Yellow exclaimation mark on an esx Server

Similar Questions

• How to fix the yellow exclaimation mark problem on c-media ac97 audio device?

  I installed a new copy of windows XP on my PC. But after the installation of windows, I had the problem of no sound at all. I checked the Device Manager to see what the problem is and found that there is a panel yellow exclaimation on c-media ac97 brand, located in sound devices. I tried updating the driver but it says always "impossible to set up the update of the material". This way driver do not settle, and the problem remains the same. I do not have the Cd for my sound card, and I was trying to find the driver for the sound card on the internet. But I could not understand that these are the reasons why the problem is fixed. Please I would like to have the solution to my problem, if anyone can provide. Thank you in advance.

  You must visit the web page of the manufacturer of the motherboard sound card and download the driver for your device and install it.

  No operating system comes with all the possible drivers for everything possible.  Any material support comes form the manufacturer of the hardware itself.

• Yellow Exclamatory mark on the ESX host

  IAM see yellow exclamatory sign on three of host ESX, ideas they are trying to inform

  That's why you have the alert. If you do not have a redundant console, either 2 physical NIC connected (and active) for the vSwitch who has the service console, or separate the 2 service consoles that have each their own vSwitch complain vCenter.

• In Device Manager, OTHER DEVICES has yellow question mark

  I always have problems with sudden black screens with auto restart.  It has been suggested that I get a new video driver, so I went into Device Manager, and since there is no list for video devices, I looked in the other devices section (which has PCI Simple Communications Controller, SM Bus controller, video controller, and video controller - compatible VGA) there is a yellow question mark next to each one.  I opened each of them and read, "Unknown manufacturer", and "the drivers for this device are not installed (Code 28) ' how to find who is the manufacturer and model and the version?

  It might be true that it doesn't work with Windows 7, I never said it would work with Windows 7 (it's the XP forum, don't forget!) but there may be something similar.  Since WIndows 7 is so wunnerfool, they just left that have a completely since there must be no need for this.

  99% of the things on which I work is some flavor of Windows Server, XP or Citrix and haven't seen nobody wants to even consider moving their campus everything to Windows 7 and I do not see happening any time soon!  It is not in their plans at all.

  I support a handful of populous (just a few) who have systems that require Windows 7 for some features and other things though, but they are just itty bitty compared to the basic XP installed.

• in Device Manager, I see yellow question mark in the infront of ISATAP adapter #5 network drivers... its donations windows cannot load the device code 31 driver... Wat shud I do? answer as soon as possible...

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messagesn Device Manager I can see yellow question mark in the network in front of the ISATAP #5 card drivers... failed to load its donations driver for device code 31 windows... Wat shud I do? answer as soon as possible...
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Control Panel - Manager of devices - right click on those - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
  and on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message
  http://support.Microsoft.com/kb/932520

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• installation of the agent on the vmware ESX Server

  Hi, im trying to install the agent 2.7.6 on an esx server of vmware 3.01, somehow, the agent does not connect to the administration server, I opened the ports on the firewall of esx with esxcfg-firewall - openport port 7443 and 2144 but I still can not the agent to connect to the management server... everything I forget?
  
  Rgds

  Hi Nicky,

  We will clear up the confusion of port for the next version.  Regarding
  availability be yellow, I believe that it is through the combination
  the VMware API in 3.0 is much slower than ESX 2 times 20
  VMS exposes this recently fixed issue: http://jira.hyperic.com/browse/
  HHQ-437

  You can find a patch fixed the issue that should solve your
  lights of availability.  Let us know if that helps.  It is also possible
  to reduce the memory usage by disabling the plugins that vmware
  Buy adding to agent.properties:

  plugins.include = VMware

  You can also change the max heap size in agent.properties:
  agent.javaOpts =-Xmx128m

  On 15 January 2007, at 03:52, Haan Nicky wrote:

  > okay... It's already better... but first, autodetect didn t
  > work for hyperic settings, when you try to set it to 0 for the port.
  > He complains the port must be between 1 and 65535.
  > change the settings on the execution of the agent already has failed
  > either, so I killed the admin machine and deleted data
  > folder on the computer of the agent, after the reset and the
  > the right credentials and port 443 (Please note that the)
  > authd.client.port is 902... and not 443, check/etc/vmware/config
  > for this authd.client.port = '902', so I obviously thought that of
  (> What is necessary in the settings, maybe just state port 443 here?) I have
  > then started the inventory, which is quite long (10 minutes) and
  > memory and CPU was quite up on the esx Server (this is a double quad
  (> xeon machine with 16 concerts and about 20 vitrual machines running)...
  > the agent runs now, but somehow I think that the moment a large number,
  > availability is always on the yellow... I think that the agent
  > must refine even more here... on an esx 3.0 server there are only
  > 1 cpu and limited memory available for the linux Machinehote...
  > maybe it's not enough for the agent?
  >

• may I present peripheral fibres in strips to esx server

  Hi, I intend to present a tape drive to an esx server using a SAN fiber connection. I found documentation of the compatibility of the esx 3.5, that it is an unsupported configuration. I can't find documentation referencing esx 4.0.

  Do you know if devices with bands through a SAN to esx 4.0 for purposes of backup is supported?

  Also, if I have ESXi 4.0 what Daddy no console then maybe players SAN tape cannot be configured or supported?

  Thank you, Mark

  Hello.

  Do you know if devices with bands through a SAN to esx 4.0 for purposes of backup is supported?

  Also, if I have ESXi 4.0 what Daddy no console then maybe players SAN tape cannot be configured or supported?

  ' ESX/ESXi does not support devices of band FC connected. "-p. 29 of the Guide of Fibre Channel SAN Configuration

  Good luck!

