xw8400: memory from 8GB to xw8400 / xw8600?

Similar Questions

• xw6400 xw6600 xw8400 xw8600: Trim SSD support pilot solution ESB2 xw workstations

  EDIT: IT TURNS OUT THAT THIS PROBLEM EXISTS IN THE W10PRO64 INSTALL ON HP XW WORKSTATIONS AND PROBABLY OTHERS.  SEE THE MAIN 7/16 MESSAGE.

  I worked on a project to help another Member of this forum, and just made a significant breakthrough related to workstations xw, their storage and support TRIM SSD controllers driver version.  I discovered this when working with Hard Disk Sentinel Pro version 4.60, the free trial version.

  It turns out that the Sentinel program can probe a SSD and see what parts of the usual special OS components for the optimization of the SSD are installed, and especially if DECORATIVE knowledge for the SSD is really at work.  In their FAQ, they explain that the operating system can have the function TRIM supported, but this PAD can actually be disabled despite the operating system having received the appropriate command to turn it on.  This is due to hardware (storage controller chipset is perhaps simply not able to do) or software (the version of the driver for this chipset may be unable, but a newer driver may operate properly).

  I fell exactly this problem of driver and bet that few of us knew that this might be the case.  Xw6400, xw6600 and xw8400 xw8600 workstations that all use the same storage ESB2 controller chipset and the xw6600 I was working on a series THAT SSD Intel 320 returned a response to my probe with Hard Disk Sentinel TRIM was supported but disabled.  Another xw6600 with SSD even reported THAT TRIM has been supported and active.  The first was using ESB2 8.6.2.1315 drivers older drivers and the second was using my 'best' favorite ESB2 drivers 10.0.0.1046.

  I ran the normal TRIM check control on the first xw6600 (DisableDeleteNotify fsutil behavior query) and she came back from 0 (which means the TRIM is enabled in my W7Pro64 OS).  Run the cmd as administrator, using an elevated command prompt.  It turns out that 0 operating system response does not mean THAT TRIM is currently working... it just means that it might work if the hardware and the driver have both were sufficient.

  I then updated my driver storage controllers ESB2 via Device Manager for the 64-bit version 10.0.0.1046, re-directed Hard Disk Sentinel, and now have TRIM both supported and active.

  This is an important finding... goal before, with the ESB2 8.6.2.1315 drivers, I could manually run the TRIM of the Intel ToolBox software, but now the operating system can run TRIM automatically, at regular intervals.  I'm just happy that I had already set on this 10.0.0.1046 defined as my drivers of go - to for clean installs a long time ago.  Those who, moreover, are not what you get the installer of HP DVD.  I got them from Intel.  Target the x 64 folder of the Device Manager for travel it driver update method, assuming you are using a 64-bit operating system.

  Note the arrows below, with 3 photos showing (1) a version clone on a disk of a source image of HARD drive, then (2) a clone of build on an SSD of the source image to HARD drive (with the old drivers) and finally (3) build a clone on a SSD HARD drive (with these new drivers installed) image.

  

  Former pilots and note that Acronis or operating system specific SSD components added automatically:

  

  Now, with the 10.0.0.1046 new drivers:

  

  You can use a trial version of Hard Disk Sentinel to confirm whether or not your SSD TRIM feature works actually automatically operating system and if not then try some new drivers of storage controllers and check again.  I found Hard Disk Sentinel to be rather intrusive, so do not keep not installed other than for this type of test.

  I have prepared a number of HP W7Pro64 xw workstations running the activation of W10Pro64 and stumbled upon the fact that the W10Pro64 standard install places older drivers of storage in the setup controller have been recorded previously in W7Pro64 moved to 'support' TRIM but do not have automatic controlled by regular OS TRIM SSD feature enabled.  It has, instead, been 'disabled '.

  It's one thing to manually run TRIM once a month, but you should really have the OS taking care of this task and do not forget.

