Yet WT8 - microphone is very quiet

Similar Questions

• Microphone is very quiet? Do I have to reinstall my system vista? Thnaks

  Need help

  Hi, thanks for your answers. I tried to return my audio drivers for an older version may be the version by default when I bought this laptop and my microphone works fine now. It seems that the new audio drivers I have installed do work well with my system.

• Satellite U400 - internal microphone is too quiet

  I'm running on Windows 7 x 64. I downloaded the latest audio drivers (4.98.6.61) and is now the internal mic very quiet even if its volume is on max.

  I had Vista x 64 before and everything was ok. I tried the drivers for Vista on Windows 7, but nothing has changed - still quiet mic.

  Thank you for advice.

  Hello

  I had the same problem with my Satellite U400, but on Vista. After updating the audio driver and the BIOS, the problem still existed.
  After searching a bit here in the forum, I have activated the microphone amp and this was the solution! :)

  1. open the 'control panel' (Standard view)
  2. click on 'hardware and sound '.
  3. click on "sound."
  4. click on the "Recording" tab
  5. mark the Microphone and press the button "Properties".
  6. click on the tab customize and set the Microphone Boost control

  Check it!

• Microsoft Lifechat LX - 3000 Volume is very quiet

  Good evening everyone,

  I am running windows 7 ultimate 64-bit edition.

  I recently bought this headset, its works very well, but even with the default volume very quiet sound max value.

  I tried uninstalling and reinstalling with own drivers, also I ran the Audio playback software to diagnose problems with no luck.

  The material looks very good, just the volume itself is very quiet.

  Hello

  Step 1: Check if the article helps you.
  http://support.Microsoft.com/kb/921334

  Step 2: Try to adjust the microphone volume

  a. Click Start, type mmsys.cpl in the search box and press ENTER
  b. in the recording tab, click on Microphoneand then clickProperties.
  (c) in the custom tab, click to clear the Microphone - 20dB
  d. in the levels tab, adjust the slider for the volume to the desired level and then clickOK.
  e. click OK to confirm the sound settings.
   
  Check the Linkhttp://support.microsoft.com/kb/969275

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Microphone/driver issue; Quiet Recorded voices, loud noisy Boost

  Without boost that my voice is very quiet (not understandable) despite the recording level being the max value, but the boost has really annoying white noise which increases disproportionately there worth more high. 10 + boost is doable but not practical (voice is always so calm, boost is still too loud), defining the upper thrust dominates my voice.

  Sound card: onboard 6 Channel Audio of High Def (on motherboard: ASUS® Z87M-PLUS: m - ATX, USB3.0, SATA 6.0, XFIRE)

  Driver: Realtek HD Audio, version 6.0.1.7071

  Current microphone: Logitech Stereo Headset H150 (have had the same problem with other microphones)

  I tried going to the Device Manager and try to update the drivers for audio devices, no updates where found.

  Also try to help out "Audio playback" and "sound recording", both times he had no problems found.

  I installed the new driver tetraethyle3 posted (these exact links seem directly to faulty .exe files, but I downloaded somewhere else), took a bit of faffing around trying to bypass plug-and-play (still not sure how I did it) but it works.

• BlackBerry Z10 Help! Micro very quiet during calls!

  more recently, it has started, but as the person primarily texts that might have started a while back.

  Basically when you call someone, with the ear phone you, the person on the other line can hardly or not even hear you. [How ever when you put on speaker and speak directly into the microphone is always very quiet but audible.]

  I removed the battery and restarted, and it didn't work, so I'll try a wipe secrurity.

  If there is dirt in the mic, and if so how can that be cleaned?

  Thank you

  Do you have no OS update recently? What is the current operating system you have?

  In case of problems although I suggest to Bell store, have them take a closer look, or they can ship the Z10 for BlackBerry have them replaced!

• I have a Yeti Pro microphone. The drivers are installed for her on my Surface... but

  I have a Yeti Pro microphone. Drivers are installed for her on my Surface Pro Windows 10 Tablet.The Mic works very well with the resident of Movie Maker, but Adobe Premier elements 14 tells me that there is a driver issue when I try to save the web cam - on the part of the media add the program. Any suggestions?

