A voice very quiet level multi track.

Similar Questions

• Why is sound very quiet on my Satellite A100-447

  Hello.

  The sound has always been very quiet on my laptop - the speakers a little noise, and with headphones it is barely audible.

  All the usual signs of control volume are 100% and its facilitating registration on balance volume, but built-in speakers might as well not be there. Please could you suggest what goes wrong?

  I've had the computer for 6 months and it has always been like that. Thank you very much.

  I can't give you a professional advice on sound intensity because I can't hear it. Who knows maybe the laptop provides a volume normal, but you mean that he s too quiet.

  Generally all the volume controls must be defined on the level higher then you should get the best volume.

  If you think that there is something wrong with the speakers, ask ASP for a control of the laptop!

  Good luck

• Microsoft Lifechat LX - 3000 Volume is very quiet

  Good evening everyone,

  I am running windows 7 ultimate 64-bit edition.

  I recently bought this headset, its works very well, but even with the default volume very quiet sound max value.

  I tried uninstalling and reinstalling with own drivers, also I ran the Audio playback software to diagnose problems with no luck.

  The material looks very good, just the volume itself is very quiet.

  Hello

  Step 1: Check if the article helps you.
  http://support.Microsoft.com/kb/921334

  Step 2: Try to adjust the microphone volume

  a. Click Start, type mmsys.cpl in the search box and press ENTER
  b. in the recording tab, click on Microphoneand then clickProperties.
  (c) in the custom tab, click to clear the Microphone - 20dB
  d. in the levels tab, adjust the slider for the volume to the desired level and then clickOK.
  e. click OK to confirm the sound settings.
   
  Check the Linkhttp://support.microsoft.com/kb/969275

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• First item 14: WinTV ts Multi track Audio file number

  I just downloaded trial version of ss14 to test ts WinTV (file) of mounting and discovered multi track audio issue.

  I recorded the football game and imported the file ts at ss14. The problem is, I can hear the sound of the game but the comment disappeared. I can hear the sound of the field but broadcasting comment disappeared. I don't think that there is no audio problem in advertising, but I there is no audio commentary during the game.

  The mixing table"Options" displays 'AUDIO 1 - first plan', 'Voice - leading', '-background music ", 'AUDIO 2 - Background', 'AUDIO 3 - Background'.» I have no idea what track is that.

  I tried to change the setting of 'VOICE' for 'Background', but I got error message saying "one or more selected files could not be automatically analyzed. Whenever I tried to change the setting of the mixer, I received the same error message.

  (I tested another ts file, this saved time TV series, but the result was the same. I could hear the background music, but there is no voice.)

  Can you tell me how I can fix this audio problem?

  Here's my ts file info:

  Format: MPEG-TS

  File size: 22.2 GiB

  Duration: 3 h 12 min

  Start time: UTC-2016-08-25 23:59:51

  End time: UTC-2016-08-26 03:12:35

  Overall bit rate mode: Variable

  Overall bit rate: 16.5 Mbps

  Act score: n/d

  Video

  ID                                       : 49 (0x31)

  Menu ID                                  : 3 (0x3)

  Format: MPEG Video

  Format version: Version 2

  Format profile: Main@High

  The format, BVOP settings: Yes

  Format settings, matrix: Custom

  Parameters of the format, GOP: Variable

  Format settings, picture structure: framework

  Codec ID                                 : 2

  Duration: 3 h 12 min

  Bit rate mode: Variable

  Bitrate: 15.1 MB/s

  Maximum bit rate: 24.0 Mb/s

  Width: 1 920 pixels

  Height: 1 080 pixels

  View picture format: 16:9

  Frame rate: 29.970 (30000/1001) FPS

  Color space: YUV

  The chroma subsampling: 4:2:0

  Color depth: 8 bit

  Scan type: interlaced

  Analysis order: upper field first

  Compression mode: lossy

  Bits /(pixel*Frame): 0,242

  Stream size: 20.3 Gio (92%)

