Y560 pilot State failure BSOD
Hello
Today, I went down my bios y560 from 59 to older bios bios.bak (by default). I did it because 59 bios is intensive heat and has problems with gradients. After flashing the bios my laptop has no downtime. I unplugged the power supply, but it continues to run on battery. I can't use the off button. Now a BSOD appeared saying DRIVER_POWER_STATE_FAILURE...
What should I do?
replacement ram sticks sometimes helps.
my bad.
It seems that your motherboard is dead. Contact lenovo helpline and request replacement free of charge if you have the warranty.
for Slovakia call: 800-606-040
Tags: Lenovo Notebooks
Similar Questions
-
Hi all
I get BSOD intermittently showing driver power state failure in all cases that I see. I have a HP tx2000z, 2 GB, running Vista Ultimate. I know of minidumps, but don't know how to look at them, or seen what I'm looking for. Tried to do it in Windbg, but as I recall he said that I didn't leave after flashing a command prompt window very quickly. Also tried to roll back as soon as possible, no luck. No new installs of hardware. May began after update to the last large windows. It's something that I can probably fix it, or I'd be wise just to buy a new computer at low prices? Y there is it possible just to install a windows 7 can actually solve the problem? Someone at - it suggestions?
Sorry if this isn't in the right place, please inform if not.
Thanking you in advance for helping me fix my computer with aplomb, or dish being honest enough to tell me there is really no way to ever find what is actually wrong with it, unless I have spend most of my life in the effort.
Billbcs42756,
Thank you for visiting the Microsoft Answers community forum.It says error you found a driver that is not normally compatible with Vista, however, that the error only occurs when the computer enters standby or hibernation or wake up from standby or hibernation.
You have the external devices connected to the USB or Firewire ports? If so, disconnect one at a time and see if the problem goes away. If Yes, then you have found the culprit.
Try using the selective startup for troubleshooting method to see if you can identify the driver that could be the cause of the error:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135If this does not work, let know us and we'll go from there.
Thank you
Gloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Driver power state failure; BSOD; Cannot open the minidump files
Two weeks, my computer with Vista has started giving me a BSOD with status message driver failure. I found the minidump files, but cannot open them. The BSOD usually occurs after the computer has entered a sleep or hibernation. I have not added any equipment to the computer and Norton 360 when I scan computer everything seems OK. It is August 10, 19, then 23, also. Don't know what the cause of the problem. Is there general reasons that could cause this or is - associated virus or what?
Thank you
Hello
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 answers (now 4).You can use BlueScreenView to stick the BSOD info in a message here.
NOTICE - report HTML all THE ELEMENTS or right-click on a BSOD line and select the same. Then, copy and
Paste the lines in a message here. Make sure and check the file name section. Also check the time
in MyEventViewer for more information as possible.===========================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
time of the BSOD to provide more information about the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
application goes down has occurred in your system. The information breaks down is extracted from the .wer
the files created by the Windows Error Reporting (WER) of the operating system component of each
time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Ntoskrnl driver Power State failure BSOD window 8.1
Recently I started having this error regularly, my laptop wakes up fashion 'sleep' (whenever I open it).
The system hangs, and in a few minutes the BSOD appears. It takes time to collect data and restart and it turns very slow after that. Unfortunately, I can't parse mindump files correctly, I see that the problem is related to the pilot of ntoskrnl, but if I understand it is not very informative.
Could someone please take a look at my dump files? Or you could advise me on how to read files from dump for more information? Here's my dump file:https://Yadi.SK/d/FRkPLUqQd3qFX
Thank you in advance for your help!
POD
This phenomenon was related to iaStorA.sys Intel Matrix Storage Manager driver from Intel Corp. Yours is 2 years and more. I remove the current driver and install the latest driver available.
-
Driver power state failure BSOD in Windows 7 Professional (64 bit)
The dump for this stop file is on OneDrive at: https://onedrive.live.com/redir?resid=26431A6C4389BE38%21525.
It is the third time I've encountered this problem on this computer, an HP Omni 200, Intel Core I3, 6 GB ram 64 bit.
I would appreciate help with this problem.
Which works perfectly, thanks!
The attached file of the DMP is to bug checking DRIVER_POWER_STATE_FAILURE (9f) .
This bug check indicates that the driver is in an inconsistent or invalid power state.
If we run one! IRP on the 4th parameter of the bug check (IRP address blocked), we get the following:
> [16, 2] e1 0 fffffa800bf68260 fffff80002c63710-fffffa800c0de240 00000000 success error cancel pending
\Driver\USBAAPL64 nt! IopUnloadSafeCompletion^^ usbaapl64.sys = device driver Mobile USB Apple iPod/iPhone.
