You want to use Flash Recovery Area?

Similar Questions

• in the life situation, is the flash recovery area used often?

  Hi all
  
  in the life situation, is the flash recovery area used often? or being extinguished?
  
  What is general practice?
  
  Thank you
  
  Andrew

  Andrew,

  First that you must answer - what you want to with flash recovery area (FRA). FRA may or may not be used with another technology - flashback database.

  (i) are you using a base of data of flashback (database +, not table or query flashback flashback), i.e. you have lit the flame of the database? If so, you need to use CRF because that's where the FB connect to go.

  (ii) If you don't use flashback database, you can, but you don't need to use FRA. FRA can be used for database backups and archived logs archived backups of logs.

  I strongly suggest not to use FRA for archived logs. As a corollary, I strongly suggest backups seprating and newspapers archived on separate file systems (and underlying disks), if possible. Don't forget, you can always re-create a lost backup using logs archived. but never an archived newspaper lost. If you have lost journal #345, but all the others to have #346-#1000, it doesn't matter; recovery stops at 345. So imagine put backups and newspapers archived on a single point of failure - you lost two of them.

  Therefore, I use different locations for backups and archived logs, somewhat defeat the purpose of the FRA, where both are supposed to go.

  Caveat: I do this for all important databases. If a database is not so important, well...

  I hope this helps.

  Arup

• When you try to open a program, get the area "Choose the program you want to use to open this file".

  When I try and open a program I get the box "choose the program you want to use to open this file. Also, when I try and access any of my icons in my control panel, I get a message saying 'C:\WINDOWS/system32/rundll32.exe. Aplication not found. "

  Uninstall mywebsearch toolbar, Zynga, my fun cards

  Check these then check fix checked. Narrow browsers

  O2 - BHO: (no name) - {5C255C8A-E604-49b4-9D64-90988571CECB} - (no file)

  O3 - Toolbar: (no name) - {CCC7A320-B3CA-4199-B1A6-9F516DD69829} - (no file)

  O4 - HKLM\... \Run: [NeroFilterCheck] C:\WINDOWS\system32\NeroCheck.exe

  O4 - HKLM\... \Run: [HP Software Update] C:\Program HP HP Software Update\HPWuSchd2.exe

  O4 - HKLM\... \Run: [QuickTime Task] "C:\Program Files\QuickTime\qttask.exe" - atboottime

  O4 - HKLM\... \Run: [MyWebSearch Plugin] rundll32 C:\PROGRA~1\MYWEBS~1\bar\1.bin\M3PLUGIN. DLL, UPF

  O4 - HKLM\... \Run: [my Web Search Bar scope monitor research] "C:\PROGRA~1\MYWEBS~1\bar\1.bin\m3SrchMn.exe" / m = 2/w/h

  O4 - HKLM\... \Run: [MyWebSearch Email Plugin] C:\PROGRA~1\MYWEBS~1\bar\1.bin\mwsoemon.exe

  O4 - HKLM\... \Run: [SunJavaUpdateSched] "C:\Program Files\Fichiers Java Update\jusched.exe"

  O4 - HKLM\... \Run: [adobe Reader Speed Launcher] "C:\Program 9.0\Reader\Reader_sl.exe Adobe."

  O4 - HKLM\... \Run: C:\PROGRA~1\MYFUNC~2\bar\1.bin\c8brmon.exe [MyFunCardsbarIE Browser Plugin Loader]

  O4 - HKLM\... \Run: [TkBellExe] "C:\program files\real\realplayer\update\realsched.exe" - osboot

  O4 - HKLM\... \Run: [KernelFaultCheck] %systemroot%\system32\dumprep 0-k

  O4 - HKCU\... \Run: [BitTorrent DNA] "C:\Program Files\DNA\btdna.exe"

  O4 - HKCU\... \Run: [BitTorrent] "C:\Program Files\BitTorrent\bittorrent.exe".

  O4 - HKCU\... \Run: [MyWebSearch Email Plugin] C:\PROGRA~1\MYWEBS~1\bar\1.bin\mwsoemon.exe

  Then download malwarebytesto day then do a full scan

  You are probably infected by something you downloaded with bittorrent

• How to use Flash recovery only for flashback database feature box

  I would use the area of flash recovery only for flashback database feature, which means, the flash recovery area will store only the flashback logs.

