G560 cannot start Windows 7 after onekey recovery

I got the Lenovo G 560 0679 (2.54 Ghz, 4 GB Ram, DVD, Win 7 64 bit) * do not know the full product code * and created recovery disks. During the process, the system wanted 3 disks. After the second disc, the recovery disks have already been created. It was a little suspect. I tried the recovery disks. Then I have to restart the system. If I start it says that windows could not be started due to a change in hardware or software.

I will go into an installation disc that has not been included in the box.

Well below I got the offer to choose between

Start windows normally

use the last working configuration

saving mode

Save the network mode

Save the mode prompt

I also tried to install a Win 7 Home 64 bit edition on the main partition. Subsequently, I installed onekey recovery and tried to restore with the partition of lenovo. It did not work either.

Can someone help me?

Thanks for you advice.

did you already changes on the software?
Remove if inserted usb devices all.

any other error instead of "change in hardware or software?
I don't know if it will help but try to set the bios default settings (when you see the lenovo logo, press f2)

Tags: Lenovo Notebooks

Similar Questions

  • Compaq Presario SR5130NX: Cannot start Windows Vista after failure - HELP!

    Hello! My building has undergone a complete failure so 4 days ago I used it. Power resumed 3 hours later, but I was not able to log on since.





    Normally, I turn on my PC, and about 30 seconds later, a window pops up asking you my password. After entering it, the PC come by my office. Now, when I turn on the PC, it brings me to a blue screen with a mouse cursor in the Center (which I can move), but there is nothing to click on.





    When I press F8 during the boot process and choose an option from the window "Advanced Boot Options", I still can't start my computer normally.





    Here's the "Advanced Boot Options" I tried, after consultation with my brother a little more PC-savvy:





    1 repair your computer - after I see my black screen that is usual with the words "Microsoft Corporation" under the green bars that scroll from left to right for about 15 seconds, a blue screen appears with the mouse pointer in the Center (which I can move), but there is nothing to click on.





    2 mode safe - while the PC display several files on start up and down, it stops on "Loaded: \windows\system32\drivers\disk.sys" for about 20 seconds, then proceeds to a black screen with the words "Safe Mode" in the 4 corners and the mouse cursor at the Center (which I can move), but there is nothing to click on.





    3 safe mode with network - see "Safe Mode" above.





    4 safe mode with command prompt - see 'Safe Mode' above.





    5 last known good Configuration (Advanced) - see "repair your computer" above.





    6 start Windows normally - see "Repair your computer" above.





    7 debug mode - see "Repair your computer" above.





    I downloaded a DVD recovery based on Linux in knopper.net, allowing me to access important files, which I copied from the desktop to an external hard drive (4.1 GB iso file).





    PC Windows XP of my brother has a recovery disk, but my Windows Vista PC did not come with one. I've seen a few paid versions, but looked resources due to cool weather and free shipping.





    I can't tell if I have the 23-bit or the 64 bit version of Windows Vista, so I downloaded both versions of an open source sourceforge.NET startup repair, which I burned on 2 DVDs. After you run the startup repair program using two DVD, the diagnostic results have been uploaded online at ubuntu.com for review and technical analysis. Here are the links:





    http://Paste.Ubuntu.com/16018001/

    http://Paste.Ubuntu.com/16019372/

    http://Paste.Ubuntu.com/16040380/





    The last report ended with the words "start managed to fix...".  You can now restart your computer. "But I always encounter a blank screen (black or blue) when I try to log on to my PC.





    Here are my details of PC, if it is useful:





    Desktop Compaq Presario SR5130NX

    Serial number: [personal information]

    Product number: GC667AA

    Warranty end date: October 5, 2013 (according to Compaq/HP.com)



    http://support.HP.com/us-en/product/Compaq-Presario-SR5100-desktop-PC-series/3436764





    Thanks for any help you can provide.

    Hello

    Since you already have KNOPPIX I try Gparted and use it to 'clean up' the score because it will stop in an impure State.

    NTFS

    [1][11]NTFS-3 g / important

    GParted will try.

