Y450 not showing volume indicator

Similar Questions

• HP Pavilion dv7-3170ez: volume indicator not showing when the volume control

  Hello

  I own a Pavilion dv7-3170ez and when I change the volume using the slider button in the volume on top of the keyboard, the volume is adjusted accordingly, but no volume indicator appears on the display.

  Previously, when you adjust the volume, a speaker icon with a cursor jumped in the middle of the screen showing the current volume level.

  I use Windows 7 Home Premium and Windows Update and HP update shows that I have the latest version of the software. Also, I have the latest version of the BIOS installed.

  Note: the touch buttons on top (volume, speaker and enable wireless, etc) stopped working a few days after the disappearance of the sound meter, I have fixed that by connecting battery power and disconnectiong for awhile. However, the indicator is still not displayed. Don't know if this is related (I guess not).

  Thank you

  The Volume OSD is a HP MediaSmart Menu function. He has to load at startup. To do this, go to msconfig and make sure that it is enabled under the Startup tab...

  If she is not there, you can download it here... ftp://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48552.exe

• Satellite A300: How to put back the Volume indicator on the screen?

  I have my laptop a few days ago and I've set the volume using the volume knob on the front of the laptop an on screen volume indicator would show.

  I tried to uninstall some software I didn't and probably uninstalled the application that handles this.

  I tried to install Toshiba assist, and added value to Toshiba pack, but it still does not work. I thought that public services has come with this feature.

  I looked and it seems that volumeindicator.exe is used for this, but I can't find that anywhere!

  How can I get this working again?

  Hi guy,

  have you tried reinstalling the driver audio and, subsequently, value added package?

  Would be worthy to try...

  Welcome them

• Hard drive not showing do not full capacity after reinstalling win 7

  I just reinstalled windows 7 and have just noticed that my hard drive I do not show full capacity. After installation, it is show that C & D drives with Windows installed on D. When I tried to copy my music from my backup library he said that there was not enough memory. SRE enough checking properties of the drive see drive capacity C 97.6 GB and D as 12.1 GB drive. The hard drive is supposed to be a terrabyte and it was OK was before I reinstalled Win 7...

  Hi Mick,

  You can expand the C partition in "unallocated space" as follows.

  Once more, hold down the Windows key and press R.  In the run box, type compmgmt.msc , and then press ENTER.  Click disk management in the left pane and let readers load upward.

  In the lower graphic view of the partitions, right-click on the C partition and select "Extend Volume".

  In the next window, click Next.

  In the next window, use the "select the amount of space in MB" make sure it shows the same number as the number of 'Space available Maximum in MB' which is registered just above (adjust if necessary).

  Click Next, then click Finish.

  It may take a few minutes to complete.

  Kind regards

  DP - K

• ConfigFree does not show the intensity of the signal

  ConfigFree works properly - except that the Wifi strength is displayed at the highest level for all sources, regardless of how effective. (as it is deducted from the source location and the signal strength indicated by the utility windows)
  I.e. all access points are on the inner ring.

  I am running Vista on a Portege M400 with Configfree version 7.0.0.24 and Intel 3945abg driver 11.1.0.86. I got the Intel proset utility loaded, but they would not show the signal strength at all. So I unloaded it.

  I tried rolling back the drivers for the driver Wifi and Configfree with no change in behavior.

  Any suggestions at all would be welcome.

  Rod Laird Australia

  Hello Rod

  I use Vista on my Satellite last Vista designed ConfigFree utility, but I never noticed the signal WIFI is displayed there. Can you please explain exactly where this signal must be shown?

  When connected to WIFI, you can see the small symbol in the task bar but this symbol belongs to Vista and the symbol of the strength of the signal is also visible in Vista network and sharing Center.

  Sorry but I do not see this symbol in Configfree directly. When my laptop is connected to WIFI all I see in ConfigFree is connected (blue) status and the connection between PC icon and black (marked as G) WLAN. It is also interesting that the small blue animation moves along that black line.

  All that s!

• Re: Realtek 8191SE card will not show up in Device Manager

  Part number Satllite L450D-128: PSLY5E-01301LEN, Win7 Ultimate 64-bit.

  Hello

  I can't use my wireless internet connection. The connection to the LAN works fine when connected via a cable.
  I have read all related topics to make sure that I'm not repeating a problem already solved, but I can't figure out the problem.

  The connection in the status bar indicator displays no network available.

  The wireless light on the front of the laptop does not illuminate.

  FN + F8 does nothing (even after delivered to zero cards flash with package etc.) 8191SE map does not show in the Device Manager and tried to add manually without success.

  I installed the last card wireless driver specific to the 8191SE yet once but nothing.

