Your PowerPoint has stopped working

Similar Questions

• Windows Media Player and Microsoft Office PowerPoint has stopped working.

  My laptop came with Vista installed. 2 weeks ago Windows media player has stopped playing video files that I receive by email. I tried to save the file to my desktop and play from there, but the same thing happens. He will play the first few seconds and then stops. In addition, Viewer PowerPoint from Microsoft office has stopped working. The error that says my anti-virus program may be the cause. I am currently using Norton Antivirus 2009.  I uninstalled Norton, but I still don't have the same error. All this happened after I downloaded and installed all the recommended Vista updates about 2 weeks ago.

  Hi anicho,
   
  Welcome to Microsoft answers community forum!

  I would like to ask a question to better understand:
   
  (a) what was the update has been installed?
  check the update to install and remove the most recent and check. Here is the link: http://www.microsoft.com/windows/downloads/windowsupdate/learn/windowsvista.mspx

  (b) what video format you are able to play on Media Player?

  You may need to do the following if you have not created a restore point

  Clean boot:
   
  This article describes how to start your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
      
  To perform a clean boot on a computer that is running Windows Vista, follow these steps.
   
  1. click on start, type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
  http://support.microsoft.com/kb/331796 . In addition, refer to the section on how to restore your computer to a Normal startup mode

  Try these steps after the clean boot and see if it works:
   
  Type command prompt in the start search box, right-click on command prompt and select run as administrator
  Type regsvr32 wmp.dll
  Press ENTER.
  There are also a few Fix it automate solutions on the Microsoft Fix It site, you might want to try:
  http://support.Microsoft.com/FixIt#tab6
   
  Alternatively, you can uninstall the Service Pack 2 (if you meant SP2 for updates) and check to see if it works
  Here is the link to uninstall: http://support.microsoft.com/kb/948537

  To download the stand-alone version of Service Pack 2 for vista follow this link: http://www.microsoft.com/downloads/details.aspx?FamilyID=a4dd31d5-f907-4406-9012-a5c3199ea2b3&displaylang=en
   
  Follow this link for more information about playing music and everything: http://www.microsoft.com/windows/windowsmedia/player/faq/playing_files.mspx
   
  And for Microsoft Office and the question from the Point of power, th e problem you posted is related to Microsoft Office and would be better suited to the Office Discussion groups. Please visit the link below to find a community that will provide the support you request.
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  I hope that this information is help!
  Let me know if it did

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Windows has stopped working

  Whenever I am busy with my computer, I get a message your windows has stopped working and stopped. It doesn't mean I don't work, but everything starts to become slower and slower. I am perfectly up to date with my updates, so don't know what to do.

  Hello

  Looks like some component stopped, and windows needs to restart. Did you check the event log again? That may indicate this problem occurs because the machine is not crashing or stopping automatically (these actions would indicate a hardware problem).

  Had you updated or installed new software before the appearance of this problem? There are clean boot steps you can follow to isolate the problem of troubleshooting here:http://support.microsoft.com/kb/929135

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Photoshop CS4 has stopped working

  I bought CS4 of staples in 2009 to about 1300 Canadian. After the year the product has stopped working. I tried to get help, but at the moment where no one helped me in the adobe community and support always force a faq and incredibly difficult to get specific answers from the company itself compared to when I guess it was in a smaller pool of market. in any case, this turn me off products Photoshop, although I always use photoshop 7, which is quite a small version. I'm not sure atm where is my version of $ CS I think that it s in stock at my place of mother when I was younger and some of my things in another province.

  My question is?

  If CS4 just something temporary, so a $1000 for a year of the value? And I can get it back?

  In no case when buy CS4 made say the license would expire I expected it has perpetual product auto. ALthoguh I've ever had response that was some time ago. It's only since I'm home in art and more technical creative art that I need a better product of photoshop that can handle my pen beyond the concepts of GIMP software free someone presented to me. SO my frustration also made me probably say a 100 more people currently on my dissatisfaction of the service adobe product I bought, because he wsa heavy cost on I student at the time.

