Y480: cannot install OneKey Recovery

Similar Questions

• Windows Vista Service Pack 1 will not install. -It says "cannot install, change recovery."

  I recently installed windows Vista Home Basic on a hard nine. I want to install sp1, but after long hours of reboot and installation, step 3 of 3, it says "cannot install, restoration of the changes." subsequently, an error message appears indicating that an .exe file (it started with MNT) is corrupted. I was able to remedy this through the command prompt (chkdsk) but I want to know how to install sp1. I ran an sfc scan result were he finds files corrupt, but he couldn't fix it. I then ran the option upgrade from vista startup disk and sfc shows that there are corrupted files. The newspaper did not show all corrupted files sfc was not able to solve. I ran sp1 install from both standalone and windows update. I chose the option the first time and the second time, I shut down the computer and booted from safe mode.

  Thank you for your time and your help.

  Hey Joe,

  You install Windows Vista SP1 by using the stand-alone package or by using Windows Update?

  I suggest you try the steps from the following link:

  Note: It is strongly recommended that you back up all your personal files. For more information about how to back up your files, please visit: http://windows.microsoft.com/en-US/windows7/Back-up-your-files

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• Re: Satellite L300-10 q - cannot install the recovery disk with XP SP2

  Hello

  My laptop started giving problems (slow start & suspended inbetween) so I tried to re-installation with installation disk but recovery whaile there ask lang. & confirmation of removal of data and after the installation of minutes collapsed & turn in DOS (X :) for admin.

  When I restarted labtop it shows Bootmgr has failed.

  So I contact customer Service & they replaced the HARD drive with new, but still the same problem.

  I even tried to install XP SP2 after copying the files, it displays HARD drive not found.

  Pls help

  L300 - 10 q series

  Pls advice also how to check Windows XP is 32 or 64 bit?

  Thanks again

  Alvares

  If you try to install your laptop computer with the Microsoft installation disc, you need the SATA drivers. You can find it on the Toshiba site.
  You must load the drivers of an external floppy drive or you integrate into a new CD with nLite (www.nliteos.com).

  For the recovery disc you n t need these drivers because they are already on the disk.
  If you get the same problem with the recovery disk, you should check your disk with Drive Fitness Test (Google is your friend).

• G560 cannot start Windows 7 after onekey recovery

  I got the Lenovo G 560 0679 (2.54 Ghz, 4 GB Ram, DVD, Win 7 64 bit) * do not know the full product code * and created recovery disks. During the process, the system wanted 3 disks. After the second disc, the recovery disks have already been created. It was a little suspect. I tried the recovery disks. Then I have to restart the system. If I start it says that windows could not be started due to a change in hardware or software.

  I will go into an installation disc that has not been included in the box.

  Well below I got the offer to choose between

  Start windows normally

  use the last working configuration

  saving mode

  Save the network mode

  Save the mode prompt

  I also tried to install a Win 7 Home 64 bit edition on the main partition. Subsequently, I installed onekey recovery and tried to restore with the partition of lenovo. It did not work either.

  Can someone help me?

  Thanks for you advice.

  did you already changes on the software?
  Remove if inserted usb devices all.

  any other error instead of "change in hardware or software?
  I don't know if it will help but try to set the bios default settings (when you see the lenovo logo, press f2)

• Cannot install Lenovo Onekey Recovery

  I just downloaded the Onekey Recovery for 530 Y, but I can't seem to install it. I accidentally uninstalled the previous, and now I can't get it back. When I tried to install it, I get an error sayinig "this software can only be installed on a Lenovo system", but I use a Lenovo system.

  Extract the files from the EXE with Universal Extractor. Go to the directory where the files were extracted and delete a file called "Custom". You should be able to install it then.

• Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  The Recovery Manager starts well. He correctly completed the following steps:
  1 format HDD

  2. copy the files from the CD to the drive. It copies all the 3 CD.

  Then he ask the driver (the 4th CD) CD. Once I have this CD, then after awhile I get messge below:

  Contact HP support

  In most cases, recover the hard disk will solve your problems.

  If your problem persists, you may have to contact HP support. Find details of support HO in the documentation of your PC.

  After that I see above meaage the only button I can click is "Finish". Once I click on finish, then in a minute, I get a message that "recovery completed successfully.

  The laptop restarts and displays the message on the screen "Bootmger" not found

  I called HP support and asked to run the hard drive and memory test and he succeeded.

  I can install windows on another CD I have with.

  But I can't install WIndows using the recovery CD, I received from HP. It's the 2nd CD series that I received these don't work or the other.

  I have two identical laptops. Tried installing on both and having the same problem on both.

  Can you please help with this.
  HP sends fake CDs?

  Kind regards

  Hello

  Here is another solution, you can try to see if you can get Windows 7 to install correctly.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• I can't install lenovo onekey recovery on my windows 7 64 bit system. The download is designed for 64-bit systems, but it keeps telling me to install it on a system of ILO 3w2.

