I can't access my router page.

Similar Questions

• Tecra M5: Can not access the internet pages, but can ping in cmd.exe

  Hi all, this is confusing to me.

  I've been happily connected to my WLAN for more than a year without any problems. I recently updated my drivers for the following on my Tecra M5:

  -Intel Pro Wireless adapt
  -Drivers audio Sigmatel
  -nVidia graphics card

  Now, after facilities, everything was fine. However, a few days later, I turned on the laptop and went to IE7 and it cannot display the web page (my homepage is www.google.co.uk). I called my ISP to help and they reported problems on the service, and they gave me the www.google.co.uk ip address I got a response of in cmd.exe. It seems that I can get out on the internet but I can't access the Web pages - it could be a DNS issue?

  I have disabled my A - V and firewall and tried but get the same question. I also tried to restore the PC back more than a month and it did not help either. I'd appreciate any help that anyone can give.

  I also plugged the laptop directly into the router using an ethernet cable, so it's not only a wireless issue either.

  I have installed any other software at all at the moment and the only other thing that got my attention, it's that, in the field of restoration, there a lot of system restore points, which I wasn't expecting to see in the last month. But it could be a Kipper.

  Thank you very much

  MARC

  Hello

  According to your message, you are not able to connect to internet via LAN and WLan. Is this good?

  Well, in your case I would first check the router settings and re still.
  In addition, you must reset the router.

  Usually, the router assigns the IP address, and therefore you would just plug the laptop LAN cable and then should be able to connect to the internet.
  Please note that the TCP/IP protocol settings must be set to automatic.

  Check everything first!

• DV6-6024tx: I can't access the download page for the driver for a Pavilion dv6-6024tx

  The site seems to be malfunctinoing trying to get drivers for this laptop. Anyone know how I can get access to them?

  Please see the link:

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-6000-entertainment-notebook-PC-series/5048664/mo...

  Help, please!

  Hello:

  Yes, I reported this problem last week.

  Go to the bottom of the support page and the change of the country to the Spain, and you will be able to get the drivers you need.

• can not access the router (192.168.1.1) of the browser firefox web

  When I try to access my RV042G Gigabit Dual WAN VPN router from firefox or chrome I get an error message

  > An error occurred during a connection to 192.168.1.1. SSL has received a low ephemeral Diffie-Hellman key in the handshake message exchange the server key. (Error code: ssl_error_weak_server_ephemeral_dh_key)

  I had a similar problem with the storage attached network (Synology Diskstation) unit but I was able to create a certificate that meets the "modern standards" and the problem was solved.

  I need to create a new certificate for the web server on the router RV042G?  How?

  FYI - running firmware 4.2.3.06

  Thank you

  Lee

  Hello Lawrence,.

  Thank you for using the small community of Support Business!

  It is a known problem that affects a number of products for small business. There is another post which lies here who has some solutions you can try.

  If you have any other questions, please post them here and I'll do my best to help you!

  Best,

  Taylor

• I can't access a Web page from ANY browser! Help.

  I tried Google Chrome, Safari and IE8, but no matter what, every Web page I try to go to, none of them appear. But I have an internet connection.

  Edit: The reason I know that I have the internet connection, because I was able to update my outdated AVG Free and I was able to connect on IMVU without problem.

  How do you know that you have an Internet connection? Please give some more information:

  1. How do you connect to the Internet? Cable? DSL? Dialup? If you have a cable/DSL modem, the lights are on?
  2 If the cable or DSL, is your computer connected directly to the cable/DSL modem or do you have a router?
  3. do not connect cable or wireless?

  4. Please do:

  Start > run > cmd [Enter]
  The command prompt opens. At the command prompt, type:

  [Enter] ipconfig/all

  We are interested in the IP address of the network adapter that you are using (ethernet cabling, wireless network to wireless), IP address of the gateway and DNS settings.

  At the command prompt, enter:

  Ping www.yahoo.com [Enter]

  You get a ping or answer expire?

  5. and finally, to give the answers to:

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?

  Make sure that the computer is clean:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware MS - MVP - Elephant Boy computers - don't panic!

• my laptop has completed the automatic update of vista and after that I can't access wireless router with an ethernet cable only

  My sony vaio laptop running windows vista has completed an automatic update and after that, I can't connect to my wireless network, I can access the internet with an ethernet cable.