  That you click the audio settings button, it should open in a window in which you can select audio input and output settings.

  Like this.

  

• Yet WT8-A-102 screen auto rotation after update not

  Yet WT8-A-102 screen auto rotation after update not
  I have re installed the drivers

  Now the Tablet does not start-> error - system thread unhandled exception

  The system Thread Exception BSOD error unhandled in Windows 8 arises especially due to incompatible or old graphics card drivers.

  I assume that you have installed drivers that were not compatible
  To solve this problem I recommend you choose the Windows repair procedure

  You should start the tablet in the menu boot device
  Press on and hold the flight button + and hold also the power button until the device turns on and the boot device selection menu appears.

  Now you should be able to choose the option of HARD drive recovery.
  Then choose troubleshooting and got advanced options
  Here, you should be able to repair the system automatically.

  Useful info:
  http://APS2.toshiba-tro.de/KB0/HTD4103K90000R01.htm

• Satellite A75 sound very quiet?

  I have the A75 and it works like a dream. I'm happy with it.

  One thing: the sound output is very low, very quiet. Even my MP3 player running on batteries kicking at its best.
  It's just so quiet.
  Everyone had the same problem.

  I visited the installation of Panel and hardware control and turned all the dials I know. (I'm a computer support guy, am so used to torubleshooting)

  Any comments?

  Hello

  Maybe the stupid recommendation from me, but check please button for the volume control on the right side.

• 4 k iMac is very quiet beeps

  I don't have my beautiful iMac for a few days and Ive noticed the small and very quiet beeps randomly. I can't be sure they came though it looks similar to its interior. These are not the normal error beeps that are strong and obvious, but much more quiet and light, but enough to notice.

  I've done several times entered AHT back fine and check my drive and who has spend no error. I checked all sensors using an app sensor signals good times without danger on all so not at all sure that it might be. I do not want to fail on me so soon to own.

  I cannot be sure if it's just a normal quiet beep and I'm just picking up...

  Any help would be good.

  Thank you

  Also don't have mail not open or have outlook if it is not an application

• The Yeti USB Microphone Blue is compatible with iPad Air?

  Hi all

  I recently bought a Yeti USB Microphone blue after reading was consistent with an iPad (iOS 9.2) of Air using a powered USB hub and cables needed.

  I have the mic plugged into the USB hub powered through cable, the iPad plugged into the hub via iPad charging cable and the hub plugged into a socket via the supplied adapter. The iPad, however, does not seem to recognize the microphone at all. Is there something that I am missing or something that maybe, I do not consider?

  Any help on this would be much appreciated.

  Happy 2016!

  According to the website of Blue, all their microphones are compatible. They say however that not all powered USB hubs will work. They do not say why or how whether your choice will be. They mention a Belkin 4 port.

  The other thing I noticed... they use on an iPad analog 30PIN connector 2. Maybe the lightning digital connector is not compatible.

  http://bluemic.com/blog/2011/03/snowballonipad/

• Why is sound very quiet on my Satellite A100-447

  Hello.

  The sound has always been very quiet on my laptop - the speakers a little noise, and with headphones it is barely audible.

  All the usual signs of control volume are 100% and its facilitating registration on balance volume, but built-in speakers might as well not be there. Please could you suggest what goes wrong?

  I've had the computer for 6 months and it has always been like that. Thank you very much.

  I can't give you a professional advice on sound intensity because I can't hear it. Who knows maybe the laptop provides a volume normal, but you mean that he s too quiet.

  Generally all the volume controls must be defined on the level higher then you should get the best volume.

  If you think that there is something wrong with the speakers, ask ASP for a control of the laptop!

  Good luck

• Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone?

  Webcam with integrated microphone.

  Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone? more details on settings please

  to check your setting first:

  Right click the speaker icon in the notification area and choose: Adjust Audio properties.

  Or: Control Panel, sounds and Audio devices.

  Volume tab: click Advanced under Speaker settings and open the drop-down list for the speaker setup and choose your speakers, click on apply.