Look for an update - http://www.apple.com/downloads/
If this is not available, I would recommend uninstalling the software + disconnect and reconnect does not your iPod or iPhone for a few days. If accident stops, that's the problem.
Kind regards
Patrick
-
State failure BSOD workout system
I am currently constantly this BSOD now, there seems to be no kind of coherence when it comes when it happens and it happened more frequently in recent days.
It is one of the Minidump files http://sdrv.ms/15uErK0Joshua
This phenomenon was related to three things.
1 - AiCharger.sys, remove at least to test
2 - RtsUVStor.sys (re - install the most recent driver available) yours is 3 + years
3 USBHUB. SYS run this fixit
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devicesArgs: 00000000 00000000 00000000 00000000
[0, 0] 0 10 00000000 00000000 00000000 - 00000000Args: 00000000 00000000 00000000 00000000
[16, 2] e1 0 fffffa8006745440 fffff80003b1feb0-fffff98038c88e48 00000000 success error cancel pending
\Driver\usbhub nt! IovpInternalCompletionTrap
Args: 00000000 00000001 00000001 00000000
Cannot load the image \SystemRoot\system32\DRIVERS\AiCharger.sys, 0n2 error Win32
WARNING: Unable to verify timestamp for AiCharger.sys
ERROR: Module load completed but symbols can be loaded for AiCharger.sys
[16, 2] e1 0 fffffa800b828900 fffff880061aa880-fffffa800b809cf0 00000000 success error cancel pending
\DRIVER\VERIFIER_FILTER AiCharger
Args: 00000000 00000001 00000001 00000000
[16, 2] e1 0 fffffa800b809ba0 fffff80003b1feb0-fffff98038c88ed8 00000000 success error cancel pending
\Driver\AiCharger nt! IovpInternalCompletionTrap
Args: 00000000 00000001 00000001 00000000
Cannot load the image \SystemRoot\System32\Drivers\RtsUVStor.sys, 0n2 error Win32
WARNING: Unable to verify timestamp for RtsUVStor.sys
ERROR: Module load completed but symbols can be loaded for RtsUVStor.sys
[16, 2] e1 0 fffffa800b829e00 fffff88003e28f84-fffffa800c1c71a0 00000000 success error cancel pending
\DRIVER\VERIFIER_FILTER RtsUVStor
Args: 00000000 00000001 00000001 00000000
> [16, 2] e1 0 fffffa800c1c7050 fffff80003b1feb0-fffff98038c88f68 00000000 success error cancel pending
\Driver\RSUSBVSTOR nt! IovpInternalCompletionTrap
Args: 00000000 00000001 00000001 00000000
[16, 2] 0 e1 fffffa800b829a10 00000000 00000000-00000000 pending
\DRIVER\VERIFIER_FILTER
Args: 00000000 00000001 00000001 00000000
[0, 0] 0 0 00000000 00000000 00000000 - fffffa800cf611a0Args: 00000000 00000000 00000000 00000000
-
Driver power state failure BSOD out of mode ensures
Hey there,
So, every time I take my laptop out of fashion 'sleep', it crashes and gives me a BSOD with the message DRIVER_POWER_STATE_FAILURE. In addition, it takes 10 times the amount of time it takes to start up again later. This problem started to happen a few months ago and I just accepted that I was not using my laptop all that often, but now since I'm going back to school, I'll use it more so I really want to get this problem fixed because it is really annoying. I even tried to reset to factory settings in a desperate attempt to fix, but the problem persists. You guys could help me understand what I need to do?
Here's the last minidump file: https://onedrive.live.com/redir?resid=54A2E611D8286A43! 1060 & authkey =! AOMJhVAq8fTTbeU & ithint = the file % 2czip
Thank you!
DWS1
First thing you need to do is update to win 8.1 store Ms. After that, you need to remove the current iAstor.sys driver and install the latest driver available. Yours is 2012.
If you continue to plant I remove McAfee and use the built in Defender.
-
W3 - 810 driver Power State failure error (BSOD)
I have a W3-810 Iconia I've upgraded to Windows 8.1 and Windows 10. During a recent update to the 2016 office, I had a blue screen and an error message that a failure of State driver had taken place and the computer needed to restart. After a few moments, the computer restarted and I was able to complete the installation of Office 2016. I remember getting this error during upgrade to Windows 10. Recently, while watching a YouTube video, the Tablet locked up and I got the blue screen again, with the same "Driver Power State Failure" error again. I check the Device Manager and noticed that in the "system devices" all of the "Intel platform dynamics and thermal framework (DPTF)" associates pilots had yellow flags indicating that the drivers did not work properly. When I tried to update the drivers I get a message that the latest drivers are installed.