  
  Now, I want my CS4 back. Since I got back in art.

  Money, I could careless on because I don't have a lot of it, however when something angers me I either deal so I can, if nothing is settled I just let talk about bitterly. Yes, that's the problem I have, and I don't know that if the community can actually answer this question, it would seem that the navigation of the site is more like a maze again just like the other growth companies, the speed in which they used to navigate becomes crossed with not not the KISS method. It's just another complaint, so I hope that someone can send me in the right direction.

  I guess the first thing would be to get the serial number of my product. Hmm.

  Individual license for Creative Suite like CS4 products are perpetual and expire (with very rare exceptions, that probably doesn't apply to you you bought your copy outright). If your product has stopped working after a year, there is probably a technical cause, that is indeed frustrating, but also very probably solvable. Therefore, you can reinstall if you work with the same operating system as your copy of CS4 (Windows or Mac) and your computer meets the Photoshop system requirements. Be aware that newer operating systems may be incompatible with the CS4, which is eight years old.

  You are right that to reinstall you will need your serial number. If you still have the original packaging, check the cover of drive, box or inserts. If, however, the physical media disappear into the depths of storage of your mother, you can retrieve the number under Adobe ID Code associated with your purchase if you have registered the product. Sign in to your account and check under Plans & products. If you used a different e-mail in 2009, try under that. For more information on finding your serial number, please see this help document: find the serial number of your product Adobe quickly.

  Once you have your serial number, you can reinstall CS4 disc or download: Download CS4 products. If you encounter problems with the installation or the whole upward, ask a question with precision just what you install, the specifications of your computer and any errors you receive in the forum to download, installation, commissioning . Experts specialize in types of troubleshooting, you might need.

  And finally, if this wall of text does not answer your question, please respond to this discussion, and we will do our best to point in the direction where you want to go.

• "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150

  "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150, especially when I run 3d games or install Skype 5 and start on this video than the above message appears please advise solution and oblidge. Thank you

  First of all, you're not telling the forum what version of Windows, edition and service pack level your system is running.  Please do.

  Secondly, there is no describe your system.  Tell us who makes your system and its model, if a packaged system.  If not packed, please tell us who manufactured your motherboard and model.  If your video card is another box and not originally shipped with the system, please tell us the manufacturer and model of the adapter.

  Finally and most importantly, please read 555375 Microsoft Knowledge base article, how to ask a question.

  Now, in general, unless your system has a card mother Intel®, you do not want to download an updated directly from Intel® driver.  If there is a system, you will want to download an update of the driver support from the manufacturer of your system model site.  If not packed, see web site for support of the manufacturer of the motherboard for your updated driver model.  If this isn't the case, a card mother Intel®, the reason for the not to load the Intel® GMA 3150 drivers from the web site Intel® is that there may be unhandled in the Inte® base drivers implementation changes.  Nor should download the drivers through Windows Update, except as a last resort.  If Windows Update contains an updated driver, check you motherboard of the system/website of the manufacturer for updates.  Be aware that some manufacturers/motherboard of the system (e.g. Dell) don't feel any economic incentive to keep the drivers/firmware to update if a motherboard system was abandoned.

  No member of this forum is omniscient!  Provide complete information leads directly to all the answers!

• Your wireless card has stopped working properly.

  Often, I receive this message "problem reports and solution:
  A problem with your wireless network card

  Your wireless card has stopped working properly.
  There is a network adapter that allows your computer to connect to a wireless network.
  To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

  Even if I get this message that I am able to connect to wireless internet. I checked on the DELL website, and according to them, I have the driver for my Inspiron 1520 then I would like to know how I can stop this annoying message that appear all the time? Is there an updated driver that I don't know?
  The problem refers to my Dell Wireless 1390 WLAN Mini-Card (Driver version 4.170.25.17)

  I would be grateful for any advice.
  Thanks in advance.

  Hi dtw1970,

  While I was researching online error message met that it is a known issue on dell computers and there are a few steps available in the dell Web site.

