Z3 case double

Similar Questions

• Event case double action

  Hello, I made a VI which consists of two tabbed pages. Each page has three buttons-> you measurement procedures

  At the start of the VI, always the initialization is performed. When to switch between pages, always initialization is done.

  Everything works well except: when passing between pages, the initialization is performed two times!

  How to avoid this?

  In general, the controls on the tab are a visual aid for the façade to the group as controls.  The terminal is not connected to what whether in code.

  It looks like you want a "state machine".  Search the forums and the help of LabVIEW.

  Your code is essentially internal to the outside at the moment.  You must only have a unique structure and make the outermost structure (just inside the outermost program while loop).

  In the case of event appropriate (one per action/event) use a business structure that determines which code to run in function your different measurement procedures.

• Firefox does not open in full screen on the task bar and I have to go over it to see the web page.

  Firefox does not open in full screen on the task bar and I have to go over it to see the web page.

  Firefox window is sometimes "off screen" somehow. Often, you can force it to appear on the screen by right clicking on the thumbnail image just above the taskbar and choose expand. Does it work?

  A possible cause for this is that the file that stores the positions and sizes of window is corrupt. You can delete this file and Firefox will return to standard window resizing.

  #1 method: If you can get a zoomed window:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  #2 method: If you can not get a Firefox window for all:

  Close Firefox by right clicking the icon in the taskbar > close all windows.

  Using the Run dialog box (windows key + R) or the start search bar menu type or paste the following and press Enter to drill down to the profiles folder:

  %APPDATA%\Mozilla\Firefox\Profiles
  

  Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.

  Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  Then, to re - light bars, you can use one of the following methods to view the list of the toolbar, and then select the desired bars it:

  • Right click on a place empty on the tab bar (or the button '+')
  • Press the Alt key to activate the classic menu bar > view > toolbars
  • in customize mode > show/hide toolbars (see: Customize Firefox commands, buttons, and toolbars)

  To activate the menu bar, toolbar bookmarks or other bars, click it in the list.

• Why can't I see firefox on my screen

  Whenever I open firefox, it opens in a small tab to the right of my screen. I know its open because when I alt Tab, I see it on a more small scale of my tab open in internet explore.

  Firefox window is sometimes "off screen" somehow. Often, you can force it to appear on the screen by right clicking on the thumbnail image just above the taskbar and choose expand. Does it work?

  Note: I guess that still exists in Windows 10 but have not tested.

  A possible cause for this is that the file that stores the positions and sizes of window is corrupt. You can delete this file and Firefox will return to standard window resizing.

  #1 method: If you can get a zoomed window:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  #2 method: If you can not get a Firefox window for all:

  Close Firefox by right clicking the icon in the taskbar > close all windows.

  Using the Run dialog box (windows key + R) or the start search bar menu type or paste the following and press Enter to drill down to the profiles folder:

  %APPDATA%\Mozilla\Firefox\Profiles
  

  Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.

  Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  Then, to re - light bars, you can use one of the following methods to view the list of the toolbar, and then select the desired bars it:

  • Right click on a place empty on the tab bar (or the button '+')
  • Press the Alt key to activate the classic menu bar > view > toolbars
  • in customize mode > show/hide toolbars (see: Customize Firefox commands, buttons, and toolbars)

  To activate the menu bar, toolbar bookmarks or other bars, click it in the list.

• I have two monitors and Firefox will not come on the screen.

  When I try to open Firefox it will not load on each screen. Looks like he's trying to go to the secondary screen, but is not visible. The OS is Windows 7 Home first Service Pack 1. Firefox version 37.0.1
  Thanks for your help.
  Jerry

  You get a sticker or other indication on the Windows task bar that there is a window of Firefox "somewhere", but it is not visible anywhere?

  If there is a tile (or a title of the window above the Firefox button in the task bar):

  The Firefox window sometimes opens off screen. If you have a multiple monitor configuration, make sure that both monitors are on. Other users have reported that sometimes Firefox acts strangely while the second monitor is turned off. You mentioned that both monitors are on in your case.

