but I get the following error:

"Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation.

"Error code: 0 x 80070570.

I tried burning at 2.5 x speed dvd to start and create a USB boot and still get the same message.

It will basically stop at 1-2% and the error pops up.

I also bought new ram

Any help is appreciated

Specification of the system here:

Error message below:

Advice of Skylarking is correct, and below are a few things added for you based on experience of the real world with this workstation.  I just checked my account on the xw6400s I have personally upgraded to Windows 7 Professional 64 bit... its over 30 now.  I've never had a failure to upgrade.   Here are some tips:

1. your serial number of chassis of 2UA711123B is near the beginning of the production of this workstation run.  The xw6400s have each on eBay and the game, that I worked with was pretty random of all through the race.  Yours was the 4th overall of the 30 files I have.  So, it may not be able to accept the quad core faster than HP approved for this workstation and probably also has an IDE and not SATA CD ROM  More about that below.

2. you use an old BIOS... 2.10. you must first pass by... 2.38. you can get this installer of HP BIOS, unzip it in its standard task at the level of the root of C and then go and get the file out of the folder BACK .bin and put it on the top level of a USB key.  Then cold boot in the BIOS, with whom, in a USB port and F10 in BIOS and update your BIOS from BIOS.  You're not start in this thumb drive... you just have it access since the primitive operating system which is called BIOS.  This is the safest way to update the BIOS.  Or, you want to maybe just update in VISTA Installer (less safe).

3 suppose that you do a clean install on a SSD... which you really should do in this day and age.  You want modern capabilities of AHCI enabled, and which is done through a BIOS setting.  After having completed your upgrade of BIOS 1.38 check back into the BIOS and place emulation SATA on "RAID + AHCI.  Even if you will never use RAID.  It's the strong recommendation Intel and HP.  If you have not set it just before the clean installation of W7, you will not have the many benefits of the AHCI, and you don't want those with modern disks (even if you end up using only a SATA drive, rather than a SSD).

4. your is a workstation generation SATA II and HP '' probably '' will have problems if you use a non - generation HP SATA III SSD or HDD.  This was reported in detail in this forum.  There is a material risk that I will not take personally, and the workaround is easy.  My recommendation is to get an Intel 320 series (generation of SATA II) off eBay, the 300 GB or 160 GB SSD and have a second "documents" drive there with him so you can keep your SSD 20% empty at any time.  This percent is important for better performance of the SSD.  Better buy a generation SATA II HDD for this document reader, or use a source HP SATA gen III HDD for this HP engineers because even a firmware solution for letting those who later gen III drives work well with these workstations prior gen II.  Use the Intel SSD ToolBox Intel Software maintains updated to refine this SSD and update its firmware if necessary.  Overall, I'm doing a reformat of low level of any occasion SSD or HDD with DBAN and then create a long type NTFS format before I consider doing a clean install on it.

5. I'd go personally to a "system builder" purchase W7Pro64, not 32-bit, 64-bit has significant benefits.  I had bad luck with Ultimate versions of W7 in terms of take them no updates from Microsoft.  I gave up on it and you have never looked back.  I have no time to mysterious failures update correctly after making one installs own perfect that would have eventually worked perfectly if they were W7Pro64 first.  Download the installer DVD including SP1... saved you some time and this version has been available for years.  I choose the MS install by default and then reduce it later.  I just want to be as automatic as possible.  However, I make sure, to turn off accepting the optional updates in the same automatic way as important as soon as I can after its SSD/HDD is booting from the workstation.  MS who used to sneak in a few things I don't want, in the past.  I just checked... about $80.00 off Amazon for this DVD, and worth every penny.

6. your CPU is very slow.  HP ever sold a slower for the xw6400... and you don't have one of these.  The FSB is slow... its clock speed is slow.  That's the bad news.  The good news is that you can upgrade the processor easily and add a second correspondent and it is very expensive to do so through eBay.  The probability that you would be able to get the best quad core (E5345) working in this motherboard is a bit low, but even they are cheap off eBay to experiment.  You want to always install the latest version of code sSpec containing built in Intel improvements, so here are the codes sSpec buy.  To test and see if this quad core will run in your motherboard, you must buy the version SLAEJ of the E5345.  Looking for the E5160, SLAG9 sSpec code the faster dual core.  I'd personally buy one of tests with SLAEJ and two of the SLAG9 because you probably won't be able to run this quadruple-heart, and you will certainly be able to run two of these faster two hearts in my experience (more than 60 used transformers off eBay now, with only a bad).  Your current processor running at 1.6 GHz, and works the fastest dual-core 3.0 GHz.  If you can run one or the other of these quad or dual core, then you can run two.  So you'll want to buy a second radiator/fan.  Better to get the version-002 or 001, because of-003 version has one less heat pipe.  Look on eBay.  Or buy one for the xw6600/xw8600... those fit very well also.

