Similar Questions

• Adobe Reader 5.0 with Windows 7 compatibility problem

  Adobe Reader 5.0 with Windows 7 compatibility problem

  version 5?

  use the most recent Adobe Acrobat Reader DC install for all versions

  Clear mcafee, unless you are sure you want.

• Halo 2 for Windows Vista compatibility problems?

  I have problems of execution of Halo 2 for Vista after installing it on my Windows 7 installation.  Whenever I start it, it immediately goes to "No answer" as soon as it loads.  I tried to start with the compatibility options for all versions of Vista (plain, sp1, and sp2) but nothing works.  It seems to freeze at the part where it loads in the Games for Windows Live components.  I saw elsewhere that people have problems with this and that by removing completely all Games for Windows games and executives charge then reinstall them with Halo 2 first worked.  This has not worked for me, and after some further experimentation, I decided to check if it was a hardware problem, so I did a clean install of Vista and had no problem if he started.  All my drivers are up to date, but I can't find any more away.  Any suggestions?

  My computer is an Intel Core i7 920 on an Asus P6T with 6 GB of RAM running Windows 7 Ultimate x 64 with Nvidia GTX260 graphics.

  Developer, student, professional computer

  Yes of course a lot of people have problems.

  Here a few other sites:

  http://forums.gamesforwindows.com/p/8000/74420.aspx#74420

  http://forums.gamesforwindows.com/t/8958.aspx

  http://www.modacity.NET/forums/showthread.php?22030-Windows-7-walkarounds-%28Halo-2-for-Windows-Vista%29

  You can also try a clean boot .

• IE on Windows 7 compatibility problem

  I created a cfm template that works fine on IE and Firefox on XP and Firefox on Windows 7; However there are problems with IE on Windows 7.  During an update action, I get the following error

  The "fieldname is not found in the members table.

  I do not see where I created the field names "and if I did, I guess that it is a problem in XP or Firefox on Windows 7.

  Clues on how to solve this problem?

  TIA
  

  The error

  The "fieldname is not found in the [tablename] table.

  is caused by the

  ColdFusion 9, a "name" field is a required field for the CFINPUT tag.

  Earlier versions of Windows and IE ignore the field name of the tag 'submit '. However, Windows 7 / IE does not ignore this name, and there he seeks to determine the field ' ' in the database table.

  Work around updates is to use

  Update [tablename]

  the [var1] value = #var1 #.

  [var2] = #var2 #.

  etc.

  where is = #id #.

  <.cfquery>

  The cfinsert statement to enumerate the fields populated

• Windows 8 compatibility problems (no MUSE and Quicktime .mov files)

  I'm bummed that Adobe Muse seems to be compatibile with Windows 8. I just bought a new machine with 8 on it and I'm trying to get used to. So far, it of a real disappointment and also the fact that Quicktime (and, therefore, the .mov files) are not compatible either. ANY help would be great. I can be downgraded to Windows 7 if I can't find a solution. Recommendations?

  Thank you

  Adobe Muse is compatible with the desktop version of Windows 8. Muse is not compatible with the version of RT Windows 8 tablet (ARM).

• If I switch from XP Pro tp Windows will I have program compatibility problems - as with Adobe Acrobat, Corel WordPerfect, MS Office 7, etc.

  If I update to Windows XP Pro tp will be I have compatibility problems of program - as with Adobe Acrobat Pro 8, Adobe Photoshop, Corel Word Perfect X 3, 7 of MS Office, MS Project 10, Blackberry Desktop Manager, etc..  The facility will be transparent by keeping all of my existing files / content? I need to reload any program?

  What version of Windows you are migrating towards?

  Check the compatibility of each program by accessing the Web site of the Publisher. In addition, many companies, such as Adobe, have their own forums which will give experiences of other users to use a particular version of a program on a particular version of Windows.

  If you upgrade to Windows 7 or Windows 8, you can use the compatibility of Microsoft here for a guide Center:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/Home?Language=en-US .