Someone at - it recommendations to solve this problem? Should I uninstalled all the drivers DPTF and reinstall? Thank you.
Update: I drove all DPTF drivers in back to version 6.2.9200.30457 Device Manager and then restarted the computer. I tested the computer to see if I could cause a BSOD pilot State failure occurred earlier today and it does not happen again. I hope that this solves the problem. Thank you.
-
BSOD driver State failure when you watch the video
I got BSOD pilot State failure whenever I watched the video after 1 or 2 hours I'm not a pro so I don't know what to do with the minidump, here's my minidump files files:
https://SkyDrive.live.com/embed?CID=8199191289DEAD64&RESID=8199191289DEAD64%21107&AuthKey=ALCI_45IBfZNPIQHanansyafira
They are related to bftpdskc64.sys TurboPC DiskCache pilot of BUFFALO Inc. doing iAstor.sys crash
I would like to delete TurboPC and iAstor update the latest driver (yours is 4 years old)
-
Watch DRIVER BSOD error - STATE-FAILURE of CURRENT
Hi, I have Windows 8 in HP Pavilion G6. Problem and a large number of errors are occurring in my laptop. I have refreshed, restored, reset and re-installed my Windows several times. Most of the problems occurred in the Bluetooth driver. Every time after that resetting or refreshing, Bluetooth my work for 2-3 days and then she also stops working. Also scanned my system with Norton internet security and Microsoft Windows Defender and Third-software No. third are installed in my system. Can someone help me with this problem? I downloaded the Minidump files on SkyDrive ( https://onedrive.live.com/redir?resid=22D347B8F78B247D%21167 ) caused due to the blue screen (BSOD error shows PILOT - STATE-FAILURE of CURRENT)
Original title: blue screen of death in Windows 8
9F error checking, {4, 12 c, fffffa8007b4e200, fffff8015e8a8780}
WARNING: Unable to verify timestamp for win32k.sys
ERROR: Module load completed but symbols can be loaded for win32k.sys
Probably caused by: memory_corruptionDRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000004, the change in diet has expired waiting to synchronize with the Pnp
subsystem.
Arg2: 000000000000012c, the time-out in seconds.
Arg3: fffffa8007b4e200, the thread that currently holds the lock of Pnp.
Arg4: fffff8015e8a8780Bug Check 0x9F: DRIVER_POWER_STATE_FAILURE.
http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff559329 (v = vs. 85) .aspx
Resolution error blue screen in Windows.
http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors
Uninstall Norton and turn on Windows Defender.
Norton Removal Tool.
https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us
How to turn Windows Defender real-time Protection on or off in Windows 8 and 8.1.
http://www.eightforums.com/tutorials/21967-Windows-Defender-protection-turn-off-Windows-8-a.html
Uninstall and reinstall all the network drivers, including Bluetooth.
Note: Please confirm that the model in the above link is yours, before continuing.
In addition,
Please download a copy of your system information file. Click 'Start' , type "msinfo32" , click on "file" at the top of the page, select "Export" and enter a name for the file and click 'Save'. " Navigate to the file and download the text file generated in a public folder on your onedrive and post the link here.
-
Driver power state failure Acer V3 571 G
Hello!
I use my Acer V3 for more than six months, and recently my computer started to plant several times gives me error: State failure driver. I read it's an incompatible driver in the cause, but I'm not sure. Sometimes when I watch YouTube videos, 360 p (my internet is slow). The video stops and then the cursor stops responding while the sound of the video continues. Shortly after, I find myself on a BSOD. How can I fix?
What is your GPU and what version of your drivers. If you have updated your drivers when it started to happen probably you need to get them off.
Check this too this is probably the problem with gpu drivers.
-
Driver vista Power State failure Blue Screen of Death
Please help me I think it's that I'm doing this... What is going on.. I have replaced the ram and video card, but has seen this problem before I did it... also just reinstalled windows vista... Please help https://skydrive.live.com/redir.aspx?cid=7cbac7e09f2ecb07&resid=7CBAC7E09F2ECB07! 105 & Thierry = 7CBAC7E09F2ECB07! 101 & authkey =! AEE_idLDpolnFKY
Hello
Those showed all CAUSE as a Windows component that means something different it led into error.
