Your DNS server cannot resolve the names of Xbox Live

Similar Questions

• Client Windows 7 Professional DNS fails to resolve the name - when connectin to a Windows Server 2003

  A professional Windows 7 workstation is unable to resolve the name when connecting to a Windows Server 2003 server.

  I ran the Portqry tool and discovered a problem with the Port 53 and open this Port in the Windows Firewall on the client and Windows Server 2003.  However, it may not always resolve the name and I can't get the Windows 7 workstation to join the domain.

  Our DNS server is at the ISP, but enabled DNS on Windows Server 2003.  I can ping the IP address of the server from the Windows 7 client

  nslookup is solved using the FULL domain name.

  Any ideas on other settings, I need change and port that I need to open to allow?

  Thank you.

  To help with this problem, please go to the TechNet Windows Server forums .  They can help you better than we can in the Windows Vista forum. Boulder computer Maven
  Most Microsoft Valuable Professional

• Cannot open websites, error DNS when the ping command cannot resolve the name

  Cannot open all websites on a PC. (other computers on the network can access the sites without a problem)
  Error message is "Internet Explorer cannot display webpage."

  I can ping (internal and external) of the IP and gateway addresses.
  Ping translates:
  C:\>ping www.yahoo.com
  Ping request could not find host www.yahoo.com. Please check the name and try again.

  Nslookup translates:
  C:\>nslookup www.yahoo.com
  Can not find the name of the server for the address 192.168.0.1: non-existent domain
  Default servers are not available
  Server: unknown
  Address: 192.168.0.1

  Non-authoritative answer:
  Name: www-real.wa1.b.yahoo.com
  Address: 69.147.76.15
  Alias: www.yahoo.com, www.wa1.b.yahoo.com

  Pathping translates:
  C:\>Pathping www.yahoo.com
  Unable to resolve target system name www.yahoo.com.

  The problem occurs on a wired and wireless connection.
  Reset TCP/IP via netsh int ip reset c:\ressetlog.txt results in the following in the log file error message:

  discount Linkage\UpperBind for USB\VID_0B05 & PID_1723\5 & 2461925A & 0 & 5.  incorrect value was:
  REG_MULTI_SZ =
  SymIM

  Is there a total of 9 errors in the log similar to the one above.
  The host file has only 127.0.0.1 in there.
  Clearing the cache of the arg, flushing the DNS and do a repair on the network connection does not resolve the problem.
  Install a new network device does not resolve the problem.
  I also deleted all the antivirus software and security, including firewalls.
  The Windows Firewall is disabled.
  Boot in safe mode with Networking does not solve the problem.
  Running Winsockfix does not solve the problem.
  Internet Explorer 8 (reset web settings has been done)
  Windows XP Media Center with SP3
  Execution of the IE Diagnostics results in an error 12007 the server name or address cannot be resolved.

  Get the end of the line...

  Any other ideas?

  Thank you

  Larry

  Sorry for the late reply, but I did not have access to the MS Web site for a few months.

  I tried your suggestions, they do not work.

  The resolution is to do a repair of the operating system out of the CD.  Who cleared up the problem.

  Thank you

  Larry

• Vista fails to resolve the name of Server 2003 on a domain

  I have several computers and two servers configured as a domain.

  Server1 - Server 2008: domain controller, print server

  Server2 - Server 2003: Server terminal server, file server

  V1 - V10 - Vista desktop computers

  Recently an office has been infected with a virus. I clean with AVG Live CD and then with Avira. At the moment, it seems that the virus has disappeared completely.

  As meeting the office in question cannot resolve the name NetBIOS of Server2, but find other machines on the network very well. I placed the entries in the file hosts and lmhosts with no effect. Connection via the address IP of Server2 works well though, so it doesn't seem to be a permission problem.

  We know troubleshooting step by step for such a question?

  http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx

  They will help you in the above Server Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Teredo offline: error cannot resolve the server name

  After a game online, I found my network with internet connection problems. Troubleshooting said teredo has been disconnected and the error has been omitted to resolve the name of the server.

  Ive heard contact microsoft is the only way to fix it. Is this true?

  Teredo is not the problem because it is usually only used by some printers

  Please download this app (minitoolbox)
  Run it with 'select all' checked
  Download output to a drive or any file sharing service
  Put a link to them in your next post
  Please enter each of them in a command prompt high after you run the above and save the file

  ipconfig/flushdns

  ipconfig/registerdns

  ipconfig/release

  ipconfig / renew

  NETSH winsock reset catalog

  NETSH int ipv4 reset reset.log

  NETSH int ipv6 reset reset.log

  Output

• Angular 2 http.get () fails with "cannot resolve the host name.