  Audio #1

  ID                                       : 52 (0x34)

  Menu ID                                  : 3 (0x3)

  Format                                   : AC-3

  Format/Info: Audio Coding 3

  Mode extension: CM (complete main)

  Parameters of the format, "endianness": Big

  Codec ID: 129

  Duration: 3 h 12 min

  Bit rate mode: Constant

  Bit rate: 384 Kbps

  Channel (s): 6 channels

  Position of the channels: Front: L C R, Side: L R, LFE

  Sampling: 48,0 kHz

  Rate: FPS 31,250 (1536 spf)

  Compression mode: lossy

  Behind the video:-331 ms

  Stream size: 529 Mio (2%)

  Language: English

  Audio #2

  ID                                       : 53 (0x35)

  Menu ID                                  : 3 (0x3)

  Format                                   : AC-3

  Format/Info: Audio Coding 3

  Mode extension: CM (complete main)

  Parameters of the format, "endianness": Big

  Codec ID: 129

  Duration: 3 h 12 min

  Bit rate mode: Constant

  Flow rate: 192 Kbps

  Channels: 2 channels

  Position of the channels: Front: L R

  Sampling: 48,0 kHz

  Rate: FPS 31,250 (1536 spf)

  Compression mode: lossy

  Behind the video:-299 ms

  Stream size: 265 Mio (1%)

  Language: Spanish

  Text #1

  ID                                       : 49 (0x31)-CC1

  Menu ID                                  : 3 (0x3)

  Format: EIA - 608

  Multiplexing mode: A/53 / DTVCC Transport

  Muxing mode, more information: multiplexed in Video #1

  Duration: 3 h 12 min

  Bit rate mode: Constant

  Stream size: 0.00 bytes (0%)

  Text #2

  ID                                       : 49 (0x31)-1

  Menu ID                                  : 3 (0x3)

  Format: EIA - 708

  Multiplexing mode: A/53 / DTVCC Transport

  Muxing mode, more information: multiplexed in Video #1

  Duration: 3 h 12 min

  Bit rate mode: Constant

  Stream size: 0.00 bytes (0%)

  If there are several audio channels on your media clip, you won't have to hear all the individual channels in Premiere Elements. Premiere Elements cannot separate the audio for the comment, commercials, football game, etc.

  The music, the voices, the Audio 1, etc., on the Smart mixer see audio track on your timeline. And you should be able to tell who is who, looking at the timeline and see which audio clips are on each track.

  If you can't understand it, post a screenshot of your timeline on this forum and we will tell you.

• How to close a gap with the silence, the beginning of a track, Multi track mode?

  Hey everybody!

  I have 2 tracks in multi-track mode... one is music and the other is singing. The music begins at the beginning and lasts 3 minutes. The song does not start until 10 seconds in music. I need to insert the silence at the beginning of the voice, because I send both a producer and I want the line slopes upward from the beginning. Otherwise, they will need to align my singing.

  Thanks for any help. :-)

  Joe

  I would just align the vocal track slide the amount appropriate and right mouse and bounce this track down to another track and then click send this one she would have that 'silence' incorporated in the beginning.

• Satellite A75 sound very quiet?

  I have the A75 and it works like a dream. I'm happy with it.

  One thing: the sound output is very low, very quiet. Even my MP3 player running on batteries kicking at its best.
  It's just so quiet.
  Everyone had the same problem.

  I visited the installation of Panel and hardware control and turned all the dials I know. (I'm a computer support guy, am so used to torubleshooting)

  Any comments?

  Hello

  Maybe the stupid recommendation from me, but check please button for the volume control on the right side.

• 4 k iMac is very quiet beeps

  I don't have my beautiful iMac for a few days and Ive noticed the small and very quiet beeps randomly. I can't be sure they came though it looks similar to its interior. These are not the normal error beeps that are strong and obvious, but much more quiet and light, but enough to notice.