  In all other cases: you can often force the Firefox window is displayed on the screen by double clicking on the thumbnail image just above the taskbar and choose expand. Does it work?

  A possible cause for this is that the file that stores the positions and sizes of window is corrupt.

  #1 method: If you can get a zoomed window:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old as well.

  Launch Firefox back up again. Windows normally appear again?

  #2 method: If you can not get a Firefox window for all:

  Close Firefox by right clicking the icon in the taskbar > close all windows.

  Using the Run dialog box (windows key + R) or search from the start menu (bar (or, in Windows 8 may bar charms bar research?) type or paste the following and press ENTER to drill down to the profiles folder):

  %APPDATA%\Mozilla\Firefox\Profiles
  

  Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.

  Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old as well.

  Launch Firefox back up again. Windows normally appear again?

• Firefox does not appear (it will be 'open', although it seems that it is open in the taskbar)

  I don't know if it's a coincidence that he himself has updated to 37.0, but it must be...

  When I click the task bar on Firefox and on the desktop icon, it opens on the taskbar, when I select the taskbar it shows even Firefox loaded Google (my default Web page)... But it never occurred to the screen.

  I have:
  -Windows 8.0 (No 8.1 and I'm not on the upgrade because it works better than 8.1)
  -Noscript add-on/plugin, or more
  -the drivers up to date

  I tried:
  -Uninstall and reinstall the version the most recent (37.0)
  -Uninstall 37.0 and installation of Firefox Web site archive 36.0
  -Restart my computer after install
  -Disabling service maintenance on installation

  I "allow" - ed the windows popup install twice and it does not help.
  The first time, it tries to open, she went to the yellow background on the taskbar to open programs, you have not yet used.
  However, when I click on it nothing comes on the screen. When I select always watch here my homepage. I can't do the thing in firefox update because I can't even display. I don't get the error messages on my computer, which is weirder. I updated and ran windows defender full scan and found nothing (but it is not surprising to "defender", lol).

  Once he opens the first time, even open another page opens nothing. Then it crashes and does close, even if you right click and you try to close all the windows... I have to use the Task Manager to close at the end of task...

  I don't know how to open the 'xpi' convenience store thing, sorry...

  And no whining, but why is - it so suddenly broken XD... And more important still, how in the world I can't come back to work? I use this terrible chrome I got lucky to have right on my computer already, which I only got to see one thing a long time ago and I forgot I even had Chrome... And as much as I hate to use chrome, it is actually works perfectly for me now... Thank you for any help will be much appreciated...

  said jscher2000

  The Firefox window is sometimes "off screen" somehow. Often, you can force it to appear on the screen by right clicking on the thumbnail image just above the taskbar and choose expand. Does it work?

  A possible cause for this is that the file that stores the positions and sizes of window is corrupt.

  #1 method: If you can get a zoomed window:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old as well.

  Launch Firefox back up again. Windows normally appear again?

  #2 method: If you can not get a Firefox window for all:

  Close Firefox by right clicking the icon in the taskbar > close all windows.

  Using the Run dialog box (windows key + R) or search from the start menu (bar (or, in Windows 8 may bar charms bar research?) type or paste the following and press ENTER to drill down to the profiles folder):

  %AppData%\Mozilla\Firefox\Profiles

  Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.

  Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old as well.

  Launch Firefox back up again. Windows normally appear again?

  Thank you! Your thing 'out of scope' brought me exactly what I need! I realized it was broken because of my second monitor/TV... It wasn't "on" the TV, but because he was off it broke somehow... So, once I've restarted BOTH on, she came back to my main screen/monitor (no tv). I don't know why he did it, but he must have crashed on my main screen because the TV was turned off... Strange...

• Firefox shows upwards on the taskbar but will not maximize when clicking on window

  I tried re installation, but when I click the icon it will appear on the taskbar but will not maximize.

  It is a more detailed explanation of the above.

  Sometimes, a window is "off the screen" somehow. Often, you can force it to appear on the screen by right clicking on the thumbnail image just above the taskbar and choose expand. Does it work?