  For HP workstations that use the storage controller chipset ESB2 and emulation of BIOS SATA value 'RAID + AHCI' or 'RAID' If this other option is not available (same driver install results, whatever) there is a problem.  I have not studied upward in the ZX00 or ZX20/ZX40 generations yet because they use other chipsets and drivers for this task.  ESB2 chipset workstations include the xw6400, xw8400, xw6600, xw8600, more a lot more HP.

  The W10Pro64 install results in automatically install the driver of ESB2 being 8.6.2.1025 with driver date 10/08/10.  With a Hard Disk Sentinel program detects that TRIM SSD is supported but not active:

  

  After updating the driver for the 10.0.0.1046 more recent version, dated from 13/09/10, the TRIM feature for the operating system has been both took in charge and active:

  

  I found Hard Disk Sentinel a tool valuable, but a little intrusive, so I install only to such experiences and then uninstall.

  Thus, greeting take is the same for these workstations running W10Pro64 it was when they are run under W7Pro64 (see above messages, 1/16).  Update the 10.0.0.1046 storage ESB2 if controller driver version you want as your SSD that will be automatically triggered by W10 for cleaning PAD regularly.

  Who remembers to do it manually?

• upgarding memory from 4 GB to 8 GB

  Can I upgrade my MacBook Pro 13 "mid 2012 memory from 4 GB to 8 GB? How much can it cost to change? and there will be an increase in the speed of my mac after upgrading memory?

  Koushiksep27,

  Yes, you can upgrade your MacBook Pro 13 "memory. In fact, you can go to 16 GB. Here's the cost in relation to the various options.

  Yes, there will be improved performance of note.

  

• I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) bu

  I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) but not tif files? Very frustrating. Tried to install the new updates but my creative cloud is just a blank page?

  Hello

  I think you are referring to the white empty window of CC desktop application.

  Please refer to the threads below where this issue has been addressed:

  Creative cloud is empty window why?

  Cloud Desktop App is empty?

  New application Cloud Creative unusable: it is empty!

  Re: Empty opening creative cloud app

  Kind regards

  Sheena

• Reservation of memory from system resources

  I use monik part of backup tools, and there is a best practice to change the setting of the CPU and the memory at 1500 MHz and 800 MB.

  In the next page of VMware KB, there is a description to change the allocation of memory, only in ESXi 4.1, there is no material cofiguration option > memory.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003501

  But in configuration > system resource allocation, I can set the CPU and memory, is that the same allocaiton memory for the ESXi console?

  On this tab, we have generally fine tune the allocation of resources for this host. But this sentence anyone unless someone has encountered a problem. For the parameters of the ESX host we usually set the value in memory and CPU for the console of any third-party application or service that makes us turn on this host.

  In the case of ESXi, if big it seems people leave just as Norbert has asked to change by a seller of 3rd party app.

  Please refer to this article which contains details about the reservation of memory from system resources

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1012002

• How to increase the video memory from 64 MB to 128 MB on Satellite Pro A60

  Hello
  My A60 video ram has a solution integrated with 128 MB memory. How can I increase my video ram from 64 MB to 128 MB

  Your device has shared graphics memory card and if you check the display properties > advanced > framebuffer, you can change the framebuffer between 32 and 64 MB.

• HP g72 i3 m350: upgrade memory from 4 GB to 8 GB

  I received two chips memoy 4 GB and they would not work.  Verifed that they were seen by the system, but the system would not start.   Removed and tried a single, same problem.  Replace both 2 gb and it worked.   It seems unlikely that both are bad.

  This device should recognize and work with 8 GB or 4 gb chip, as it of a 64-bit using intel i3 and works win10 and do quite well with 4 GB but took the opportunity to upgrade and did not expect this problem.     Replacement chips come from a list, including the
  G72 and ar 4 GB ddr3 pc3-10600 sodimm / 1333 mhz which corresponds to the use of 2 GB.

  The point on this issue.   It is not resolved, but I decided to try the memory in another HP using an AMD processor that was older and a bit slower but it agreed to the memory and is very good in this unit of work.   It is interesting that the unit is NOT listed as being able to accept additional memory.

  The issue is clearly with this single unit, and it seems others have had a similar event.   While it is apparently isolated to this version of the G72.