  I also removed the card and re-sitting there but still nothing shows in the dev Manager.

  I've also updated my BIOS and made sure the wireless is turned on.

  Any help would be greatly appreciated.

  Thank you!!

  Do the last ultimate test: install original recovery image that you got with the functionality of your laptop and check.
  If the material is OK that should be listed in Device Manager after installing the driver on the right.

• How can I get the TestStand splash screen to not show up when I call the results treatment Utility offline?

  So I call the Offline processing Utility (ORPU) a not executable call results in a plugin to perform a personalised treatment in another configuration.  Everything works fine, including having run reduced (mostly hidden) by using the option/tray.  When he called, the TestStand splash screen appears (certainly is not a show-stopper but it's confusing from the point of view of the user).

  Is it possible that I can get this start screen to not appear when calling the ORPU?  I noticed in the help, mention is made of the use of the callback file, and I wonder if someone has successfully used this to avoid the dialog box or other behaviors.  I would like more info on how it works, but it doesn't seem to be a vast detail on this in the help, and I'm not also find me useful examples.

  The source of the Offline utility treatment results is included with TestStand and can be changed.

  The ORPU source is located under "Components\Models\TestStandModels\Offline utility treatment results"

  From the source, you can see that there is no flag that allows you to hide the splash screen (except for / I leave, but that it will also close the ORPU!); However, you can easily change the ORPU so it does not show the start screen by removing the following lines in \Components\Models\TestStandModels\Offline Results Processing Utility\OfflineResultsProcessingUtility\MainForm.cs

  If (! data.) Quit smoking)
  splashScreenForm = new SplashScreen (mEngine, false);

  Regarding the flags without papers, there are not really many flags undocumented in the ORPU (even once, you can see them in the source), and undocumented flags have very specific use cases (open files from shell and NEITHER internal regression tests).

  A (non-official) complete list of indicators ORPU from 2014 TS:

  /?
  Shows help

  / tray
  Starts the ORPU in the status bar

  / exit-when-done
  Exits when all files are made

  / I'm leaving
  Leave immediately

  /process - files - Missing - Data
  Treats the files even if they lack of data

  / which-process-files-Missing-Data
  Do not process files that are missing data, show only a mistake (it is the default behavior).

  / Process-All-Profiles
  Start all profiles

  / Process-No.-Profiles
  Don't start any profile

  / Process-Profiles
  Treat the profiles specified in the following arguments

  / process-files
  Add the files specified for the specified profile

  / log - level

  Sets the logging level for the newspaper ORPU, all of the messages above, the specified log level is saved.

  /ShellOpen
  It is an internal indicator, it is used to treat applications for the shell (for example, after a double click on a tsr in Windows Explorer). Do not use this indicator.

  / non-interactive
  It is an internal indicator used for the test. Do not use this indicator.

  Please note that NEITHER does not support appellant flags undocumented and that NEITHER is not guaranteeing backward compatibility of these flags undocumented and they could change at any time, without warning.

  For a more detailed explanation of the working of each option, refer to the Arguments of the command line Utility using TestStand treatment results offline.

  Hope this helps,

  Francisco

• Missing volume indicator

  Hello

  I have more green or indicator of intensity of the screen volume indicator. They disappeared after uninstalling the presentation Director. I reinstalled it but no volume or intensity indicators are back. It is a minor inconveniance but I would like to have them back. How can I do this?

  I found a solution!

  It comes to the register which is not too attractive, but it's a simple change so not so intimidating. Would it make sense total, when you look at the value of font size OSD his set with the lowest possible value (00 00 00 00). Not surprising that we cannot read what whatsoever...

  I followed what was offered in the following thread and everything works fine:

  http://Forum.ThinkPads.com/viewtopic.php?f=29&t=72502

  P.S. I would cite to back up before you mess up the registry keys...

• DV7-2185dx usually will not be market - indicator of no. - East power codes

  Hey everybody!

  I have a DV7-2815DX, p/n NV023UA #ABA, and it will not turn on 99% of the time. Here is a description of the problem:

  • Power cord is plugged and the illuminated by the plug.
  • Battery is in, but no charge indicator. SOMETIMES (about 10% of the time) the charging light blinks constantly.
  • I hit the power button and nothing happens. The fans start, no beep codes, no flashing of the LED.
  • Same results when the battery is removed.
  • Same results when the battery is installed and the power supply cord is unplugged.

  Once from time to time, the system tries to start. Fans of start and all lights light up (slider in the volume indicator wifi, etc), but then it turns off after about one second and continues the original problem.