  I don't want to use this file system for all other files, such as files of archive log, backups, copies of control files, multiplex redo log, etc.

  is this possible? I want to use this function only for the flashback database option and therefore, I don't want to disturb any existing configuration in my database

  including backup jobs. It will also store the Archives of redo log files in the flash recovery area to use the flashback database feature?

  I can't certainly allow me to have a copy of the entire file system database as my DB size is more than the system recovery flash I have zone files.

  Thank you

  Delphine

  user13312943 wrote:

  Aman,

  I think I was not clear in my question. I'll try again

  My only requirement is to use the flashback database feature (or be prepared to use if necessary). I don't want to create a large file system to use the CRF to store all those files. Out of all the files are stored here a copy of the data files seems to consume more space. I see that these files are classified as transitional and permanent files. I agree with permanent files. I'm afraid that this file system can use more space if I store files of backup to disk. I want backups of databases to go to bands, not on the drive of FRA. Is this possible?

  Thanks for your response

  Okay, well in that case you can use RMAN and push the backups to tape drives. FLB newspapers would be stored on the FRA.

  Aman...

• Application not found error-choose the program you want to use to open this file

  Soon all the world.

  I really hope that someone will post a reply to my question as soon as possible. I will try to be as descriptive as I could possibly, in order to solve my problems.

  The main problem is that I can't open some, if all the program files, applications on my windows 7, 32-bit laptop. I'm constantnly get application not found error, showing in a small window address, I was trying to do. Whenever I want to open a program, like the Adobe reader, word of microsoft, excel, mozilla firefox, google chrome - basically everthing, a window opens and is telling me this: choose the program you want to use to open this file: file: acad.exe... and recommend me acrobat from adobe program, any program I was trying to enter (in this case autoCAD).

  Cannot open cmd, when I go to system recovery, it says: System Restore could not start. I normally post records in: C and: D sheet music, play music, watch videos and see photos. I found a "hole" not being able to go to the internet via a browser. I discovered it when I went to an online help in some of the trobleshoots. It would open tab in google chrome by itself and then on it, I can browse the internet normally, but only through the said track.

  Currently, the microsoft security essentials performs a custom analysis (: C and: D), because I suspect it is a malware, or some kind of virus. It happened when I tried to download a program from CAD Solidworks 2012 via a site that I'm not sure I'm allowed to mention, that I don't want. Unless it's okay with you :) It begins with a letter t. By the way, I noticed that my: partition D has accumulated 10 GB + more in the space of a few days, because I remember two weeks ago I had close to 70 GB of free space, now it's about 56.3 GB. Curious, because I know that I did nothing so great in this period. Maybe I need to tell you that I get this window, from time to time, when I browse the internet (I never visit suspicious sites, or at least I don't me remember more I visited one in a very long time, like 4-5 months):

  [url=http://canadaalltax.com/z/?f=pjrKrjr7vTw8qi5FrTxXrjr4qdgHqjrHqE%3D%3D&eid=727&hid=15769845847361013151&pid=0&ch=666&rf=http%3A%2F%2Fwww.boldride.com%2Fbrand%2Fwilliams-racing&s=px.pluginh&r=0.13960388134319002]http://canadaalltax.com/z/?f=pjrKrjr7vTw8qi5FrTxXrjr4qdgHqjrHqE%3D%3D&eid=727&hid=15769845847361013151&pid=0&ch=666&rf=http%3A%2F%2Fwww.boldride.com%2Fbrand%2Fwilliams-racing&s=px.pluginh&r=0.13960388134319002[/url]

  I found this in my story, be very careful what you do with this link, I don't want that take you anything ;)

  That's on my side, please ask anything and everything, I'll visit this page when I can.

  Good bye!

  P.S. forgot to mention that when I download a program (mozilla Firefox), I can not run it due to: Application not found. I hope I found the right place for it.

  Original title: Windows 7 - Application not found. A big problem or easy-peasy?

  Hello

  Thanks for posting your query in Microsoft Community.

  1. What is the complete error message you get when opening a file?
  2. What happens when you try to open the command prompt?
  3. What happens when you try to access the internet by using Internet Explorer?
  4. You did changes to the computer before the show?

  According to the description of problem errors you get "application not found error" and "choose the program you want to use to open this file" and not being is not able to do system restore, it seems that some windows file is corrupted. I also suggest you to post back the results of analysis.

  I would suggest trying the following methods and check if this is useful:

  Method 1:  Run SFC scan and check for corrupted Windows files and violations of integrity.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

  Method 2:

  For any question, where his prompting you to select the default program
  Try to set the default values for the program
  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-in/Windows/change-default-programs#1TC=Windows-7

  For any question, where you are not able to download and install firefox, download the file and save it and then try to install firefox.