  Check the link and try the steps mentioned below.
  http://en.community.Dell.com/forums/p/19094058/19217044.aspx#19217044

  You can also try posting your query in the Dell Community, see the link below.
  http://en.community.Dell.com/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Address a problem with your LOCAL WIFI card__Your network card has stopped working properly .___To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer. __ __

  A problem with your wireless network card Your wireless card has stopped working properly. To see if an updated version of your WLAN card is available

  Hello Jeroen Ratz,

  You should visit your computer manufacturer's website to download all updates for your hardware. Never leave the windows update utility, update your hardware to your computer. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Windows has stopped working to save your system

  Everytime I use internet all of a sudden a blue screen appears with the number counting from 1 to 100 down and then restarts the system. It appears massages but I have an impossible to get it melts as quickly disappears. what I got multiple exercises, it is something like:

  Windows has stopped working to save your system; hardware and software to verify that the new installed are correctly installed; Disable caching or BIOS reprogramming...

  After a reboot, a dialog box appears with the text: windows has recovered from an unexpected shutdown. Windows will notify you if a solution is available.

  My exams are too close it please help me solve the problem.

  Thanks for helping me to solve the problem.

  I applied your suggestions, but the problem was intact. I got my system controlled by an expert and came to know that the RAM has a problem. I have replaced the RAM and now it's fine.

• What should I do if my computer Action Center message says: "your Intel Graphics Driver has stopped working twice?

  My computer message of the Action Center said: "your Intel Graphics Driver has stopped working twice?

  What should I do to solve the problem?

  Hello AletBotes
  Try to uninstall the old version of the graphics driver Intel or by reinstalling fix it. It is always best to update the drivers to the latest version you can find on the website of the manufacturer of the computer. If you have no problem with the video/graphics and if the Action Center message bothers you in any way, you can turn it off in goin to this place the Center Items\Action Panel\All Control Panel control and then in the left pane click on change Action Center settings > uncheck the required Notification or uncheck everything. Click OK. That's all.

• I have adobe CS3 installed on macbook pro, but he said that the license has stopped working... I then went to your website and he advised me to download the license recovery application, which I did, but then when I tried to run this app, it then came wi

  I have adobe CS3 installed on macbook pro, but he said that the license has stopped working... I then went to your website and he advised me to download the recovery of license application, I did, but then when I tried to run this app, it then came with the recovery of the license was not based... How can I get my CS3 works again?  Thank you, Glenn

  Hello

  Please check the help below documents depending on your operating system:

  Error: "License has stopped working". Windows

  Error "Licensing has stopped working". Mac OS

  Hope that helps!

  Kind regards

  Sheena

• I get the rror message. "Error adobe license for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contact your administrative COMPUTING

  I get this error message. "Error adobe license for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for assistance. (148: 3) "How can I fix it? When I reinstalled the software, I get a message that I have an invalid serial number.

  Hi John,.

  Could you please the version of Acrobat you are using, and also work on the operating system?

  To check the serial number of your product, you may return the following document.

  Quickly find your serial number

  If you are using windows you can see the following link for more information on the solution to the existing problem.

  https://helpx.Adobe.com/Creative-Suite/KB/error-licensing-stopped-Windows.html

  If you wish to contact Adobe support team, please visit the following link.

  http://helpx.Adobe.com/x-productkb/global/Service1.html

  Please click the blue button "Still need help" to connect with Adobe executives.

  Let us know how it goes. In case you need more assistance write us back.

  We would be happy to help you.

  Concerning

  Sukrit diallo

• My Microsoft Word has stopped working. I went to open a document in word, and he said "there is no default application specified to open the document". When I went to look up Word as my default application.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your coMy Microsoft Word has stopped working. I went to open a document in word, and he said "there is no default application specified to open the document". When I went to look up the Word as my application by default, it is not found. Excel, Powerpoint and Entourage were all there. So, I went to my office... See the word icon and then click on it. When I click on it, a question mark appears above him, and it does not open. It's as if the word has been removed from my computer. I read support a few sites that I Googled, and one said to drag the question mark on the icon and then turn it back on. When I did that, he dragged the icon with it... and when I published it, the icon is now not where. I need help restoring Word, I have no idea where he went! computer
  • What you al

  Hi chrssy07,

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to Microsoft Word and it will be better answered by a Microsoft Office Support Professional.  Please visit it Support technique Microsoft and select your product for support.

