you try to run a plugin, error, cannot create the directory cache...,

Similar Questions

• Receives the following message when you try to open a project, "Captivate cannot open the fol.

  Receives the following message when you try to open a project, "Captivate cannot open the next project.  Ensure that the project is not already open... There is enough disk space... "All the critiria are put... still can't open the file.  Please help in the recovery of this project.

  Suggestions here:

  http://www.Infosemantics.com.au/Adobe-Captivate-troubleshooting/recover-corrupt-project

• Standalone downloaded lightroom 6 on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder.

  Downloaded standalone 6 Lightroom on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder. Any suggestions about how to proceed?

  Hi woodysk

  Greetings.

  • You will need to read and write permissions on the Adobe folders manually.

  Please follow the steps below:

  • Right-click on the icon in the Finder and select the 'Go - To' folder option.
  • You will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)
    • ~/Library
  • Then go to the Application Support > Adobe.
  • Right-click on the Adobe folder, then select the GetInfo.
  • Expand the section sharing & permissions.
  • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
  • Please click on '+' symbol, it will open the list of user accounts.
  • Add all of the user accounts and then give permission to "Read & write" to all user accounts. (If not agree, just add currently logged in username and administrator)
  • Click the gear icon and select apply to closed. Close the dialog box for information.
  • Then launch Lightroom application and check.

  Let me know if still face you any issue.

  Concerning

  Rohit

• KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  Hi dakota25,

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• Cannot create the directory on 9000 "BOLD" - FileConnection

  Hi all

  By using the following code on the Curve 8330 works very well, however it does not work on the "BOLD" 9000 * except * I create the directory manually, then it writes the file?

  String fname = new String(fileName);
  FileConnection fc;
  
  fc = (FileConnection) Connector.open(fname, Connector.READ_WRITE);
  
  if (!fc.exists())
   {
     fc.create();
   }
  
  OutputStream os = fc.openOutputStream();
  os.write(data);
  os.flush();
  os.close();
  fc.close();
  bos.close();
  

  Any ideas as to why it does not work on the 9000 "BOLD"

  Thank you

  Paul

  Perhaps you are already best solution.

  For me, every time when I want to create the file, I first have to check the root and folder (specified) exist or not.

  and if I create one and then write the file in the folder. I think that this covers all cases.

  So, I never try directly to create a file with a folder, that nobody know exist or not.

  See you soon.

• When you try to run disk defragment tool I get the message "module stop working" and it closes

  Original title: defrag computer

  Each time defragmentation runs, if at the request, or I try, I get module quit job and program of the windows closed. developed.  Then when he pointed out the problem, I have just sent me to the updates that I have nothing to update.  Not computer smart - could I have deleted something that is originally not not to work?

  1. Please do a check of the file system. Is to find corrupted files and go find everything, he will try to fix them, if possible.

  Start button > Search box type cmd > look up, do a RIGHT click on cmd.exe > click run as
  Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between
  'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  2. make a twilight check that there is nothing wrong with the drive.
  Start button > Search box, type cmd > look up, right-click on cmd.exe > Run As Administrator > in the black and white window, at the command prompt flashes, type chkdsk/f/r > press the Enter key.
  Note: there is a space between 'chkdsk' and ' / '.

  The screen will say something like cannot do it now, but you want to run it on reboot. Click on 'y' as in Yes > press > window cmd of output.
  Restart your computer. It will take a while.
  DO NOT stop the machine. Just wait.

• Create new gives an error "cannot find the directory of the user document.

  Freshly installed Adobe Edge animate CC (2014). When I try to create new ones, I get an error popup "unable to find the directory of the user document.

  I can't remember this error before could you try and open the file from a folder. Unzip it and then double-click on the file to see if it opens.

  directory path.zip - Box test

• Windows Movie Maker - DVD edition gives an error "cannot create the DVD-catastrophic failure."

  Try to publish the storyboard to DVD table. Opens in windows DVD Creator but when burning process is proceeding stops encoding and message appears "unable to create the DVD-catastrophic failure" of ideas where I'm wrong.