  (I personally prefer to check sites and forums of the manufacturer however)

• Still problems with Age of Empires III and Windows 7 compatibility

  If some how I got 3 AoE is installed on my computer yesterday and was able to play, but today I'm trying to play again and it keeps popping up the window saying that there is a compatibility issue. Can someone tell me how to solve this problem, or tell Ensemble Studios to make a patch to correct this _?

  Make sure your drivers are updated... and tell the program to run in compatibility mode.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  MCP. MCDST. LVL 80

• Neverwinter Nights Diamond windows compatibility problems

  Origianal title: Neverwinter Nights Diamond works with Vista?  If yes how to operate?  It works with Windows 7?  If so, how? Thank you

  Finally after many years and several accidents have completed Baldurs Gate II and Throne of Bhaal.  Bought Neverwinter Nights Diamond pack 2 years and finally able to load - surprised a compatibility problem does not work.  Even my Baldurs Gate II and Throne of Bhaal worked.

  Hello

  Once I was able to downloadand patch and then run the compatibility problem solver in the programs control panel

  Make older programs in this version of Windows

  I was able to get the game running in Windows 7 and Vista.

  Vista I deleted the shortcut on the desktop, as I had it already installed before finding the compatibility issue.  When I installed Windows 7 I chose not to install the shortcut - according to a thread I had followed.

  The most difficult thing to solve the problem was to find the patch. I can not even find the page it is on, but when I typed

  Installation for Win7vista NWN1 includes links patch - the right page came

  I'll try and copy and paste the link into this but do not know if it will work.  This is the file you need with never Winter Nights Diamond toget it works.

  http://files.BioWare.com/neverwinternights/updates/Windows/English/NWNEnglish1.69HotUUpdate.exe

  The forum was http://social.bioware.com/forum/1/topic/187/index/3341490/1 , although I wasn't able to get the intothat by typing.

  The patch downloaded and installed very easily.

  After you have installed the patch, I ran the "make older programs run in this version of windows" - using XP service pack 2 (Vista) and either 2 or 3 in Windows 7.

  It's located under Control Panel - programs - but I think that the classic view.

  best regards to all the help on this forum

  Wendolyn

• Problems installing of printer in the Windows XP compatibility box

  I am trying to use my printer Canon MX870 Windows XP compatibility mode. In the compatibility window is my computer has no printer, and apparently no USB ports don't either.

  When I try to print from a program that is running in compatibility mode, I get an error box that says: no printer driver is installed.

  I found an MS article that says I should choose the Windows XP desktop tools > parameters command and check the printer in the menu of the integration features. I tried and found that printer is already checked.

  I tried to install a separate printer driver compatibility window and had no luck there either. The "Add a printer" Wizard has informed me that there is no plug-and-play printer connected to the computer. When I tried to install the printer manually, I found that none of my USB ports have been listed as locations.

  My computer has eight USB ports, an RS-232 port and a parallel port. The Wizard indicates that it is three parallel ports, 4 serial ports and seven ports 'TS' appointed TS001, TS002, etc., of which the last is "inactive".

  I don't know how to make the link between these imaginary ports of Windows XP for real hardware in my computer. (If I did, I would still need to know which one to use. I know, but Windows is supposed to automatically allocate the names of devices on the USB ports that is appropriate, in view of these problems, I am not prepared to assume that it will be).

  How can I handle this? All this seems to be a mess.

  Hello

  
  To work around the problem, try the following steps if you have this driver on the XP Mode desktop file.

  a. click Start, click Control Panel , and search for printers , and then double-click Printers.
  b. now, click Add Printer.
  c. Select Add a local printer and click create a new port.
  d. Select Local Port and click Next.
  e. type in "[\\computer name\printer name]"(sans les guillemets) for the Port name and click OK. ""
  f. follow the instructions to complete the installation. During the installation, when you are prompted to choose a good driver; Click the "disk".
  g. navigate to the driver file you have on the desktop XP mode, then click OK. Now, check if the printer is correctly installed.