• CPU ESX Server

  Can someone explain how server esx, a CPU resource allocation and how VM using the CPU?

  See also:

  http://www.yellow-bricks.com/2009/08/13/vSphere-CPU-scheduler-whitepaper-this-is-it/

  http://blog.scottlowe.org/2008/06/30/VMware-ESX-CPU-scheduling-information/

  http://decipherinfosys.WordPress.com/2007/02/13/how-VMware-ESX-Server-allocates-CPU-resources-to-virtual-machines/

  André

• Impossible to delete standby ESX server all Virtual Center

  Hello!

  Anyone know how to remove a 'death' of Virtual Center ESX Server? The server is in standby when he "died".

  / Hans

  Welcome to the Forums - you should be able to right click on the server name and select Remove from the inventory - this should remove the inventory of VC-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• VMware ESX Server 2.5.0 build-11548 - licenses can be centralized in vCenter 2.0.2?

  VMware ESX Server, version 2.5.0 build-11548

  VC V. 2.0.2 Build 50618

  My current mission is with some legacy equipment and versions.

  When I add an esx host to vCenter (see versions above) - I don't get any options to add the 'module' of license to vCenter. The 3.0.2 host works well with a license from the local host and Add-ons vcenter. Version 2.5.0 host has a configured host license. I figured I could use a license for the host of the server and add vMotion, HA, DRS & as Add-ons of vCenter. Selecting the host 2.5 licenses tab is not activate 'configuration of the host' link or it lists license config below.

  Also, if I should not just use vCenter 2.0.2 for esx 2.5.x guests... please chime in with the grounds.

  Can the server vCenter 2.0.2 licenses treat the add-on (vMotion, HA, DRS) licenses for a range of esx 2.5.x with a local host (Server/SMP) license (s) OR even just centralized? It does for 3.0.2 without effort.

  No - vmotion, HA and DRS is not possible with ESX 2.5 - even if it was possible to use the license server centralized with VC 2.0.x these features of VI - 3 can have be used with older versions of ESX.

  If this is not the case, can I change esx 2.5.x to open ports or to start a service allowing the centralized license mgmt?

  The only way to manage centrally ESX 2.5 license is with VC - 1, x -.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Move a whole virtual machine snapshots to another ESX Server is

  Hi all

  I'm doing an exact copy of a virtual (including snapshots) computer on an ESX Server 2. I thought that the user interface can use the vcbMounter command, but it does allow me to bring over all the snapshots. I tried a copy directly the files but I couldn't find a way to open the virtual machine in the 2nd ESX Server. Is it possible to copy an instant set VM and it is or I have to copy the entire ESX Server?

  Thank you all,.

  Mark

  you have vCenter?  You could do a cold migration.  Otherwise, you should be able to use VMware Converter.  But, what will happen is all the snapshots is engaged in the originally hard

• ESX Server and 64-bit

  Hello

  I just install ESX Server Infrastructure 3 on a 64-bit Dell Poweredge and everything seemed OK until I tried to install a 64-bit Windows Server 2 K 3 o/s.  VMWare is saying that I can't install an operating system 64-bit on 32-bit hardware.

  Is someone can you please tell me if there are any changes I have to do to run 64 bit? Or are there two types of ESX, 32 and 64 bit?

  If there is a version that I need to use to run 64-bit Windows can someone please tell me the version I need to install, or better yet, to provide me with a link to the download

  Thanks in advance

  Bovine meat

  Happy to help you.

  Please mark this thread as answer if you are ready. (oh and don't hesitate to assign points if you like too)

  See you soon!

• RAM ESX Server?

  We currently have an ESX Server with 8 GB of RAM with about 6 VM. I'm going to add more virtual machines I need also us just ordered Dell PowerVault MD3000i iSCSI RAID since the virtual machines will be on the MD3000i am good with the 8 GB on the host or I need to improve?

  It depends on what are virtual machines? I would look to see what memory is used by the virtual machines currently and especially if the balloon driver is used - if the balloon pilot is active without a doubt, you need to add memory - it can be checked by looking at graphs of performance for the ESX Server - activity of the ToolTip will be displayed in graphics performance for virtual machines.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• VMotion and file on an ESX Server host

  Hello

  We have recently implemented 3 ESX 3.5 servers and configured HA and Drs However, I wonder for VMotion to work correctly, each ESX Server dns name and IP address must be in each box of ESX host file? My last company consultant put all the names of the ESX servers with IP addresses in the file for each host, but this time, the consultant does not. I was wondering if it is advisable or not?

  Thank you.

  KeV

  Hello

  You needn't name resolution for Vmotion. This is based on the Vmotion network, that use only Ip and default gateway addresses.

  On the hand of oter HA need DNS to work. Then you should be able to resolve host names in the bu cluster HA FQDN.

  Have a look here for best practices on HA-> http://www.yellow-bricks.com/2008/10/27/ha-best-practices/

  Best regards

  Lars Liljeroth

  -

• Satellite A200 - Win 8.1: Mass storage controller yellow question mark

  Hello

  After the installation of win 8.1 in old Toshiba A200 - everything is ok except the yellow question mark in "Mass storage controller" in Device Manager. So the sd card reader is useless.

  Have an idea that is the driver for Win 8.1?

  Hello

  Please don't get me wrong, but I hope you know how old is A200. Even more recent machines are not supported for Win8.
  So, I can understand that you want to use newer OS on this old piece of hardware and if most of the stuff works pretty well, you should be satisfied.
  In this case when you use 8 years machine designed for Vista and certainly not taken in charge for Win8/Win8.1... who cares about SD card reader. You know what I mean? ;)

  Just disable the device in Device Manager and be happy.