Error login as new user - no entry in the registry key "ProfileList.

Similar Questions

• I can't create a new user account (Windows 7): the user profile service service has no logon

  I tried to create a new user account, but I get the following error when I try to open a session with him:

  the user profile service service has no logon

  Until I leave than anything more I will add that I activated the hidden administrator account and this is the account I use to create a new standard user account.

  Most of the patches for this issue are due to the fact that delete manually a user account does not remove the registry key that are associated, and you are required to go to the next section of the registry:

  HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\WINDOWS NT\CURRENTVERSION\PROFILELIST

  and delete the key associated with the user account to be deleted.

  This fix IS NOT help, because whenever I try to create a new user, Windows doesn't bother creating a registry key to the new user.  The new user account appears in the account management window.  If I right click ondesktop and select Properties, then the settings , select the Advanced tab and click settingsunder USER PROFILES, the new account appears not here no more.

  It is a huge problem.  I have other people who use this laptop and I don't want to use my login information, or the guest account.  I'm not editing the registry just to make a new account.

  Please tell me there is a fix for this that works.  Windows 7 was not free, and this kind of problem is very frustrating for the premium software.

  Thanks - this is the only tip that help me to find the solution to this problem.

  Two files in the folder C:\Users\Default\AppData\Local\Microsoft\Windows Live could not be copied without administrator privileges.  This caused the connection in the attempt fail for all newly created user accounts.  The files are:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  I've added the read permission for all users in these two files and retried the logon.  The opening of session proceeded set up initial user and filled perfectly.  Probably, this problem started when I installed Windows Live Messenger which is the only Windows Live application, I installed.

  Other important in your message board was to check the event log which stressed the two files which could not copy.  Otherwise provided in WARNING messages immediately preceded files event log error message indicates that the profile service could not connect.

• Updatususer new user on PC. The user does not appear in the user accounts. It is said that the account was 9 hrs + connected. Is this a virus or some backdoor account made kids?

  Original title: Updatususer

  I was checking the parental control to see what children are in and I found this new user in there.  The user does not appear in the user accounts.  Updatususer, is the name.

  I tried to access any information in the file, but I see no file... even if it is said that the account was 9 hrs + connected.  Is this a virus or some backdoor account made kids?

  Thank you

  It seems to be used by a program to update NVIDIA.

  http://forums.nvidia.com/index.php?showtopic=178965

• I just added a new user and it says the e-mail was sent, but the user has not yet received it. Y at - it a period?

  I just added a new user and it says the e-mail was sent, but the user has not yet received it. Y at - it a period?

  Anyone had this same problem? I'm doing something wrong?

  Hi Jesse,.

  Please follow did not receive expected Adobe email

  I hope this helps!

  Kind regards

  Sheena

• First New - VM: an element with the same key has already been added.

  
  I get a strange error that I have seen a few other posts, but with no resolution (or at least one that I can find).  When you try to create a new virtual machine using the cmdlet New - VM, I get the error "an item with the same key has already been added."

  Now, here's the key that I've not seen many others to mention.  This ONLY happens on the first attempt for each new connection with Connect-VIServer.  I can create as many of the same machines that I want after that first mistake with the same settings (new name of course).  If I disconnect and reconnect again, the error appears for the first time.

  Normally with PowerShell, I have just to catch the error and be on my way.  However, in this case I use the parameter - RunAsync, so that I can capture the task that is returned in a variable.  From there, I use Wait-task until the virtual machine is complete before moving on with the script.  Everything works fine when the error occurs, but when it happens that the object of the task is not returned and the rest of her vomit script errors.

  I am running the latest version of PowerCLI and I tried this on PowerShell v2.0 and v3.0 and get the same results.  I tried different models and guests without success.  I also tried this with and without assistance - AllLinked on Connect-VIServer-bound mode.  I should mention that I am cloning model, by specifying a spec customization and host cluster data store.  Again, the only common denominator repeatable here is that this ONLY happens on the first attempt to use New - VM session to vCenter.

  Any ideas or suggestions?

  If this is useful at all, here are the details of the output on the exception:

  PS C:\ > $Error [0]
  New - VM: 05/06/2013-09:49:22 new-VM an element with the same key has already been added.
  On line: 1 char: 11
  + $VMTask = new-VM-name "NEWTEST20" - model 'Template' - OS...
  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  + CategoryInfo: NotSpecified: (:)) [new-VM], VimException)
  + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM

  PS C:\ > $Error [0]. Exception | Select *.

