Keep, send a message, this computer is low on memory

Similar Questions

• Your computer is low on memory. Quit other programs, and try again.

  I note that others have the same problem and said that your suggested solutions did not work, but did you check the motion as answered in all cases.

  I have windows 7 and windows media player 12.0.7600.16667. I play about 3 or 4 videos and get the error message "your computer is low on memory. Quit other programs, and try again. ». As others have noted, I tried the corrections suggested by using the Troubleshoot utility and fixes suggested in similar queries (virtual memory setting etc.). NONE OF THESE WORK! These problems don't to do not manifest until what I installed windows 7 and windows media player 12. What about a solution that works! Returning to WMP 11 would be a possible solution? Any other suggestions besides run the troubleshooter and replace the virtual memory?

  I have gateway with AMD Athlon (TM) 62 x 2 dual core processor 6000 + 3.0 GHZ and 3 GB of RAM.

  Also have ~ 2 TB memory physical and 3 GB of RAM to play with my computer's memory is not the issue, windows 7 or windows media player 12 or the combination windows7 and WMP 12 is the question. If you cannot offer a solution please ask Uncle Bill to divert resources to solve this problem please (preferably before the next version overpriced and underperforming Windows is imposed on an unsuspecting audience). Thank you.

  Hello

  ·    What is this problem only occurs when you use WIndows Media Player or other applications as well?

  ·        Did you the latest changes on the computer?

  Method 1:

  If the previous step fails, then perform the clean boot procedure to verify if a third-party program installed on the computer is the origin of the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  Prevention of problems of memory

  Alternatively, you can follow the link provided below for more information on the problems of memory in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/preventing-low-memory-problems

  Method 3:

  I also suggest to run Msconfig (System utility) and place a check on maximum memory and see if you get the same error again. To do so follow the steps below:

  (a) click Start.

  (b) type Msconfig in Windows search bar and press ENTER.

  c) select the TAB that reads start.

  (d) click on advanced options.

  (e) place a check on maximum memory.

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

  ·        This problem occurs only with Windows Media Player or applications?

• I get an error message saying that my computer is low on memory

  I am running Windows 7 and I have 6 GB of RAM. I don't understand why I get an error message saying that my computer is low on memory when Google Chrome is the only thing open. I just reinstalled Windows 7, so I have no downloaded programs. Then, once I get the error message, Chrome crashes and the computer slows down a lot and nothing wants to work properly. Also, when I try to restart or shut down, she remains on are disconnecting or stopped for more than half an hour, until I have to disconnect the computer from the back because it does not turn off its own. Please help with this. Thank you!

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

• Tecra R840-PT429E - update Bios message: this computer is not supported

  When I try to install the bios update 12/09/12,3.90-WIN(EC_KBC1.60) I get the following message: this computer is not supported.
  Updated the BIOS, I downloaded from the section of the Bios Toshiba for Tecra R840-PT429E update, windows7 64 bit.

  Hello

  Is the a reason to update the BIOS or you want to update the BIOS simply because the new BIOS is available?
  You have a serious problem with the laptop?

  I have no day BIOS, even if the new BIOS is available for my laptop because I have no problems.

  However, the BIOS requires the VAP (value added package).
  This package can be downloaded from the Toshiba UE driver page
  If there is a problem with the VAP, the update of the BIOS would not start.

  So reinstall the VAP to check if this may help

• Qosmio G30-126 - update Bios message: this computer is not supported

  When I try to install the bios update, I get the following message: this computer is not supported.
  I use win xp pro sp2 and the update of the Bios I downloaded from the Bios Toshiba Update section.

  You try to update the BIOS that is not designed for this laptop!
  If you want to perform an update of the BIOS make sure the BIOS is fully compatible with your notebook series and good!

  Notes; bad BIOS or bad BIOS update procedure can damage the module ROM!

• My iMessage keeps sending text messages when I want to send the iMessages iPhone how do I convert it back

  My iMessage keeps sending text messages when I want to send the iMessages iPhone how do I convert it back

  Go to settings > Messages and make sure that iMessage is activated. iMessage will only send with other iOS devices. The iPhone will send SMS if you send to non - iOS devices. You must also make sure that you have given to lit and it is connected to the Wi - Fi or cellular data.

