ZBook 14: Recovery USB without HP Recovery Media Creator

Similar Questions

• Recovery media creator does not recognize the USB 32 GB on Satellite L750?

  I hope that there is someone here who can help you:

  My computer is a computer L750 x 64 based Satellite and the problem is that the sound disappears after a few seconds, when I hear the music from Youtube.

  I read in the preinstalled usermanual can I restore the computer pressing F8 when the computer starts, but it does not work.

  The continuous computer just on Windows 7.
  Now I want to restore the computer to the factory standard and will therefore use the Recovery Media Creator but it does not work.

  I want to save data on a 32 GB USB key, but it will not recognize the stick.
  I know that 32 GB is without error, because I can easily store / retrieve data either with FAT and NTFS systems.

  What I am doing wrong and is there anyone who has a good idea, so I can spend?
  best regards Erik

  Even if your USB is working correctly outside of the recovery media creator, this does not mean that it should be handled properly by this tool.

  I had problems creating recovery DVDs even though I was able to burn video files on the same disk.
  As far as I know you must take at least 16GB USB flash memory stick
  Usually, this should work.

  But I m wondering why you are not able to use HARD drive recovery option. Have you changed anything on the HARD drive?

• NB200 - Recovery Media Creator and drive HARD USB

  I just bought a white NB200 and noticed that it does not come with a DVD of Windows 7 in case I ever need to install.
  I was informed by the seller in the store I could save a copy on a USB key using a recovery disc writing.
  I assume that "Recovery Media Creator" is the best way to do it.

  I booted up and it said that it will be 6.7 GB. I don't have a USB this size, but have a portable hard drive (250 gb) with 120 GB to spare.
  Even though I can view the drive in Windows Explorer / workstation, the program of recovery media says ' Please insert a USB drive with greater than 6.7 GB memory ', whenever I click on the create"" button.

  If anyone can help?

  Hello

  I doubt that you can use the USB HDD to create a recovery disk image.
  The Toshiba recovery disc creator has been designed in order to create a bootable recovery disk!
  It has not been designed for sure the image of Toshiba on the HARD drive!

  So if you want to use the Toshiba recovery disc creator then you must buy a USB CD/DVD drive that can burn the recovery image on a DVD

• Recovery Media Creator and USB

  I try to use "Recovery Media Creator' loading on a 16Gig USB drive.
  The program insert me a greater than 12 Gig USB flash drive ask what I do.

  He said while the drive will be formatted and then comes up with "Format Failed (Error Code: 040E49-04-00000000)" and the USB key becomes illegible. Using disk of Windows & tool management I can then format the drive and use it becomes usable with the exception of "Recovery Media Creator".

  I formatted in FAT32, NTFS and exFAT, but none does.
  I tried two USB flash drives, both the same behavior.

  As far as I know, there are no partitions on the disk and I used successfully "Recovery Media Creator" on one of the disks in the past. I want the files to restore another computer, something I've done successfully before.

  I can burn data using DVD but the DVD did not work so I want to try the USBs. I have read some threads in this direction but have not found the answers to date. I'm sure that there is a simple explanation but I'm not.

  Usually, the creation of recovery using the USB flash key support should work fine.

  I read in some other threads that the preinstalled anti-virus software could cause similar problems... so I recommend you to disable the antivirus and other security software... so this should work

  Other guy says that delete the partition entirely and create a new simple volume would also work.

• Satellite L855 - 12 X: how to use BD - RE with TOSHIBA Recovery Media Creator

  Hi all

  My question is about the progress of the Recovery Media Creator.
  I was about to create the recovery and I noticed that there are several options (DVD 4.7 GB, DVD 8.5 GB and Flash memory).

  My Toshiba Satellite L855 - 12 X with a Blu - ray burner disc drive and I would use a BD - RE, I bought for backups.

  Does anyone have a solution to use this media?

  I guess that Blu - ray discs are not supported by Recovery Media Creator.
  As you said: the 4.7 GB DVD, the 8.5 GB DVD and USB Flash memory stick options are available.