  
  ErrorId: Core_BaseCmdlet_UnknownError
  ErrorCategory: NotSpecified
  TargetObject:
  RecommendedAction:
  SessionId:
  Login ID: /VIServer=USERNAME@SERVER:443/
  Severity: error
  Message: 05/06/2013-09:49:22 new-VM an element with the same key has already been added.
  Data: {ParameterValues}
  InnerException: System.ArgumentException: an item with the same key has already been added.
  to System.Collections.Generic.Dictionary'2.Insert (TKey key, TValue value, Boolean add)
  at VMware.VimAutomation.ViCore.Impl.V1.Service.StaticDataServiceImpl.PopulateTaskDescriptionDict
  ionary()
  at VMware.VimAutomation.ViCore.Impl.V1.Service.StaticDataServiceImpl.GetTaskDescription (String
  taskDescriptionId)
  at VMware.VimAutomation.ViCore.Impl.V1.Task.TaskImpl.Create (ManagedObjectReference moRef,
  Customer VimClient, accessories 2 dictionary, extensionData object)
  to VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCoreServiceProviderImpl. < GetTaskListForCli
  ENT > d__7.MoveNext)
  System.Collections.Generic.List to ' 1.InsertRange (Int32 index, 1 IEnumerable collection)
  at VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCoreServiceProviderImpl.GetTaskList (IEnume
  uidList Maple 1, IEnumerable 1 connectionUidList)
  to VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskServiceImpl.GetTaskList (IEnumerable 1 uidList,
  IEnumerable 1 connectionUidList)
  to VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTaskCore (Nullable State 1,)
  IList 1 connectionUidList)
  to VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTask (Nullable State 1,)
  CmdletTaskInfoProvider cmdletTaskInfoProvider)
  at VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTaskById (String uid,
  CmdletTaskInfoProvider cmdletTaskInfoProvider)
  VMware.VimAutomation.ViCore.Impl.V1.Service.VmServiceImpl.NewVM (model TemplateInterop,
  VMHostInterop vmHost, string name, resourceContainer, FolderInterop location VIContainerInterop,.
  StorageResourceInterop data store, Nullable 1 diskStorageFormat, OSCustomizationSpecInterop
  customization, Boolean, Boolean, string 1 Nullable description isRequestedAsync allowNested
  Nullable, 1 haIsolationResponse, Nullable 1 drsAutomationLevel, haRestartPriority, [AdvancedOption]
  options)
  to VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM.DoWork (customer VIAutomation, moList list 1)
  at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseCmdlet.DoWork (VIConnection connection,
  MoList list 1)
  at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdlet.DoWorkEx (VIConnection connection,
  MoList list 1)
  to
  VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.ConnectionDispatchHelper.ExecuteRunlist (dictionary 2
  runlist, DoWorkDelegate doWorkDelegate, UidDispatchHelper uidDispatchHelper, result of list 1)
  TargetSite:
  StackTrace:
  HelpLink:
  Source:

  PS C:\ > $Error [0]. Exception.InnerException | Select *.