• Everything started getting the message "this computer is not running genuine windows.

  I started getting the message "this computer is not running genuine windows.

  I tried re-activate online and still get the message.

  I tried activating by phone and still get the message.

  The message is on the screen and ran up MGADiag and got the following:

  Can anyone help?

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: genuine
  Validation code: 0

  Code of Validation caching: 0x0
  Windows product key: *-* - KM9W6 - FQ6CV - 676B 3
  The Windows Product Key hash: wzer4Vgu/82pZnlLT5clC4N1KMY =
  Windows product ID: 00371-OEM-9072953-34635
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {FB5EAF24-648F-41E9-99B4-E2F77A0E94A3} (3)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  2007 Microsoft Office system - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395]
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395]
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385]
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385]
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385]
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385]
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385]
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0]
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0]
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\en-us\user32.dll.mui[6.1.7601.17514]

  Other data-->
  Office details: {FB5EAF24-648F-41E9-99B4-E2F77A0E94A3}1.9.0019.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-676 B 300371-OEM-9072953-346353S-1-5-21-807467245-3392229789-2570558715Sony CorporationVGNZ790DINSYDER4044M320091110000000.000000 + 00022C13A07018400F804090409Eastern Standard Time(GMT-05:00)03SonyVAIO1001002007 Microsoft Office system12278FF0D99FEF5AE7Nm6Skf12U + IkMGoB/sNA1ilGbw =89451-OEM-6672725-13787 4

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_NSLP
  Activation ID: e120e868-3df2-464a-95a0-b52fa5ada4bf
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00180-729-534635-02-1033-7601.0000-3622014
  Installation ID: 009885890881275631194586153296712880021192777835802025
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 676B 3
  License status: licensed
  Remaining Windows rearm count: 3
  Trust time: 01/04/2015-16:56:14

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: 0x00000000
  Beyond: 0x000000000001EFF0
  Event timestamp: 3:30:2015 21:34
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current Hash HWID: NgAAAAEAAwABAAIAAAABAAAABAABAAEAln2yeEKnUrCCCPYEgM + iYc7tZGKzbACmhIWA8UbK

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC Sony VAIO
  Sony VAIO FACP
  Sony VAIO DBGP
  HPET Sony VAIO
  Sony VAIO BOOT
  MCFG Sony VAIO
  SLIC Sony VAIO
  ASF! Sony VAIO
  SSDT Sony VAIO

  Hi Mark,

  Please contact the Microsoft community.

  This problem can be caused, if any material changes or if the chips are corrupt.

  • You did significant hardware changes to the computer?

  Please follow the method below and check if this can help:

  When you troubleshoot problems activating Windows, you may need to rebuild the Tokens.dat file.

  This article lists the steps to rebuild the Tokens.dat file.

  https://support.Microsoft.com/en-us/KB/2736303?WA=wsignin1.0

  Follow the article below for your reference and check if this can help:

  http://Windows.Microsoft.com/is-is/Windows/help/genuine/FAQ

  As it is an OEM computer, I suggest you contact Sony support if the problem persists.

  http://eSupport.Sony.com/us/p/select-System.pl?Director=driver

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

• Close programs to prevent the loss of information. Your computer is low on memory. You save files and close programs. Java (TM) Platform SE binary Windows Media Player

  Hello

  I keep getting the following error message, and leterally having my computer off over and over again, even if I added 1 GB of RAM (now 3 total RAM) mor and also added a 8 GB SD card as more power:

  Close programs to prevent the loss of information.  Your computer is low on memory.  You save files and close programs.  Java (TM) Platform SE binary Windows Media Player

  I did research on the various search engines to know that many face the same problem, with a variety of possible solutions, but so far, none work.  We suggest that I go to Regedit and change the permissions of the user and then delete the old files, after I import them.

  Needless to say, I am just a user and have just a bit of technical knowledge.  The local PC repair shop in my town has no idea what to do.  For anyone who has a solution to this problem, help will be greatly appreciated!

  Randy Kline

  First of all, unless you know EXACTLY what you do and WHY you do it. I personally recommend never do anything in regedit. I consider myself a moderate to advanced computer user and a moderate user of windows. And I always stay away from regedit, if I can, because you can seriously screw things if you don't know what you're doing... Although, to be honest most of the settings will not have a devastating drama.