  It worked perfectly fine before the update, I know that there is a problem with what I had the same problem in the past. The way it's been solved previously was to restore the laptop to an earlier point before the end of the update. Unfortunately I can't do that and the laptop has been completed, wiped and there is no backup where I can go to restore.

  I know I can remove some updates but don't know what 1, me it is another way to solve the problem.

  Your help would be much appreciated.

  Thank you

  Hi Nadzarif,

  You can try the following steps and check if it helps:

  Method 1:

  Because the wireless stopped working after windows update, you can check the Sony support link and try to install the latest version of the drivers for the wireless card and check if it helps:

  Sony support

  For more information, see the article:

  Update drivers: recommended links

  Method 2:

  Updated version has a problem in the history of the update.

  Step 1:

  You can check in the history of the update for the updates that are installed recently or before the show.

  a. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  c. to display more information about an update, double-click it.

  See the Windows updates are installed

  Step 2:

  Uninstall recently installed updates and install the updates one at a time to understand what update is the cause of the problem.

  For more information, see the articles:

  Remove an update

  Install Windows updates

• Can not access my MSN page the last 36 hours. I get the message "your request could not be processed at this time, please refresh this page or try again later." All the suggestions/help appreciated!

  Nothing has changed on my computer that I know. I use my MSN for my homepage & have had no problems with it before.

  I finally found a solution that worked for me.  I whitelisted and had to disable to My.MSN.com & refresh the page a couple of times.  Strange that it wasn't a problem until 3 days ago - hope this helps some of you!

• How can I access a Web page on my site?

  I entered < domain name > / < name of page > & I have not found.

  I thought about it:

  http://shipsbells.BusinessCatalyst.com/phone/download.html

  If I want the desktop version, I don't include 5876

  What was missing, it was the l in html at the end.

• Can't access oracle home page / 'Get Started' with browser

  Hello. I take an Oracle of the class and do not know much about this help would be appreciated. I will try to provide as much detail.
  
  I use Windows XP and I installed 11 g Express Edition. From there, I tried the "Get Started" link, but I get an error page in my browser/s. I tried to get the url of the homepage on google (http://127.0.0.1:8080/apex/f? p = 4950) to see if others had problems and multiple threads of this forum appeared. I tried some some suggestions and nothing worked. Netstat displays nothing listening on port 8080. I tried to disable the windows firewall. I tried to turn off and restart the process TNSLSNR. It is what comes out on my listener.ora.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
  (= Extproc PROGRAM)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  (ADDRESS = (PROTOCOL = TCP) (HOST = 127.0.0.1)(PORT = 1521))
  )
  )
  
  DEFAULT_SERVICE_LISTENER = (XE)
  
  
  
  
  What should I try next?

  So I guess that this db never ran before?

  May issue of event log screwed up installation, earlier.

  If possible, try installing and reinstalling the beta version of XE.

• Can't access web page

  I can't access any web page. But wifi works. Mail works too. Sometimes I get a message telling me that my laptop could treat Google as an "intruder".

  What can I do?

  Hello

  In this case, the first suggestion I'd make is to completelt uninstall Norton as follows.

  Before doing so, make sure that you have a way to reinstall Norton and all required activation code.

  On another PC, downloaded and Save the Norton Removal Tool from the link below.

  FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  When you have finished, copy this file to a usb flash drive and transfer it to your portable computer - just stick to the desktop.

  Run the removal tool Norton and when it is finished, restart the laptop.

  Check if your browser (s) have now access to the internet - if necessary, reinstall Norton and restart the computer again.

  Kind regards

  DP - K

• 5.4 Lightroom can't access the page import: "internal error - could not find namespace: AgCreativeCloudUtils".

  I just installed Lightroom 5.4 (I use OS 10.10.2), and now I can't access the import page.

  The error message says: internal error - namespace was not found: AgCreativeCloudUtils

  Does anyone know how to fix this?

  Thank you.

  I thought about it. I used 5.4 but installed 5.7.1 so a simple reboot fixed it.

• Access the router cant admin homepage

  I can't access my router admin page.

  I tried this: 192.168.0.1 192.168.1.1 www.routerlogin.net www.routerlogin.com, I used google, internet Explorer...

  model of router: wndr4500

  Can you help me?

  Kind regards

  Xander

  Assign you a static IP address on the computer?

  If you have set it to static, back to obtain an IP address automatically.

