YouTube default configurations will not get a good quality

Similar Questions

• I went to Adobe Creative cloud to install Bridge. I pressed the button download next to the bridge and my creative cloud now says "update installation...". "but the sequence is at 0% and will not get above. Please help me, thanks

  I went to Adobe Creative cloud to install Bridge. I pressed the button download next to the bridge and my creative cloud now says "update installation...". "but the sequence is at 0% and will not get above. Please help me thank you all

  Hello

  Please quit Setup and then exit the creative application of cloud.

  After that, restart the machine.

  Let us know if that helps.

  Kind regards

  Bani

• How can I add a footer to the main section that will not get push off-page?

  Generator 10.1.2.2.0
  ORACLE Server Release 10.1.0.5.0
  Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64 bit Production
  
  Hi all
  
  I want to add a footer frame in the main section of a report that will not get pushed off the page by an extensible framework above it, which can develop vertically, but will still allow the extensible framework continue on the next page (and print another foot on this page as well. I paint a blank on how to do it with anchor or frameworks encompassing etc points.

  Extend the extensible framework until the footer frame. Change the elasticity vertical expandable framework to contract or fixed. In this case, pull-out frame will be printed until the foot of the page and will then continue on the next page.

  I hope this helps.

• Windows 7 does not start; Startup Repair won't work; Know last good configuration will not work

  Windows 7 64 bit machine. Automatic Windows updates were installed during the night; has started acting strangely this afternoon.  After an attempt to re-start, got the "Windows Error Recovery" screen with the "Windows did not start. A recent message HW or SW change might be the cause".  When I try to 'Launch Startup Repair' a screen returns but just hangs.  When I try to "Start Windows normally", it brings back me to the Windows error recovery screen.  When I hit f8 for when you start to get the screen "Advanced Boot Options" and try to go into secure Mode or use the last good known Configuration option, each one brings back me to the Windows error recovery screen.

  Any ideas on how to get this resolved?  Thank you!!!

  Hello

  The problem is since it will not run the startup from the Windows 7 disc repair you then you
  need some kind of support, and the cause is likely to be material. A Dell thing you want to do
  is to restore the system back to the factory plug 'IF' possible so it would be a good idea to save the
  data before calling their (possible an another 'IF'). Try to put the hard drive in another computer
  as the 2nd disc (best method) or in an external case USB (less likely to work) and then copy
  data on removable media such as CD, DVD or other external USB drives.

  Good idea to check with the technical support Dell, their online documentation and the Dell forums where he
  perhaps others with the same problem.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  Other choices would be a real store of the computer performing the internal repairs (not the leeks and the glances at one
  Best Buy or other stores). Of course if she has any warranty Dell is the best choice, and
  can be in effect regardless of any warranty.

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Why YouTube HTML5 video will not play since I've updated to v10.0 Sierra and Safari version?

  Since I've updated for Sierra, the new Safari will not play videos from YouTube, saying: "your browser does not currently recognize the video formats available supported» I didn't have this problem before the upgrade.

  Hello

  That's just the problem of incompatibility video format, with a video converter, you can easily solve this problem. And I've been using Doremisoft easy video converter HD https://itunes.apple.com/jm/app/easy-hd-video-converter/id488066888?mt=12

  to make the conversion job and it's great. You can have trial. On the other hand, have a good day.

• Hardware configuration will not work under Windows 8

  Hello guys,.
  I'm here because I can't get the hardware configuration (v. 1.63.1.34C) working with Windows 8.
  I would like to know if there is a recent version more or a way to get the program to work.
  I can install it, yet when I open it, it just won't do a thing.
  I use a Toshiba Satellite P755.

  Thanks to anyone who can help!

  Post edited by: rfscouto

  Thanks for the last comment. All you can try right now is to use the stuff offered for the newer models, but I imagine that this will not help a lot.

  I'm afraid it takes a bit of m.

• 2nd computer on the wireless network will not get on the internet

  my computer is xp my 2nd computer is vista through the wireless receiver dlink615 and dlink. is on the network but will not go to any willing internet change workgroups the same two as said is on network and said to the internet, but where to go to get on it turns at the local level only

  Hello

  Please make sure that your services are working very well and started, has not stopped.
  1 wireless zero configuration
  2 Server
  3 workstation
  4 Netlogon
  You can find these services, start > run > type services.msc then, a window will open, check for these services if they are running, then there should be no problem with internet.
  If all services are working correctly, then give IP addresses to your PC manually according to the parameters provided by your ISP or registration of your ADSL modem.
  Hope this solve your problem...
  Thank you

• Can't reinstall Vista. Because Vista will not get to the Setup screen.

  Hi people. Got a prob a little. Vista stopped booting the other night. So, I tried safe mode, and it hung on crcdisk.sys. So, I decided to get in shape. Problem is, it will boot from the DVD, but will not load / access the Setup screen (I waited for 7-8 minutes and nothing's happened, shows just the thing with the green bar).

  Not too sure if it's because the hard drive is 1 TB (but Vista was on the same front hdd with Windows 7). I tried to remove the 2 GB of ram (I use 4). No go. Tried another DVD rom, not go. Removed USB devices that have been connected. No go. I know that the DVD itself is fine. I tried on the other PC here, the installation screen came within 2-3 minutes. But his is not a 1 to (its 250 GB) the only DVD that will work / I install is the Windows 7 DVD.  So, how can I reinstall Vista?