  It seems to me that this is a memory leak in the program, you will get this error message to make sure that your computer will just crash, because if she is running out of RAM... Well it will crash.

  If you have a 2 and a 1 GB for a total of 3 GB, I recommend the upgrade once more and just round up to a nice 4 (this is the most of memory a 32-bit system can handle in total)

  Works of memory in a way that you see really only a few performance jump with memory dual channel, the only way to have that is really striking the rods of same in each slot.

  There isn't really a reason that this happens every time, except that simply your computer is low on MEMORY, when your computer says this means RAM, not disk memory storage area.

  If you clean your computer of the programs you never use and stop using windows media player (itunes is better in my opinion, even if you don't have an ipod), you can see an improvement, but to really isolate the problem, I recommend simply opening your task manager as soon as you start your computer (ctrl + alt + delete usually gives you the option or it opens directly) otherwise you can do start-> RUN taskmgr.exe , OR type taskmgr.exe in the search box and press on enter.

  Then, look at the column of memory as I said it sounds like a program has a leak, and you will see that is because memory will begin at low/normal and then numbers just keep climbing...

  Also, make sure that your computer recognizes all 3 GB or RAM. in Task Manager if you have access to the performance tab, under physical memory must be a thing called Total, 3 GB = 3074. If this is not an option in your reason, you can go under Accessories/System Tools system information (on the start menu). (may take a while to load) but on the home page, you should see something that indicates the amount of TOTAL PHYSICAL MEMORY. You want to read this / 3GB or 3074 MB.

  Hope this helps some!

  I recommend to remove all programs, you are ready to, especially those that you never use. Do a complete uninstall. Then start installing windows clean (download google) just to make sure that the program has been removed. then go start--> run msconfig OR just type msconfig in the search and click on go (I don't know if you're running XP or Vista/7)

  In the msconfig dialog, you should see a section that says startup. Don't forget to remove programs that you do not first. Disable startup programs, you use every DAY. Don't go turn off all if windows needs some process to run, and some processes don't effect anything. But if you're curious, you should be able to google all of startup items and see what it's related to and why you do or that you don't need.

  Good luck! Sorry, I'm everywhere with this response.

• Your computer is low on memory. Quit other programs, and try again. . NO IT's NOT... and no other prog running... player victory med doesn't work anymore...

  I get this message in box "[your computer is low on memory. Quit other programs, and try again. "] When I try to run my videos on wmplayer as ive allways done and now this..." the only recent download, I was able to isolate is silverlight, but have disabled it makes no difference, have already asked on this forum but will try again in the hope, I looked at a few sites referring to this prob, but without a bit of luck, I see is not just me at least... Let's hope that any 1 out there can be help Thank you

  Hello

  You may need to change the amount of virtual memory available:

  Change the size of virtual memory
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  CTRL SHIFT ESC to Task - tab process manager - click on the column of memory (may have to click twice)
  to see what is using all the memory that should not. Right-click on anything that uses a lot of memory
  and there might be other options like going to Services where "there" is a service associated with
  Note.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows 8 - your computer is low on memory-save and close files or restart

  Your computer is low on memory - to restore the memory for programs to work correctly, save your files and then close and restart all open programs.  Don't know what to do.  I have Windows 8.  The printer is also slow and difficult to work.  He says that the printer is offline.  Help

  just for Samsung ultrabook

  many users ultrabook Samsung had a problem with the RAM and noticed that it was related to the presence of the software named IntelliMemory... this software is preinstalled by Samsung...
  I searched in my Samsung ultrabook, but doesn't have a DIF he...
  then I started searching on google and found that IntelliMemory is a software produced by the company 'Condusiv Technolgies'...
  I went to C: / / Porgram files and subfolder found a "Condusiv Technolgies '...
  wanted the .exe inside. It is an executable named 'expresscache.exe '.
  then uninstall the expresscache and everything is back to normal...
  and my RAM could take a rest...

• Windows Media Player says * your computer is low on memory. Quit other programs, and try again

  Original title: HELP!

  Hello! When I want to watch a movie on my computer then WMP appears and says * your computer is low on memory. Quit other programs, and try again *. I deleted a lot of files and programs, so I have 13 and 39 GB on my Local drive, but it still does not work. Could someone please help? Thank YOU

  YOU

  It is not said you're low disk space, it says you're low on RAM.  We can tell you more if you tell us your system specs.