  I hope this helps. Please let us know the results. Feel free to write us again for any help.

• Remove the Flash recovery area

  Hello
  IAM on oracle 11.2.0.1 on windows 2008 64-bit. We have a database with the recovery flash set up in her area. We want to delete (IE completely remove the flash recovery area without affecting the DB). So, what should I do? I can find one of my files to control it. I want to completely remove the flash recovery area so that my data files and files redo, control files can be on the same location. Thanks in advance.

  Hello

  In addition to having a control file in the flash recovery area, which is strange, not desired, I wonder if you have covered Google for the answer: http://www.lmgtfy.com/?q=oracle%20remove%20flash%20recovery%20area

  Transfer the control file to another location means a change in the spfile and restart the database.

  For the rest, refer to the manuals

  Success
  FJFranken

• changing the location of the log archiving PLZ flash recovery area HELP!

  Hi all
  
  My journal archive is stored in an area of memory flash that got the full and the production server is down.
  
  Details of the alerts log file...
  

  ORA-19809: limit exceeded for recovery files
  ORA-19804: cannot reclaim 43432960 bytes disk space from 2147483648 limit
  *** 2010-04-25 14:22:49.777 62692 kcrr.c
  ARCH: Error 19809 Creating archive log file to 
  
  '/oracle/product/10.2.0/flash_rec
  overy_area/EDWREP/archivelog/2010_04_25/o1_mf_1_232_%u_.arc'
  *** 2010-04-25 14:22:49.777 60970 kcrr.c
  kcrrfail: dest:10 err:19809 force:0 blast:1

  I deleted the files and started the database,
  
  Can a good person kindly tell me how to avoid this problem in the future by keeping the destination of the newspaper archive in the flash recovery area.
  
  I want to change the location of the files to archive log, can someone ' a please guide me about hiow to do
  
  I changed the size of the area of recovery flash for now, but I fear that it will be again!
  

  SQL> select * from v$flash_recovery_area_usage;
  
  FILE_TYPE    PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
  ------------ ------------------ ------------------------- ---------------
  CONTROLFILE                   0                         0               0
  ONLINELOG                     0                         0               0
  ARCHIVELOG                99.44                         0              57
  BACKUPPIECE                   0                         0               0
  IMAGECOPY                     0                         0               0
  FLASHBACKLOG                  0                         0               0
  
  6 rows selected.
  
  SQL> alter system set DB_RECOVERY_FILE_DEST_SIZE = 4G ;
  
  System altered.
  
  SQL> select * from v$flash_recovery_area_usage;
  
  FILE_TYPE    PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
  ------------ ------------------ ------------------------- ---------------
  CONTROLFILE                   0                         0               0
  ONLINELOG                     0                         0               0
  ARCHIVELOG                49.72                         0              57
  BACKUPPIECE                   0                         0               0
  IMAGECOPY                     0                         0               0
  FLASHBACKLOG                  0                         0               0
  
  6 rows selected.

  Kind regards
  
  Published by: user10243788 on April 25, 2010 06:12

  following steps should be ok
  (1) create pfile from spfile;
  (2) remove the unnecessary params
  (3) configure log_archive_dest_1
  Note: do not remove the db_recovery_file_dest, db_recovery_file_dest_size, and parameters. they may be required at another time
  (4) stop and start your database using this new pfile
  (5) check if the archives are in one place
  (6) create spfile and bounce database to ensure that it uses spfile

  Please try all the steps test env first and go ahead in the event of success, to production

• Add redo log Member Flash recovery area

  I have an Oracle 10 g server.
  
  Database is in archivelog mode, using the Flash recovery for storage area redo files archive.
  
  He doesn't use Oracle-managed files (db_create_file_dest is not set) - all the examples use until this OMF to multiplex the redo and control FRA files.
  
  Is is possible to multiplex files redo log to the flash recovery area? Same question for the file control also.
  
  
  What I tried, but not successfully:
  
  My FRA is set to C:\ORACLE\PRODUCT\10.2.0FLASH_RECOVERY_AREA\ALEQ.
  
  I added a redo log Member
  C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\ALEQ\ONLINELOG\
  
  The problem is through EM I can't see any use of "Online Journal", but also when I query V$ FLASH_RECOVERY_AREA_USAGE (now I see only the use of archivelog and backuppiece)
  
  My assumption is that the FRA is not used.
  
