Your PC has faced a loop problem

Similar Questions

• "Setup is preparing your computer for first use" loop problem

  Hello, I was hoping you guys could help out me with a big problem, I ran across when trying to install Windows 7 on a desktop computer new, custom - build. I managed to successfully install my Windows 7 64-bit, it appeared, but when I try to run it, that I will meet a black screen that says "Setup is preparing your computer for first use" and it will stay there forever, I would say. I let it run all night and didn't go anywhere.

  I tried to start in safe mode, and Windows was loading files sys32, he got to "Classpnp.sys" and it froze. After a few minutes, the screen is blacked out, and I got fired the familiar screen "Setup is preparing your computer for first use.

  I bought the copy of Windows 7 nine FRY, there will be no problem with that. My HD is a (new) 240 GB PNY Optima SSD, my mobo is a (new) Z97X-SLI Gigabyte, and I have 16 GB of RAM. All these things have been recognized by my BIOS, it seems that everything is properly connected.

  I tried to install Windows 7 on a second time and exactly the same thing happened. I also tried to repair the installation to start upward, but he finds no problems. Also a check of the memory and the disk has verified without any problem. The only things I plugged are my monitor, keyboard, and mouse.

  Does anyone know of a workaround for this screen loop "first use"? Any help would be greatly appreciated.

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are Overclocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.

  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:

  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory

  sticks are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/

  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)

  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your hard drive

  Intel® drive SSD Toolbox

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Corsair SSD Toolbox:

  http://www.Corsair.com/en-us/blog/2013/may/the-Corsair-SSD-Toolbox

  Toolbox of Kingston:

  http://www.Kingston.com/us/support/technical/sandforce_ssd_toolbox.aspx

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  Support PNY: http://www.PNY.com/support/contact-us

  Samsung: http://www.samsung.com/global/business/semiconductor/minisite/SSD/global/html/about/whitepaper07.html

  Samsung Magican review:

  http://www.TweakTown.com/articles/5638/Samsung-magician-4-2-first-look-new-SSD-Toolkit-adds-rapid-mode/index.html

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  Seagate: http://www.seagate.com/support/internal-hard-drives/laptop-hard-drives/laptop-600-ssd/

  Life of the SSD: http://ssd-life.com/

  = Is installed after Windows =.

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?

  Check their support site for the latest drivers as the CD that came with the computer

  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:

  Download and install the most recent Windows 7 or 8 drivers for your card.

  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx

  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos

  or equivalent ATI.

  Prime 95:

  http://www.Mersenne.org/freesoft/

  It's a stand alone .exe file contained in an archive .zip.

  Simply choose to run the 'stress test' option for 8 hours or more.

  If your PC can pass this test, your memory and CPU

  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:

  The temperature of each core of the processor.

  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect

  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.

  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.cpuid.com/cpuz.php

  Watch the clock speed of the CPU under various conditions of loading

  (when using speed step technology Intel EIST).

  #1 Note:

  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory

  and the "SPD" tab shows the nominal speeds for each memory location that is filled.

  #2 Note:

  Compare the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.

  voltages, temperatures, fans speed.

  http://www.CPUID.com/HWMonitor.php

  Speccy:

  Advanced for your PC system information tool.

  Need to know what's inside your computer?

  No problem! Speccy will give you all the information you need.

  Note: May or may not show the motherboard manufacturing.

  Overview: https://www.piriform.com/speccy

  Free version: https://www.piriform.com/speccy/download

  Test of Stress of FurMark GPU (graphics card):

  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/

  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:

  Provides information of the car and has an option (tab scan error) to test your drive.

  http://www.hdtune.com/

  CrystalDiskInfo:

  http://CrystalMark.info/software/index-e.html

  User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/

  Monitors the State of health and the temperature. Solid State Drives brackets (value of the software).

  SpeedFan:

  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.

  It displays your drives model number and compares your drive with other discs of the same brand and model.

  Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.

  http://www.almico.com/SpeedFan.php

  GPU - Z:

  A utility light, designed for you give information about your video card and GPU.

  http://www.techpowerup.com/GPUZ/

  PC WIZARD:

  A powerful utility designed especially for detection of hardware, also analyses more.

  He is able to identify a large scale of system components and supports the latest technologies

  and standards.