You want really two processors in there, and two of these E5160s give you a very nice result... maybe just go with both of them off eBay.  They are pretty cheap.  On this dual-faster core clock speed is actually faster than that of the best quad core HP approved for the xw6400, then for many programs two E5160s may be the best choice.  You will see a great improvement on what you currently have.  My favorite of the thermal paste is Noctua.

7 memory... you have total 4 slots, and I would recommend HP memory used for those off eBay.  I posted here HP part numbers to search.  I was running 4 x 2 GB (or 4 x 4 GB).  Also, you can even draw with W7Pro64 with 4 GB, but 8 is the sweet spot, not expensive.

8. There is some optical drives of CD/DVD HP xw6400 stock that MS of W7 DVD Setup has no drivers integrated.  This discovery was a real revolution for me.  I found this question in some but not all versions of these controlled substances SATA, but older versions of the IDE comes with a lot of the earlier xw6400s seem to work pretty well.  In a pinch, I used a connection USB CD/DVD optical drive external to overcome this problem... that was actually in a Z620 (!).  You must have your BIOS set to be able to boot from USB, if you end up needing to do.  Finally, the optical drives SATA HP later off eBay are cheap and seem to have solved that problem.  Look for the upper frame numbers get newer.

9. When you do your own installation on your SSD/HDD, be sure to use the method I described in the forums here so that you leave the special small "system reserved" partition will be created.  Once the installation is complete since the W7 DVD you may want or need some updated drivers.  You can search the lists of drivers more recent Z600 and Z620 HP for Realtek and Broadcom installers universal and use them to get the most recent drivers.  For example, the Z620 uses a chipset motherboard Intel LOM for networking, but had a Broadcom NIC also offered.  So, you can find a recent Broadcom Universal Installer it.  So, you can find games driver updated here and there most recent ads from HP workstation.  None of the HP xw6400 series drivers are "supported" or kept up to date now, but my method works very well... just antiquing.  These two installation programs that I mention will recognize what is on your motherboard and put on the right drivers for it automatically.  I always check in the programs and features first control panel and uninstall anything with Realtek or Broadcom on his behalf before making these types of updates.

10. video card: I got excellent with the Quadro FX3700 (which will need you to bring the power cable 6-pin extra PCIe wrapped top to bottom and zip tied behind your diet).  I also like the Quadro FX1800, who runs more cool and don't require additional power.  Also, it runs quieter, with his biggest fan.  Again, used off eBay and nVidia retains the drivers for those updated for W7 and W10.

11. Once you get things up and launched, you can "activate" this workstation for the free update W10.  It's another reason to get the 64 bit version of W7 for your new installation... you'll end up with W10Pro64 as your facility in W10 so.  I have one of my two main home work stations running in a xw6400 swelled upward, and the other is a bloated xw6600.  These are more than fast enough and are comparible to most of the Z620s that I use at work.  I have W7Pro64 and W10Pro64 start SSD in a system of carrier/receiver in the Bay of diskette (Icy Dock MB991SK-B) for both, so I can show my partners differences.  Few can detect the difference in speed between the xw6400 and the xw6600, and my fastest xw6600 (sSpec SLBBM 2xE5450 code) build scores high or even higher that most of the Gen I mid level Z620s that we use at work.  Xw6400 (2xE5345 SLAEJ sSpec code) is only a little behind it.  Finally, the most recent Gen II high premium Z620s victory over all the rest as expected.  No Z640 experience yet.

A lot to digest... good luck in your project.

Tags: HP Desktops

Similar Questions

  • I'm trying to move a song to my iPhone music library to the iTunes library on my MacBook Air.  I do not want to synchronize the two, so how do I simply copy/migrate the song on my computer?

    I'm trying to move a song to my iPhone music library to the iTunes library on my MacBook Air.  I do not want to synchronize the two (and they have never been synchronized), so how can I simply copy/migrate the song on my computer?  Is there a way to do, without having to re-purchase the song on the iTunes Store on my Mac?

    E-mail (for yourself) click on it in the email

  • In trying to move the photos to the key, I've accidentally moved into my office - they kept sort of duplication and there is 7 000 or them - how to remove the easily?

    Mac Pro 10.11.4 17 "

    In trying to move photos to the key, accidentlaly I moved into my office - they kept sort of duplication and there is 7 000 or them - how to remove the easily? I've been

    Open your desktop folder in the Finder, then type 'image' in the search field in the Finder window toolbar and value of the research for "kind: Image".

    Define the scope of the search for "Desktop".

    Now, you can select all items in the window by entering ⌘A, then drag the photos in your Inbox.

    Check a second time, that the scope of the research really is 'Office' and not 'this computer '.

