Your computer is low on memory. Quit other programs, and try again.

Similar Questions

• Windows Media Player says * your computer is low on memory. Quit other programs, and try again

  Original title: HELP!

  Hello! When I want to watch a movie on my computer then WMP appears and says * your computer is low on memory. Quit other programs, and try again *. I deleted a lot of files and programs, so I have 13 and 39 GB on my Local drive, but it still does not work. Could someone please help? Thank YOU

  YOU

  It is not said you're low disk space, it says you're low on RAM.  We can tell you more if you tell us your system specs.

• Your computer is low on memory. Quit other programs, and try again. . NO IT's NOT... and no other prog running... player victory med doesn't work anymore...

  I get this message in box "[your computer is low on memory. Quit other programs, and try again. "] When I try to run my videos on wmplayer as ive allways done and now this..." the only recent download, I was able to isolate is silverlight, but have disabled it makes no difference, have already asked on this forum but will try again in the hope, I looked at a few sites referring to this prob, but without a bit of luck, I see is not just me at least... Let's hope that any 1 out there can be help Thank you

  Hello

  You may need to change the amount of virtual memory available:

  Change the size of virtual memory
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  CTRL SHIFT ESC to Task - tab process manager - click on the column of memory (may have to click twice)
  to see what is using all the memory that should not. Right-click on anything that uses a lot of memory
  and there might be other options like going to Services where "there" is a service associated with
  Note.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• MESSAGE: Your computer is runing out of memory. Quit other programs, and try again. I don't have enough memory. What could be wrong?

  When you want to play a downloaded video

  Is the video you are trying to read the HD? If it's a 720 p or 1080 p video, it might be several gigabytes in size, and for this to open and buffering for reading you must have enough available memory to do.
  Are you sure that you do not have high memory use? Press CTRL + ALT + DELETE and choose TASK MANAGER. Make sure that none of the open programs are using large amounts of memory.

• Computer error memory, quit the programs, and then try again

  Original title: Error Message

  I get an error message saying: my computer is running on low memory and to exit other programs and try again, but I wouldn't open

  I get an error message saying: my computer is running on low memory and to exit other programs and try again, but I wouldn't open

  Prevention of problems of memory

• Windows Media Player will not play error of MTS files that your computer works at low memory. Quit other programs, and then try again

  I am running Windows 7, 64 bit, home premium on a Dell Studio 1558 with an ATI Mobility Radeon HD4500-5100 graphics card and an Intel Core i3. It has 4 GB of RAM.

  When I try to read files MTS using Windows Media Player I get the error message "your computer is low on memory. Quit other programs, and then try again,"even with no other programs running. Windows Media Player will play other types of video files without difficulty.

  Any suggestions as to what can be the cause of the problem and how to fix?

  TBH I'm not sure.

  All I can say is on my desk, I have not loaded a pack of codecs only support of any kind and WMP12 plays my MTS files very well. Supported by this statement in Windows Media Player 12 is also capable of playing AVCHD formats (. ) M2ts et . MTS ). ^{[13]" from -} http://en.Wikipedia.org/wiki/Windows_Media_Player and the fact that in WMP12 - "Media files (all types)" MTS has listed as an acceptable format.

  My office has an AMD/ATI HD5670, and like I said seems to play.

  1. Have you tried to run a full anti-recent virus scan? If this isn't the case, update your antivirus program and run a scan full to see if it finds problems.
  2. Then try a sfc/scannow scan to see if it detects and fixes something.
  3. Just checked, you have installed WMP12? (it should be, but just a double check).

  This type of problem (or similar) has developed before items such as http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-Media-Player-and-low-memory-issues/bb4bf226-8bd0-41A5-9eed-9be08e6d3bdb and  http://www.TomsHardware.co.UK/answers/ID-1699934/computer-running-low-memory-Windows-Media-Player.html and some people said re-register the DLL of WMP files helped. Personally, I've never needed to test or try this kind cannot confirm.

• Close programs to prevent the loss of information. Your computer is low on memory. You save files and close programs. Java (TM) Platform SE binary Windows Media Player

  Hello

  I keep getting the following error message, and leterally having my computer off over and over again, even if I added 1 GB of RAM (now 3 total RAM) mor and also added a 8 GB SD card as more power:

  Close programs to prevent the loss of information.  Your computer is low on memory.  You save files and close programs.  Java (TM) Platform SE binary Windows Media Player

  I did research on the various search engines to know that many face the same problem, with a variety of possible solutions, but so far, none work.  We suggest that I go to Regedit and change the permissions of the user and then delete the old files, after I import them.

  Needless to say, I am just a user and have just a bit of technical knowledge.  The local PC repair shop in my town has no idea what to do.  For anyone who has a solution to this problem, help will be greatly appreciated!

  Randy Kline

  First of all, unless you know EXACTLY what you do and WHY you do it. I personally recommend never do anything in regedit. I consider myself a moderate to advanced computer user and a moderate user of windows. And I always stay away from regedit, if I can, because you can seriously screw things if you don't know what you're doing... Although, to be honest most of the settings will not have a devastating drama.