  A possible cause for this is that the file that stores the positions and sizes of window is corrupt.

  #1 method: If you can get a zoomed window:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  #2 method: If you can not get a Firefox window for all:

  Close Firefox by right clicking the icon in the taskbar > close all windows.

  Using the Run dialog box (windows key + R) or the search for the start bar menu (or Windows 8.1 may bar charms bar research?) type or paste the following and press ENTER to drill down to the profiles folder:

  %APPDATA%\Mozilla\Firefox\Profiles
  

  Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.

  Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

• Updated FireFox, restarted and now it will not open the browser, even if the icon does not appear in my taskbar. Was fine until the update last night. Win8.1 running

  When I move the mouse over the icon in the taskbar that appears after that I have I dbl-clicked on the icon on the desktop, you can see a miniature version of the browser open as usual, unfortunately, the browser will not open upward on the desktop. I've deleted and reinstalled several times. It has worked very well until I did the update last night.

  Machine features:
  8.1 to win
  16 GB of RAM
  3 video concerts
  Processor AMD FX-6200 6 3.80 Ghz
  64 bit

  Sometimes, a window is "off the screen" somehow. Often, you can force it to appear on the screen by right clicking on the thumbnail image just above the taskbar and choose expand. Does it work?

  A possible cause for this is that the file that stores the positions and sizes of window is corrupt.

  #1 method: If you can get a zoomed window:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  #2 method: If you can not get a Firefox window for all:

  Close Firefox by right clicking the icon in the taskbar > close all windows.

  Using the Run dialog box (windows key + R) or the search for the start bar menu (or perhaps 8.x for Windows search of charms bar bar?) type or paste the following and press ENTER to drill down to the profiles folder:

  %APPDATA%\Mozilla\Firefox\Profiles
  

  Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.

  Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

• Apple TV 4 distance incompatible

  Sometimes it works ok, but often it is choppy, unresponsive, then jumps abruptly to the front. Apple tv restarting does not help. Any suggestions?

  Look at the light on the ATV when you press the remote and if it flashes instantly and then the ATV is the remote commands but delayed response.  If this is the case, exclude the remote as the question.

  In this case, double click on the TV icon button and check how apps can run in the background.  By scanning up to closing each to zero are left then start the one you want.  This ensures that the ATV is not lagging behind due to too many applications running.

  Finally consider the application that you are using and it may seem slow due to network traffic.  He may be waiting to download something.

• Update is downloaded, do not re-start the computer.

  After that download of the update the computer remains frozen, it never restarts and if the pointer I can see my notifications and stickers.

  Hi Alex_enko,

  If you are unable to complete the installation of the El Capitan, here are a few things to try:

  Open the Mac App Store, click on the purchase tab and see what the status of your download.  If the download is interrupted, you can take.

  Once the download is complete, check to see if the file 'install OS X El Capitan' is in the Applications folder.  If this is the case, double-click the file to open it and run the Setup program.  This application is removed from the Applications folder once the installation is complete.

  If the installation does not complete, restart the computer using safe mode and try again.  Here are some links with information about these processes.

  Update of OS X El Capitan
  https://support.Apple.com/en-us/HT201475

  Resume interrupted iTunes Store downloads
  https://support.Apple.com/en-us/HT204312

  Try safe mode if your Mac does not end commissioning
  https://support.Apple.com/en-us/HT201262

  Take care

• Windows could not finish repairing the problem because it is impossible to perform the following action: renewing your IP address

  Last night after doing a reboot of my internet has stopped working.  I get the error indicated in the title, when I click on 'repair' under the Local area connection status window.

  I use a cable modem and going through a wireless router.  I know they work because I'm there access wireless typing to you all.

  When I type "ipconfig" in the cmd program, I get the following (which I thought was weird):

  Suffix the connection-specific DNS: cm

  IP address: 0.0.0.0

  Subnet mask: 0.0.0.0

  It was also strange to me that I could not access my router by typing 192.168.1.1 in my IE window.

