Yet WT8-B-102 discharge while being closed

Similar Questions

• Yet WT8-A-102 screen auto rotation after update not

  Yet WT8-A-102 screen auto rotation after update not
  I have re installed the drivers

  Now the Tablet does not start-> error - system thread unhandled exception

  The system Thread Exception BSOD error unhandled in Windows 8 arises especially due to incompatible or old graphics card drivers.

  I assume that you have installed drivers that were not compatible
  To solve this problem I recommend you choose the Windows repair procedure

  You should start the tablet in the menu boot device
  Press on and hold the flight button + and hold also the power button until the device turns on and the boot device selection menu appears.

  Now you should be able to choose the option of HARD drive recovery.
  Then choose troubleshooting and got advanced options
  Here, you should be able to repair the system automatically.

  Useful info:
  http://APS2.toshiba-tro.de/KB0/HTD4103K90000R01.htm

• Yet WT8-A-102 stops suddenly and updated the BIOS

  I bought a Toshiba still WT8-A-102 (not part no PDW09E-00100EEN) to the end of 2014. I upgraded from Windows 8 for Windows 10 Home Version 1511 without any problem in 2015.

  I use it for a limited number of applications - Office365 and navigation, generally with Chrome and Hola VPN to access certain geographically limited websites, for example TV channels, watch movies and content recorded from my TV (these are generally. TSV format); I run the free version of Malwarebytes and AVG anti-virus.

  I have two problems I can solve t.
  
  1 stop abrupt
  For a few months now, it always turns off suddenly, always exactly 30 minutes after the start. There is no warning, the screen goes black and that s it. You can immediately restart and continue as before, but the same thing will happen again after another 30 minutes. It happens that it s plugged in or on battery power.

  I can find no reason for this. For example:

  • It didn't happen when I've upgraded to Windows 10 but a few months later.
  • The battery does not turn down.
  • The Tablet does not heat.
  • It occurs regardless of whether you ve been using the Tablet constantly for 30 minutes or simply turn it on and let it idle.
  • Sleep and stop times are set to one hour.

  I ve looked at event viewer and the only things there are a few system errors showing which means nothing to me (a server is not registered within the required). Certainly, there is nothing that happens in the few minutes before it turns off suggesting a reason.

  Any ideas please?
  
  Update 2 BIOS

  I ve installed the different Toshiba updates available for this model. However, the update BIOS doesn t work. She is currently the version 1.60. I ve downloaded the version 1.80 for this model on the desktop. The zip file is bios-20150722112320. I extract it and it starts the process. The Tablet goes on to say it's reboot and then a panel will appear that says:

  InsydeH20 Flash secure
  Invalid firmware image!
  Press any key to reset the system

  It s a Tablet! While they want me to? I ve you press buttons - Windows and volume - but nothing happens. If I just leave it, it turns off after 30 minutes and we re back with BIOS version 1.60 and I can work as usual.

  Although this seems excessive, but suggestions please?

  Thanks a lot for any advice,
  John

  It seems that your problem is similar to mine. I'm having the same random stop downs https://forum.toshiba.eu/showthread...-Error-Code-10 also I have an error code 10 in Device Manager. The agenda called "Intel Trusted execution engine Interface"... are you facing the same error?

  I sent my tablet at the service of Toshiba, it has been over a month now and still waiting to be informed about the problem!

• Yet WT8-A-102 - USB for pc connection

  So I have Toshiba still WT8-A-102 and I want to connect it to my laptop via USB, I OTG cable micro usb to usb female, male-male usb cable, but still my laptop can not recognize me, so I need you to install drivers on my Tablet?

  Friendly V

  You n t need any additional driver
  If you want to connect this table to the laptop, you should not use adapters.
  The Tablet supports the micro-USB port.
  Use a cable / USB micro USB to connect the Tablet

• Yet WT8-B-102 - experience with Win10 updated?

  Hello

  Anyone has any experience with Win10 update for this model? Given many discussions here and my own experiences with update and wireless network card disconnected after (the reset default values to use again), I'm a little worried about the update.

  It was a month ago, so the two sides (Toshiba/MS) had time to provide updates of patches & drivers. So, I'm curious - is the update secure now? All things work out of the box (WLAN, camera) etc. ?

  Concerning

  Originally posted by LegionPL
  

  Hello

  Anyone has any experience with Win10 update for this model? Given many discussions here and my own experiences with update and wireless network card disconnected after (the reset default values to use again), I'm a little worried about the update.

  It was a month ago, so the two sides (Toshiba/MS) had time to provide updates of patches & drivers. So, I'm curious - is the update secure now? All things work out of the box (WLAN, camera) etc. ? I have

  Concerning

  Hello.