  
  
  
  Thanks in advance.

  Yes, if you create base without specifying CONTROL_FILES but whose value DB_CREATE_FILE_DEST and DB_RECOVERY_FILE_DEST, then your controlfiles get automatically appointed duplex and OMF. You could do this later with a create controlfile statement. But a more simple and better method would be to use the two parameters from the start.

  Kind regards
  Uwe

  http://uhesse.WordPress.com

• management of the Windows flash recovery area

  Hi experts,
  
  We use oracle 10G R2, enterprise edition on windows 2003 Advanced Server...
  
  We have a size 20 GB database with archive log mode and archiving destination specified to Flash the recovery area. We don't use RMAN as a backup strategy. and are flash recovery size is set to 5 GB. as it is an OLTP system, it generates a lot of log archiving in the flash recovery area, order of frequent newspaper with the redo log file size is 100 MB.
  
  I would like to know, how can I manage the flash recovery area, if I do not use RMAN to specify archivelog retention policy? How can I specify that oracle should keep log archive files to flash recovery are for 5 days? as we know that oracle won't remove any permanent file at least flash recovery area that it is obsolete, and database may hang if there is space in recovery is full... I can take the log backup archive to another disk, but is it possible to say oracle keeps log archiving for 5 days and remove them to recover space in case of disk space full for the flash area?
  
  
  or if I put the retention using RMAN policy, it will take effect for maintain the retention policy and remove the log archiving obsolete in the area of flash recovery after 5 days, even if I do not use RMAN to back up my database?
  
  any suggestions would be much appreciated
  
  Thanks and greetings
  VD

  Vikrant dixit says:
  We use import export for backup of database (political company it's not mine)

  Then suggest or explain this imp/exp is not any type of backup. It's a data dump. And it won't save disaster. There will be data loss. If it's good to society, then it's ok.
  And then perhaps it is not necessary to keep the database in log mode archive if exp/imp is used.

  .. .and archive logs are generated and not backed up yet... that's why I asked this question here how manage space flash in a future close if space is complete in the same...

  Then, you must implement the log backup archive and deletion with rman. And if already happens with rman, then why not go further and use rman for full database backups.

  What you need to do:
  1 understand how often do you need to archive backup logs
  2. When you save them (tape, disk)
  3. making scripts to archive log backup or remove and obsolete backup deletion.
  It may be just a script
  delete any backup archivelog entry;
  remove obsolete;

  Look here for more details on orders:
  http://youngcow.NET/doc/Oracle10g/backup.102/b14192/Bkup.htm#g1050005

• Which user account you want to use to run this program?

  That fairly recently, when I click to start Firefox, and just before it actually opens, I has the following screen:

  "Which user account do you want to use to run this program?

  I did some internet research and it seems as if many people have encountered this same problem.

  What is the cause, is it dangerous for my computer, and how can I get rid of this message?

  Make sure that Firefox is not set to run as administrator.

  Right click on the desktop Firefox shortcut and choose "Properties".

  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.

• I want to use the recovery to any format CD

  I am currently using Windows Vista and I want to use the recovery to any format CD.
  I don't want anything that has been preinstalled to be more on my HARD drive.
  Should what options I use when you use the CD and it will reinstall Windows?

  If your recovery CD contains the Vista operating system then the installation procedure is very easy.
  You need to boot from the Toshiba Recovery CD and follow the instructions on the screen. Installation would format the drive HARD integer (clear partitions too) and would install Vista, driver, tools, tools and software on the laptop.

  Simply said, you will get factory settings books ;)

• Error "windows cannot open this file. to open this file, windows needs to know what program you want to use to open it"appears just after the start on its own.

  After that I typed my password at startup, windows can not open this file. to open this file, windows needs to know what program you want to use to open it.  At this point, I have no one based on nothing and and messages appear literally on its own. I think it's done my computer very slow also.

  What can I do to fix this?

  It's a site file

  Hi Jose7777777,

  • What version of Windows are you using?
  • How long have you been faced with this problem?
  • Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also view the startup folder.

  I hope this helps.

• Which account you want to use to run this program?