• The image display memory from the phone to my apps?

  Hi all

  You want to get the image of the phone memory and display the selected image in my applications.

  1. I get the path of the image to the selected image memory of the phone.

  2 How to display the image at my applications using the path of the selected image?

  Please let me know how to achieve this.

  Kind regards

  NGO

  Hi all

  Thanks for your reply...

  http://StackOverflow.com/questions/8982893/how-i-can-get-image-from-Gallery-in-BlackBerry

  My requirement is already set at the link above...

  Kind regards

  NGO

• video memory from 64 M to 128 M

  I have a netbook new of ideapad S10-2 with 1 GB of system memory, and I would like to change maximum gma 950 video memory to 64 megabytes (by default in my netbook) to 128 Mega. I can't do it in the bios menu: not available. And I have more than 128 Mega video memory Intel gma 950 chipset support.
  I have not found any post from 2009 until today with this information.

  BIOS version: 1ACN20WW (V1.11)

  THIS Version: 1AEC20WW (V1.11)

  Thank you, jorge

  Hello and welcome...

  You updated the BIOS to last? For S10 - 2 is newer BIOS 24

  IdeaPad S10-2
  Version 24
  File
  1ACN24WW.exe
  http://consumersupport.Lenovo.com/US/en/DriversDownloads/drivers_show_1590.html#.
  Summary of changes
  ==================
  Enabled the "Exécutable Disable Bit".
  Fixed abnormal CV of the issue of standby mode.
  Fixed battery low beep can be muted.
  Fixed the problem of sending analysis code twice using the combine-key (Ghost) on an application.
  Add the function beep plug/unplug AC secret.
  -----

  .. All Board BIOS update:
  Press F2 to the computer to get in the BIOS switch...
  After the update of the BIOS, when in the BIOS, press F9 for default configuration at first...
  Then set Config for the BEEP/QS/Sata/AHCI BOOT sequence & together...
  1.USB device - DVD/CD
  2. USB - HARD drive (or! to boot from USB-Flashdevice)
  3. HARD DRIVE
  FN + F7 to use NUM-Lock + / changing

  Go to the menu with the arrow keys
  ESC to exit
  Save F10 and exit

  ----
  Intel Graphics Chipset 950 can choose 8 MB up to 256 MB variable depends on the installed memory (1 GB / 2 GB) & operating system (XP / W7)...

  Use of graphics looks like this:
  -251 MB total graphics memory
  0 MB - dedicated video memory
  memory video system - 64 MB
  -187 MB shared system memory

  ---

  cordially KalvinKlein

• Satellite 2450-201: how to increase the video memory from 32 to 64 MB?

  Can anyone help? I looked in the Bios and the advanced settings screen, and found nothing to increase the size of the video memory.
  Any other way to find on my Satellite 2450-201

  Hello

  As far as I know that the unit has been delivered with the NVidia GeForce4 420Go 32 MB graphics card. This isn't a memory sheared graphics card.
  The card supports the own memory and not a function of memory sheared.
  In this case, you cannot change the value of memory.

• EliteBook 8540p: upgrade memory from 4 GB to 8 GB

  Hello.

  For the moment, I use memory 2 x 2 GB strips with my elite book but want to switch to 2 x 4 GB.

  I know that my laptop is supported (only) PC3-10600 / memory at 1333 MHz, but I wonder if I still can't use more quick PC3-12800 / 1600 modules MHz but only gain rate supported, or is it takes exactly PC3-10600 / 1333 MHz modules?

  I can change some values in the BIOS if it recognizes the fastest memory modules but works at the speed of support or should I rather get the 'right' modules and forget them faster?

  NeoPop wrote:
  

  Hello.

  For the moment, I use memory 2 x 2 GB strips with my elite book but want to switch to 2 x 4 GB.

  I know that my laptop is supported (only) PC3-10600 / memory at 1333 MHz, but I wonder if I still can't use more quick PC3-12800 / 1600 modules MHz but only gain rate supported, or is it takes exactly PC3-10600 / 1333 MHz modules?

