You try to run a Modellkonstruktion reflex
get a lack d3drm.dll
Hello Terryyyyy,
Thank you for using Microsoft Windows forum
(a) have you been able to run the Reflex Modellkonstruktion on your previous operating system?
Try to start your system in a clean boot State and check if this is useful:
To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.
Follow the steps below to put your computer in a clean boot state:
Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
1. sign the computer by using an account with administrator rights.
2. click on the Start button, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
Note following this step lets Microsoft services continue to operate. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
5. click OK and then click on restart.
Check the link to learn more about the clean boot below:
http://support.Microsoft.com/kb/929135
Follow these steps to reset the computer to start as usual:
1. click the Start button, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
2. on the general tab, click the Normal startup option, and then click OK.
3. When you are prompted to restart the computer, click on restart.
(b) your operating system Windows7 is current?
If so you will need to update the drivers of your 'video card' from the manufacturer's website.
Read the link MSDN following with a similar problem and a possible workaround.
http://social.msdn.Microsoft.com/forums/en-us/windowsgeneraldevelopmentissues/thread/3c013615-44de-4D8B-B11C-625480238bf5/
Kind regards
Aziz Nadeem - Microsoft Support
Tags: Windows
Similar Questions
-
I extracted to the terminal linux firefox in my own repertoire and you try to run the executable file called firefox. But he's saying "command not found".
You seem to have 64-bit Linux because Linux versions served on mozilla.org are 32-bit.
FTP://FTP.Mozilla.org/pub/Firefox/releases/21.0/Linux-x86_64/
-
Error when you try to run an application that worked when built with 8.6
I have a simple program that I wrote in the 8.6 version that I've never had a problem generation and execution of applications built with it to 8.6. Two weeks ago, I got 2009 by mail because we had very recently purchased 8.6 and I get errors when you try to run an application built with the same code using 2009. The error relates to the Mean.vi. He claims that he can't find it. The error I get is as follows:
Error loading VI 'NI_AALBase.lvlib:Mean.vi '. LabVIEW support 3 error code: could not load façade. I don't have access to the front panel of this vi, so I wonder if there is a problem with the runtime and not my code. Please answer as soon as possible because it will quickly start to the impact of my calendar. Thank you.
Hello!
The same problem ?
I talked with my local OR technical support team. The application now works without any problem.
Rule of thumb: when creating a Setup program do not forget that the option "Run Time Engine xxxx" in the category "Other installers" is selected despite the fact that the runtime is already installed.
Best regards.
-
Get "communication error with kernel" message when you try to run a virus scan program
Get "communication error with kernel" message when you try to run a virus scan program
Hello
What antivirus do you use?
Follow the steps in the article mentioned below and check if this solves the problem.
The error message "error communicating with kernel":
http://KB.eset.com/esetkb/index?page=content&ID=SOLN2280 -
I get the following when you try to run programs such as Nero:-"this program requires the file AdvrCntr6.dll, which is not on this system."
Please can you help me?
Original title: AdvrCntr6.dll
Hello.
There is a guide for fixing here:
http://pcsupport.about.com/od/findbyerrormessage/a/advrcntr6-DLL-not-found-missing-error.htm
-
Error when you try to run Quicken 2011: this program is not supported under XP
Win XP pro - Quicken 2011
I am running win XP pro. When you try to run Quicken 2011 I get an error message: this program is not supported under XP. What I do toget Quicken supported?
For help on Quicken, I recommend posting your question in the community live Quicken . The people there can help you better as we can in this forum of Windows. Boulder computer Maven
Most Microsoft Valuable Professional -
Error code 0 x 80248014 when you try to run MSE Update on Vista 64 bit OS
Tomb guard Windows Update crashes when you try to run the Service Pack 1 for Vista 64 even if it seems to have installed service pack when I view installed updates. Update the window continues to show the service pack update according to availability. So far, I ran it three times and he shows as installed three days in a row, but he does not appear in the properties view and continues to show an available update when I check for updates.
It's a little confusing because the error code 0 x 80248014 appears when you try to update to MSE, so there seems to be two issues. The MSE error one and two, the apparent success of the installation of the Service pack 1 for 64 bit Vista Home Premium but not appear in the properties view and always appear when checking for updates, even if each attempt to install appears to be successful.
Hello
Run the system update tool
http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool
Retry the update
Reset the Windows Update components
http://support.Microsoft.com/kb/971058/en-us
Error MSE - which describes the boots s. is what will do the above tools.
-
Original title;
Linksys wmp54g & windows vista
When you try to run Linksys Wireless Network Monitor I get the following errors:
Cannot load ProcNICs.dll
Failed to load Res_dll
Linksys wireless adapter is installed and running properly, but I can't use the application linksys to establish a new network connection.
Any suggestions?
Thank you.
Hello
I suggest you contact Linksys for assistance:
http://home.Cisco.com/en-us/home
Linksys Support link:
http://homesupport.Cisco.com/en-us/support
I hope that helps!
If you need help on Windows, please keep us informed.
We are here to help.
-
When you try to run chkdsk, it tells me which cannot be executed, the Volume is in use by another process, but trying to run at startup, I am told that the chkdsk command has been cancelled. message also indicates that there are errors. How can I me then chkdsk to run
Hello
See if these two tutorials to help you with this.