  I am trying to get 2 angular (well, ionic 2 actually, but the call failure is part of the kinetic moment) to shoot some json from the web. My code works fine on iOS or Android (via Cordova), but fails on any call http.get () on 10 of BlackBerry. Initially, I had problems because I did not in the whitelist the URL I was trying to download, but after whitelisting now runs the get call, but always fails. The error message "cannot resolve the host name.

  Does anyone have an idea why angular is unable to resolve an external host name when running on BlackBerry 10?

  Never mind... my bad. I encounter this problem when running my Ionic/angular application on a simulator. For me to get always consistent on many simulators BB10 different IP addresses I've run, rather than to allow VMware Player feeding the DHCP server (because it does no reservations of IP), I run a TinyCore Linux server on the same virtual network as simulators, just so that I can use DHCP on the instance of TinyCore instead Allowing no reserves. Unfortunately, I did not complete the configuration of TinyCore properly so nothing on the virtual network becomes a valid gateway or the DNS server list to access the outside world.

  When I run my application on my Z10 physics, it works fine.

• Gettign a error "cannot display this page and your dns server can be unvaliable" while trying to access a chat site.

  * Original title: it just that chat site which gave me a HRT page cannot display so I click fix coinection problems and he gave me your dns server may be unvailiable

  This is a chat site called babblesex problems, said Sunday and its been 5 days because I can't access the website but I can access to other sites just babblesex site and it still gives me this page cannot be displayed and your dns server can be unvaliable

  This Web site indicates that babblesex is, in fact, down:

  http://www.DownForEveryoneOrJustMe.com

  http://www.DownForEveryoneOrJustMe.com/babblesex.com

  Don

• DNS server cannot be found

  Whenever I try to use my WiFi at home one I get an error code saying that my DNS server cannot be found. And I basically all done to try to get him to stop. He also says that I have limited to WiFi connection. I am so sick of this and I need to be able to use my laptop for school.

  Hello

  1 have. what troubleshooting measures you tried?
  2 are you getting this error message when you try cable?

  Method 1.
  1 connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
  2. make sure that you are in Setup-> basic configuration category.
  3. scroll down until you see "DHCP Server" - if it is disabled, select 'enable '.
  4 enable DHCP if you want, you can change the number that starts the DHCP IP setting. (This is optional)
  5. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
  6. scroll and click 'Save Settings'.

  Method 2.
  1. press Windows + R and type Control Panel in the Run dialog box.
  2. go to network and sharing Center and then click on change adapter settings.
  3. right click on the connection to the Local network and select Properties.
  4. Select Internet Protocol Version 6, and then click Properties.
  5. select Obtain DNS server automatically an address and press Ok.
  6. choose obtain an IP address automatically.
  7. repeat the steps for Internet Protocol version 4 as well.

  Also check out the link:

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-GB/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  I hope this helps. If you have any other queries/issues related to windows, write us and we will be happy to help you further.

• Outlook Express 6: could not resolve the name of the beneficiary - abandoned user command

  original title: could not resolve the name of the beneficiary - abandoned user command

  When trying to send outside of Outlook Express 6 (right click, send to or by clicking on a hyperlink email), the above message appears.

  I lived http://support.microsoft.com/kb/2398839 with nothing next set-by-step does not.
  Any idea?

  AVG is known to cause problems with OE.  One thing that must be done is to ensure that is NOT set to scan the mail.  I know that the only way in the past to avoid this problem is to uninstall AVG and then reinstall it with the email Scanner option is disabled.  I don't understand what else could be blocking, unless it is another program running in the background.  I have recently spent 6 hours trying to resolve a problem where a program installed on a computer just wouldn't work, and I tested it on another computer and it worked fine.  I turned off and installed in safemode, and he still wouldn't run on this computer.  I told my friend that computer, it is that the only thing left that I could think of to try to uninstall the anti-virus software (which will move without a name) and see if it would make a difference (I had already turned off all its services) and of course the program executed instantly as soon as the machine was gone.  So I put MSE (www.microsoft.com/security_essentials/) about it, and gave it to my friend.  The moral of this story is that the running software can interact with windows to break and sometimes the only way to identify the culprit is to get rid of all works we can imagine.