  I've done several times entered AHT back fine and check my drive and who has spend no error. I checked all sensors using an app sensor signals good times without danger on all so not at all sure that it might be. I do not want to fail on me so soon to own.

  I cannot be sure if it's just a normal quiet beep and I'm just picking up...

  Any help would be good.

  Thank you

  Also don't have mail not open or have outlook if it is not an application

• BlackBerry Z10 Help! Micro very quiet during calls!

  more recently, it has started, but as the person primarily texts that might have started a while back.

  Basically when you call someone, with the ear phone you, the person on the other line can hardly or not even hear you. [How ever when you put on speaker and speak directly into the microphone is always very quiet but audible.]

  I removed the battery and restarted, and it didn't work, so I'll try a wipe secrurity.

  If there is dirt in the mic, and if so how can that be cleaned?

  Thank you

  Do you have no OS update recently? What is the current operating system you have?

  In case of problems although I suggest to Bell store, have them take a closer look, or they can ship the Z10 for BlackBerry have them replaced!

• multi track possible adio in media encoding, the Prime Minister or AE?

  Set up a sequence of videos for a client, I created in After Effects.

  
  I made the video and normally I would use either first or After Effects (since default choice what I normally work in) to add a soundtrack after a video final render

  What I do is a long video which repeats itself, but uses different audio tracks every time. But it occurred to me that there must be a way to make it with multi-track then, that you get when you watch a movie, to choose the audio track.

  I can't find anything on it and I don't know why.

  is it just not possible?

  If you follow the instructions in the link, you will get again.

  CS6 still not installed with creative cloud

• Multi-track, audio in the window muffles when it reaches a volume envelope.

  .. .and what is happening with this?  I'm under Audition 1.0 on a Windows XP computer with a soundcard Lynx.  It's a new development.  When the audio reaches the point where the envelope of volume changes, the audio cuts out and not coming back, even if the volume is returned to the unit.  But he's going to mix properly, with the volume changes made.  It's just not possible to hear before mixing down, which doesn't help, of course.  I increased virtual memory.  Anyone have any ideas?  I thank in advance for your help.

  Don't know if this will help...  Try changing the settings of multi-track preview/playback (press F4).  If the read buffer is too large or too small, you might get dropouts...

  Also, try to defragment the hard drive with virtual memory disabled.  With VM off it may run slowly, but it must defragment the swap file, thus making your optimized super drive. You may have to start in safe mode so that it works well...  Of course, you can activate the virtual machine on when you're done...

  Clean dust from the computer and make sure it is not over heating...?

• Monitor - required device and multi Track Record

  I would like to

  1 drag a track on the track into the hearing.

  2 arm track 2 to save.

  3. the voice on track 2.

  4. finish with a voice on track 2, which is in the context of music on track 1 - so I can then manually mix the two stalking after the words.

  It's just if I can follow the track and therefore the voice I hear the track. In a studio as appropriate.

  Currently I run

  1 x IMAC

  1 x EPM900 table Soundcraft mixer connected via the outputs to the IMAC

  1 x Neuman which is connected to the fade an XLR on the mixer

  1 x two mini phono for a single entry mini on the IMAC of entry decision.

  1 x Bose Companion 2 (exit IMAC directly to Bose)

  I can now record in the IMAC and here myself through the headphones into the mixer - play recording by the companions of Bose.

  I guess I have to introduce path 1 to mixer so I can hear the track and voice mix at the same time right?

  So I need a straight audio interface? If so - what kind, £150 is very good.

  Don't know how I make the mixture in my headphones, I guess I could pre fade 1 9 track (i.e. my music) as a hack or just open the fader... oh I'm confused. Even better if you can make 1, 2, 3 for me

  Any help to achieve this would be very useful.

  Well, I couldn't find the 900 EPM on the Soundcraft site... just the 08/06/12 EPM.  Depending on how the EPM900 differs from those I found, there might be a way to make your follow-up help to send on the mixer - bring the computer in the mixer, set the pre melted, increase departures on both the mic and computer chains, but only reveal the fader for the microphone you save.  If you can monitor the departures to the helmet, it would basically make you want.