  Also, why I type ipconfig/release, I get a message that says "IP address for the connection to the Local network map is already out." and when I type in ipconfig/renew, I get "an error occurred upon renewal of the connection to the Local network interface: the RPC server is unavailable."

  Just another note to add, I did a restore of the system to a point a week before I had the problem and I still have the same issues.

  I hope it is enough detail for each of you experts out there.  Thank you in advance! :)

  PS Sorry if this has already been answered, I was digging through forums for the last two hours.

  Your machine is not getting an IP address from the DHCP server.  Without an IP address, it will not communicate with any device on your network.  The error says "the RPC server is unavailable" or "the RPC service is unavailable"?  Whatever it is, make sure that your DHCP client service and your RPC service is running:

  Start-> Run-> "services.msc".

  In the window that appears, confirm that the "DHCP Client" and "RPC Remote Procedure Call ()" is present and that its status is "started" and its Startup Type is "automatic".  If this isn't the case, double-click top and doing it this way.  Also check your syslog, unusual errors:

  Start-> Run-> "eventvwr.msc".  Check the logs 'System' and 'Application '.

  Hope this helps,
  JW

• mysqli_real_escape_string() expects parameter 1 to be mysqli, null given in

  Hello world... I use Dreamweaver CC 2015 and create the registration page. I am facing error in highest title mentioned using php and mysql server side programming. The error found in function php code was generated using the server behavior in Dreamweaver CC 2015. Here's the complete code for my

  Register.php file. Y at - there someone who can help resolve the error in my folder.

  HERE IS THE CODE:

  -----------------------

  <? php require_once('Connections/user_informaion.php');? >

  <? PHP

  If (! function_exists ("GetSQLValueString")) {}

  function GetSQLValueString ($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")

  {

  If (via PHP_VERSION < 6) {}

  $theValue = get_magic_quotes_gpc()? stripslashes ($TheValue): $theValue;

  }

  $theValue = function_exists ("mysqli_real_escape_string")? mysqli_real_escape_string ($user_informaion, $theValue): mysqli_escape_string ($user_informaion, $theValue);

  Switch ($theType) {}

  case 'text ':

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "long":

  case "int":

  $theValue = ($theValue! = "")? intval ($TheValue): 'NULL ';

  break;

  case "double":

  $theValue = ($theValue! = "")? doubleVal ($TheValue): 'NULL ';

  break;

  case "date":

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "set":

  $theValue = ($theValue! = "")? $theDefinedValue: $theNotDefinedValue;

  break;

  }

  Return $theValue;

  }

  }

  $editFormAction = $_SERVER ['PHP_SELF'];

  If (isset {}

  $editFormAction. = « ? ». htmlentities($_SERVER['QUERY_STRING']);

  }

  If ((isset($_POST["MM_insert"])) & & ($_POST ["MM_insert"] == "register_form")) {}

  $insertSQL = sprintf ("INSERT INTO"user"(Fname, Lname, Email, username, password, 'Timestamp') VALUES (%s %s %s, %s, %s, %s)",

  GetSQLValueString ($_POST ["firstname"], "text").

  GetSQLValueString ($_POST ['name'], "text").

  GetSQLValueString ($_POST ['email1 "],"text").

  GetSQLValueString ($_POST ['email2'], "text").

  GetSQLValueString ($_POST ['password'], "text"));

  mysqli_select_db ($user_informaion, $database_user_informaion);

  $Result1 = mysqli_query ($insertSQL, $user_informaion) or die (mysqli_error ());

  $insertGoTo = 'login.php ';

  If (isset {}

  $insertGoTo. = (strpos ($insertGoTo, '?'))? « & » : « ? » ;

  $insertGoTo. = $_SERVER ['QUERY_STRING'];

  }

  header (sprintf ("location: %s", $insertGoTo));

  }

  If (! function_exists ("GetSQLValueString")) {}

  function GetSQLValueString ($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")

  {

  If (via PHP_VERSION < 6) {}

  $theValue = get_magic_quotes_gpc()? stripslashes ($TheValue): $theValue;