  You can even provide the driver through a disk file if you do not have internet access to download the file via the XP mode.

  Alternatively, you can check the link for more information below:

  
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://blogs.technet.com/b/windows_vpc/archive/2009/09/26/networking-and-using-Windows-XP-mode.aspx

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• System is giving compatibility problems when DotNet2003 is open

  I installed my version of dotnet2003 version of windows vista SP1 microsoft. When I opened the Dotnet, then it shows a message that it has compatibility problems. Pls Help. Because this operating system does not support the framework 1.1 what I have to do.

  Hello

  ·        You try to install .net Framework or Visual Studio .net 2003?

  If it's the later you are trying to install and run, it is not compatible with Windows Vista.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=69d2219f-ce82-46a5-8aec-072bd4bb955e&displaylang=en

  Link above provides the same information.

  .NET framework 1.1 is already installed for Windows Vista, you must not install it again.

  How to determine which versions and service pack of Microsoft .NET Framework levels are installed

  http://support.Microsoft.com/kb/318785/

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• zBook G1 17: zBook 17-mSata + RAID clean install problems

  Hey all,.

  Context: I have a zBook 17 G1 that I try to do a clean install of Windows 10.  I updated the system - Windows 7 Pro and 500 GB HARD drive - and added an mSata 256GB SSD and two-SSD 512 GB (in RAID0) in the bays of upgrade.  The mSata will start the service.

  Situation: I've upgraded to Windows 10 fine enough - changed the UEFI BIOS (with CSM), compatible RAID (checked CTRL-I option) and configured accordingly (RAID0) drives and no RAID for the mSATA.  I installed a legitimate copy of earn 8.1 I've had and then upgraded to Windows 10 - no problems.  Now, do a clean install of Windows 10: wipe all readers to clean all partitions and to nine.

  The problem:  The clean install is fine but then restarted I 3F0 (BootDevice not found) error.  When I go back to the BIOS, RAID option is no longer visible (only AHCI and IDE).  If I change the start of LEGACY and restart Option that I get the same error of 3FO.  Back in the BIOS, RAID return.  If I change the mode of UEFI (without CSM) I can load the operating system and restore the system running, but I lose the RAID option.  Also setting UEFI (with CSM) and RAID allows me to use the ROM Intel to set volumes (CTRL-I).  Works perfectly, to install the operating system, but the BIOS option disappears after a reboot.  I see the CTRL-I to screen on startup, can I remove or recreate RAID volumes, even install an operating system but then I get error 3F0 on reboot.

  I ran diagnostics UEFI disk - PAST.  No matter what point of view on what could be the problem?

  Note: I called on that second level of HP support and they have no idea (even less).

  OK, I found it after a conversation with the 2nd level of support HP @ and a few alterations.  There is certainly a strangeness of BIOS that passes.  My problem has been resolved by the following:

  1 reset the BIOS security and the default BIOS

  2. remove all SSD without boot except the mSata SSD - set the BIOS to boot in the native UEFI (without the CSM support)

  3 secure erase the mSata SSD boot (I had one more step in the PSID reset because the drive was encrypted)

  4 affecting BIOS RAID device settings (the option is available and has remained in place)

  5. installation windows 10 - clean and brand spanking again and update all drivers, including Intel RST

  6. Once installation has been good to go, added the two SSD - rebooted twice and ensured that I saw them in RST / Device Manager

  7. created my RAID 0 array using Intel RST - now I'm good to go

  I guess to try to set up raid with UEFI (with the CSM support) was my problem.  It all works now.  Hope this helps anyone who is facing the same issue in the future.

• Windows MovieMaker or Windows DVD maker problems

  I did a film with clips in MM and all is well. However, when I publish on DVD, it save the project and opens in the creation of DVD. It starts encoding, gets to 2.5% and stays there forever (overnight).