    Also, I would consider the old problem with fat systems, floppy disks etc. which sometimes a copy of sys files from a floppy disk to a hard drive has reactivated a bootable system.

    So, if system files have been damaged, then replace them since a Setup disk.  Because he goes to options, what kind of work.

    https://en.Wikipedia.org/wiki/Windows_Vista_startup_process

    • Windows Boot Manager (Bootmgr.exe)

    • Windows operating system loader (Winload.exe)

    • Recovery of Windows loader (Winresume.exe)

  • Cannot start Windows 7 after the update of the system

    I don't speak of Windows 7 RTM, I know is RC forum but I downloaded the RC of microsoft's official website and I can't install it, it reached the "end of installation"(ou quelque chose comme ça) phase and blue screen of death appears, saying "memory dump" and other things. ". That's why I downloaded RTM from a torrent site, I installed it, everything was fine, the aero was not on so I that I should update the video drivers and then I downloaded all the updates possible (via the control panel), then I restarted the pc and now I am not able to load windows , it's blue screen of death! Notice that I can run windows 7 mode safe mode, but when I try to start it in normal mode the blue screen appears. BTW, I have windows xp installed on my pc as well. So, here is my setup:

    AMD 7750 dual-core 2, 7GHz
    4 GB of RAM, 800 Mhz, but the system says 3.25 alone can be used
    ATI 4730 512 MB, btw I have integrated graphics card (ati hd3200, I think), don't know if it's important but...

    Here is the information about the error:

    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.1.7600.2.0.0.256.1
    Locale ID: 1026

    More information about the problem:
    BCCode: 116
    BCP1: 871F13D8
    BCP2: 90C204B4
    BCP3: 00000000
    BCP4: 00000002
    OS version: 6_1_7600
    Service Pack: 0_0
    Product: 256_1

    Files helping to describe the problem:
    F:\Windows\Minidump\080809-15375-01.dmp
    F:\Users\blah\AppData\Local\Temp\WER-22953-0.SysData.XML

    Read our privacy statement online:
      http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

    If the online privacy statement is not available, please read our offline privacy statement:
    F:\Windows\system32\en-US\erofflps.txt

    Here's the crash dump:

    Debug version of Microsoft Windows (R) 6.11.0001.404 X 86
    Copyright (c) Microsoft Corporation. All rights reserved.

    Loading dump file [F:\Windows\Minidump\080809-14921-01.dmp]
    The mini kernel dump file: only registers and the trace of the stack are available

    Symbol search path is: * invalid *.
    ****************************************************************************
    * Loading of the symbol may be unreliable without a symbol search path.           *
    * Use .symfix to get the debugger to choose a symbol path.                   *
    * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
    ****************************************************************************
    Executable search path is:
    *********************************************************************
    * Symbols cannot be loaded because the path is not initialized. *
    *                                                                   *
    * The symbol path can be defined: *.
    * using the _NT_SYMBOL_PATH environment variable.                 *
    * with the help of the there when you start the debugger argument. *.
    * using the .sympath and .sympath + *.
    *********************************************************************
    Cannot load the image \SystemRoot\system32\ntkrnlpa.exe, 0n2 error Win32
    WARNING: Unable to verify timestamp for ntkrnlpa.exe
    ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
    Windows 7 Kernel Version 7600 MP (2 processors) free x 86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS
    By: 7600.16385.x86fre.win7_rtm.090713 - 1255
    Computer name:
    Core = 0 x 82803000 PsLoadedModuleList = 0x8294b810
    The debugging session: 11:50:54.734 Saturday, August 8, 2009 (GMT + 3)
    System Uptime: 0 days 0:00:19.343
    *********************************************************************
    * Symbols cannot be loaded because the path is not initialized. *
    *                                                                   *
    * The symbol path can be defined: *.

    * using the _NT_SYMBOL_PATH environment variable.                 *
    * with the help of the there when you start the debugger argument. *.
    * using the .sympath and .sympath + *.
    *********************************************************************
    Cannot load the image \SystemRoot\system32\ntkrnlpa.exe, 0n2 error Win32
    WARNING: Unable to verify timestamp for ntkrnlpa.exe
    ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
    Loading the kernel symbols
    ...............................................................
    ................................................................
    ..........
    Loading user symbols
    Loading unloaded module list
    .....