  That said, I can't really fault necessarily on dysfunction something else installed on your computer, but if you went through all the hoops and it still doesn't, which suggests a background process running blocking things.  It is in any case my point of view on this.

  Another thing.  Under this key:

  HKEY_CLASSES_ROOT\mailto

  the hull | Open | order value must indicate:

  /Mailurl:%1 "%ProgramFiles%\Outlook Express\msimn.exe".

  but it is probably already.

  Steve

• Whenever I try to connect to my internet I get 'local internet only' and when I try to repair it it says that there may be a problem with your dns server.

  problem with connecting to the internet

  whenever I try to connect to my internet I get 'local internet only' and when I try to repair it it says that there may be a problem with your dns server, I looked for a solution for centuries now, and no one can seem to help me! Please someone help me?

  Hello

  First off I'm going to assume that when you say "local internet only", you really mean "local only". Also, I'll assume you are using a router for internet connection broadband. If I am wrong, then you will have to describe the answer how you try to connect to the internet more in detail.

  First of all, your router. The indicators show that there is an internet connection? Consult the manual, which probably came on a CD with the router. Internet connection led can resemble a planet with rings or a circle with a lower-case i in the middle of it, or some other symbol. It can also have a caption saying 'internet' or 'connected '. If the router is not connected while your PC will not have access to the internet.

  Click the Start button and type "cmd" then press ENTER. In the window type (mainly black) which results in ipconfig and press to enter. Transcribe the results of the command ipconfig for a response.

  Your (wired or wireless) network card is set to automatically get an ip address? Otherwise, set it to do that and also to get information from DNS server automatically...

  • Right-click on the icon network at the bottom right of your screen, and then click Network and sharing Center
  • In network and sharing Center, click on manage the network connections (on the left)
  • Right click on 'Connect to the Local network' or 'Wireless Network Connection' depending on how you connect to the router
  • Click on select Internet Protocol Version 4 (TCP/IPv4), and then click the properties button
  • If things are not set to 'automatic', please note all numbers so that you can restore the settings if necessary
  • Make sure that "Obtain an IP address automatically" and 'DNS server automatically get an address' is selected, then click OK
  • Click on close

  If you are using a wireless connection, what happens if you try to connect to your router with an Ethernet cable?

  Please post back with your comments to the above and give more details about your configuration, i.e. router brand and model (or another material of Internet), if you connect wireless or with an Ethernet cable, etc. etc.

  Tricky

• AMT-03505: failed to resolve the name

  Team,

  I have 2 databases on a server with a database on port 1521 and the other database is on 1524.I am facing problems connecting with the database that is located on 1524.ORACLE_HOME, ORACLE_SID and path are set on the database that is on 1524.

  I have add the database of 1524 entries in both the oracle homes / / network domain.

  I was able to connect to the database very well, but when I install the enterprise Manager, it throws the below error

  [oracle@oracle-test admin] $ sqlplus / as sysdba

  
  

  SQL * more: Release 11.2.0.1.0 Production on Wednesday 17 June at 11:00:21 2015

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL >

  Em error:

  Check if the administration server WebLogic for the field of Employment and the database that hosts the repository management, are running. After checking to retry the operation. Error: null. If the problem persists, contact the Oracle Support.

  When I try to ping the database located on 1524, he returns with the error below.

  [oracle@oracle-test emagent] $ tnsping EM12C

  AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 17 June 2015 10:43:39

  Copyright (c) 1997, 2009, Oracle.  All rights reserved.

  Use settings files:

  /U01/app/Oracle/product/11.2.0/dbhome_1/network/admin/SQLNET.ora

  AMT-03505: failed to resolve the name

  Here is my listener.ora file

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = ORCLTEST)

  (ORACLE_HOME = u01/app/oracle/product/12.1.0/db_1)

  )

  )

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = EM12C)    (* My problem is with this database)

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = ORACLE - TEST.mydomain)(PORT = 1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = ORACLE - TEST.mydomain)(PORT = 1524))

  )

  )

  Here are my tnsnames.ora

  EM12C =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = ORACLE - TEST.mydomain)(PORT = 1524))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = EM12C.mydomain)

  )

  )

  Can you get it someone please let me know what I'm missing here.

  2938783 wrote:

  Stevens,

  Is there a way where I could change the port from 1524 to 1521.Please EM12C let me know.

  Thank you!

  As it was already told, databases use ports.  The listener did.  The release of "lsnrctl status" you showed us presents a listener who is ONLY listening on port 1521 and database EM12C is registered with the listener.  In addition, we know that EM12C was able to dynamically register with this listener, because his status is listed as LOAN.   A static record (in the section SID_LIST listener.ora) would show as UNKNOWN.