  If I try to publish the movie on the computer, it goes to the screen 'Édition Movie' and never moves from 0%.

  I literally spent about 20 hours. try to make a film of 40 min. of school my son concert.

  Should I forget MS product and buy software that works?

  Hi c1tobor,

  This issue could be due to present video filters on the computer.

  I suggest you try the following steps:

  Step 1: Disable filters in windows movie maker:

  Director of open windows

  1. click on Toolsand then click Options.

  2. click on the compatibility tab.

  3. to turn off a filter, clear the check box next to the name of the video filter.

  Now check if the problem is resolved.

  Video-filters-in-Windows-Movie-Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/video-filters-in-Windows-Movie-Maker-frequently-asked-questions

  Step 2: Choose a low quality or file SETTING when you publish your movie. For more information, see the movie settings: frequently asked questions.

  For more information, see the following links:

  Solve problems with publishing a movie to your computer
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Solve problems with publishing a movie to a recordable CD
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-a-recordable-CD

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• nvidia Geforce g105m for windows 10 compatibility issue

  I have the nvidia Geforce g105m compatibility problem to run windows 10, someone even issue

  PC: HP pavilion DM3

  Not compatible video card.

  Uninstall video card adapter. Press Windows key + R Type: devmgmt.msc Expand: graphics cards Right-click listed adapter to display Click on Uninstall Start the installation. The installation completed successfully, install the latest updates of device driver through Windows Update or the manufacturer's Web site using compatibilut mode if necessary. To learn more: How to: install and update drivers in Windows 10

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Microsoft had a band, probably not my music a little... In any case, it is the second shortcut of Microsoft which is supposed to take me to the "Windows 7 Compatibility Center.

  I won't be here but Microsoft seems very happy sending me on the prosecution of the wild goose, and here I landed! I didn't even know that Microsoft had a band, probably not my music a little... In any case, it is the second shortcut of Microsoft which is supposed to take me to the "Windows 7 Compatibility Center. The first, in the Windows help sent me to http://windows.microsoft.com/en-us/windows/support#1TC=windows-7. Not a mention of the word "compatibility" on the page anywhere. Then, enter 'compatibility' in the search for support and here is the result, looks promising. https://www.microsoft.com/en-us/search/result.aspx?q=compatibility. But no, I click on the first result that says Microsoft compatibility Center. Even what seems to be the correct web address, microsoft.com /compatibility and it takes me here http://www.microsoft.com/microsoft-band/en-us/support/hardware/microsoft-band-system-requirements. I give up!

  Hi André,.

  Please keep us updated.

  Unfortunately, the center of compatibility Windows has actually retired. To find out if any program that works with Windows 10 or not, you can check with the developer to program on the compatibility of its operating system. In addition, when you migrate to Windows 10 from a previous version of Windows, you are informed about programs that may not work with Windows 10. However, you can try to install these programs in compatibility mode and check.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Windows 7 Compatibility Mode behavior

  I am reproducing this issue I posted earlier, at superuser.com without getting any response. I need to know the answer to this question; more and more of my users have this problem.

  http://superuser.com/questions/743064/Windows-7s-compatibility-mode-behavior

  Review the settings of Mode of Application compatibility for a typical Windows program:

  

  The question is: what exactly will happen to the environment (in particular, access to C:\ProgramData) provided by Windows in the program where the only change is to set properties for compatibility with WinXP SP3, as follows:

  

  The background:

  An application that has been updated during the golden age of Windows XP gives us some problems now. Specifically, it is optimized to use a .NET library to write files in a subdirectory in the %ALLUSERSPROFILE% area (on Windows 7, this is generally C:\ProgramData ) which are essential to the license of the application. The files themselves are plain text files.

  These text files are created and written to using a much newer and separate program .NET that works without problems, write the files to the right place. But then the old program does not read the files correctly; We have not been able to determine exactly what is happening.

  Many users find that setting compatibility mode allows the system to function properly. I need to better understand that much.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home