  
  Message: An element with the same key has already been added.
  ParamName:
  Data: {ConnectionId}
  InnerException:
  TargetSite: Void Insert (TKey, TValue, Boolean)
  StackTrace: At System.Collections.Generic.Dictionary'2.Insert (TKey key, TValue value, Boolean add)
  to
  VMware.VimAutomation.ViCore.Impl.V1.Service.StaticDataServiceImpl.PopulateTaskDescriptionDictionary)
  at VMware.VimAutomation.ViCore.Impl.V1.Service.StaticDataServiceImpl.GetTaskDescription (String
  taskDescriptionId)
  at VMware.VimAutomation.ViCore.Impl.V1.Task.TaskImpl.Create (ManagedObjectReference moRef,
  Customer VimClient, accessories 2 dictionary, extensionData object)
  to VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCoreServiceProviderImpl. < GetTaskListForClient
  > d__7.MoveNext)
  System.Collections.Generic.List to ' 1.InsertRange (Int32 index, 1 IEnumerable collection)
  to
  VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCoreServiceProviderImpl.GetTaskList (IEnumerable 1)
  uidList, IEnumerable 1 connectionUidList)
  to VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskServiceImpl.GetTaskList (IEnumerable 1 uidList,
  IEnumerable 1 connectionUidList)
  to VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTaskCore (Nullable State 1,)
  IList 1 connectionUidList)
  to VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTask (Nullable State 1,)
  CmdletTaskInfoProvider cmdletTaskInfoProvider)
  at VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTaskById (String uid,
  CmdletTaskInfoProvider cmdletTaskInfoProvider)
  VMware.VimAutomation.ViCore.Impl.V1.Service.VmServiceImpl.NewVM (model TemplateInterop,
  VMHostInterop vmHost, string name, resourceContainer, FolderInterop location VIContainerInterop,.
  StorageResourceInterop data store, Nullable 1 diskStorageFormat, OSCustomizationSpecInterop
  customization, Boolean, Boolean, string 1 Nullable description isRequestedAsync allowNested
  Nullable, 1 haIsolationResponse, Nullable 1 drsAutomationLevel, haRestartPriority, [AdvancedOption]
  options)
  to VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM.DoWork (customer VIAutomation, moList list 1)
  at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseCmdlet.DoWork (VIConnection connection,
  MoList list 1)
  at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdlet.DoWorkEx (VIConnection connection,
  MoList list 1)
  to
  VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.ConnectionDispatchHelper.ExecuteRunlist (dictionary 2
  runlist, DoWorkDelegate doWorkDelegate, UidDispatchHelper uidDispatchHelper, result of list 1)
  HelpLink:
  Source: mscorlib

  
  

  I was informed that this is actually a "known" bug and a fix has already been planned for the release of the future code.  After getting the access to a beta version, it does not seem to be fixed in the next release.

• Cannot write to the registry key for Acrobat XI - Error 1406

  Hi all

  I have a problem regarding the installation of Adobe Acrobat XI 11.0.07 on a laptop with Windows 7 Home Premium OS.

  In short, I cannot complete the installation of Adobe Acrobat XI on this machine because Acrobat is not able to write the value to the registry key that is located here:

  HKEY_LOCAL_MACHINE-> SOFTWARE-> Microsoft-> Internet Explorer-> toolbar.

  I tried to find solutions on the internet and found a Web page on the Adobe Forums, which is this: Error 1406.Could not write the value Adobe ARM - and it was not very useful, since the person requesting to solved his problem, but did not say how he did. So, I found this page using Acrobat, called Error 1402. Error 1406. Acrobat, Reader where I tried different solutions, but so far none of them have worked. What I did to remove all previous versions of Adobe Acrobat, Reader, Air and so on. In fact, I deleted all Adobe software, in which case one of these programs were to blame, but it did not work. Before that I have deleted all this software, I deleted Acrobat and Reader several times, but you have probably already found, it did not work. As it did not work, I tried the following solution using Acrobat, which was to 'Set permissions to their default values in the registry'. I followed the solution completely and does what he says, but it did not work. As a note, I must say that the type of registry key with that I have a problem called 'Locked', is a REG_DWORD type and the data value is (0). That this has something to do with it? I'm not too familiar with editing the registry. However, I tried to change the value of (1) and updating the registry, but it did not work...

  More information: However if I install the full version of Adobe Acrobat XI or the default installation, the same error pops up: Error 1406. I scan my system with my antivirus Bullguard software, to see if there is no virus. There are not. Also, I closed my antivirus software and turned off the firewall of Bullguard, but this was not successful either, I did a scan of my system using cmd as administrator (sfc/scannow) and the program found a few mistakes, he could not fix. As far as I can see, he finds three files .dll with errors. I have the document called sfcdetails.txt if it would be very useful for you.

  In addition, I don't know what to do. I paid for Adobe Acrobat on 23 January 2015 and I failed to make it work properly again, and I can't update the software, because I have a problem with the registry. I am able to use the software for that I had to use it to so far, but I would like to be able to use it for what it represents and update in order to avoid any lapse in security.

  Thank you. I hope that you have some ideas for my problem and will be able to help me!