  The Lenovo onekey recovery was accidentally removed from my laptop G570 - which uses a 64-bit Windows 7 system. The Lenovo support section gives two options for restoring onekey to my machine: a 32-bit or a 64-bit.  I choose the 64-bit download and download the driver.  However, it will not be installed and the message comes back on: "this must be installed on a 32-bit program.

  There is no doubt that I do the right choice of a 64-bit download for a 64 bit system.  What can go wrong?
  Thank you in advance.
  L.Affley

  Since it is a specialized Lenovo software, you would probably need to speak directly with support from Lenovo.

  It is not uncommon that the download link points to the wrong queue (s).

• cannot install downloads/impossible restore/recovery

  cannot install downloads/impossible restoration/recovery running IE9/windows 7 have dell inspiron 560 need help / * address email is removed from the privacy *

  Hi Poohwho,

  1. downloads are you trying to install?
  2. what you trying to restore/recovery?
  3. What is the accurate and complete error message when you try to install the downloads/restore/recovery?
  4. don't you make changes to the computer before the show?

  Method 1
  I suggest you try the steps from the following link for issues related to installation.

  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651#reso3

  Method 2
  For problems with the restoration, I suggest you to see the following link:

  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Cannot access UEFI on u410, rather onekey recovery option appears

  I recently reset my laptop to factory default using the reset Windows 8 option, and now when I want to access the UEFI settings I get a prompt onekey recovery instead. Is it possible to get around because I just transferred my files and I don't want to reset everything again. I tried searching the Internet for a solution or explanation, but I have not found.

  Hello, thanks for posting!

  I turned off my laptop for a bit, and then you press the NOVO button. There was an option in the BIOS Setup, but when I chose it the normal login screen appears. I tried to go to UEFI, but the same thing happens where appears the OneKey recovery fast. I turned off the computer again and using the NOVO button I chose Menu start or something similar, and I get the OKR again. I don't know if it's supposed to happen, but before I did a factory reset I could access to UEFI.

  EDIT: So I googled some more info on how the NOVO button does not work as expected and I found this post:

  http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-Z-and-P-series/lastest-BIOS-to-Flash-for-Lenovo-U410-I-can...

  I've updated the BIOS using this link and I can access now! I guess I wasn't looking in the right places for the solution, but that the update is obscure and I really wonder why it is not available on the official website.

• Cannot install iOS 10.0.1 with Apple Configurator 1.7.2

  Hello

  I have 60 iPads in 5 carts (12 per basket) that I need to install some applications on. They are already configured and supervised with Apple Configurator 1.7.2. I've never had problems in the past with AC1, I've always been able to install the updates and applications easily with very few questions, because of that I've never felt the need to update to AC2. However, this time during the update of ios and refreshment, I get the error 'complete with an error - cannot install iOS' 10.0.1 And now 12 of my iPads are stuck in recovery mode.

  I tried before wipe them off and re supervise them, but I always get the cannot install iOS 10.0.1 error, followed by all the iPads stuck in restore mode. I tried to update only 1 or 2 at a time. I tried the update/supervise them with no apps queued for installation. I tried to restore the iPad via iTunes, which works, but when I try to put it back on AC1, I still get the same error mode and recovery.

  I tried searching online for compatibility with the new iOS and AC 1 problems but found nothing.

  I would like to know if there is more information I should provide that might help.

  Thank you for your time.

  Ben

  Hi Ben

  Makes your iPad successfully update to IOS 10, we have approximately 400 ipads, I've updated a single ipad at 10 IOS using our MacBook pro AC1 OSX El Capitan to test, ill try another now and see if its success.

  When you connect an ipad update the Configurator re-download the IOS 10 or use a cached copy?

  How your Configurator is connected to the internet (behind Proxy, Wifi, Ethernet), perhaps the downloaded IPSW file is corrupted and need to be redownloaded removed\.

  Kind regards

  Rick

• Cannot install OS: "this identifier Apple has not yet been used.

  I just got my first Mac yesterday, a mid 2010 Macbook of opportunity. It's in great shape, works great, I was briefly very satisfied with my purchase. Then I tried to reformat/reinstall, as it does whenever purchasing a computer used.

  I followed the instructions here: https://support.apple.com/en-us/HT204904 and when I got to the step three, after the failure of the hard drive, it wouldn't let me install the operating system. He wanted to connect first with my Apple ID, so I did an Apple ID, but now it keeps giving me an error "this identifier Apple has not yet been used in the App store" and then it gives me the opportunity to cancel or "review". Click Cancel simply cancels the installation, just by clicking on review also cancels the installation.

  An ID is not necessary, but there is no way I can see to avoid it say the instructions on this page. It was suggested that maybe I could avoid the connection on the way to recovery, rather than recovery of the Internet, but the Cmd + R and Cmd + Option + R give recovery of the Internet. I don't see any way to get to the regular recovery.

  I had a suggestion to install from the disc, but I have not all discs. If I could download it from somewhere and burn them then that would be nice, but the instructions on this page are pretty clearly that it should not be necessary to use disks. I should be able to do without signing in.

  So... what upward with who? Where should I go from here? Is it possible to do a regular recovery? Or bypass the Apple ID thing?

  < published by host >

  "a mid 2010 Macbook opportunity."