  Here are the steps I've taken so far:

  • Tried the hard reset steps described here: http://support.hp.com/us-en/document/c01443371
  • I swapped the RAM. Tried a stick into the two slots, tried the other stick in both slots, tried both sticks in different locations. I have tried different RAM sticks.
  • I tried another from an another HP Pavilion laptop AC adapter.
  • As already said, I have tried with and without the battery installed.
  • I completely disassembled the laptop down to the motherboard and clean the radiator. I also have the form of basic thermal paste to the processor and GPU. I also did all the connections have been fixed. One was suspicious:

    It is located inside the laptop power cable style: http://www.itpartsource.com/searchquick-submit.sc?keywords=538085-001+. The wires in the connector 2 pins were loose, the connection itself was not a coward but the actual wires inside the connector. I tried to reinstall the best I could, but I am not convinced that I made a difference.

  • I also replaced the CMOS battery. I noticed that the box located below the battery inside the small box in which it is located, what apperaed to be rust stains.

  I could able to start completely twice, once before the dismantling and once after. Whenever he gave me an error 'checksum', on the CMOS, and it gives me the ability to load the default values (F1) or enter the settings (F10) system. I chose a different each time and was able to get to the windows startup and the laptop worked like a charm. After closing down, however, originally continued problem.

  So, what do you think? Is that what cable power (I already ordered a new one, just to be sure)? What is the connection of the CMOS battery? What is the CPU or GPU? Or do I need a new motherboard?

  I also had a supplementary question. Anyone know where I can get a new CPU, if I had to? If I buy a new motherboard, you know if it comes with the Integrated GPU already?

  Thanks for posting my lengthy post! I look forward to your responses!

  Hello @PromisedLand,

  I see that you have a problem with your laptop from consecutively. I will try to help you with this.

  Please provide all the details you have to what has already been tried. It helps a lot in the direction on how to proceed. Of what you have tried, I'm also leaning towards the issue being to the system board.

  * be aware that changing the motherboard yourself can be very difficult to change the id of service without the HP software to do. You can contact the technical support for this part.

  In Service and Maintenance Guide, you can find spare parts and the answers to your question on the system board. Page 79 has the cards of replacement system, page 93, processors. They are not part of the Council, but the graphics are.

  You can check/contact the store part HP to order these parts.

  I hope you're able to help.
  Thanks for posting on the HP Forums.

• You plan repair install XP - Partition but does not show an installation of XP

  running XP Professional on computer dell laptop.  My hard drive is a Seagate Ultra ATA 100 GB.

  After getting a blue screen, I have tried a reboot.

  1. now the message I get is "a disk read error occurred" so I boot from the disc and did the following in the recovery console

  -Chckdsk/r/p gives me the following message "volume appears to contain one or more unrecoverable problems.

  -Fixmbr and fixboot executed successfully

  -Run the Seagate (Seatools) utility to check for problems and he found.

  -Re-booted from the disc and tried to re - install xp over xp of origin (not to lose data).  However, the installation screen does not show a partition with XP installed.  It shows a partition with 100 GB and 100 GB free.  I have the option to install xp on my C drive but I don't have the opportunity to do a "repair installation".

  My question is what happened to my xp installation?  and what are my options for recover my operating system without losing all my data?

  Hi five_betty,

  It seems that the hard drive is damaged. We recommend that you contact Seagate support team diagnose the hard disk and correct any mistakes or to replace.

  Check if you follow the right steps to make the repair install.
  See Method 2: Repair the installation of Windows XP by starting your computer from the Windows XP CD in this article

  Visit our Microsoft answers feedback Forum and let us know what you think.

• my task manager on windows vista family premium does not show the tabs before and used to work properly.

  my task manager on windows vista family premium does not show the tabs it used to, when I used to open the Task Manager it would be things like 'process' 'services' 'preformance' ect. in the tabs. but now when I open it it shows just a window that has two columns, one labeled task, and other labeled status. It shows what im running, but there any options at all as the winger treat ect. the window is not even an exit or minimize the icon as other windows are in the upper right. the only way to close it alt f4 do - what I do? Ive already tried to restart the computer, and I'm on the only account to administer it. I have a screenshot of the new manager of task here: http://i1119.photobucket.com/albums/k621/a_bakedpotato/vistataskmanagerisue.jpg

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  I hope this helps. Good luck.

• Photosmart Premium C309g-m on: scan opion not showing Photosmart Premium C309g-m on mac OSx 10.10.3

  Hello. The scan option does not show the printer.  I reinstalled the printer as well as all updates. I have already scanned and this feature is currently unavailable.  I wonder how to solve this problem.  I am

  using Mac OSX 0.10.3

  Thank you

  Hello

  Restart your Mac, then try to run the software update as follows:

  First of all make sure that the printer is turned on and connected to your Mac or on the same network.