  Click the performance tab and move the sliders to the complete and best, click OK.

  According to the Volume of the device, click Advanced.

  On the page of the Volume control, click Options in the menu, click Properties.

  Mixing should be your system and not one of your pickups.

  With reading selected all the check boxes.

  Click record, peripheral mixing system, check all the boxes.

  Click play again, and then click OK.

  Volume control, "as you like it".

  Vague, put the max slider.

  All others are ok in the middle.

  Close the Volume control.

  Now we will install your micro Genius:

  Click on the Audio tab:

  Audio playback: System.

  Sound recording: click the menu drop down and choose your Genius mic, click on apply.

  Click the voice tab:

  Reading of the voice commands: System.

  Voice recording: click the menu drop down and choose your Genius mic, click on apply, click OK

  When you want to use your Web Cam microphone, you will need to go back and select again instead of your micro Genius.

• A voice very quiet level multi track.

  Hey,.

  I edit an audio file for clients that sounds balanced hearing normally or through the Waveform Editor , but one of the track becomes very quiet when I put it in the multitrack editor.

  The file seems to be divided into a high and a low level with the lowest level being very quiet and the top is just right.

  

  I have worked with hearing for awhile not but that has really confused me. Is could someone please help me solve this problem?

  Best regards

  Mdbroderick

  Hmm... looks like a pair of stereo tracks in a single file for me. In this case, open it in view Waveform, deselect a pair (Edit > Enable channels or controls to the RHS of the screen) and select Edit > copy again. This will create a new file of just the selected tracks. Since there are two of them, this will be a stereo file. Save it and use it as the copy to insert into a multitrack session stereo. Swap channels active on the original file and do the same thing with the other two and you're good to go - you will have the original split into a pair of stereo files, that you can manipulate individually to get the levels as you want.

  A major advantage of this is that you get to keep the original intact, and we will work on the copies, which is always safer.

• Yet WT8-B-102 - experience with Win10 updated?

  Hello

  Anyone has any experience with Win10 update for this model? Given many discussions here and my own experiences with update and wireless network card disconnected after (the reset default values to use again), I'm a little worried about the update.

  It was a month ago, so the two sides (Toshiba/MS) had time to provide updates of patches & drivers. So, I'm curious - is the update secure now? All things work out of the box (WLAN, camera) etc. ?

  Concerning

  Originally posted by LegionPL
  

  Hello

  Anyone has any experience with Win10 update for this model? Given many discussions here and my own experiences with update and wireless network card disconnected after (the reset default values to use again), I'm a little worried about the update.

  It was a month ago, so the two sides (Toshiba/MS) had time to provide updates of patches & drivers. So, I'm curious - is the update secure now? All things work out of the box (WLAN, camera) etc. ? I have

  Concerning

  Hello.

  I've updated WT8 my wife a week with no problems at all.

  Take note, however, it takes a LOT of time. Set aside the best part of the day.

  That's what I did on the advice from my research.

  Plug your tablet in socket.
  Check Windows update for new updates and install them. It is the same for all the other programs that you favor.
  Uninstall all malicious programs you may have installed (compatibility issues)

  I also disabled my anti virus program.

  A scope of hand a 8gig USB if you want to create the boot USB installation.
  You don't need to do it immediately as you can do it at a later date.

  During the upgrade, you will be asked if you want to upgrade this computer or do a clean install. I chose the update this computer and transfer my settings (or words to that effect).

  If you want to take the path of own tinstallation, you must first upgrade your operating system current version OS 10 and then when this has been done you need to go through the entire procedure using the boot USB that you created earlier or to creat now.

  The main thing to remember is to be patient, very patient, as the upgrade almost takes care of it's self. Read all the instructions carefully before you click.

  The keyboard that you should select if requested we international. I inadvertently clicked on something else and more later found that some keys on my keyboard had the mind of their own, I got that without too much trouble

  Go for it, I think you'll like the new OS 10. The only downside for the new OS, it's that you may incounter problems driver with installed programs. I think I can live with the Kindle.

  I hope it is of some