  • To remove an application (Dropbox) - he says it's open have tried to move to the trash etc.

    Impossible to delete an application (Dropbox) - he says that it is open. Tried to move to the trash from Finder, etc. I can't find an icon etc to open it?

    Open Spotlight (it looks like a magnifying glass, to the top right) projector type to launch spotlight, and then type Dropbox to Dropbox

  • Trying to move a large file on external hard drive

    I have a 119gig .bkf file on my desktop and I am trying to move to a new disk 320gig external hard. I get a message that there is not enough space on the disk. If I reformat the external hard drive from FAT to NTFS it work or do I start the backup utility and save it to the external hard drive? On my desk .bkf file took almost 8 hours to create. Don't want to do it again if I don't have to. Any suggestions would be much appreciated. Thanks for your time!

    You guessed correctly the problem. FAT32 is a 4 GB file size limitation. You need to format the drive NTFS. MS - MVP - Elephant Boy computers - don't panic!

  • A folder disappeared when I tried to move it from bookmarks

    Tried to move a little higher folder (with the mouse) and it disappeared. For some time he remained in the window where to save to Favorites, now can't find any. Looked like everywere - in all possible places bookmarked - it seems he went...

    If you have not left on Firefox, you can try the command Cancel in the dialog box library. It's in the menu "organize." But if you make subsequent changes, then that may not be the best way to recover.

    A technique to find a lost file — or see if it is there anywhere - is to export your bookmarks to an HTML file and open as a web page in a Firefox tab. Then, you can use Find and get more context than you can with the research in the dialog box library itself.

    Here's how to export: Export Firefox bookmarks to an HTML file for backup or transfer bookmarks

    If they really do not find anywhere, Firefox may have a backup of day of your favorites that you can restore. According to the amount of other changes in the meantime, which is perhaps not a very attractive prospect, so hopefully they will turn upward in the export.

    If you do not have to restore a backup, you can then add bookmarks in html file exported by right click > to bookmark this link that you discover the latest.

  • Vista - I'm trying to move a shortcut from my Dropbox one folder my a My Documents folder.

    Original title: help

    I'm trying to move a shortcut from my Dropbox one folder my a My Documents folder.

    I tells me I need permission to perform this action. I am the administrator then who do I ask?
    David Ashby
    How to take possession of an item in Vista. Works also under Windows 7
    http://www.howtogeek.com/HOWTO/Windows-Vista/add-take-ownership-to-Explorer-right-click-menu-in-Vista/ 
  • Unexpected error 0 x 80004005 When trying to move / unzip a file.

    Hi, I get the above error when trying to move a file that I downloaded. He asks me to administrator rights, which i can approve (despite me being the only user on the computer.

    The file is an update of an independent program for which I have downloaded several updates for any incident before. I was also on the Forum here, and no one else has had this problem with the file.

    I am running Vista Home Premium edition

    Are there steps I can take to address this problem?

    Edit: The wording of the error is as below.

    An unexpected error prevented the operation. Please take note of this error code, which can be useful if you get additional help to resolve this problem:

    Error 0 x 80004005: unspecified error

    I managed a temporary solution - work around rather than fix - download the patch directly on the desktop, unzip and copy paste n from there. Hope that helps.

  • I'm trying to restore my win7 with HP USB recovery Flash Disk, I get the following two messages

    I'm trying to restore my win7 with HP USB recovery Flash Disk, I get the following two messages:

    "Do not create C:\Users\User\AppData\Local\Temp; c:\arc\01Script\FormatUFD.SP' and the messsage "Fail to create.

    How to port HP_recovery in car to my flash drive?

    Windows 7 x 64, HP G62-144DX

    Hello:

    I can't help you with this specific issue, but if you can get it is resolved and you can read the product key 25 character Microsoft Windows on the bottom of your PC, do your own installation of W7 media to reinstall W7.

    Here's how:

    If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

    Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

    Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

    http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

    Use 25 characters on the PC product key to activate the installation.

    The key will activate a 32 or 64 bit installation.

    Then go to the support of the PC and driver page to install the drivers you need.

    Link to downloads ISO of W7 is below.

    http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

    Paul

  • accidentally tried to move the contents of drive c on external hard drive

    so... I thought that I could free up space by moving everything to an external hard drive.  I tried to move everything on the c:\ drive.  Oops.  He started, but then I think he moved to some files necessary for windows to run, then it stopped working.  I can't move, is back.  tried to use the back, but now access is denied to the c drive.  Anyone know what I need to do?

    It MIGHT be possible, but I think that it depends on many factors, such as the security for the reader and permissions permissions different to elsewhere in the hierarchy of the folders, files or not he used any bitlocker or other protections. I couldn't honestly tell you exactly how to get started.  It might be useful to plug it into another computer, just to see if you can copy the files by taking possession of the records and yourself permission, but that may end up being a dead end too.