  I've updated WT8 my wife a week with no problems at all.

  Take note, however, it takes a LOT of time. Set aside the best part of the day.

  That's what I did on the advice from my research.

  Plug your tablet in socket.
  Check Windows update for new updates and install them. It is the same for all the other programs that you favor.
  Uninstall all malicious programs you may have installed (compatibility issues)

  I also disabled my anti virus program.

  A scope of hand a 8gig USB if you want to create the boot USB installation.
  You don't need to do it immediately as you can do it at a later date.

  During the upgrade, you will be asked if you want to upgrade this computer or do a clean install. I chose the update this computer and transfer my settings (or words to that effect).

  If you want to take the path of own tinstallation, you must first upgrade your operating system current version OS 10 and then when this has been done you need to go through the entire procedure using the boot USB that you created earlier or to creat now.

  The main thing to remember is to be patient, very patient, as the upgrade almost takes care of it's self. Read all the instructions carefully before you click.

  The keyboard that you should select if requested we international. I inadvertently clicked on something else and more later found that some keys on my keyboard had the mind of their own, I got that without too much trouble

  Go for it, I think you'll like the new OS 10. The only downside for the new OS, it's that you may incounter problems driver with installed programs. I think I can live with the Kindle.

  I hope it is of some

• WT8-B-102 does not start even after charging

  I recently bought a Toshiba WT8-B-102, and I have some problems with it.

  First of all, I couldn't install the update to the BIOS for a reason, but this isn't a huge problem for the work of the Tablet very well

  but now I can't start it over. yesterday, I had the same problem, the tab left alone for a while (on the charger) and after that there no start/start. half an hour later, I tried again (after taking the charger) and then he started, but today it won't start at all. Even if I load for a few hours, then try again, try to start charging, etc. It's not good right?

  I don't see that some led light or any other sign when I attach it to the charger. Any help or ideas guys?

  Thank you

  Probably the battery is totally discharged.
  In this case, you need to charge the battery by connecting the power adapter for 30 minutes before turning the power on

  Yet WT8 and Encore WT10 won't turn on after some time of no use
  http://APS2.toshiba-tro.de/KB0/TSB4903N80001R01.htm

  If this will not help, the device must be checked for possible hardware problems.

• Still 2 WT8-B-102 - loading and using a mouse at the same time

  Hello

  I have a Tablet yet 2 WT8-B-102. Anyone know, please, what would happen if I tried to load / use on current electric at the same time that the use of an external mouse?

  I have an adapter that plugs into the micro-usb port and has two connectors USB (life-size). I have attached a USB mouse and one USB key to another and worked well. However, if I plug in a USB mouse and the plug of the charger on the other USB connector (via a USB cable at each end full size) what happens? Would like to fry my tablet, because (in my opinion) I would like to put something in the (electricity) Tablet at the same time as I was taking something (the mouse) via the same micro-USB? The Tablet could not bear, or would I ask it to do too?

  I know this sounds a bit garbled but I did my best to explain what I'm asking, and if someone who can understand what I'm going to talk can help, please, it would be so awesome.

  Thanks for reading.

  Alison

  My blade of ebay 1 megabytes/s usb adapter worked litle, for keyboard and mause but it wont charge the tablet.

• If I click once on an e-mail in the message window while I closed the preview window, I opened that makes e-mail?

  If I click once on an e-mail in the message window while I closed the preview window, I opened that makes e-mail? I worry because I don't want to open a message that my bad-ware download on my computer. If the preview window is closed, I noticed that the number of e-mails read does not change when I click once on e-mail. Can I assume that unread means that it has not been opened.

  Read the answer! Your question is answered there.

  Read / unread is purely an indicator. It has no real meaning. If you go into the menu (alt + T) tools > options > advanced > reading and display, you can change when a mail is marked as read in immediately to 10 seconds (this is what outlook express used) up to 1000 seconds.

  The software marked the email read is that this logic can go. It's always "BOLD", the software did not mark the message read.

  You open the mail? It is an unquantifiable statement.

  In the context of Thunderbird an individual mail is not a discrete element that is stored. It is a part of your data for mail/News. So try to equate open to action just does not fit.

  Thunderbird received mail as a series of lines. He collected in an email that he stores in a file with all your other emails for this folder. You open the file in that the mail is stored? Totally irrelevant Thunderbird opens to get mail every time that mail is added to the folder or to view a mail in this folder.

  Each time a letter is displayed (any mail) the file all your emails for this folder are saved in the opening and reading.