  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• Window 8 - your PC has faced a problem needs to restart

  I had a light blue screen everytimes that says 'Your PC came across a problem and the need to restart'. Is there anyway I can find out what the problem on? It's boring. Help, please.

  Here is a link of my Minidump files:
  https://SkyDrive.live.com/redir?RESID=37DC912F2C1DB026! 110

  Thank you!

  The minidump files point to the mfewfpk.sys which is a Mcafee driver:

  BugCheck D1, {158, 2, 1, fffff8800200b7b3}

  WARNING: Unable to verify timestamp for mfewfpk.sys
  ERROR: Module load completed but symbols can be loaded for mfewfpk.sys
  Probably caused by: fwpkclnt.sys (c:\windows\system32\drivers\fwpkclnt! FwppInjectionStackCallout + c8)

  These accidents can have two programs of third-party antivirus/firewall real time installed, McAfee and Avast.

  I would say to uninstall McAfee and Avast and see if the errors to solve.

  Subsequently, you can reinstall McAfee or Avast, using the most recent version, or go with alternative security such as firewall and antivirus integrated Windows 8 (Windows Defender) software.

• Your message has changed to .wav problem now. Xperia Z3

  Has changed the tone of the messages in the settings meny sound and I feel that a .wav file that perhaps was wrong I don't know... However, after doing so, he did not more I could access is no longer sound settings or the settings of the phone. When I press on them the sound setting displays a message: settings has been stopped and the settings of the phone says: process com.android.phone has stopped.

  The .wav I used I found in my file via my dropbox Manager application, which means that the file was in my dropbox folders. Maybe it was messed up?

  I tried to empty the cache for multiple applications and restarted the phone several times...

  I have hade the phon for a week...

  Please, I beg you. help!

  You may need to perform a repair of software using PC Companion. The process will erase all internal memory. You might need to charge your device for about 1 to 2 hours until the device has so at least 60% battery.

  Make sure that the device is not connected to the computer or laptop and turned off (sometimes you have to press the power button / stop and volume until what the machine vibrates 3 times or on some devices, it must push the small button near the tray on the back of the camera or SIM).

  Open PC companion-> support area-> update phone software / Tablet-> repair my phone/Tablet blue highlighted. Follow the steps, do not plug your phone until you are prompted to press volume down while plugging in the USB cable. If PC companion does not start the repair process, you may need to run Windows 7 compatibility mode (in some cases XP).

• Why always show that "there is a connection to the Apple store error."? It has been a month I am facing such a problem. How can I fix? Hope you have a solution to this...

  Why always show that "there is a connection to the Apple store error."? It has been a month I am facing such a problem. How can I fix? Hope you have a solution to this...

  I don't know if this is the problem, but it is something that must be correct establish a secure connection:

  Open Date and time preferences system, Date & time tab. Make sure that it is set to automatically set the time.

  Alternatively, make sure that your date/time is correctly set to the second.

  Another thing to try is to restart your modem and router.

• Windows error has encountered a critical problem and will restart automaticlaly in one minute. Please save your work now, when you try to install Microsoft Security Essential

  Original title: pc restart continually saying met windows critical problem after installing microsoft security databases

  Had problems with windows firewall and Defender does not.  Removed protector virus blank media like this firewall did not work either. Tried the Fix 4 her.  Still would not work.  Then tried to install Microsoft Security Essentials.  Rang scan and it restarted the pc and I am now in a loop that says "Windows has encountered a critical problem and will restart automaticlaly in one minute. Please save your work now. "Then, it closed its doors, restarts and the same message appears.  A also say-connected on the internet also. Help please...

  Hello

  1. who were the fix - it, you've tried?

  2. were you able to successfully install other programs on your computer before this problem?

  3. What is the error you received when the Windows Firewall and defender did not work on your computer?

  4. you have made no changes to the computer before this problem?

  First of all, you must disable the auto reboot system error and then we can check if the problem exists in safe mode or not.

  Method 1.

  Step 1. Disable automatic reboot to avoid unwanted restarts on system failure.

  a. when your computer starts up keep press F8 on your keyboard until you get the Advanced Boot Options screen.
  b. now, use the arrow keys, select Disable automatic restart in case of system error and press ENTER.