  So if you want to connect to EM12C via a network connection (even if the same machine) you would specify (in tnsnames) be directed to connect to the PORT = 1521.

  I don't know how you configure client connection requests in WebLogic.  It is a problem of the customer.

• Sometimes the jobs XP in workgroup cannot find the names of the other computers. No idea why?

  There are about 10 workstations XP XP3 in a working group. A computer has a network share and sometimes some workstations cannot access this network share because it cannot find the name of the computer not not because connections reached to the maximum.

  It's because of blocked by switch network ARP requests because the Working Group is big?

  Hi dragos2,

  You can read the following article that should help you to question.

  You can't see the other computers in the workgroup on the network on a Windows XP-based computer

• Your first step to resolve the destination archive full question.

  Version:11.2.0.3/Solaris 10 DB
  
  When the destination of the Archive (LOG_ARCHIVE_DEST_1) is full, what would be your first step to resolve the error archiving so that companies can continue to access the DB?

  But how we inform oracle that the location of the FRA has some free space left now.

  OVERLAP ARCHIVELOG ALL;
  REMOVE EXPIRED ARCHIVELOG ALL;

  "erases" the use of the FRA. You can query V$ FAST_RECOVERY_AREA_USAGE before and after these commands.

  Hemant K Collette

• Error: Error #2078: cannot modify the name property of a Timeline-place object.

  Error: Error #2078: cannot modify the name property of a Timeline-place object.
  to flash. display::DisplayObject / set name()
  at RonaldTest_fla::MainTimeline/frontWheelLoadComplete()

  The code that triggers this false error is the following:

  ------------------------------------------------------------------------------------------ --------------------------------------------------------

  var frontWheelLoader:Loader = new Loader();
  frontWheelLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, frontWheelLoadComplete);
  frontWheelLoader.load (new URLRequest ("FrontWheel.png"));

  function frontWheelLoadComplete(event:Event):void
  {
  var loadedImg:Bitmap = new bitmap;
  loadedImg = event.target.content;
  loadedImg.name = 'My Image loaded';          Online listening
  var kontainer:MovieClip = new MovieClip();
  kontainer.addChild (loadedImg);
  addChild (kontainer);
  }

  ------------------------------------------------------------------------------------------ --------------------------------------------------------

  Any ideas?

  Kind regards

  Ron

  The problem is that this charger adds that the information of an image loaded as an instance.

  If you want to change the name... Get the the bitmap data var BitmapData: BitmapData = Bitmap (event.target.content) .bitmapData

  and then var image: Bitmap = new Bitmap image (data); Frame.Name = "Name"

• Windows 7 cannot resolve the ip addresses of domain names

  I have a desktop computer that I built components purchased in a major computer store.  I got this system works well for several months, now.  Recently, however, I met a problem with one of the modules of memory of 2 GB.  I deleted (because it turned out to be defective) and, shortly AFTER his withdrawal, have another problem with the resolution of Internet domain name.  I have to say that I also installed my old Windows XP as an alternative OS and updated to sp3 (it is, in fact, that I use to access the internet and write this query).  As you can see, XP I have no problem with internet access or name resolution.  There are two other systems connected to the home network via wi - fi (one equipped with Windows Vista and the other a tablet PC running Windows XP Tablet Edition) and none of them have no access to the internet problem.  I ran ipconfig/release and / renew without any result.