  Best regards

  Mads

  Hello Rahul,

  I found a way around the problem I described in the post. What I did to reinstall Adobe Acrobat XI and do not install the PDFMaker for Internet Explorer, and this solved the problem! And since I do not use Internet Explorer for PDF do, it's good for me, and now I am able to update to Acrobat. But for people who would like to use Internet Explorer for making PDF, it is of couse is not suitable... But for me it is. I still don't know how to solve this problem. It might have something to do with the fact that Adobe Acrobat XI is not able to support Internet Explorer 11, but this was written by a user on the Adobe forums, so I don't know if it's reliable. The "help Acrobat / compatible browsers and applications of PDFMaker Guide" immediately said that he made, but I'm not sure. Maybe it's a compatibility issue?

  in any case, thanks for the answer you gave - but I found myself

  Best regards

  Mads

• TB 31.5.0 Win 7 after the TAB key for the automatic update no longer creates new address line "write" (enter the done key) but I want the TAB key! Why this keep happening after

  TB 31.5.0 Win 7 after the TAB key for the automatic update no longer creates new address line "write" (enter the done key) but I want the TAB key! Why is - this seems to happen after each automatic update? Cant we get 'option' to use the TAB key to navigate through the lines of address "write"?

  TAB through the fields that exist. It is the function of the TAB.

  Otherwise you could never use TAB to go out in a field for example: subject. It would create an indefinate number of fields and are unable to function as a TAB key.

  TAB does not back to THE fields,
  New crests to THE fields or donkey typing/selection enter/return address, you can use the selection of mouse click.

• Try to uninstall build Munki 3.1, does not work and leaves several entries in the registry

  When I try to remove build Munki 3.1 a few days ago. However, direct the directory uninstallation fails generally as the Build Munki 3.1 leaves several entries in the registry of the computer. How should I do?

  * original title - how should I do? *

  Hi jacob,

  If the standard uninstall process is not working (as seems to be the case), then try to use the free Revo: http://www.revouninstaller.com/revo_uninstaller_free_download.html that often works when the usual process does a complete job.  I know for a fact that in advanced mode, there's a special process which deals expressly with clean up the leftovers of the program register.  Personally, I use Revo to uninstall everything that I want to uninstall (more with AV products special removal tools) because almost all normal uninstall process leaves something behind (I had to remove the remains on almost each uninstall I made using Revo) and this will keep my own system.

  If you have already uninstalled to the point that it does not appear as an option in Revo, then reinstall again and then uninstall with Revo in advanced mode and this time and that should do the trick.

  I hope this helps.

  Good luck!

• Try to set up Time Machine, and I get this error; Keychain 100001 error while creating a system Keychain entry for the username "JGarrett" and the URL ' afp://JGarrett@JPG Capsule._afpovertcp._tcp.local./Data time airport.

  Have cleared airport Time Capsule and factory reset after getting this message.  Don't know where to go with it.

  Some files have a property incorrectly together which will prevent them from being changed or deleted when the system is running. This property cannot be removed in recovery mode. If you do not feel that you can do this yourself, please someone more experienced to help you get.

  1 back up all data. There are ways to back up a computer that is not fully functional. Ask if you need advice. Don't skip this step.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags norestricted /V*/*/L*/Keyc*/*

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo xattr -c /L*/Keyc*/*

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the same Terminal window. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and start over.

  Wait for a new line ending with a dollar sign ($) below what you entered. You can then quit Terminal. Test.

• Update the column values with the new user who has changed the data in the current line

  I have a table, the following structure.
  
  CREATE TABLE FILTERCALENDAR1
  (DATE OF THE "C_DATE',
  NUMBER (1,0) 'DAY_OF_WEEK ',.
  NUMBER (1.0) "WEEK_WINDOW."
  NUMBER (1.0) "MONTH_WINDOW."
  NUMBER (1.0) "YEAR_WINDOW."
  NUMBER (1.0) "DATE_YEAR_WINDOW."
  NUMBER (1.0) "ONCE_WINDOW."
  VARCHAR2 (25 BYTE) "USERNAME."
  "LASTUPDATED" DATE
  );
  
  Problem:
  If a user changes the value of one of the columns I want to write his name to user and sysdate in the 'USERNAME' and LASTUPDATED' columns.
  
  * Tried: *.
  I tried an update trigger for this problem, but I get an error table mutation.
  
  The one you suggest how can I achieve this.
  