  }

  $theValue = function_exists ("mysqli_real_escape_string")? mysqli_real_escape_string ($TheValue): mysqli_escape_string ($theValue);

  Switch ($theType) {}

  case 'text ':

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "long":

  case "int":

  $theValue = ($theValue! = "")? intval ($TheValue): 'NULL ';

  break;

  case "double":

  $theValue = ($theValue! = "")? doubleVal ($TheValue): 'NULL ';

  break;

  case "date":

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "set":

  $theValue = ($theValue! = "")? $theDefinedValue: $theNotDefinedValue;

  break;

  }

  Return $theValue;

  }

  }

  mysqli_select_db ($user_informaion, $database_user_informaion);

  $query_user_request = "SELECT * FROM 'user" ";

  $user_request = mysqli_query ($user_informaion, $query_user_request) or die (mysqli_error ());

  $row_user_request = mysqli_fetch_assoc ($user_request);

  $totalRows_user_request = mysqli_num_rows ($user_request);

  ? >

  <? PHP

  Validate request to connect to this site.

  If (! isset {})

  session_start();

  }

  $loginFormAction = $_SERVER ['PHP_SELF'];

  If (isset($_GET['accesscheck'])) {}

  $_SESSION ['PrevUrl'] = $_GET ['accesscheck"];

  }

  If (isset($_POST['firstname'])) {}

  $loginUsername = $_POST ["firstname"];

  $password = $_POST ["password"];

  $MM_fldUserAuthorization = "";

  $MM_redirectLoginSuccess = 'login.php ';

  $MM_redirectLoginFailed = "accessd.php";

  $MM_redirecttoReferrer = false;

  mysqli_select_db ($user_informaion, $database_user_informaion);

  $LoginRS__query = sprintf ("SELECT Fname, password AND password FROM 'user' WHERE Fname = %s is %s",

  GetSQLValueString ($loginUsername, "text"), GetSQLValueString ($password, "text"));

  $LoginRS = mysqli_query ($LoginRS__query, $user_informaion) or die (mysqli_error ());

  $loginFoundUser = mysqli_num_rows ($LoginRS);

  If {($loginFoundUser)

  $loginStrGroup = "";

  If (via PHP_VERSION > = 5.1) {session_regenerate_id (true) ;} else {session_regenerate_id() ;}

  Declare two session variables and assign them

  $_SESSION ['MM_Username"] = $loginUsername;

  $_SESSION ["MM_UserGroup"] = $loginStrGroup;

  If (isset($_SESSION['PrevUrl']) & & false) {}

  $MM_redirectLoginSuccess = $_SESSION ["PrevUrl"];

  }

  Header ("Location:".) $MM_redirectLoginSuccess);

  }

  else {}

  Header ("Location:".) $MM_redirectLoginFailed);

  }

  }

  ? >

  <! doctype html >

  < html >

  < head >

  < meta charset = "utf-8" >

  < title > < /title > registration

  < / head >

  < body >

  Registration of < h1 > < / h1 >

  < are method = "POST" action = "<?" PHP echo $loginFormAction;? ">" name = "register_form" >

  < label > first name: < / label >

  < name of entry = "FirstName" type = "text" autofocus required = "required" >

  < label > first name: < / label >

  < name of entry = "lastname" type = "text" >

  < br / >

  < br / >

  < label > Email: < / label >

  < input name = "email1" type = "email" required = "required" >

  < label > user/E-mail name: < / label >

  < input name = "email2" type = "email" required = "required" >

  < br / >

  < br / >

  < label > password: < / label >

  < name of entry = "password" type = "password" required = "required" >

  < label > confirm password: < / label >

  < name of entry = "passwordC" type = "password" required = "required" >

  < br / >

  < br / >

  < input type = "submit" value = "Registration" >

  < / make >

  < input type = "hidden" name = "MM_insert" value = "register_form" >

  You already have an account? < a href = "login.php" > Connect < /a >

  < / body >

  < / html >

  <? PHP

  mysqli_free_result ($user_request);

  ? >

  No, this code was generated by Dreamweaver Server behavior. You used a Dreamweaver Server behavior and then just do a transaction search and replace to replace all mysql_ functions * functions of mysqli_. It won't work.