  The two IP addresses must be in the same range.

  It is recommended that you access the router admin page using a computer that is connected directly to the router.

• Unable to access WRT1900AC configuration page when it is configured as AP only

  Problem: cannot access configuration page of WRT1900 or by using the linksyssmartwifi or the affected DHCP an address

  Configuration: I have a domain Active directory to manage all devices in my house and customers. MY ISP is uVerse.

  I first installed uVerse and the WRT1900 as being generally configured (uVerse providing DHCP and DNS), my field devices could not resolve the local my AD server domain name. To resolve this problem, I set up my server AD 2003 to act as a router, Server DNS and DHCP (see diagram below).

  In this configuration, all connected via LAN or WiFi devices can see internet and other LAN/WiFi field devices connected.

  The only problem I have is that I can't access the configuration page of WRT1900 or by using the linksyssmartwi or the address assigned DHCP

  The 2003 Server provides DHCP to all devices in the LAN attached including WiFi LinkSys attached devices

  Server 2003 provides DNS name resolution

  

  in my case it seems that the opposite was true.  I reset my router, which is configured as a LAN Gateway and now I can access limited menu.  most applications have disappeared and I can't do basic as things even see who is connected.  Almost everything that is available is to put the passwords for wifi access and the router itself.

  It will not even to change channels or wifi connection protocols.  Shame on Linksys for not properly support their interface.

  The good news is the still phone app works where some of the above items can still be configured (for example, you can configure at least most of the wifi settings)

  Thanks for your help!

• Linksys E3000 - connectivity - can't access Admin setup, etc.

  I had some connectivity issues. I have Cox and a cable modem connected to an E3000 wireless router. Both wireless and direct connections are normally working on my Windows XP computer.

  This morning there was no internet connectivityt. I decided to try to access my router admin page. I couldn't get him. I'm positive, I entered the correct DNS number because it works now. I even turned off wireless to make sure she's trying to connect by ethernet b/c admin wireless access is disabled. This is my main question. What possible reason could I login on my admin page. The router is o. It is plugged it. I even restarted and I still couldn't connect to it? I did an ipconfig/release and / renew and which did not.

  Ok. So I connect my computer directly to the cable modem. My internet is now. It is still a little buggy, but. (In other words, as soon as I open my browser, my google.com homepage says the same thing... without connecttivity. Ok. So, I'm trying to update... It says the same thing. Ok. Then I try another link. It works now. I try google again. It works now. I repeat again and again close and reopen my browser and it's like he's not only the first page you are trying to open.)

  But, I digress. It's the router. So I set about how it was - Internet through the router to the computer. Now, magically, it works, and I can access the Web page and admin?

  So, why couldn't access my router page before. Cox is this coming Tuesday? Does this sound like something is wrong on their end or is it the router.

  Router about a basic configuration, but I don't change the IP start and the range of IP addresses to include only 6 possible connections.

  Yes. I tried everything but now the buttong reset for 30 seconds. Instead, I just unplugged. Nevertheless, there is STILL NO REASON I wouldn't be able to connect to my router a minute and the next minute I can? And the only thing that changes is that I disconnected 1 Ethernet and then plugged it back it later. Unless it was a bad connection or a cable, but I checked that already.

  Forgotten. No help here.

• WRT1900AC: Cannot access the router remotely

  This can be a simple, but I'm scratching my head on it.

  I just took a 1900 for my personal use at home. I did a basic auto config (Nothing fancy, just Plain Jane).

  As part of the configuration process, I associated the router to a Smart Access account that is different from that assigned to the routers in my church.

  For some unknown reason, I can not access the router using the Smart app unless I am accessing Internet through the 1900. If I have Internet access through my Verizon FiOS router, the Smart application tells me that my wireless router is offline.

  I missed the 1900 and started from scratch using my office... again... combining the unit on the account. Once again, no luck.

  I have a session with my smartphone and tried again with my tablet. Still no luck.

  Just to make sure that there is no failure, I tried to access the routers of the Church... and has been able to do without any problem.

  Y at - it an option that I forget? I don't remember running into this situation when you configure the 6500 s and 6900 s.

  10,168 is also a private IP address.

  I recommend that you enter this address that you see on the WRT router in DMZ ISP modems. If there is a reservation on the ISP modem function, book it as well so it can't change it later. This will keep the DMZ address for the WRT router and you should be good here.