  If clicking on the mail list 'open' the file. Probably not, it was probably already open. The file is opened, read, written to and updated probably half a dozen times since Thunderbird started so if you click on the mail to see won't change anything good at all. If the e-mail file has been closed it will be open to view the contents of the mail, but he is perhaps already open.

  The key is that you try to apply assumptions to mail that simply do not apply. That's why I sound as if I'm going in circles.

  You also may ask, when I fill the kerosene tank my electric light.

  • The software mark mail as read when you say
  • It opens files underlying storage constantly. Clicking on an entry may or may not cause the opening of the file.
  • Your mail is not in a file on its own, it is in a file that contains all the messages in the folder and the mail deleted until the folder is compacted.

• WT8-A-102 does support composite video?

  WT8-A-102 support RCA composite video (TV-out) via micro HDMI port (with the right adapter)?

  And it is perhaps a silly question, but it supports composite video to the 3.5 mm jack?

• Toshiba WT8-A-102 - platform driver to win 10 missing Intel

  TOSHIBA - I REQUEST - THIS IS WHERE INTEL PLATFORM DRIVER FOR WINDOWS 10!

  Status on the page of the driver Toshiba Windows 10 has changed.
  Now, he said: supported model, all of the software available for the upgrade to Windows 10.
  Details: Your PC selected Toshiba is supported for upgrading to Windows 10. All of the software to upgrade is now available. (September 24, 2015)

  ALL SOFTWARE?
  It's ridiculous!
  Nothing has changed - it is not nothing added / updated.
  That status has been updated!

  So Yes - when you want to do a clean install of Windows 10 in Tablet - don't forget that there will be many difficulties / problems as Windows 8.1 Intel Platform Driver, some drivers in Lenevo site installation and some on HP site...

  And besides - Lenevo released drivers for WIndows 10 for their (very similar to even the series) tablets.
  HP also released drivers for HP stream 8 tablets series

  Oh, Toshiba - watch and learn from the best:
  http://support.HP.com/us-en/drivers/selfservice/HP-stream-8-tablet/7439999/model/7682267#Z7_3054ICK0...

  I'm sure that in the only thing Drivers Toshiba development section that make workers is eating donuts and coffee to drink...

  NICE 'SUPPORT' TOSHIBA!
  This is my first and last Toshiba product, because the support is really bad...

  Message has been changed: image has been deleted - bashing

  So Yes - when you want to do a clean install of Windows 10 in tablet...

  Toshiba supports Windows 10 UPGRADE on this tablet.
  Upgrade means that you must upgrade the current system Windows 8.1 to Windows 10 using the Microsoft upgrade procedure.

  Most of the drivers and software that was preinstalled on Windows 8.1 is compatible with Windows 10.

  All other drivers and software that are not completely compatible with Windows 10 can be downloaded and updated from this page or by using the preinstalled Toshiba Service Station:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  In addition Intel drivers are designed and provided by Intel, and can be downloaded directly from the Intel download page

  By the way: there is already a thread of forum on the recall WT8-B-102 - experience with update Win10
  https://Forum.Toshiba.EU/showthread.php?84732

  User PL Légion has provided information of great experience:

  I can say this: everything works in Win10 and 8.1 (with Bing) on this particular model, if YOU DON'T TOUCH THE MY TOSHIBA UPDATE, SAVE for THE BIOS UPDATES. Don't touch wireless and others. Install the drivers from there WIN 8.1 made disappear from my WIRELESS card and I had to go back to the factory settings. I disabled this shit after that and this is upgrade to Win10. Everything works well: WLAN, cameras, etc.

  Here more info about 10 Windows upgrade:

  http://www.Toshiba.EU/innovation/generic/Windows10/

  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  http://win10upgrade.Toshiba.com

  Additional pages:

  Model Toshiba taken in charge for the upgrade to Windows 10
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG
  Models not listed do not support an upgrade to Windows 10.

  Microsoft also provides information on own upgrade on this page:
  http://www.Windows.com/windows10upgrade

  and you'll find all the Microsoft Windows 10 FAQ - Q & A
  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

• NB100 - multi-core of BIOS settings & battery discharge while off

  Hello, I bought the N100-R there are several monts. The unit is very reliable, but when taking take a closer look at the settings of the bios a few days ago I noticed that the multi-core enabled, while the processor is a single-core. After turning off I found that the drive produces some frequent hickups so intense, that the cursor starts jumping.
  Overall performance seems to be less catchy with multi-core disabled.
  The logs say nothing about the problem of hard drive, so I made a recovery today including about 168 updates in a row (as a nice side effect the update manager seem to be able to find the files of package again, which was not the case for two weeks or more).
  My question is, why the multi-core is enabled on a machine simple heart?