  It seems to me that this is a memory leak in the program, you will get this error message to make sure that your computer will just crash, because if she is running out of RAM... Well it will crash.

  If you have a 2 and a 1 GB for a total of 3 GB, I recommend the upgrade once more and just round up to a nice 4 (this is the most of memory a 32-bit system can handle in total)

  Works of memory in a way that you see really only a few performance jump with memory dual channel, the only way to have that is really striking the rods of same in each slot.

  There isn't really a reason that this happens every time, except that simply your computer is low on MEMORY, when your computer says this means RAM, not disk memory storage area.

  If you clean your computer of the programs you never use and stop using windows media player (itunes is better in my opinion, even if you don't have an ipod), you can see an improvement, but to really isolate the problem, I recommend simply opening your task manager as soon as you start your computer (ctrl + alt + delete usually gives you the option or it opens directly) otherwise you can do start-> RUN taskmgr.exe , OR type taskmgr.exe in the search box and press on enter.

  Then, look at the column of memory as I said it sounds like a program has a leak, and you will see that is because memory will begin at low/normal and then numbers just keep climbing...

  Also, make sure that your computer recognizes all 3 GB or RAM. in Task Manager if you have access to the performance tab, under physical memory must be a thing called Total, 3 GB = 3074. If this is not an option in your reason, you can go under Accessories/System Tools system information (on the start menu). (may take a while to load) but on the home page, you should see something that indicates the amount of TOTAL PHYSICAL MEMORY. You want to read this / 3GB or 3074 MB.

  Hope this helps some!

  I recommend to remove all programs, you are ready to, especially those that you never use. Do a complete uninstall. Then start installing windows clean (download google) just to make sure that the program has been removed. then go start--> run msconfig OR just type msconfig in the search and click on go (I don't know if you're running XP or Vista/7)

  In the msconfig dialog, you should see a section that says startup. Don't forget to remove programs that you do not first. Disable startup programs, you use every DAY. Don't go turn off all if windows needs some process to run, and some processes don't effect anything. But if you're curious, you should be able to google all of startup items and see what it's related to and why you do or that you don't need.

  Good luck! Sorry, I'm everywhere with this response.

• Windows 8 - your computer is low on memory-save and close files or restart

  Your computer is low on memory - to restore the memory for programs to work correctly, save your files and then close and restart all open programs.  Don't know what to do.  I have Windows 8.  The printer is also slow and difficult to work.  He says that the printer is offline.  Help

  just for Samsung ultrabook

  many users ultrabook Samsung had a problem with the RAM and noticed that it was related to the presence of the software named IntelliMemory... this software is preinstalled by Samsung...
  I searched in my Samsung ultrabook, but doesn't have a DIF he...
  then I started searching on google and found that IntelliMemory is a software produced by the company 'Condusiv Technolgies'...
  I went to C: / / Porgram files and subfolder found a "Condusiv Technolgies '...
  wanted the .exe inside. It is an executable named 'expresscache.exe '.
  then uninstall the expresscache and everything is back to normal...
  and my RAM could take a rest...

• Error: "address book has been locked by another application. Please, close other applications and try again.

  Original title: locked file on CD by an unknown application. How can I find?

  I burned my address book on a CD. When I try to open the file, I get the following message: "address book has been locked by another application. Please, close other applications and try again.  How can I find what is the other application?

  Hi JimSpell,
   
  This problem occurs if the Windows address book file used by Outlook Express is marked with the read-only attribute.
   
  Follow these steps to solve the problem.
   
  a. Click Start, point to find and then click files or folders.
  b. in the search for files named, type: *.wab.
  NOTE: If you find more than one .wab file, make the following changes for all files.
  c. click file .wab you find. On the file menu, click Properties.
  d. in the Properties dialog box, under attributes, clear the read-only check box.
  e. click on apply and then click OK.
  f. open Outlook Express and test a new e-mail message or try to access the address book.
   
  For more information, see:
  OLEXP: Error Message: failed to load address book
  Note: The information provided in this article are applied to Outlook Express 6 in Windows XP as well.

• I need to allow the data controllers audio multi media that I need to find out how to access services running on your computer, I need to allow for this program and also Windows media center point final

  I need to allow the data controllers audio multi media that I need to know how to get to ser

  I need services running on your computer allow this program and also Windows media center point final. OK here is the problem have no sound on my computer, it says drivers are not installed, it indicates one or more programs need to be activated. It is said window media center end point should be activated. It is said he can not activate because no driver I have download the drivers yesterday and he always says the same thing, I have problems in trying to solve this problem, but don't know how I need help ok it tells me that there is no driver for my multimedia audio controllers. I have download then and he says the same thing, he repeats to me also to activate the multimedia audio controllers, I need to know how to get to the program that has all the services of the computer, so I can allow these things that need to be activated I do not know how attend you this program thank you for your help.