  A week ago, just after installation of Microsoft Update, when I start my computer, a box came who said: run as.  Which account you want to use to run this program? [x] current [of user\Owner] protect my computer and data from unauthorized program activity. This option can prevent computer viruses from harming your computer or personal data, BUT selecting it might cause the program to function properly. Current use is already checked, and my options are to check I want is not protected, or cancel. I tried all the options, or just close the box. What is the devil? Why should I see it every time I start my computer? And, more importantly, why would I want to when, "selecting risk the program work correctly?" How can I get rid of this annoying box, since I already have Kaspersky as a guard dog? Thanks, Tess

  No, you are not condemned.

  To make the warning "diagnostic mode" Begone, re - run msconfig and select the radio to "Normal startup" button (cela re - automatically checks the Java update box, as well as all the other boxes you might get UN-ticked).

  The way you described your original message is a bit confusing.  Messages request 'which account you want to use' - what are the choices presented to you?

  Run as.  Which account you want to use to run this program? [x] current [of user\Owner]

  Is the account that you sign normally called "owner"?

  You have an x in the box in front of "Current user" - If the current user IS 'Owner' what does the other box reference?  It may be a better representation of the pop - up:

  Run as
  Which account you want to use to run this program?
  [] Current user / owner
  [] Protect my computer and data from unauthorized program activity. This option can prevent computer
  viruses from harming your computer or personal data, BUT selecting it can cause the program to
  work correctly.

  That is, we really give you a choice of the accounts, but only the current account or anything.

  When you go to control panel > user accounts, is the account that you are connected to a "Computer administrator" or "limited account"?

  You need to do some detective work more:

  • In the Startup tab, run msconfig and uncheck ALL items.  If the "RunAs" message does not come to the top, you know that one of these elements is the culprit.  Selectively, double-check items (you can do as a group to save time re-boot) and re-start until you determine what startup item causes the error.  Once you have identified the startup item that is causing the problem, post back with his name and I will try to help you determine what to do about it.
  • The "RunAs" message continues even with all uncontrolled startup items, you going to dig deeper.  Reset things to normal by selecting the option "Normal startup" button and follow the steps.  I'll look at other things that start when Windows starts and see if I can suggest the next steps.
  1. Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx --> here
  2. Extract the files (right click on the zip file downloaded file and choose "extract all")
  3. Run Autoruns by double clicking on autoruns.exe (not autorunsC.exe).
  4. When the scan is complete, click file > save and save AutoRuns.arn in a place where you can find it later
  5. Download AutoRuns.arn on your SkyDrive (go to https://skydrive.live.com/ and log in with the same name of user and password that allows you to connect to ask questions here)
  6. Right click on the file downloaded and select 'Sharing' then 'Get link' and 'display only '.  Copy the link and post it in your next reply here.  See http://windows.microsoft.com/en-us/skydrive/share-file-folder

• Not able to open programs 'open with' appears with the message "choose the program you want to use to open this file."

  Original title: what is savagent.exe.

  I started having trouble opening all my programs...  A 'Open with' box appears only the message "choose the program you want to use to open this file: file: * .exe ', and I only have two choices, either Microsoft Office OneNoteQuick Launcher or Wordpad...  Since none of them are the program that I want, I click on the Cancel button, the popup disappears and the program does not open.  Internet Explorer is the only exception it opens when I click on Cancel.

  I am running Windows Vista on a Dell 1525.  I did a general online search, but the concflicts information too for me make sure my best option.

  Thanks for considering my question.

  Correct me if I misread your message.

  You said open with dialog box appears whenever you try to open a program?

  If so, try this...

  http://forums.techguy.org/Windows-Vista/899995-solved-Open-box-opens-every.html

  Scroll down to the answer given by Phantom010:
  Download and merge the reg. EXEFIX .

  quote...
  Try this registry fix: EXEFIX

  Unzip the patch and extract it. REG file on your desktop. Right click on the REG file and choose Merge. Note that you must be an administrator to apply this hotfix.

  Reset.

• HP Pavilion DV7 lid is broken. You want to use external display.

  My screen was damaged and I had a technician to replace it, but in the process, he broke the lid. The hinge brackets broke, scokets for the screw on the lid broke, and I'm unable to get spare parts, so I decide that I want to see if it is possible to disconnect the screen, remove the cover, because he just flip-flops it and use my TV as an external display.

  The problem is when I connect it to my TV via VGA or HDMI, nothing is displayed on the screen until the computer was started in Windows 7. Is there something I can do?

  Hello jcvamp,

  I understand that your screen is broken and you want to use an external monitor.

  You are able to use the external monitor, but as you say you will not be able to load BIOS.

  The BIOS can be displayed on the primary monitor.