  Concerning

  Use BEFORE the UPDATE trigger

  CREATE OR REPLACE TRIGGER myTrigger
  before UPDATE ON FILTERCALENDAR1 FOR EACH ROW
  BEGIN
  :new.USERNAME := user;
  :new.LASTUPDATED := sysdate;
  END;
  

• Created the new user account, and now the settings are gone.

  Accidentally, I created a new user in my previous account admin account, and now all of my settings are gone, as well as all the files on the first account. Is there a way I can return to my old account, or restore the files and settings? Either way, I run Windows XP. Help, please.

  You might be able to try a system restore to before you created the user account.
  Track information to restore the system in the KB article below:

  Article number: 2534454 - how to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/2534454
   
  I hope this helps.

• Strange entries in the registry.

  I'm comfortable enough and with the understanding of what I see in the registry.  However, I see something that appeared recently, and I hope someone can explain it.  Spybot Search Destroy & my AV and Windows Defender program do not react to it.

  Heres a key export.  It is located right under HKCU:

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\1T2G8nRaQwTxZ0JATGxkTNuLSVE =]
  "S + 3mJJ + / rgnur89c4dAZphKIAEg = cDjU7w '=' == '.
  'WipXDJTKFccNtjR1SxdtbczrVpE = cDjU7w '=' == '.
  "S8/Uf3QfMu1vaY5oZVIDjE4nN9g is"is"djg ="
  'rGrpoHYhSsSpQuAVzTPRPPKdt6o = '=' sO40jB1NygE ='
  'O7U2osiUuHko0i9E5CW7QasGlvw = '=' A9tQCIq44sf4TxTcbwl1qXguW0w ='

  I have four other keys under HKCU as well who are of the same form.

  Brian Tillman [MVP-Outlook]

  None of these tools noticed entries.  I am more convinced than ever to simply export the keys to the case where and remove them.  Thanks for the suggestions.

  This well at least now you know that you are free of bad guys!

  Try to back up and then delete and see if, after trial and error what app will complain when it is absent.

  NASS - http://www.nasstec.co.uk

• Error 1402 etup cannot open the registry key

  Original title: how to fix this? Error 1402.

  Error 1402. Setup cannot open the HKEY_LOCAL_MACHINE Explorer\Main\FeatureControle\FEATURE_RESTICT_ACTIVEXINSTALL registry key.

  Problem is now solved, all I had to do was to give me permission to Board on the FEATURE_RESTICT_ACTIVEXINSTALL folder in the registry.

  Thank you

• Windows XP hangs just at the login page (no user connects directly to the)

  I turn my laptop on and the windows splash screen loading; It goes on the login screen (the blue for windows XP). All this shows is the windows xp logo on the login screen. Since there is no user he should directly be connecting to my welcome screen user

  Thank you.

  Well I repair install, and had the files saved on my HARD drive yet so ill just be copying the directory like offshore and put them on my desk.

  Thanks anyway hope this helps

• new user email ok except the habit of reading user's outlook again

  I don't know if this an outlook 2007 or windows vista since it's two programs.

  I created a new account for my wife in outlook and made her a separate user under windows.  Mail sent to it is received on MY outlook.  Everything seems to go OK.  Any ideas. ? I think it's a simple checkbox in one of the programs or it is a compatibility issues.  It is hard to believe that it would be the other.  Surely, what I want to do is already done on thousands of machines.

  I don't know if this an outlook 2007 or windows vista since it's two programs.

  I created a new account for my wife in outlook and made her a separate user under windows.  Mail sent to it is received on MY outlook.  Everything seems to go OK.  Any ideas. ? I think it's a simple checkbox in one of the programs or it is a compatibility issues.  It is hard to believe that it would be the other.  Surely, what I want to do is already done on thousands of machines.

  Quote: mail sent to it is received on MY outlook.
  It's because you all have two same email address ?

  I had Outlook 2007 trial version for 60 dyas, not more. What I'm saying now is my memory...
  Open Outlook > tools > Acct settings > change > next > Internet settings > Advanced tab check "leave a copy of messages on the server" > OK
  That is: your wife will receive its emails. BUT which prevents you from doing his emails too.
  Why? Because both of you have the same address.

  In my view, there are a Message rule to divert the emails to the user, but don't hold me to that. I don't remember the part.
  See if you can find this option by... Tools > rules and alerts

  t-4-2