  The following articles can help me.

  http://www.ehow.com/how_6533261_install-multimedia-audio-controller.html

  http://www.TomsHardware.com/Forum/57964-3-enable-multimedia-audio-controller

• "Not enough memory or resources to process, to compete close some programs and try again." (Paint)

  I did disk cleaning and started to repair corrupted files.  I went on a new user account and the problem still exists in the new account. While working through process of corrupted file, it says, select all the files except three oldusername form to move.  When I select everything I do not know how to deselect these three and not sure what I should do. I have windows vista.

  Hi Myfruittrees,

  Since you have already tried the system restore and sfc scan, allows to perform an inplace on the computer upgrade
  InPlace upgrade will replace the corrupt files

  STEPS TO FOLLOW FOR THE INPLACE UPGRADE
   
  1 back up all you data, especially C:\My Documents on a media (thumb drive/CD/DVD)
  2 uninstall the security software.
  3 Please unplug all the USB devices on the computer.
  4 disable drivers 'Device Manager' (sometimes drivers come into conflict during the inplace upgrade)
  (a) click on 'start '.
  (b) in the research area, type "Device manager" and press enter and you will see open Device Manager
  (c) click on sing it '+' next to the graphics card that it will expand
  (d) right-click on the driver and choose the option "disable."
  (e) in the same way, you will need to disable the network and sound card video controller and game
  5 turn on your computer in a clean boot
  (To help solve other issues and error messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista or Windows 7 by performing a clean boot).

  (a) click on 'Start' in the start option to search please type "msconfig" and press enter
  (b) select "selective startup" and uncheck the option "Load Startup items".
  (c) then select 'services' and check "hide all microsoft services and click on 'Disable all' and restart the computer."

  5 should disable 3 features, because these features will not be migrated during an upgrade of the /InPlace. upgrade
  (a) click Start and type in "programs and features" in the search box and press ENTER.
  (b) click on "Turn windows features turn on or off" and wait for the popup features
  (c) uncheck the three services mentioned below.

  XPS Viewer (click the .net framework 3.0 plus symbol)
  DFS Replication
  Remote differential compression

  6 Insert the vista disc in the drive.
  7. you will get and option click on 'Install now' and start the upgrade
  8. ensure that you have selected a facility upgrade and not personalized.

  NOTE: AFTER THE INPLACE UPGRADE IS COMPLETED, YOU MUST ACTIVATE THE DRIVERS AND PUT THE COMPUTER
  RETURN TO A NORMAL STARTUP

  1. click on start
  2. type msconfig in the search box and press on enter
  3. in the change of "selective startup" sytem configuration window to "normal startup".
   
  I hope this helps.

  Bindu S - Microsoft Support
  
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Your computer is low on memory. To restore enough memory for programs running, save your files and then close or restart all open programs.

  I don't understand what I have to do. I don't have any open programs or files.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions in the links below that may help you resolve the issue.

  Prevention of problems of memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/preventing-low-memory-problems

  Optimize Windows Vista for better performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Satellite C850 displays message error "your computer is low on memory."

  Hello

  I recently bought a Satellite C850, windows 8 and with portable 4 G RAM. But I still have the error message above, even I just browse the internet. If I ignore this message and continue using, my computer shuts the program I use for Excel for example.

  Well want to can someone help?

  Thanks in advance

  Hello

  From my experience this error message should not appear on laptops that are equipped with 4 GB of RAM. Usually, this should be good enough.

  However, try to expand the size of the virtual memory.

  -Go to the control panel (Windows key + C->-> Panel, settings)
  -Icon-> advanced system settings. (left)
  -On the Advanced tab, under performance, click settings.
  -Click on the Advanced tab, and then under virtual memory, click on change.
  -Claire runs it automatically the size of pagefile for all drives check box.
  -Under drive [Volume name], click the drive that contains the paging file that you want to change.
  -Click on custom size, enter a new size in megabytes in the initial size (MB) or maximum size (MB) box, click on set and then click OK.

• I get an error message saying that my computer is low on memory

  I am running Windows 7 and I have 6 GB of RAM. I don't understand why I get an error message saying that my computer is low on memory when Google Chrome is the only thing open. I just reinstalled Windows 7, so I have no downloaded programs. Then, once I get the error message, Chrome crashes and the computer slows down a lot and nothing wants to work properly. Also, when I try to restart or shut down, she remains on are disconnecting or stopped for more than half an hour, until I have to disconnect the computer from the back because it does not turn off its own. Please help with this. Thank you!

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

• Not able to launch Windows mail get "your computer may be in memory or your disk is full (0x80004005)".

  Original title: Windows mail does not open

  When you try to open windows mail it comes up with the following: Windows mail could not be started initialize junk filtering.  Your computer may be in memory or your disk is full (0x80004005)

  Then when this compensation have the following come upward: Windows could not start because MSOEDLL could not be inialised.

  Hello

  Sorry for the delay in response.

  Try the steps suggested by "Ahmed Cookis" of the link.

  http://answers.Microsoft.com/en-us/IE/Forum/IE9-windows_vista/cannot-open-Windows-mail-error-Windows-Mail-could/62647f2e-d9b4-4ae3-B07C-8224fec4fe1f

  Answer if you need help with Windows, and we will be happy to help.