  • I think I deleted my 6 new images that have been trying to move to my drive

    I think I deleted my 6 new images that have been trying to move to my drive. I searched everwhere iI cannot think without result. I did this on a Surface and appear to be limited with options.  Can they be retrieved from Adobe free of charge? I don't have the chance to use them.

    You can always download them as many times as you want. You can access it by following the solution proposed here:

    An image that I license did not download correctly, how do I go back and download again? Also where can I see my PIC I have a license downloaded online?

  • LiveCycle ES4. I am trying to move a picture online with a text box to create a header.  I had to create a subform that flows to generate multiple pages of text.  After changing the settings, it seems that I can't place images and text where

    LiveCycle ES4. I am trying to move a picture online with a text box to create a header.  I had to create a subform that flows to generate multiple pages of text.  After changing the settings, it seems that I can't place the images and the text I would like.  I tried moving them to the bottom, but does not work.  Is there a way to encapsulate the images so that they can be places as much as I want?

    Select your photo and text inside the subform flowed. Right-click and select wrap in subform do the positioned Subform subform. This will allow you to move objects in this subform positioned the way you like them.

  • Tried to move a folder and it delete files on disk

    I tried to move a folder to another folder in LR CC, and coincidentally, I moved it again in the same folder (which means that I had two simultaneous operations happening now doing the same thing). I got an error (error code lost) and the file is now gone from my hard drive. I checked everywhere – each folder on the hard disk, the Recycle Bin, etc. Is there any hope for these files?

    Did you use your operating system to search for photos by file name?

    If you did, and research based on the operating system is unable to find the pictures, then you probably have been bitten by a rare but serious bug in Lightroom, which is described in the response 1 in this thread

    Lightroom deletes pictures while moving

    For later use, you need to move photos using your OS (not Lightroom) and then reconnect in Lightroom using these instructions: Adobe Lightroom - find folders and files moved or missing

  • Trying to move an icon next to my top NAV of the page.

    www.bristolequestrianservices/stables.html

    I'm trying to move a FB icon next to my top nav page,

    Me I lowered the top nav and the div for the FB icon float to the right, disable both, why don't he's going to please.

    Thank you

    Hi Karen,.

    in my library, I found these tips css, based on the pages of the old SPRY menu:

    #MenuBar6 a {}

    background-color: #FC0;

    padding-left: 1.5em;

    }

    #MenuBar6 a: hover {}

    background-color: #FF0;

    Color: #F00;

    }

    #MenuBar6 a.MenuBarItemSubmenu {}

    background-image: url(images/star.gif);

    background-position: 5% 50%;

    }

    #MenuBar6 a.MenuBarItemSubmenuHover {}

    background-image: url(images/star-hover.gif);

    background-position: 5% 50%;

    background-color: #FF0;

    Color: #F00;

    }

    The gif, you'll find it here: and here: place of the star, you can unse your image of fb.

    Hans-Günter

  • Trying to move from a menu of navigation link that is too long to two lines and can't change it. If something has changed in this regard?

    Trying to move from a menu of navigation link that is too long to two lines and can't change it. If something has changed in this regard? I'm used to be able to do this simple action.

    No, there is no change in this regard. Exactly how you try to change the links? In Design view or by BIE? Also are you referring to the default menu or a manual.

    Thank you

    Sanjit

Maybe you are looking for

  • I would change my download directory, but the option is grayed out. Can I fix this?

    I have no trouble to change the download directory in other browsers on my computer, e.g. Safari. I've attached a screenshot of my Firefox preferences's general tab. I just noticed in the "Troubleshooting Information" attached to this question page t

  • Portege R100 and HDD upgrade

    Hello I have a Portege R100 and I want to upgrade the 40 GB HARD disk. What is the highest size that I could upgrade using Toshiba or not Toshiba HDD?There are 1.8 "SSD? What would be the best way to update? Thank youRomeo

  • I can't access my router page.

    Hey, I tried to access my router page to to a specific port. I used to be able to access all the time and now I can not even attend it. Yes, I did the default gateway of my cmd and the routerlogin Web site. Everything I do is type in the default gate

  • Whenever this jumps upward and the im trying to set

    Problem event name: BEX Application name: iexplore.exe Application version: 8.0.7600.16385 Application timestamp: 4a5bc69e Fault Module name: yt.dll_unloaded Fault Module Version: 0.0.0.0 Timestamp of Module error: 4ab58483 Exception offset: 62908839

  • Two questions: Windows Vista and XP on HP a6130n

    A6130n HP from my father (AMD Athlon 64 X 2 dual processor running Windows Vista) had a hard drive crash. I replaced the HD and tried to recover using the recovery discs, he has created. He was suspended during the recovery process of system usually