  Click on the Apple icon, then select about this Mac.
  Click software update, and then click the Store from the top of the indicated window menu and click on reload the Page.

  Be sure to install any update HP or Apple, then check for the difference.

  If it persists, try manually install the package below:
  http://support.Apple.com/kb/dl907

  Now you should be able to scan from printer & Scanners or Image Captrue as follows:

  http://www.support.HP.com/us-en/product/HP-Photosmart-premium-all-in-one-printer-series---C3/3984414/model/3793675/document/c04467713/

  You can also install and use the HP easy Scan application below:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Please let me know how it goes,

  Shlomi

• Beats Audio Volume indicator WENT after IDT HD Audio update!

  Just bought the HP Envy 17 t-3000 (Envy 17 model custom) and I updated all drivers through HP Support Manager.

  BEFORE the update, the Beats Audio worked fine...

  1. press on the knob and the popup box appears about 3 seconds

  2 whirlwind indicator volume seems to display the volume level.

  AFTER the update, something changed the Beats Audio... had to re - install the latest driver from the HP Web site (even after the contact with HP Tech support chat and email several times)...

  1. press on the knob and the popup box appears about 10-12 seconds now!

  2 whirlwind indicator volume DISAPPEARED for volume level indicator is GONE

  Of course the sound works but NOW I do NOT know or remember the volume level whenever I listen to music.

  You can barely tell on the speaker icon to Windows on the toolbar since 2 sound waves indicate at least 50% of its level, but that's all!

  I have the software following and checked their settings and put everything to 50% and use the Beats Audio dial to control the volume when the programs are used:

  1 WinAmp

  2 VLC player

  3 MPC

  4 WMP

  No matter what I try, it appears that the Beats Audio Volume Control indicator Swirl is GONE! Worse still, there is NO Windows switch order volume at least don't let the open Volume mixer!

  Someone knows how to solve this problem and bring back the Audio Beats volume indicator?

  HP Tech support insists on doing a re clean - install of the operating system to its original state after suggesting to do reinstall partial of restore points. Already tried restore but points only some since there were MANY because of various updates and none brought the Volume indicator.

  Perform a total OS re - install would be the LAST attempt given I have to reinstall all the programs and updated ONCE again that would be laborious!

  Thank you!

  Hello

  Without knowing exactly which updates HP Support Assistant is installed, try the following first and let me know.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56900.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are done, reboot the laptop and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Then, download and install HP display to the screen from following link.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55152.exe

  Once again, when the installation is complete, restart the laptop.

  What is now working properly and what is not, or is there no change?

  Kind regards

  DP - K

• Show activity indicator when a MediaPlayer is buffering

  Hello

  My problem is I want to show busy indicator when a MediaPlayer is buffering. I use MediaPlayer to play streaming audio and it would be nice to display an indicator of activity.

  I guess I should use the buffering() signal, but have no idea how to do that in QML.  Please notify.

  Any help will be appreciated.

  Thank you!

  Thanks Zmey!

  I did as follows.

  By clicking on the 'play' button I call

  indicator.start();
  

  as for the indicator

  onStarted:
  {
      nowPlaying.acquire()
  }
  

  where nowPlaying is NowPlayingConnection

  and in MediaPlayer

          onBufferStatusChanged:
          {
              if (mplayer.bufferStatus == 2) // 2 means that the media is playing
                  indicator.stop()
          }
  

  I also added indicator.stop () in onRevoked in the NowPlayingConnection.

  Of course, the easiest was to do something like this

          onBufferStatusChanged:
          {
              if (mplayer.bufferStatus == 2) // 2 means that the media is playing
                  indicator.stop()            else                indicator.start()
          }
  

  but it does not work in my case.

  Thank you all.

• BlackBerry smartphones my 8900 will not show his load

  Hey everybody,

  Recently, some time when I plug my phone into the wall charger or the USB cord to charge it, the phone does not display its loading. First of all, I thought it was the outlet, I'd but has no importance. I would reboot the phone turn it works market and nothing. My phone is new barely obtained early May and I leave the charger in a place I don't move it so its strange for the phone to do this. Any ideas as to why or how I can fix it?

  Bifocals wrote:

  Hello

  Well, let us know after load you completely on the USB key if you still have a problem of light on the charger.

  Thank you

  Bifocals

  OK so he got full recharged on the USB port and later the same day with the charger but I can't tell that you solved it cause like I said after a while, he finally shows his load and this is what he does sometimes. So I don't really know what's causing the indicator to not show his support sometimes... If this happens again, I'll call it T-Mobile. Thanks anyway!