  However, I would probably recommend you go even when on the road of the audio interface.  Audio integrated on computers are notoriously bad quality (Yes, even Macs), so more convenience you would also get much less noise and a lot more.

  In your price range are quite a few models.  I can personally recommend the Alesis iO2 - I have one that I use for simple location records during the use not my big digital mixing console.  The iO2 goes for about $100 in most USA providers.

  If you want to look at the others, the only feature you want to look for is followed directly.  This will allow you to monitor your microphone without the latency that occurs to send your voice on a round trip via your computer and DAW.

• Yet WT8 - microphone is very quiet

  Hello

  I got a reminder of Toshiba for Christmas and have started to use Skype on it.
  When I do the person I call can't hear me unless my mouth is located next to the microphone.

  Someone else has had problems with their microphones being too quiet or is it a hardware problem on my device?

  See you soon,.
  Nick

  Hello

  Have you checked the microphone recording level?
  Microphone level settings are in the utility of Microphone level.

  Hold down on the speaker icon in the taskbar and select form of recording devices submenu. Select the Microphone and the Properties tab.
  On the level tab, move the Microphone slider to increase or decrease the level of the microphone.

  If you feel that the volume of the microphone level is inadequate, move the slider for Microphone Boost to a higher level.

  PS: this and other details about your device are in the user manual ;) so read it if you want to know how your camera works and how to use it

• Audition (cc2014) - _Tracks_ multi-track export as separate files? Possible?

  It seems like a no-brainer.

  Multitrack is all together, synchronized, leveled - perfect.

  But.

  The client needs of each track in a separate WAV file.

  Should be possible, right?

  And yet... Lot wants to only use raw Waveform files, not the multitrack tracks.

  Export wants only do multitrack mixer (or model, etc.).

  I know I'm missing something obvious bonecrushingly... but I still lack.

  Any ideas are much appreciated. ALL I need are saved as audio files separate titles.

  Thank you!

  Hello

  File menu: mixer Session / any exporting a multitrack. You will notice a "Mixer Options" area is the export dialog box. Check your rods and fire away.

  -paul.

  

• Lines of automation in Multi tracks Dissappeared, I looked everywhere...

  As it is said.   I usually have yellow (for volume) lines on my multi if I can do some quick automation on its auto mode mulitrack audio clip.  I know that you can also do this by clicking on the play button all the way to the left of each track that will bring down a window passes along the track, but for the volume is simply too time and space consuming.  The lines on the multis dissappeared last night and I can not for the life of figure me out how to get them to come back so I can automate volume on multihulls are again. Any help would be GREATLY appreciated. I hope your all having a great day!

  -David

  Menu: view > show the Volume of the Clip envelopes (etc.).

• Want to multi-track out but getting only stereo - first CC

  I have a quantity of video and audio files to Wav - Poly 8 tracks that have been sync be with Pluraleyes.  I saved the XML of Pluraleyes code and then imported it into first CC.  That generated a sequence with two audio tracks (embedded) original from the video files like titles 1 + 2 and the other eight titles of master recorder range as from 3 to 10.  When I play the sequence I see levels bounce back in the Mixer Panel audio clip through all 10 tracks, but when I output to a file MXF OP1a to 10 tracks I get audio only on tracks 1-2 and silent through 3-10.

  I have a sequence with 10 mono tracks on them and I would like to export as a MXF OP1a with 10 audio tracks separated.  Any suggestions?

  You create a sequence with the release of the multichannel value master fader.

  See here:

  http://strypesinpost.com/2012/11/exporting-multichannel-QuickTimes-in-Premiere-Pro/

  If you work with mono elements, one thing you need to do is to make sure that you move all the tracks to make sure track a spell to the odd numbered main track that you assigned to.