  Although improved MySQL (MySQLi) resembles the original PHP MySQL extension, it works differently. The first argument to any function mysqli_ * must be the MySQLi connection to the database. In the original MySQL extension, the connection has always been an optional argument at the end.

  If the passage of mysql_ * to mysql_ * had been so simple, Adobe would have updated the server years ago behaviors. Because everything has to be rewritten, Adobe has decided instead to leave the server behaviors. They could be rewritten at some point in the future, but there is no guarantee that they will be.

  There is no simple solution to your problem. You must learn to write your own PHP code, or you need to invest in an extension of third parties, such as those created by DMXZone or WebAssist.

  Learn how to write your own PHP code isn't difficult, but it takes time and effort. I wrote the books on PHP, and I also created a large number of PHP for lynda.com video training courses. There are many other resources out there, free and paid. Depending on what you choose, make sure that the information you are using is up-to-date. Unfortunately, there are many bad tutorials on the internet using obsolete or insecure code.

• vRO to vRA script steps

  I posted this in the forum of the vRA, but he had no answers, it may be better here anyway.

  I am trying to create relationships of property for vRA using script steps.

  Hi all

  I would be very happy to help you please. I created a vRO action, which should give a user an option of what storage policy to apply to a virtual machine at the request, depending on case is to be a site double vm or a single VM site.

  I created a group of properties with 2 defiinitions of property

  Definition 1-
  AvailabilitySelector
  Drop-down box
  Predefined values - unique Site / Multi Site

  Definition 2-
  VirtualMachine.Disk0.StorageReservationPolicy
  Label - storage strategy
  -String data type
  Show tips - drop-down list
  External values
  Done at my point of Action vRO

  vRO point action
  High Avalability in the selection of storage
  If (AvailabilitySelector)
  {
  {Switch (AvailabilitySelector)}
  case "Double Site":
  return ['3PAR CF"]
  break;
  case 'Monosite ':
  return ['3PAR NL"]
  break;
  };
  }
  else {}
  return ['availability please select'];
  };

  Now when I go to ask for catalog point I get an error:

  Failed to refresh the server system exception request form.

  I get this error when loading the page of the application, I can see the drop down menu to collector of site, but the drop down profile storage never fills.

  Here, any help would be greatly appreciated, I'm pretty stuck for the moment.

  Thank you

  Dean

  Hello Dean,

  What is the return type for the action? String? If so, your problem is that you return a single element of an array of strings, because you attached your hooks channels - which is an array in JS in addition, your vRA provides pre defined "Single Site" and "Multi Site" values, but your Action vRO is testing for the "Monosite" and "double".

  It seems that you are dealing with strings to return the incorrect object type can cause the behavior you're seeing. So, update your action to:

  // High Avalability to storage selection
  if(AvailabilitySelector)
  {
  switch(AvailabilitySelector) {
    case "Multi Site":
    return "3PAR FC"
    break;
    case "Single Site":
    return "3PAR NL"
    break;
      };
    }
  else {
  return "Please Select availability";
  };
  

• Update MySQL deprecated in AO

  Hello

  I am trying to replace MySQL with PDO, but I make a few mistakes. Could someone please help fixing the code below. The AOP code I use is commented below the MySQL. "Most of it works, but am getting into the problems of FETCH_ASSOC and FETCH_NUM I learn AOP of David Powers ' to access databases with PHP Object Oriented excellent tutorial on Lynda.com, but Sun-minds like me need a little help implementation of things.