  "Cannot install OS:" this identifier Apple has not yet been used.

  It's the property > change owner of a Mac of opportunity

• Satellite A300D-17Z - cannot install the display driver for Vista

  Hello

  There is a big problem with my A300D-17Z.

  The laptop has ATI HD3470 Hybrid Crossfire display system. I'm trying to install the driver in Vista Ultimate, but it does not work. The ATI Catalyst control cannot install and ATI driver file is empty. Shows Device Manager still there are two graphics card with «!» I tried so many ways. Install framework 3.5, pilot of the AMD 7 series, last version of the ATI driver, driver of the same other computer brand who says that worked.

  Please help me, I had been tormented for nearly 48 hours. PLEASE, I BEG YOU!

  Hello!

  Have you tried to install the driver to display on the Toshiba site? You can find it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before you try to install a new display driver, you must remove any old version in Add/Remove programs. Then, restart the laptop and use CCleaner to clean the system. Restart again and then install the new version.

  You have the same problem with the factory settings? In the worst case, you must reinstall Windows using Toshiba recovery disc.

  Good bye

• Cannot install any os in a hp pavilion dv5 - 1120ev

  Hi, my friend has an hp pavilion dv5 - 1120ev, he had top, pre installed windows vista. He asked me that if I could make the computer faster, so I told him, of course, you need to change OS to do this, you must install windows 7, I said. So I took with me, put windows 7 dvd, boot from the cd/dvd drive, deleted all partitions, even the recovery partition (I didn't know it came without a copy of disk recovery tools), partitioned the drive into 2 two new partitions, formatted and continued to install the os on the primary. The dvd that I used has all versions of windows 7, 32 and 64 bit, tried all, it gets stuck on the process of expansion, to 0% files (only with one version, she was 14%, I can't remember which), and it gives me the "windows cannot install required files. the file may be corrupted or missing. "Sure... error code: 0 x 80070017. Then, I tried with another dvd with winodws 7 ultimate, same thing. I also tried with the disc do not split into two, one partition, just in case windows is having problems expanding all of the files, just in case, same thing. Then I thought it was a bios thing, he had to be updated, which to be honest there cause of the version it is F.0C, and in the support section of the hp site, I found a newer version of it, which is also described as necessary for the latest operating system upgrade. I thought wow, that's it, I found it, I will upload a version of it bootable, version bootable cd to be precise, cause the bios version there back does not support booting from usb devices, I'll update it and install the operating system. NOPE. The site has an exe of the bios version. I tried to make a disk bootable with the bios in there (with the option of nero boot disc), I guess that I've not done it right, it could be a solution, but I could use some help on this. I also tried to install windows xp, so that I can install it the update of the bios, the same thing, I get the same error, only with the old blue sceen scholl. Finally, I tried to install windows vista Home premium, just in case the bios for a reason any has only accepted this operating system, no way, same error again! So now I'm not stuck wth no operating system, a pc unusable, nothing can be installed on it. I asked my friend that if the cd/dvd drive had some kind of problem, he said, had no problem with game discs, their loading and installation of games. Please HELP I don't know what to do! Thank you

  Nevermind, I managed to solve the problem by taking the hard drive, put it in another phone and the windows installation, then put it back. It worked like charm, so the problem is 100% on the DVD player.

  Thank you

• Qosmio F30-140 - cannot install the driver display and Bluetooth

  Hi all!

  I have a little problem with the installation of recovery.

  After installing Windows I don't have the graphic card installed and is not everything, I can't turn on bluetooth because the computer cannot install it. New form of drivers Toshiba do not change it's the same thing. If I install the graphics card, the info is this graphics card was not found. Bluetooth installation always hangs in the middle. All the original drivers are on the disk, but I can not install them. All I get is a "controller VGA with one?" in Device Manager.

  Help, please!

  Hello

  Normally, everything must be installed correctly after using the Toshiba Recovery disk but before trying to update a driver, you must remove the old driver first. So, go to Control Panel-Add/Remove programs online and remove the old driver and reboot the laptop. You can then install the latest driver on the Toshiba site.

  In the worst case, there is something wrong with the motherboard and you must go to an authorized service provider, but first try the new drivers.

  Good bye

• You cannot install and uninstall applications

  Hi since last week when I opened to play music, it shows error "play music has stopped working" so I disabled the app and installed third-party music app... from these days I m not even able to install the apk file or cannot install the playstore apps... When I try to uninstall any application the phone will roboot 1 reboot it struck the motorcycle boot logo so I try again to restart and this time phone begins to optimize all the 135 apps that take about 15 to 20 minutes... this thing happens every time when I try to install the app on play store or try to uninstall the game store...

  When I try to install apk crushing the screen and when I try to play any video gallary or open any contact to call the crash of the screen...

  and I am also facing google game stopped service error...

  I do not understand why I am facing these problems...

  ago that I tried to start in safe mode but still mode my phone struck boot logo, tried several times to start but use...

  I also tried to erase the cache but no use and also tried factory reset of the bootloader but no use...

  and finally decided to blink cm13 and twrp recovery... and now my phone works perfectly...