    Pirated Windows 7 allows malware, botnet zero-day ZDNet.com.url

    Messages rating helps other users

    Mark L. Ferguson MS - MVP

  • Cannot start Windows 7 after installing windows XP

    Original title: unable to load an earlier version of windows.

    I have been using windows 7 on my computer. Now, I installed windows XP but the problem is that windows 7 has been hiding and windows XP will load automatically. I mean that my PC does not give me the option to choose the two windows to use. I have not formatted the windows partition 7. There are, but hide. Please help me.

    Thank you.

    Hello

    Read the following article that may help you resolve this problem. This article is true for Windows 7 and Windows Vista.

    Windows Vista no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

    http://support.Microsoft.com/kb/933179

    For more information: Dual Boot between Windows XP and Windows 7

  • Cannot start Windows Vista after you download updates

    Original title: the last time I got a windows vista download it did.not end now if I turn off my computer it won, t wiyhout restart using a rescue disk also can, t open all files except when I connect

    Last time I had a windows down load it didn, t finished and my computer locked up had to use a rescue disk to start

    Hiartco1993,

    1. do you know what download you tried?

    2. do you receive error messages or error codes?

    3 have you tried booting in safe mode?

    You can first try to start in safe mode and try a system restore and check if it helps.

    Step 1:

    You can try to start in safe mode.

    Check out the link for more information on starting your computer in SafeMode below:

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 2:

    You can try restoring the system to safe mode.

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    You can consult the links for:

    System restore

    http://Windows.Microsoft.com/en-us/Windows-Vista/What-is-System-Restore

    System Restore: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Cannot start Windows 7 after the conversion of the physical machine

    Hello

    I converted my windows 7 64 bit running physical machine to the virtual machine using converter 5.0. I am running VMWare Workstation 8.0. My physical machine hid the 100 MB boot partition and 90 GB main partition. During the conversion, I don't have an option to select a hidden partition, nor did I want in my virtual machine. Conversion failed with the following message (planned):

    Unable to find the system volume, reconfiguration is not possible.

    Then, I started the virtual machine using the Windows DVD and selected the option "repair". Once I arrived, I used diskpart to make my active primary partition and then followed the steps in this KB http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1037507 to fix everything including BCD. Once this was done, I used converted to reconfigure the virtual computer, and this time he succeeded. Everything was good and as expected up to that point. Now, when I start the VM, I get by BIOS init and then I get a black screen - no messages at all and he vm it is here without doing anything. I tried to fix it again and everything seems good (checked all the information using diskpart, bootrec and bcdedit so that automated repair) - everything seems to be in order, but the black screen is all I see when I try to start.

    Any help to guide me to this point is very popular figure.

    Thank you

    Andrey

    Disk2vhd create a vhd file
    Starwinds V2V converter converts the virtual hard disk into a vmdk
    This vmdk is assigned to a new virtual machine
    first boot the virtual machine goes into a Windows 7 drivers restore CD you patch

    my notes:http://sanbarrow.com/p2v2008r2.html

  • Cannot start windows more after Microsoft Update

    I have XP.  Once Microsoft installed a auto update July 16, I could no longer open Windows normally.  What did do? That's happened?  How can I return to my computer if can't open?  It seems that the computer doesn't send any signal to the video monitor so I can't enter all orders. Finally, I learned that I can open in Mode safe mode but not in normal mode... But I need a normal mode to access everything.

    Of "automatic update" are what kind you referring?  As you have acknowledged, XP should not be getting updates.  I also asked if you have an installation disc, and you did not.

  • Get error 0x800106ba and cannot start Windows Defender

    Cannot start windows defender after installing Miicrosoft Security Essentials

    MSE disables Windows Defender from Vista:

    Microsoft Security Essentials has its own integrated version of the defender and it automatically disables the version of Vista in Windows Defender.

    If it's not:

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

    Turn Windows Defender on or off the information on the link above of Microsoft.