  Through the resolution as indicated here: -.

  http://www.WinMatrix.com/forums/index.php?/topic/18361-catastrophic-failure/

  S.Sengupta Media Center MVP

• Cannot create the READONLY cache

  Dear all,

  We try to create a Readonly cache. Here are the details:

  Con1: command > dssize

  PERM_ALLOCATED_SIZE: 307200
  PERM_IN_USE_SIZE: 9585
  PERM_IN_USE_HIGH_WATER: 9585
  TEMP_ALLOCATED_SIZE: 65536
  TEMP_IN_USE_SIZE: 10915
  TEMP_IN_USE_HIGH_WATER: 13728

  Con1: command > cachegroups;

  Group cache CACHEADM. TEST:

  Group cache type: read-only
  AutoRefresh: Yes
  AutoRefresh Mode: incremental
  AutoRefresh State: paused
  AutoRefresh interval: 5 seconds
  AutoRefresh Status: ok
  Aging: No aging set

  Table roots: HR. BIGDATA
  Table type: read-only

  Group 1 found cache.

  Con1: command > call ttgridstatus;

  < MYGRID1_alone1_1: Update member phase 9 >

  1 row found.

  But when trying to LOAD the CACHE, we get following error:

  Con1: command > test LOAD CACHE GROUP COMMIT EACH 256 LINES;

  5056: cache will fail: = < error Oracle > error_type, error_code = < 1740 >,.

  ERROR_MESSAGE: ORA-01740: missing double quote in identifier

  The command failed.

  and once again if if run the command above, we get

  Con1: command > test LOAD CACHE GROUP COMMIT EACH 256 LINES;

  799: unable to connect to the daemon. check the status of demon

  The command failed.

  but the devil is running...

  Help, please?

  You are able to view the statement of 'create a cache...'?

  Thank you

• HELP: "host configuration error: cannot create the file system.

  I am trying to add storage (a number of unit logic of a san fiber channel), but I have this error, as shown in the photos.

  The unit logic (800 GB) number is new and are not used by other processes.

  Does it apply to your Xyratex too?

  Documents found on the net:

  With the current 3i VMware ESX Server 3.5 and ESX Server,.

  Update 2, the creation of the new VMFS datastore fails then

  Xyratex overload management is enabled and the value of Task Set Full.

  :

  VMware newbie...

  Zen Systems Sdn Bhd

  www.no-x.org

• Act 2014 "cannot create the directory of crash reports.

  I am running Windows 7 Home Premium 64 bit on my laptop Lenovo G570 and using IE 10.

  When I download and go through the installation process of the 2014 Act program (which installs and runs OK on my desktop Dell Inspiron 530 running Win 7 - 64 bit, IE 10 pro) I get a message when I go through the installation process that says "could not create directory of crash reports" and when I click on the 'OK' button she closes and crashes.

  And if I restart it upward, he made over and over again.  I even uninstalled and cleaned the applicable registry entries and then tried to download and reinstall it again, but I get the same results.

  I don't understand why this program works fine on my desktop Dell computer but does not work on my laptop Lenovo.

  Of course you would like to help here.

  Thanks in advance,

  Bill

  Moved from Vista programs Forum.

  Hi Bill,

  You can get in contact with the team of application support:

  http://www.TaxACT.com/

• Satellite C55-A-1JL - 10 Windows sound driver - cannot create the instance of the APO

  Hello.

  I have Toshiba Satellite C55 - A (PSCGAE).

  Yesterday, I've updated my Windows 8.1 to Windows 10 and install the drivers.

  Version 1.2.41.0 of his Studio of DTS (32/64 bit).

  When I try to open this application I have error: cannot create the instance APO.

  What should I do?

  You need to update the audio driver (I guess that your device uses IDT HD audio card)
  But double check in Device Manager, then expand the section audio controllers, video and game to find out what kind of sound card you have.

  DTS Studio seems to be already aware...

  So I advise you to go to the Device Manager and uninstall its drivers Associates
  After reboot new, Windows 10 must check updates automatically... in case that it does not happen, you can try to manually start the update of the Device Manager.