  I deleted all partitions / recreated with the Win7 installation as well. Still couldn't get Vista to get to the Setup screen

  Any info appreciated

  Thank you

  Finally fixed it. I read that USB legacy can also cause this. So, I disabled it. Everything is good. Managed to get to the Setup screen, then reinstall Vista

• Pavilion HPE-552SC: HPE-552SC and ASUS GTX750TI - will not get past the BIOS

  Hello.

  My installed shipped with the HPE-552SC has failed and I bought a new ASUS GForce GTX 750TI. After installing, the computer will not exceed BIOS.

  Looking at some of the messages in the support forums, solutions would be to turn off the UEFI - how ever when I press "ESC" at the start of the BIOS, I can not run the application "Run Application UEFI" - see photo below.

  

  BIOS is updated to 7.15.

  What should do?

  Best regards

  Andrée

  Hello

  The NVIDIA GTX 750TI requires a BIOS to version 8 HP with a few exceptions depending on the graphics card.  Your PC is four years, so don't expect HP to publish a version 8 BIOS.

  The NVIDIA GTX 660 or 660 TI would be a good choice.  You may need to upgrade the power supply according to the map.

• Blackberry enterprise server configuration will not accept the connection.

  Original title: remote terminal BlackBerry or resource will not accept connection

  Blackberry enterprise server configuration

  H

  1. What operating system is installed on the computer?
  2. What exactly are you trying to achieve?
  3. What is the full error message received?
  Since your post looks like this, the problem is related to the server, Blackberry enterprise server, that's why I suggest you to report the issue to the links below for assistance:
  http://social.technet.Microsoft.com/forums/en-us/ocspresenceim/thread/84884b83-b8a4-4150-b395-19c133b6254d/
  http://BTSC.webapps.BlackBerry.com/BTSC/microsites/msbrowse.do?UMBrowseSelection=SG_BLACKBERRYENTERPRISESERVER_4_1
  I hope this helps!

• Will not get my Acer iconia 7 b1-730hd past Acer logo when I try to start. Any help, it was beautiful!

  I was reading on my Tablet and started to get flashes of Google has stopped playing and different applications, then they say something about the pitcher and he quit. When I tried to revisit the logo Acer turns on and it will not go to the lock screen. I even let it go until the battery is dead and the tried and the same thing! Help! Please, I beg you! Thank you

  Try the solution:

  https://community.Acer.com/T5/Android-tablets/need-help-Acer-B1-730HD-stuck-on-USB-logo/m-p/318495

• EA6500 will not get the rental

  Small business, under 10 computers, printers Wi-wired and wireless, simple network. Don't no need (nor yours especially) Smart Wi - Fi, Cloud Connect, or or anything other than a simple router configuration manually. Have a new EA6500 I intend to use in replacing an E1000 who plays up (must be reset to zero every morning) connection to Verizon East (former GTE) aDSL. Connected the EA6500 to a laptop via ethernet, router password changed even as E100, put in place redirects it two port I need (IP addresses on the internal network are static in the 192.168.1.0/24 block), DHCP server changed to start at 101 (don't ask), leave the Type of Internet Connetion setting "Automatic Configuration - DHCP" (the same as E1000) close the two routers and modem (Westell 890-210015-04 wire speed). Connect to EA6500 for modem, turn on the modem, router, switch and...

  Nothing. Not getting any external IP address via DHCP.

  If I switch back to the E1000, it immediately picks up the lease of the IP.

  So what hurts?

  No, I can't use PPPoE (former GTE is DHCP, as I mentioned), no, I have no intention to replace a modem to work when it has nothing to do with the problem, I need to clone the MAC address.

  The solution was simple, and the problem (I suspect and implicit in my original post) was my mistake. I simply forgot to release the lease on the old router before attempting to obtain a lease on the EA6500. Tested with my home system (to avoid downtime in the shop) and the EA6500 cheerfully acquired a DHCP lease on my home DSL after I published the lease on my DD - WRT router.

  Of course, to get the EA6500 to release the lease so I could return to my router has been a nightmare, with the flaw in the firmware (more precisely, the pride of programmers) who does not have an exit without renewing. Had the time tearing the WAN cable (oh, just, Cisco calls an 'Internet' cable) on the modem shortly after hitting the 'release and renew' link - took a few tries, but eventually caught after the release, but before he could renew selfishly.

• Downloads from Amazon will not get the error C00D36B4

  Download will not play have redownloaded will not play again. Play previous download from amazon

  What the file type of these downloads (MP3, WMA, WAV...)?

  What is the full text of the error message? If you click Web help, what is the URL of the web page you need?

• Clock will not keep in good time

  Since the installation of windows 8 Pro (more pre-release) my clock will not keep accurate time. It's annoying because updates are not installed at the right time, but are delayed.

  Haven't tried other thing that check every time I turn it on and reset for this session.

  Help

  Thank you

  Mike

  Hi Dominic

  My apologies for the late reply to thank you.

  I finally got around to replace the mother board battery, there is no adverse reaction, somehow and we are now a very happy Bunny.

  Thank you very much.

  Mike

• HP Photosmart C 4680: C4680 - Test ok but the alignment page is of poor quality and can not print a good quality copy now

  After changing the black cartridge, we are not able to print a page of alignment of good quality, although the test page prints fine. We tried to align page alignment of old and of good quality, and he is still not able to print a good quality alignment page. We have tried to clean the print head, but it cleans only the first round. It is a brand new HP cartridge that is used. Do we need a new cartridge or is there something else we can do? Thank you.

  Thank you for your response. I have contact support who thought that it was a problem of breakdown of pen and I ended up having to buy a new printer.