  The biggest problem is the issue of discharge while the device is in standby mode or even turned off.
  Some entries to mention this issue recommending upgrades the core among others), and I wonder if Toshiba is about to face in the near future.
  Here, even once, I played with the settings of the bios and disabled option wake-up-on-lan, such as recommended, however nothing has changed.
  Thanks in advance.

  Although single-core CPU, I thought they were hyperthreading (with what looks like two hearts to the BONE). In this case I guess that this setting disables hyperthreading?

  168 updates? What is the first set of updates never applied? Sounds like a lot!

• Re: Still WT8-A-102: broken glass - help with parts / repair

  Hello world

  I bought a Tablet Toshiba still WT8-A-102 a couple of weeks, and unfortunately, I cracked the protection glass, a fall on a concrete slab.

  Anyway, long story short:

  The LCD is intact, the touch function works (95% of the time, about 95% of the surface of the Tablet), only the protective glass is cracked, no splinters seconded, just a simple crack that runs through the entire length of the Tablet nice zig - zag.

  ~ 300 EUROS for sale at retail and service price, they asked for about 160 EUROS fix the thing (which I think this is outrageous).

  So, I'm looking for using the following questions:

  (1) I can't find a service manual. I need one to see if it is mandatory to replace the whole or just the glass screen / touch as well as for finding how to disassemble / mount the thingie.

  (2) depending on the answer to the first question, I'm looking for spare parts (i.e. either a display or the touchscreen device, as I have a VERY good repairer, which ows me a favor, that is why the replacement would cost me nothing)

  (I'm well aware I'm void the warranty, but given the service invoice by the official service of Toshiba, I find myself with choice of o).

  Thanks in advance for your answers.

  Sorry mate but I don t see any other solution for you to communicate with the Toshiba authorised service provider in your country to solve hardware problems or get parts of the compatible device.

  Service manuals are not available for public use. As far as I know, that these manuals are available only for authorized service agents, engineers, etc.

  Here you will find the responsible ASP in your country:
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

• Cannot save NMWG on my new Tablet WT8-B-102

  Hello

  I bought a Tablet WT8-B-102, and when I go to the NMWG page to save it and write s/n, it says that it cannot find the serial number.

  Why?

  Hmm are you sure that you have inserted a good serial number?
  Sometimes people mix - up some letters and numbers that is to say, O and 0 (zero)

  Also, check if your phone is listed on page Details of Toshiba unit:
  http://APS2.toshiba-tro.de/unitdetails/

• Still 2 WT8-B-102 - BIOS upgrade error

  When you try to upgrade the BIOS for my 2 Encore WT8-B-102 through the Station of Service Toshiba I get the error:

  "InsydeFlash cannot load the driver.
  Please close all applications. If you run this utility in WIndows 8, please run as administrator. »

  Even if challenging with a local account or download the .exe of the Web page and right-click Run as administrator I get the same error.

  Any suggestions?

  Thank you and best regards,
  Rainer

  Thanks for your comments!

• Toshiba WT8-A-102 - power problems

  Toshiba WT8-A-102 PDW09E - 00100EEN

  Hello

  I tried to lift a warranty call, but got stuck in a loop Q & A who dropped out, and he presented me with an e-mail form. Completed with all relevant details, but I have received no acknowledgement of receipt of email.

  Anyone know of a SIMPLE way to just raise a ticket, under warranty, for a Tablet where I've got the S/N and P/N and the documents on file command?

  Tablet of my son is still under warranty - he ordered at the end of February of last year and was received in March - but now we'll have problems with it. More often than otherwise, if my son or I press the power button briefly, we get the Toshiba POST screen until the power turns off.

  We even left the tablet in a cradle of office when it turn, so the charge cable and tablet itself does not move between attempts - and sometimes it'll turn on leaving us after many attempts where nothing happened when we pressed the button.

  We swapped with known good cables, so we know that's not the issue.

  On the rare occasion, it stays energized long enough to go to the login screen it still can't do anything with him because the power turns off as soon as the CPU put under any load. Once Windows says that the battery was at 0%, but load. I left it for 15 minutes and it's always 0%. I then put to some Windows updates without disturbing the laptop or power cable and the power cut out less than a minute later. For obvious reasons, this excludes the ability to perform updates BIOS; We simply cannot risk of bricking it.

  So any ideas? Personally I prefer to exchange it for a laptop and pay the difference, but I'd settle for a warranty repair, if only I had a way of presenting that would send me an email back!

  Your tablet is still under warranty, it's good news because in the event of hardware problems, should be set the Tablet for free.

  What you have to do now, is to contact the Toshiba authorised service provider in your country to organize the next steps.

  Here you will find the responsible ASP in your area:
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/