  [code]

  <? php require_once('Connections/vtl.php');? >

  <? PHP / *? > <? php require_once('Connections/pdo_connect.php');? > <? PHP * /? >

  <? PHP

  If (! function_exists ("GetSQLValueString")) {}

  function GetSQLValueString ($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")

  {

  If (via PHP_VERSION < 6) {}

  $theValue = get_magic_quotes_gpc()? stripslashes ($TheValue): $theValue;

  }

  $theValue = function_exists ("mysql_real_escape_string")? mysql_real_escape_string ($TheValue): mysql_escape_string ($theValue);

  Switch ($theType) {}

  case 'text ':

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "long":

  case "int":

  $theValue = ($theValue! = "")? intval ($TheValue): 'NULL ';

  break;

  case "double":

  $theValue = ($theValue! = "")? doubleVal ($TheValue): 'NULL ';

  break;

  case "date":

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "set":

  $theValue = ($theValue! = "")? $theDefinedValue: $theNotDefinedValue;

  break;

  }

  Return $theValue;

  }

  }

  $ItineraryID_rsItinerary = "-1";

  If (isset($_GET['ItineraryID'])) {}

  $ItineraryID_rsItinerary = 2;

  }

  @mysql_select_db ($database_vtl, $vtl);

  $dsn = ' mysql: host = localhost; dbname = _vtl';

  $query_rsItinerary = sprintf ("" SELECT * FROM the route WHERE the itinerary.ID=%s ", GetSQLValueString ($ItineraryID_rsItinerary,"int")");

  $rsItinerary = mysql_query ($query_rsItinerary, $vtl) or die (mysql_error ());

  $query = $row_rsItinerary = "$query_rsItinerary, $db;

  $row_rsItinerary = mysql_fetch_assoc ($rsItinerary);

  $row_rsItinerary = fetch_assoc ($rsItinerary);

  $totalRows_rsItinerary = mysql_num_rows ($rsItinerary);

  $totalRows_rsItinerary = fetchNUM ($rsItinerary);

  ? >

  ..

  ..

  <? PHP

  mysql_free_result ($rsItinerary);

  ? >

  <? PHP / *? > <? PHP

  PDO_free_result ($rsItinerary);

  ? > <? PHP * /? >

  [/ code]

  Thank you

  RIP

  You seem to try to match a PDO stage with every step of your previous method. You can get this to work, it might be better to try to forget the old method and start over with the PDO function. This is because PDO is significantly different.

  but am getting into problems FETCH_ASSOC and FETCH_NUM

  You must use the syntax-oriented object, like this:

  $result = $sql-> fetch (PDO::FETCH_ASSOC);

  .. .not like this...

  $row_rsItinerary = fetch_assoc ($rsItinerary);

  
  

  However, I think that you have several questions in your code PHP PDO. Review the select query following generic basis. Note the use of a bound variable:

  $dbh is the database defined in the login script

  $sql = $dbh-> prepare ("SELECT * FROM table WHERE id =: id");

  $sql-> bindValue ("id", $id, PDO::PARAM_INT);

  try {}

  $sql-> execute() or $response ="

  THE SELECTION FAILED!

  ";

  } catch (PDOException $e exception) {echo $e ;}

  If ($response) {}

  echo $response;

  }

  $result = $sql-> fetch (PDO::FETCH_ASSOC);

  Extract ($result);

  
  

  Most of what is going on above should be obvious, except for the error handling. Construction try/catch "catches" exceptions (errors), but even if it contains an echo statement, it returns only the text of the exception ($e) If error reporting is set to verbose (for development environment). The $response variable, on the other hand, is what sees the visitor to the site, if the request fails.

  
  

  A little tip:

  Often we have a sequence of queries in our script. You can use the same variable name for the query ($sql) and ($result) recordset for each request in turn. no need to use PDO_free_result(); Your script does close the database connection when the script ends, but you can close explicitly with $dbh = NULL ($dbh as your login script).

• WARNING: Cannot modify header information - redirects with the server behaviors

  I know it's an old question, but I can't find the answer.  I get an error when you use the update of the server behavior redirects the Add record  I get the error message: warning: cannot modify header information - headers already sent by (output began to...)

  I deleted as much white space before the header() function and I still get the error.