    Hope the foregoing explains the compatibility issues with Windows Defender and MSE.

    See you soon.

    Mick Murphy - Microsoft partner

  • Cannot start windows after update

    After you install a windows update, my computer cannot start windows, when I boot it.  It seems the windows files.  I don't have a recovery disk (lesson).  I have windows vista, is there anyway to restore windows on my PC other than buying the software.  I confess that I do not download updates often... that is why... It's always trouble.

    Hi, MooreTM,

    Brand and model of your computer, please.  Thank you.

    (1) you are able to start safe mode and do a system restore?

    Start the computer

    Start typing F8

    Select Mode safe mode with networking

    What a load Safe Mode, start > all programs > Accessories > system tools > SafeMode

    Select a date and time before the Windows update that caused the problem

    (2) start Windows and tapping F11 key

    If the Advanced Options screen, select fix my computer

    Press enter

    I suggest the site of the manufacturer of the computer and purchase a reinstallation DVD software.  Cost is minimal ($16.-$20.)

  • Cannot start Windows RT and Reset failed (ASUS Vivotab RT)

    Hello

    I have an ASUS Vivotab RT, which cannot start Windows.

    AutoCorrect has failed, Windows/System32/LogFiles/Srt/SrtTrail.txt said each test pass, and root cause is "cannot determine the cause of the problem.

    I tried Refresh/Reset to solve problems, but they all said there is a problem and will not go forward.

    I have download a boot recovery zip someone share online (contains / Boot /sources etc., install included.) WIM), format a Fat32 drive and extract all the files, it starts (power + volume down), but after selecting the language-> troubleshooting-> reset/refresh, it's always "there is a problem".

    In addition:

    I tried bootrec /RebuildBcd, it shows the 0 found instillation. (Although my C: / he windows of course folder).

    I assigned letter of recovery in the form R, run chkdsk/f r: chkdsk C: F, no problems found.

    DiskPart:

    Volume 0 - Windows 25G

    Volume 1-300M

    Volume 2 - system-100 M

    Volume 3 - 4096M recovery Image

    ASUS support site does not help much, and it is out of warranty.

    Thank you.

    Hello

    Since Windows RT came pre-installed and require installation media to retrieve the device, you may need to contact Asus support for assistance. Please visit the link below to contact ASUS support.

    http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

    Since you mentioned that you can view help her out screen in your ASUS RT enrich your life, you can try the steps mentioned in the link of ASUS support below and try to reset the factory setting tab.

    http://www.ASUS.com/support/knowledge-detail/28/5/ASUS_VivoTab_RT/312D2BB3-C6EC-40F0-AFE8-90F6A0622386/

    Note: once the RESET has been performed, all data, applications, settings and personal information will be deleted after initialization.

    I'm really sorry not to be useful in this regard.

    Please do not hesitate to contact us for any further assistance on Windows.

  • Satellite A660-158 - cannot start Windows

    Toshiba Satellite A660-158

    I bought a laptop Toshiba Satellite A660-158. It has served me less than a week. I think it's the broken hard drive.

    My problem:
    Once I start the computer, it started and has worked for a while, but suddenly, there was an error reading that I didn't have the time. Computer has been restarted. And does not load... Until the boot mode does not reach. But the initial test (with logo) succeeded. Takes a long time and finally gives an error:
    -----
    Cannot start Windows. Maybe it was because of the recent small difference is the hardware or software configuration. To fix this error:
    1. Insert your Windows installation disc, restart the computer (the complete transmission wasn't)
    2. choose the language settings, and then click Next.
    3. Select "repair your computer".
    If this disk is missing, contact your system administrator or computer manufacturer (he turned and said to wear to the DEPOT, but I do not have this feature).

    Status: 0xc000000e

    Details: Unable to start menu, since the required device is inaccessible.
    -----
    Please help me! Idon't know what make me)
    Please write to E-Mail: [email protected]

    Post edited by: HunterS7777777

    Hey,.

    And why do you think the hard drive is faulty?
    Have you ever tried the repair your computer option? Usually with this option you can restore factory in a few minutes.