  I did all the following: netsh winsock reset catalog
  netsh int ip reset reset.log
  netsh int ipv6 reset reset.log.
  Still no access.
  I opened regedit and went to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters and set the following registry value:
  Value name: IPEnableRouter
  Value type: REG_DWORD
  Value data: 1 (this is the only value I changed - from 0 to 1)
  I then exit regedit and reboot... still no access.  BTW: I noticed now that this entry (IPEnableRouter), nor any of its values, is no longer even exist in my registry.  I think it has something to do with my changing parameters of Cisco Linksys E1000 router to allow me access to my home network.  In addition, even if she says that I'm connected to my home network and the router, I don't see two other computers in the network, only the items that I share my desktop.
  I changed the "Preferred DNS server" to 208.67.222.222 as instructed in a possible solution I found on the web (in XP, of course) and, when it does not, changed to 208.67.220.220 instructions, but no.  Still nothing.
  I can access any Web site... IF I KNOW THE IP ADDRESS!  Unfortunately, my mind is not enough powerful or with enough RAM to remind all the IP addresses that I never go, not to mention every single IP address in the internet.
  If I had remembered to I have copied to Notepad (so I could then copy here) the results of an ipconfig/all command, but I didn't.  If this will help, let me know and I'll get it and post it.  I know that some errors I have received are 'Windows could not automatically detect the network proxy settings"and"registration of the DNS records failed.  The parameter is incorrect"and" an error occurred during the liberation interface Loopback Pseudo-Interface 1: the system cannot find the specified file. "
  Some of the results of an ipconfig/command all, I write down, such as those that came out as strange or maybe wrong.  They are as follows:
  Active IP routing: NO
  WINS proxy enabled: NO
  Host name: (empty)
  Suffix primary DNS: (empty)
  Node type: hybrid
  DNS suffix search list: News:[email protected] (Yes, I use Road Runner by Time Warner, and no, they were not able to help at all)
  Other results:
  ISATAP.KC.RR.com tunnel adapter
  State of the media: Media disconnected
  Card tunnel Teredo Tunneling Pseudo-Interface
  State of the media: Media disconnected
  Please keep in mind that all computers connected to this wireless router have no problem with access to the internet and this computer can access in Windows XP but not Windows 7.  In other words, is there anything wrong with the router and nothing wrong with the wireless network adapter.  Besides, I tried to reboot the router and even resetting (much to the chagrin of my other significant because she was not happy with not being able to access the internet until I was finally able to re - install the router)
  !).  I have also turned off my system, removed the card wireless adapter, waited for about 15 minutes, re-inserted in the PCI slot and return to market the system.  This, of course, did nothing, either.
  After the search for several days and trying various tactics and bugs as suggested all over the web, I'm at the end of my limited knowledge and patience with this problem.  Any help that will solve this problem and allow my Windows 7 to access, once again, the internet would be greatly appreciated.  As a last resort, I might have to re - install Windows 7, but I also read the posts where others have done so, but nothing helped. :(
  Thank you
  Lakusus
  The system configuration:
  Windows 7 64 bit Home Premium 32-bit of Windows XP Home Edition operating systems and in a dual-boot configuration
  Card mother ASUS M4A89GTD PRO series
  AMD Athlon (TM) II X 4 640 clocked at 3.49 GHz
  2.00 GB of RAM
  Linksys Wireless-G PCI adapt
  Graphics card XFX ATI Radeon HD 5750 card w/1 GB GDDR5 memory
  Two hard drives 1 TB SATA and a 250 GB HARD drive partitioned into a total of 10 discs
  Burner DVD HL-DT-ST DVDRAM

  In fact, I have since fixed my problem.  Believe it or not, it wasn't any major and detailed process.  It was a very simple thing that NONE of the resolutions on that I read even suggested might be the cause, so I don't even think to check it out.  Apparently, at any given time a week ago, or NAME of the COMPUTER, something erased my!  I forgot how I found this, but I think that I went to my device manager by double-clicking on the icon "Computer" and select 'Properties' and happened to notice that, under 'Settings of computer name, domain, and workgroup', the ' computer name: "and" full computer name: "fields were empty!

  SO, I clicked on 'Advanced system settings' on the left of the window properties, select the "computer name" tab (1st one at the top left of the window that has popped up) and down to "to rename this computer, click on change." I clicked on the button 'change... '. ».
  In the next window which displayed I got the name I initially chose for my desktop, clicked the button "More"... ' and 'News:[email protected]' in the ' suffix main DNS on this computer: "on the ground (as is my Internet service provider - others may be different) and ensured that the box"Change the suffix main DNS when the domain membership changes"has been checked.
  Then, I clicked OK on this window.  I then made sure that the "Working Group:" radio button was selected and typed "WORKGROUP" in the field below, then click 'OK '.
  Return to the window' system properties 'original, I clicked 'Apply' and 'OK' and then restarted my system.
  Windows 7 being loading, all of a sudden all these programs that were inactive for the past few days began to appear and load and update!  YAY! Laughing out loud
  So, the reason I went into detail about how I solved it is in case anyone else has this same problem, they can check and, if the computer name has also been deleted, follow these steps to correct the problem. Of course, you will need to contact your service provider (if other than the Road Runner by Time Warner) in order to obtain the primary DNS suffix.  I hope this will help others I do not go through the terror I lived not having access to the internet.  Aaaaarrrrggghh!  I MUST have my internet! LMAO