  <? php require_once('.. / Connections/Old4thDB.php');? >

  <? PHP

  If (! function_exists ("GetSQLValueString")) {}

  function GetSQLValueString ($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")

  {

  If (via PHP_VERSION < 6) {}

  $theValue = get_magic_quotes_gpc()? stripslashes ($TheValue): $theValue;

  }

  $theValue = function_exists ("mysql_real_escape_string")? mysql_real_escape_string ($TheValue): mysql_escape_string ($theValue);

  Switch ($theType) {}

  case 'text ':

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "long":

  case "int":

  $theValue = ($theValue! = "")? intval ($TheValue): 'NULL ';

  break;

  case "double":

  $theValue = ($theValue! = "")? doubleVal ($TheValue): 'NULL ';

  break;

  case "date":

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "set":

  $theValue = ($theValue! = "")? $theDefinedValue: $theNotDefinedValue;

  break;

  }

  Return $theValue;

  }

  }

  $editFormAction = $_SERVER ['PHP_SELF'];

  If (isset {}

  $editFormAction. = « ? ». htmlentities($_SERVER['QUERY_STRING']);

  }

  If ((isset($_POST["MM_update"])) & & ($_POST ["MM_update"] == "UpdateVarietyForm")) {}

  $updateSQL = sprintf ("setting a DAY various SET varietyName = %s varietyType = %s varietyAlphaAcidGeneral = %s, varietyBetaAcidGeneral = %s, varietyOld4thAA = %s, varietyOld4thBA = %s, varietyEssenOil1 = %s, varietyEssenOil2 = %s, varietyEssenOil3 = %s, varietyEssenOil4 = %s, varietyEssenOil5 = %s, varietyEssenOil6 = %s WHERE variety_id = %s",

  GetSQLValueString ($_POST ['varietyName'], "text").

  GetSQLValueString ($_POST ['varietyType'], "text").

  GetSQLValueString ($_POST ['varietyAlphaAcidGeneral'], "text").

  GetSQLValueString ($_POST ['varietyBetaAcidGeneral'], "text").

  GetSQLValueString ($_POST ['varietyOld4thAA'], "text").

  GetSQLValueString ($_POST ['varietyOld4thBA'], "text").

  GetSQLValueString ($_POST ['varietyEssenOil1'], "text").

  GetSQLValueString ($_POST ['varietyEssenOil2'], "text").

  GetSQLValueString ($_POST ['varietyEssenOil3'], "text").

  GetSQLValueString ($_POST ['varietyEssenOil4'], "text").

  GetSQLValueString ($_POST ['varietyEssenOil5'], "text").

  GetSQLValueString ($_POST ['varietyEssenOil6'], "text").

  GetSQLValueString ($_POST ["'recordID"], "int"));

  @mysql_select_db ($database_Old4thDB, $Old4thDB);

  $Result1 = mysql_query ($updateSQL, $Old4thDB) or die (mysql_error ());

  $updateGoTo = "varieties.php";

  If (isset {}

  $updateGoTo. = (strpos ($updateGoTo, '?'))? « & » : « ? » ;

  $updateGoTo. = $_SERVER ['QUERY_STRING'];

  }

  header (sprintf ("location: %s", $updateGoTo));

  }

  @mysql_select_db ($database_Old4thDB, $Old4thDB);

  $query_rsUpdateVariety = "SELECT * FROM variety";

  $rsUpdateVariety = mysql_query ($query_rsUpdateVariety, $Old4thDB) or die (mysql_error ());

  $row_rsUpdateVariety = mysql_fetch_assoc ($rsUpdateVariety);

  $totalRows_rsUpdateVariety = mysql_num_rows ($rsUpdateVariety);

  ? >

  Am I missing other setups/configurations that could cause this?

  You forgot the most important part of the error message. "Output started at..." tells you where the production has started, guiding you to correct the error.

  The most common cause of this error is a space outside of an include file PHP tags. Most likely guilty is one or more new lines after the closing PHP tag in Old4thDB.php. Remove the closing tag PHP in this folder will be probably solved the problem.

  Another possible cause is using the BOM (byte order mark) on a PHP page. Make sure that the check box for the BOM is deselected in the Save dialog box.