    Also if you have the Toshiba recovery disc you can also restore the factory of this disc. Just boot from it and follow the instructions on the screen. You need to do a few clicks only, installation with all the drivers and tools happen automatically.

    If you have any other questions, please let us know! :)

  • Satellite L40 - cannot start Windows

    Hello

    hope you can help, my computer Toshibal L40 laptop on commissioning began by displaying the following error message:

    * "Cannot start Windows. a recent change in the software hardware might be causing... » *

    It offers the possibility of:
    "* Launch Startup Repair option" * "

    I chose this. WIndows seems to load up, but then I get the following error message:

    Installed program cannot start. Click OK to turn off the computer *.

    I lost the recovery disk, but attempted to load the recovery console by using a windows XP disk, but it gave me error message more. Advice would be very welcome.

    For the installation of Vista you don't need SATA driver but for Windows XP Home edition you need. Is no problem at all.

    The question is what you want to do now? If you want to use Vista just use recovery media and you will have factory again.
    No problem at all.

  • Satellite L300-19F starts not-cannot start Windows

    My mobile no dΘmarre, "cannot start Windows. "To solve the problem: restart with the recovery CD.

    I can do that, but first of all, I don't want to try to save the data (and photos) from a hard disk.
    Is it possible, for example, go to BACK when booting with the recovery CD, and copy the data on USB?

    Furthermore, all my data on E:\ partition. Will be crushed it during the installation of recovery?

    Please notify. Kind regards.

    > Is it possible, for example, go to BACK when booting with the recovery CD, and copy the data on USB?
    No, it is not possible!
    If you should start up using recovery disc then the recovery process would be started and the whole HARD disk may be formatted!

    You can try to start by using a WinPE
    http://www.LiveCD.com/

    This allows you to start the device and access the data on the HARD drive

    You could also build own Windows live CD
    Check this box:
    http://www.MakeUseOf.com/tag/how-to-create-your-own-custom-Windows-Live-CD/

  • Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

    I have a few problems on my laptop [Acer 3810 t]

    -The first problem
    My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

    -The second problem
    because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

    -The third problem
    So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

    What is the error code that you got with blue screen?

    I think that there is a problem with your drive HARD check that by contacting acer...

  • Cannot start Windows and "Begin repair of launch" or "Start Windows normally" did not work.

    Original title: need help URGENT

    The normal Windows Vista (Home Premium 32 Bit) updated on my DELL INSPIRON laptop... Cannot start Windows

    'Launch Startup Repair' or 'Start Windows normally' did not work.
    What to do next without deleting my data? Thank you.

    Hello

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

    Data recovery, if required

    1. remove the hard drive and it slave in another computer

    2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

    3. try Knoppix

    http://www.Knopper.NET/Knoppix/index-en.html

    BUT this method depends on your hardware in the computer that failed

Maybe you are looking for

  • Origin of the Firefox logo

    Hello, I'm a fan of Firefox, and it is not a problem as such, so apologies if I lose all the time! I'm a designer, so I couldn't help but notice the similarity between the logo of Firefox and the moon. I ran over a picture of the Moon horizontally an

  • wake random

    wake is random. click of a mouse, l ' screen then p is s "is waiting 10 sec reclic and it's good

  • Question Z10 blackBerry OS 10.2.1.2941

    Hi guys, last week I received auto notification update software for 10.2.1.2941, I did it via wifi. Since then now, I am faced with a series of question, my mobile battery will not be charged more than 70% BBM, which is app application and the messag

  • ASMCMD Free_MB & free Tablespace MB are different?

    Hello Experts-I am trying to understand how much free space I have left on the data plan.ASMCMD > lsdg-> gives a MB free different value compared to the use of space tablesapce.Should what value be addressed?I want to ASMCMD will be more accurate but

  • Graphics card to enable the Mercury playback engine

    I work with first as part of the CS5 for a few years with good results but wants to speed up the Assembly.I tried to add my card to the list within Adobe programming to enable the mercury playback speed but no go.My card is ATI Radeon HD 5400.Y at -