Then ZIP or RAR the actuall minidump files and download them on SkyDrive and post a link here for us
to analyze the other.Check this KB:
The shutdown process does not terminate and you receive an error message on a computer that is
running Windows Vista or Windows Server 2008: "Stop 0x0000009F"
http://support.Microsoft.com/kb/972109----------------
You use Roxio or Nero programs? They have been known to cause this problem even
If they worked well for a long period of time. If so check with their support.Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
Troubleshoot BlueScreens - answers top 3 (+ 1 more).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from thereZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65----------------------------------------------------------
References to Vista also apply to Windows 7.
This "might" be a power problem, even if this isn't the most common cause - in this case
It seems that the PSU could be the fault.9F is probably a driver issue. Security/antivirus/antispware programs can also cause these issues.
Have you added the recent devices or the updated drivers - don't forget to check in the Windows updates to see
If a driver has been updated before this happen. This can also be caused by a loose card or cable
and even a weak power supply.This error means that a driver does not properly support the power state. Check in Control Panel - device
Manager to ensure that the drivers are not stop during sleep - double-click adapter - NETWORK adapter
and WIFI - healthy and others - tab power management - uncheck allow the computer to turn off.
Maybe the only has a problem.Start - type in the search - find MSCONFIG in top - right, click on – RUN AS ADMIN
General tab - tick this box start Diagnostic - APPLY / OK - REBOOT
Try it now. If the computer still blue screens thinks that video driver. Otherwise think the card NETWORK, Wifi, sound, or...
(and it might still be video interacts with something else). See following message for my
generic driver update methods.BCCode: 9F 0x0000009F<-- read="" this="">-->
* 1167.html? order = date http://www.faultwire.com/solutions-fatal_error/Driver-Power-State-Failure-0x0000009F-==========================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
http://www.NirSoft.NET/utils/blue_screen_view.html
hangs and displays information about all accidents of a table - freeBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Windows 8 Pro - driver power state failure
Hello
I installed Windows 8 Pro a few months back and get the blue screen with pilot error, failure of State and the computer turned off. Could someone help with this problem?Thanks in advance for your time.I'd say delete the PxHlpa64 entry.
To remove the PxHlpa64 entry double-click LowerFilters and, under value data, delete PxHlpa64 > OK
Create a system restore point beforehand and restart the computer after.
Then update the GEARAspiWDM, which iTunes uses to last version by installing the latest version of hardware drivers (4.020.5):
-
Qosmio X 870 - 14 d driver Power State failure Win 8.1
Well I try almost everything as uninstall the driver to install from the Nvidia site manually, but it may not help.
When I start to play game screen 30 sec later blacker than blue showin screen upwards and it says "Driver Power State failure" after that reboot my laptop and when BOOM opening! I can't see the icon of the Nvidia graphics driver on my toolbar and Im open Device Manager, then click on graphics cards I have only seen Intel(r) HD Graphics 4000 but no idea about the GTX 670 M.
I also have the Geforce experience opening but he says "sorry, GeForce experience could not find a driver for this PC. Help, please.
someone here? help pls
-
Power driver - 8 victory State failure
I bought a Lenova Ideapad a few months ago and have recently been using it more regularly. All of a sudden I'm getting blue screened when he returns to mode 'sleep' and get the error message "driver power state failure." and it takes forever to do restart and operation. I have just installed new software on this computer at this point, except for a flash, and PDF Creator is certainly not likely to be what is running at this point. Very frustrating that a voluntarily bought this machine because of his thought of SSD I was getting something reliable that could start quickly.
Admin edited the title of the topic.
Maybe you are looking for
-
My MBP boot with two horizontal lines at the start
Hello I have a Macbook Pro (15 "mid 2015). 2.5 GHz Intel Core i7 OS X El Capitan (1) my MBP boot with two horizontal lines on a black screen after the apple logo. (2) sometimes the screen suddenly became all glitch on the dry mouse 5-7 (2 - 3 times a
-
install HP C4400 on windows laptop 8.1
Trying to install HP Photosmart C4400 printer on my new HP laptop running 8.1 to but when i I put the disc in it says that operating system is not supported. Is my printer too old, about 4 years? Keeping in mind I'm a dinosaur and a technophobe?
-
I lost all my media files after removing the battery for blackBerry Smartphones
My employer asked me to remove the battery from the phone, as they had no trace of the IMEI no to my phone. When I reinserted it all my media files - videos, sound time and pictures - were gone. Again, I have all my contacts and continues to receive
-
drop the raf della fujifil xt10
Come faccio a manage file raf della fujifil xt10 con ACR and lightroom? Thanks Anna
-
Form fields to paste on the new form: pasted fields are resized and rotated.
Form fields to paste on the new form: pasted fieldsare resized and turned.It started just past this week. I created fields on an expenseform of report and some fields have calculations. The form is currentupdated, but I want to use the same fields on