  I can change some values in the BIOS if it recognizes the fastest memory modules but works at the speed of support or should I rather get the 'right' modules and forget them faster?

  Hello

  I would get a few modules of 1333 MHz (recommend Corsair). We cannot change everything related to memory in the BIOS.

• Upgrade memory from 256 to 512 MB on Satellite Pro A60

  Just want to confirm really what I got caught once before buying the bad memory. I read another thread, so am sure I'm ok with that.

  OK, the RAM, I need for the upgrade of the Satellite A60 Pro is:
  200-pin SODIMM, DDR PC2700 Unbuffered CL2.5 (Non - ECC)

  Maplin:
  http://www.Maplin.co.UK/search.aspx?criteria=A31CG&doy=24m12
  A31CG DDR 2700 512M SODIMM

  Crutial
  http://www.crucial.com/UK/store/mpartspecs.asp?mtbpoid=04FE6CD8A5CA7304
  512MB 200-pin SODIMM, DDR PC2700 upgrade for the Toshiba Satellite Pro A60 Series notebook

  I don't think that 1GIG RAM is needed for my daughter :-)

  Note: On my main PC, I got defective Crutial Ballistix memory, but Crutial were very good replacing it for free.

  Thank you and a Merry Christmas and a happy new year to all of you on this forum.

  Ah, just another thing I'm not clear on.

  The NEW RAM replaces the existing, in other words I have remove the 256 and replace it with the 512? Reading the user manual, it is not clear and talks about expansion module. Probably, it would be obvious if I opened it to the top, but I'd rather not at this stage.

  Thank you

• Satellite A70-S249: how to change the video memory from 64 to 128 MB

  all RNS
  I have an A70-S249
  in the user guide, it says that I can't adujst tha vedio memory
  64MB ATI MOBILITY Radeon IGB 9000\9100 to 128 MB
  but tone did not say how I can do it.

  If anyone can tell me how to do?

  (my bios is phonex 1.5)

  thanx

  Hello

  If your card supports 128MB value then it should be possible to increase it.
  Check the properties of the graphics card. Use the advanced option.
  You should see the tab called "Frame Buffer"
  There, it should be possible to change the size of the AMU.

• Upgrade memory from 2 GB to 4 GB on Satellite U300-153

  Satellite U300-153 (PSU30E - 09901CG 3) has maximum of expansion RAM 2 GB only.
  This model has 2 slots for memory and each unit of memory 2 GB of suppor slot.
  If I install a 2 GB unit in a slot - everything is OK.
  2 Gb + 1 Gb or 2 Gb + 2 Gb: BIOS detect memory correctly but the crash of Windows Vista for
  blue screen after 2-3 seconds after loading.

  I know about 2 GB limit but can I change something (BIOS upgrade or LIKED) to change this limit?

  Why BIOS can detect 4 GB but charge Vista RCA with it? Deadline is - what chipset?

  Can I fix it and what I should do?

  Hello

  As you say the laptop U300-153 can scale up to 2 GB max.
  I really surprised that the BIOS has detected that more than 2 GB and that the laptop was able to boot in windows. Usually the laptop should not start and begin with more than 2 GB of memory

  > Why BIOS can detect 4 GB but load Vista RCA with it? Deadline is - what chipset?
  > Can I fix it and what I should do?

  Usually it s a physical limitation (motherboard). and you will not be able to upgrade the memory to a higher value is not possible!

  Welcome them

• HP 350 G1: updated memory from 4 GB to 8 GB

  Hello

  I have a HP 350 G1, which came preistalled with 4 GB Ramaxel RMT3170EF68F9W - 1600 (HP partnr 691740-001).

  I try to add a module from a MacBook from Apple 4 GB Ramaxel RMT3170EB68F9W-1600. The two modules are PC3-12800

  Is not work eather with the other module of 4 GB or as a single module.

  Is the default module or can it be something else, that I am not aware off the coast?

  Thnx

  @Paul_Tikkanen I checked the pages of product for both models and they are 1.35v. As I said the specs are identical for both modules.