  Please let us know if this helped.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CD read - Error Message: Build with Autorun CD Studio has stopped working.

  I am running Vista and have had no problems reading CDs or DVDs.  However, I have a CD of my teacher built with Autorun, who will not play on my computer.  I tried 2 different copies without success, but the 2 same CDs play on all computers in the school and on the computers of the other students.  I have Microsoft Powerpoint and Word, that are required to read the files on the CD. When I insert the CD, I get the opening menu, but when I try to select any specific topic, I get the error "Build with Autorun CD Studio has stopped working" message.  I have downloaded and run the Microsoft FixIt! Program diagnosis/troubleshooting of Microsoft Support, but he could not find any problems.  I need this CD for upcoming classes and don't know what to do?

  Hi pinkpugsy,

  1. are you able to browse the contents of the CD using Windows Explorer?

  It looks like Autorun CD Studio program is defective. We recommend you to uninstall and reinstall the Autorun CD studio software on your computer and check the difference.

  Note: before you remove the software, make sure you have the Setup file of software with you.

  Step 1: Uninstall or change a program
  a. see Uninstall or change a program
  b. Once you have uninstalled the program, restart the computer.

  Step 2: Install the Autorun CD Studio software. Once you have installed the program, restart the computer and check the difference.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My bi-ecrans Setup has stopped working with the latest update of Windows

  My bi-ecrans Setup has stopped working since the last windows update.  The second screen is relegated to never turn on and in the part 'View' of the Control Panel, I can't change the 2nd monitor resolution of anything in addition to 480 x 640.  I installed the latest drivers for the video card and two monitors.  I have everything down, powered, entretienavec left for a few minutes and fed up, nothing.  It has been like that for a few days now.  Any advice would be very useful,

  Thank you

  Tyler

  Details:

  PC: HP Compaq 8200 Elite

  Graphics card: AMD Radeon HD 6500 Series

  First monitor: ViewSonic 2030

  Second monitor: Dell 1908FP

  All pilots are underway according to Dell, ViewSonic, AMD and Microsoft.

  Latest patches from Windows Update killed my dual Setup monitor:

  Update of security for Microsoft Office PowerPoint 2007 (KB2596764)

  A security update cumulative for the stop bits ActiveX for Windows 7 for x 64-based systems (KB2618451)

  X 64-December Windows malicious software removal tool (KB890830) 2011

  Update security for Windows 7 for x 64-based systems (KB2620712)

  Update of security for Microsoft Office PowerPoint 2007 (KB2596912)

  Update for Microsoft Office Excel 2007 (KB2596596)

  Update of security for Microsoft Office Publisher 2007 (KB2596705)

  Update of security suites for Microsoft Office 2007 (KB2596785)

  Cumulative Security Update for Internet Explorer 9 for Windows 7 for x 64-based systems (KB2618444)

  Updated for suites Microsoft Office 2007 (KB2596651)

  Update security for Windows 7 for x 64-based systems (KB2639417)

  Updated for suites Microsoft Office 2007 (KB2596789)

  Update security for Windows 7 for x 64-based systems (KB2619339)

  Update for Windows 7 for x 64-based systems (KB2633952)

  There is no update stated in your post which could have implications on your graphics card, or its driver.

  Have you installed the latest graphic driver AMD in the AMD site?

  http://sites.AMD.com/us/game/downloads/pages/radeon_win7-32.aspx

  NB this link is the 32-bit win7 driver.

• Click force has stopped working

  Hi, I'm on MacBook Pro (15-inch, mid-2015, retina), freshly updated for Sierra, force click has stopped working.

  I have checked all the options, rebooted the system, still no clear sign of what is the problem.

  Does anyone have the same problem? How to check weather force/pad touch works well?

  Any suggestions what to do?

  A pointer more, I also started to use the new keyboard to work, but my memory then click force was working well.

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.