• When you try to install Vista, receive the message "this computer hardware can not supported booting from this drive." Disk 0 unallocated space.

  Original title: Disk 0 space unallocated: when I tried to install Windows Vista.

  Unallocated space of disk 0: when I tried to install Windows Vista on my laptop and the screen table "Windows Installer"down I got the important message"hardware on this computer may not support booting to this disk. Make sure that the drive controller is enabled in the computer's BIOS menu "...

  Name: Disk 0 unallocated space total size 149.0 GB free space 149.0 GB Type: (empty).
  Please tell me what to do, I'm desperate. Thank you!!!

  Hi n m,

  Boot you from the DVD to start the installation, or have you started the installation in the existing version of Windows?

  I would like to know if you want to perform a new installation or an upgrade installation.

  You can not install Windows on an unallocated partition, if you install vista on brand\fresh the new hard disk, you will need to create partitions on the hard disk.

  Method 1:  Format the partition and then try to install Windows Vista.

  Important: The applications on the computer and all data will be lost when you format (New Installation) of the partition.

  Method 2: You can follow the steps mentioned in the article below

  Error message when you try to install Windows Vista on a computer that has initialized the hard drives: "this computer's hardware can not supported booting from this drive.

  http://support.Microsoft.com/kb/925481

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• Satellite C850 displays message error "your computer is low on memory."

  Hello

  I recently bought a Satellite C850, windows 8 and with portable 4 G RAM. But I still have the error message above, even I just browse the internet. If I ignore this message and continue using, my computer shuts the program I use for Excel for example.

  Well want to can someone help?

  Thanks in advance

  Hello

  From my experience this error message should not appear on laptops that are equipped with 4 GB of RAM. Usually, this should be good enough.

  However, try to expand the size of the virtual memory.

  -Go to the control panel (Windows key + C->-> Panel, settings)
  -Icon-> advanced system settings. (left)
  -On the Advanced tab, under performance, click settings.
  -Click on the Advanced tab, and then under virtual memory, click on change.
  -Claire runs it automatically the size of pagefile for all drives check box.
  -Under drive [Volume name], click the drive that contains the paging file that you want to change.
  -Click on custom size, enter a new size in megabytes in the initial size (MB) or maximum size (MB) box, click on set and then click OK.

• Google Chrome message "this computer will stop soon receive updates of Google Chrome for Windows Vista and Windows XP.

  Is someone can you please tell me when Google Chrome will stop supporting 2007 Service Pack 2 for Windows Vista Home

  Go Mary

  I posted a substitution for Vista and XP operating systems. Please follow my instructions in this thread, or switch to Mozilla Firefox or Opera browser:

  http://www.MSFN.org/Board/topic/175099-instructions-Google-chrome-end-of-support-VistaXp/

  I always highly recommend to switch to Mozilla Firefox, Opera, or one of many other supported browsers.

  While my dose turns off the message, you will NO longer receive updates of Google Chrome.

  Given that Microsoft will support Vista at least a year, I don't understand Google dropping support early reasoning.

• Can not defragment. I get a pop up message that I am low on memory and free disk space. I use the cleaning disc, but can not run Defragmenter. I have only 2 percent of free space, and it will not defragment.

  a pop-up message tells me I have insufficient disk space and free up some disk space so I run the disc to clean and it removes some of the problems. He jumps up all 2-3 days.  I tried to defrag, but the error message says that I only have 2% of disk space and he needs 15% to defrag so it will not defragment.  The band is red when I analyze the system before defragmentation.

  a pop-up message tells me I have insufficient disk space and free up some disk space so I run the disc to clean and it removes some of the problems. He jumps up all 2-3 days.  I tried to defrag, but the error message says that I only have 2% of disk space and he needs 15% to defrag so it will not defragment.  The band is red when I analyze the system before defragmentation.

  =================================
  2% free space? You really need a larger hard drive.

  If you have programs that you do not
  be a good idea to uninstall them, and if you have a
  delete the files that are most important or
  Save on external media such as CD, DVD, Flash
  In the car, etc...
  John Inzer - MS - MVP - digital media experience