  Step 2:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 3:

  If the computer works properly in safe mode, then you can perform a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 2:

  You can try to uninstall completely, and then re - install Microsoft Security Essentials and check.

  You can run the fix - it from the link next.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 3:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Note: All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.

  Post back with the results for you help more.

• Outlook Express 6: your server has unexpectedly ended the connection. The potential causes for this include server problems, network problems, or a long period of inactivity. Error number: 0x800ccc0f

  Original title: Windows XP and Outlook Express 6

  I have a new computer with outlook express and went through the set up instructions.  When I tried to send a test email, I got this error message:

  "Your server has terminated suddenly the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.mail.yahoo.com', server: 'pop.mail.yahoo.com', Protocol: POP3, Port: 110, secure (SSL): Yes, error number: 0x800CCC0F. »

  How can I fix this error message and have e-mail sent via Outlook?

  Hi Jeanette Logan,
   
  Here is an article that addresses this issue. Follow the steps listed in the article for this problem:
   
  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

• Windows has encountered a critical problem and will restart automatically in a minute. Please save your work not

  Original title: I have Windows Vista home basic. Whenever I try to connect to the internet I get the error "Windows has encountered a critical problem and will restart automatically in a minute. Please save your work now' and the computer restarts

  This started happening a few days ago. I tried to run the software anti-virus and 3 different registry cleaners and nothing helped. I use a mobile internet USB and when I tried to run safe mode with networking of the device was not recognized.

  Does anyone have an idea on how I can fix this?

  This is the Win32/Trojan.Shutdowner virus and rootkit causes this error. I think that it is the solution: download and burn the ISO image of kav rescue ofhttp://rescuedisk.kaspersky-labs.com/rescuedisk/updatable/kav_rescue_10.isoon CD. Make a start of full system scan from the disc that you created. Remove infections all found, including this stupid annoying rootkit, and you're done! At least it worked for me!

• Windows has encountered a critical problem and will restart automatically in a minute. Please save your work now.

  Hello world. Since I installed Windows 7 Home Premium, I had problems with an error message displayed when I start my computer. The error message said, as in the title, "Windows has encountered a critical problem and will restart automatically in a minute. Please save your work now. ». After a minute, the computer is forced to restart, it closed suddenly, without any message "Shutdown of Windows". The problem occurs very often, I want to say that it appears whenever I start my computer. I don't know what to do, it's really annoying.

  I found a microsoft forum, when someone posted an article (http://support.microsoft.com/kb/976586/) when it was said something to the topic 'how to activate her do not require account Kerberos preauthentication option", but I did not understand how to do this. If anyone can help me, please do it, each response is welcome. (Sorry my bad English, I'm still student - Romanian).

  Hi again! I managed t solve the problem myself, using Kaspersky Rescue CD 10. This is the Win32/Trojan.Shutdowner virus and rootkit causes this error. I think this is the solution to all of you who have this problem. Download and burn to a CD from the ISO image of kav rescue of http://rescuedisk.kaspersky-labs.com/rescuedisk/updatable/kav_rescue_10.iso. Make a start of full system scan from the disc that you created. Remove infections all found, including this stupid annoying rootkit, and you're done! At least it worked for me! Thanks again to all who have tried to help me!

• Error message comes up saying ' there is a problem resetting your PC has not changed. "

  Original title: reinstalling Windows

  My laptop (Dell Inspiron) comes preinstalled with Windows 8, but not working now - it runs very slowly and often takes multiple attempts to turn on. Often said 'Prepare auto repair' when I turn it on, it remains just on this message.

  It's less than 3 years old (out of warranty) so I think that it's a software problem and not material.

  I tried to do a factory reset to clear the laptop, but an error message comes up saying ' there is a problem resetting your PC has not changed. "

  I then tried to create an installation of windows on a USB media using my product key, but impossible to use my product key for retail sales.

  I am now at a loss of what to do that my laptop is pretty useless as it is.

  It's a hard drive to a failing hard drive error / failed.

  It's a DELL error code, not a Microsoft error code

  http://en.community.Dell.com/support-forums/desktop/f/3514/t/19533510

  Replace the hard drive or ask in the Dell Forums.

• SVN: #155021. You cannot update this file with the help of Dreamweaver Subversion integration because a new Subversion client application on your machine has made updates to the file Subversion meta data. For more information on this problem

  Can Hello anyone help?