• Cannot create the vCloud Director VDC

  Hi all

  Need help with my proof of concept of vCloud implementation Director. running on 5.1 vCloud Director unit. Just to give you an idea, I followed the VMware vCloud Director 5.1 Assessment Guide that we find on the VMware Web site.

  Note: My setup does not contane VXLAN although we have the network VLAN supported to improve network performance.  Of the vExpert mentioned to create a dummy VXLAN right in the vCloud Director and I'm not sure how to do this in vCloud Director console. (I noticed a default VXLAN is already created, I understand vCloud 5.1 has this feature is enabled by default)

  Installation succeeded in creating the Org VDC failed with error 'cannot create the VDC' found this disabling and re activation will release the Red 'X' I think it's false positive because it shows us that everything is perfect even if we get an error message in the logs ' status: error "and with" details: Internal Server Error' find the home images below.

  
  

  " In any case when it comes to download media after having created the catalogue for Org VDC we get the error message cannot complete the operation because the current organization VDC"Demo-Org-VDC"is disabled or is not ready '.

  I also noticed that we get an error message on vcenter Server vcloud (cell) cannot create the folder name already exists check the last my vcenter Server error message.

  also attached the logs in the images below.

  I found two post, which there is not yet of resolution and the other said its solved but does not have the fix.

  Any help to point me in the right direction will be appreciated.

  I will be happy to provide you with newspapers if necessary.

  Thank you

  Ibrahim

  I was not talking about data warehouses.  I refer to the view in the vSphere Client.

  Open the vSphere Client... and go to the computers view models and virtual (c# = Home button at the top, then models and virtual computers)

  In this perspective, there is a number of record Blue icons. Make sure that none have the same name as you describe.

  This is directly related to the error message in the client image vSphere that you took in the original post "cannot create folder. "PNG"

  vCloud produces an error because of something that happens in vCenter.

• FTP - cannot create the remote folder

  Help, please!
  
  I use DW 8 on iMac. When you download my site (using sync or put), all two used to work properly, I now meet the following error message and then I hunted:
  
  "error - cannot create the remote folder / folder name and the path--canceled by the user.
  
  I thought that the file may be corrupted somehow and removed completely from the site. On my next attempt, another file has triggered the same message, and so on...
  
  So I am unable to download my site and the bits and pieces that are on the web are truncated because the site is incomplete!
  
  What can I do?

  You may find it useful to stick with the DW FTP. Having the ability to
  Download up/dependent files is nice, as are the other (select features
  more recent, select recently modified, etc.).

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "hfeurstein" wrote in message
  News:fe8fti$K3U$1@forums. Macromedia.com...
  > To be honest, I don't know if I am running a firewall, I used to be a PC
  > user
  > but got so sick of stupid software windows, virus, constant need
  > updates etc that I bought an iMac and I can only assume that it is
  > running
  > some sort of firewall. In any case, I can confirm that during that time the FireFTP
  > has
  > completed download with no defects, this is why I would need is more DW.
  > Sounds
  > as if the investment is perhaps not quite interesting for a novice like
  > me
  > who really isn't a developer and just use it for simple tasks.
  > mercy
  > However, I like the ftp Sync feature and would like to continue
  > use it.
  > However, sounds as if there are a few flaws in the software
  > who
  > need to be ironed out.
  >
  > Having said all that, I really appreciate your help and especially
  > responsiveness, which is not easy to find these days. I'll take one
  > additional
  > Advisor you may have and thank you once more our support.
  >
  > Best regards, Harald
  >

• When you try to run Linksys Wireless Network Monitor error: cannot load ProcNICs.dll, Can t Load Res_dll

  Original title;

  Linksys wmp54g & windows vista

  When you try to run Linksys Wireless Network Monitor I get the following errors:

  Cannot load ProcNICs.dll

  Failed to load Res_dll

  Linksys wireless adapter is installed and running properly, but I can't use the application linksys to establish a new network connection.

  Any suggestions?

  Thank you.

  Hello

  I suggest you contact Linksys for assistance:

  http://home.Cisco.com/en-us/home

  Linksys Support link:

  http://homesupport.Cisco.com/en-us/support

  I hope that helps!

  If you need help on Windows, please keep us informed.

  We are here to help.