"How to run the check disk at startup in Vista or Windows 7"
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
"How to difficulty Chkdsk will not run at startup in Vista"
http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html
See you soon.
-
Check on a friends computer; It can run internet explore unless she added as an administrator. you try to run any .exe gets this pop asking what program to run this title? It could be an association of .exe that is messed up, or is it probably some strange virus? I tried to install IE9, I was able to download but are unable to run.
Start here (especially if you are not familiar with the UAC in Vista & Win7)-online http://windows.microsoft.com/en-US/windows-vista/User-Account-Control-Overview
-
8024A 000 error code when you try to run Windows Update on Vista 32-bit
I get the above error when you try to run Windows Update on Vista 32 bit.
I use an Asus laptop and have used the Asus recovery cd.I just replaced the old HD (500 gb) as it failed with a 750 GB HD.I tried the SP1 upgrade to SP2 and this causes a "catastrophic failure".Any help would be greatly appreciated.Thank youSamThanks for the support. I got the Asus machine this morning and they have corrected the problem in a few minutes by running a short script. In my view, that it is a common problem with Asus and Western Digital HD. Anyway congratulations to Asus. Here, after the service is impressive.
See you soonSam -
When you try to run a system recovery I get this error; OxcOOOOOOf
Original title: error OxcOOOOOOfMy laptop crashed. I used my initial recovery to start. I get a message from Windows Boot Manager as follows:
Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
1. Insert Windows installation disc and restart your computer.
2. choose your language settings, and then click "next".
3. click on "Repair your computer."If you do not have this disc, contact you system administrator or computer manufacturer for assistance.
File: \Windows\system32\winload.exe
Status: OxcOOOOOOf
Info: Seelected entry could not be loaded because the application is missing or damaged.
It does not work. Suggestions and no, I have not modified before the crash.
I loaded my recovery disk for my 32-bit home edition of vista Hp pavilion dv6700 cto entertainment lapt top and after going through the recovery process I just get this mechioned of the screen in the original question. How ever during my recovery process never got far enough to enter my product code, he asked just a two disc and disc supplamentry and then gave me a blue screen black for a minute or two then rebooted and showed the failure of start OxcOOOOOOf screen... what should I do?
Hi Anthony206,
Since you've already tried to use the Windows Vista recovery disc has received from the Original Equipment Manufacturer (OEM).
From now on, you can only contact OEM for the use of the recovery feature.
I hope this helps.
-
Code of State 800070663 when you try to run Windows Update
I get the State 800070663 code when you try to run Windows Update. The update fails. Someone at - he encountered this before?
Hello
see if that helps to fix:
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
http://www.Microsoft.com/downloads/en/default.aspx
-
5 error message when you try to run setup.exe gimp - 2.18.16 after downloading... it reads:
Setup could not create the directory
c:\Users\DEBSWO~1\AppDate\Local\Temp\is-IKDP5.tmp ".
Error5: Access denied
In the Temp folder under Security I have:
'SYSTEM' with full control
"Administrators" with full control
"Username" with full control
All of which is listed in the permissions, but the box for'Include the permissions that can be inherited from the parent to this object "below is checked but not really dim so that you cannot check or uncheck the box?"
The two latest downloads gave the same error message.Thank you for your time.
DebbieI suggest you do this:
1. click on the start planet.
2. type cmd.exe in the search box.
3. press on Ctrl + Shift + Enter
4. click on "run as Administrator".
5. type the following commands exactly and press ENTER after each:
takeown /f "%Temp%" / rCacls "%Temp%" / t/c/g "%nom user %": F System: F
(Enter Y when you are prompted "Are you sure?")
-
you try to run a program, but he repeats to me that the program requires "" MSVBVM50. "." DLL"which is no longer available on this version of windows?
The program you are trying to run has been programmed in Microsoft Visual Basic 5.0.
Depending on your operating system and architecture, install the files of running Microsoft may solve your problem:
http://download.Microsoft.com/download/vb50pro/Utility/1/Win98/en-US/msvbvm50.exe
If they are unable to install, or if it does not, this program is not compatible with your version of windows.
Then your only option to run the program on this computer is virtualization or decommissioning.
I hope that the executable files will help out you!
Maybe you are looking for
-
Name of the window to variable
Hello. In the script below, the very last line, can someone tell me what I am doing wrong, that the date is not added to the line. I swear to you that it must be a very basic problem. All what I get the name of the file is "App" and what I'm looking
-
Why Firefox does not save my sessions?
Everytime I open my firefox now it just opens to the home page. It is located to open the last session and remember my history.
-
Satellite P20-404: WLAN is not working
I wanted to use the adapter wireless network for the first time after a defekt disc and a reinstall. It worked before, but I did not reinstall WLAN right here. Now I don't know how to install it. There is no entry in the network connections that coul
-
Why my audio devices do not go away after I reinstalled Windows 7?
I have a HP Pavilion M7690E Media Center PC. Purchased in December 2006. It has a NVIDIA GeForce 7500LE video card and a Sound Blaster Audigy XFi, map its 24-bit Xtreme Fidelity. When the computer was purchased, it ran Windows XP. I later upgraded to
-
What are some similar to the HP Enhanced Multimedia PS/2 keyboards?
ENHANCED PS/2 HP MULTIMEDIA KEYBOARD Please e-mail of comparable competitive products for my defective keyboard.