  After you configure Subversion in Dreamweaver, I get this error again!

  SVN: 155021 #. You cannot update this file with the help of Dreamweaver Subversion integration because a new Subversion client application on your machine has made updates to the file Subversion meta data. For more information about this issue, see http://www.adobe.com/go/dw_svn_en.

  even after following the instructions http://www.Adobe.com/go/dw_svn_en Download the extension, python change the var in windows to say «;» C:\Python26'

  with & without quotes, with or without; before C

  command > comparability of Subversion to get the following error "the Conversion process has failed. Please make sure you have Python installed and you check Python PATH parameter'

  I managed to get all the files after the installation, I locked, unlocked and commit a file to test fact so that was all works well, the only part I'm not retrieves the latest version, this is because Subversion is 1.6.2 and dreamweaver must revert to the version 1.4.5 on local to work, the compile someone at - it an idea what to try next in order to make it work?

  Just a reminder!

  1. I configure Subversion through guidelines on http://help.Adobe.com/en_US/Dreamweaver/10.0_Using/WS80FE60AC-15F8-45a2-842E-52D29F540FED. html
  2. I managed to get the latest SVN version
  3. Lock, unlock and commit a file
  4. Installed Python in C:\Python26 change the path in windows system properties > advanced > Environment Variables > system variables > New > Python =; C:\Python26 also C:\Python26
     
  5. I also tried the same thing in the User Variables
  6. Installed the extension DW Subversion compatibility
  7. 
     Tried to run the compatibly with the command > Subversion comparability in DW
     

  Welcome any suggestion to solve this?

  Hello

  There has been a lot of problems using svn with dw, and I know many people who have stopped trying to operate correctly.

  As much as I know dw will not work with newer versions of svn (over 1.5), and even then, there are a lot of problems, a possible solution is to try subweaver (at- http://code.google.com/p/subweaver/ ), as this has solved some of the problems associated with the use of tsvn dw environment.

  PZ

• I am facing a serious problem by logging in to my hotmail account. !!

  I am facing a serious problem by logging in to my hotmail account. Even though I followed all the steps, he asked me to recover my account but still I can't access my account. Can someone help me please?

  Hello

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Error message "your account has been locked" when trying to connect
  http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• "Your session has expired"... Error with EBS R 12

  Hello
  I'm getting random "your session has expired" error. When try to loging it works but some times it will loop and gives the same error "your session has expired" and does not allow me to connect unless I close the page and open once more. It happens as well with IE and Firefox.
  Most often it happens when you click the HOME button on screen OAM
  ICX parameter are perfectly.
  
  I I hit bug 3518330 ??
  
  My EBS version: 12.0.6
  
  I need the help of forum for this problem...
  
  Thanks in advance.
  
  Smail

  You will find all the details on the error in the Apache logs?

  This worked before? If so, the changes have been made recently?

  Please see if these documents help.

  Users running intermittently in "your session has expired" when you use the database to RAC (Doc ID 1073253.1)
  You lose the current Transaction when an Oracle Applications Framework Page expires? (Doc ID 559018.1)

  Thank you
  Hussein

• I get this message on my Acer but not on my Toshiba with the same browser 28.0 on the same Web site your session has ended, please sign in again

  I have the same 28.0 browser installed on my Acer and my Toshiba. When I connect to a Web site and select an option for certain with the Acer computer I get "your session has completed, please sign in again.

  When I connect with my Toshiba Firefox it works fine.

  Clear the Cache Firefox/tools > Options > advanced > network > content caching Web: 'Clear now'
  
  and
  
  Delete Cookies Firefox/tools > Options > privacy > Cookies: "Show Cookies"
  
  If there is still a problem,
  Launch Firefox in Mode safe
  While you are in safe mode;
  
  Firefox Options > advanced > General.
  
  Find and stop using hardware acceleration.

• Icon mail frozen. IPad rebooted, but it has not solved the problem

  RRebooting iPad has not solved the problem of frozen mail icon

  RObert

  Close the mail application and force restart the iPad. No data is affected by this.

  Press the Home button twice quickly. You will see small glimpses of your applications recently used. Drag to the left to find the application you want to close. Swipe up on the preview of the application to close.

  To force the reboot your device, press and hold the sleep/wake button and the home for at least ten seconds, until you