  I think the 16 GB USB flash memory stick would be the best choice

• Recovery Media Creator does not create system recovery discs

  Recently purchased Toshiba Satellite C660-21Z and tried to create recovery discs, as recommended. Recovery media creator fails systematically on disk #1 and #2 with error messages when posting:

  Failed to read E:\sources\boot.wim (error Code 020150-20-00000000).

  Have tried different types of DVDs without success. Anyone able to help?

  Hello

  Check it please THIS thread and I hope you find the solution to this.

  Good luck

• Re: Toshiba Recovery Media Creator - no HDD Recovery area

  Hi friends, I bought a new Toshiba Kirabook PSU8SA-00V00U, a few months ago. I wanted to create emergency recovery disks, but whenever I start Toshiba Recovery Media Creator, it comes with a message that HARD drive recovery area undetected.

  Then I tried running the recovery environment by pressing 0 at the beginning upward.
  It comes with a blue screen saying that can not load from the recovery partition.

  I checked with Paragon Hard Disk Partition Manager software that the recovery drive is available.

  How do I make a recovery media or connect this HDD in system recovery so that Toshiba Recovery Media Creator detects the recovery disk and made recovery media. If in the future, if I want to reset the PC to factory settings, it will be even coming up with a blue screen saying that it can not load the recovery environment.

  Any help will be appreciated!

  Hello

  Fact is that the installation of image recovery or recovery media creation works if the machine has only factory settings. In other words, everything must be in original condition without any changes. With the changes I mean, original OS must be installed and the structure of the partitions of HARD drive should not be changed.

  If you try to change HARD drive partitions original structure the system in general, or Toshiba recovery media creator, will be confused and will not be able to find what we call markers which provide information on the exact location on the HARD disk where the recovery image is placed or registered.

  Did you do something that might be responsible for this situation?

• Problem of C50-A-19 t satellite with TOSHIBA Recovery Media Creator

  When I try to do recovery dvd with TOSHIBA Recovery Media Creator burning fails.

  I have the Satellite C50-A-19 t with TSSTcorpCDDVDW_SU-208DB_T cd/dvd-rw unit.

  During combustion process, I get an error saying it is impossible read the file D:\ZZImages\ZZImages\install29.swm (file .swm in error change with different attempts).

  I selected the option to verify the dvd after burning.

  I tried several times: I try to make one dvd (requires 3 DVDs for a full recovery).
  I try 2 times with verbatim dvd + are trying the fist failed, the second succeeded with the same kind of support.
  I try to numb DVDs. 2. for two times with dvd - r and dvd + r support and it has not yet.

  On the windows error reporting, I find this error:

  and this alert:

  + Updated Firmware ODD problems with Toshiba Recovery CD Creator +.

  I see this solution to update firmware for different models of units of cd/dvd-rw

  http://APS2.toshiba-tro.de/KB0/TSB9C02RP0000R01.htm

  but not on the model I have.

  I have:

  TOSHIBA Recovery Media Creator version: 3.1.02.55065006
  Windows 8.1 x 64.

  Is there a solution?
  is a known problem?

  Thank you

  Elena

  > I don't have a free USB key to test the usb mode.
  I recommend you to buy a separate USB memory key and to create the eventual recovery USB flash memory support.

  Please also check this other procedure described in this HowTO from Toshiba
  [How to create a recovery media USB flash drive to the valorisation of the ISO images - or (DVD) discs | http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm]

  Comments are greatly appreciated

• Question about Recovery Media Creator

  Hello everyone, first of all, I don't know if this should be in this category, but I thought it would be best to post in.

  My question is about the progress of the Recovery Media Creator. I was about to create the recovery DVD and I noticed that there are several support options for recovery (Recovery Media recovery media 3 1).

  My question is, what are the differences between them? No matter if I only check one of them, so I need less DVD or smaller USB?

  Thanks in advance.

  PS Excuse my grammar or bad explanation if there is no error.

  Hello

  As much as I know there is no difference between the to 3 1 recovery media recovery media.
  This info shows you ONLY the quantity of disks required.
  If you create a recovery using a DVD media, you might have more than one DVD disc.
  In case you create USB recovery media, you won't have many different memory USB flash keys.

• Re: Satellite Pro L - error using the recovery media creator

  Try to copy in memory USB, using Recovery Media Creator, original image from the Pc; just in case of future problems, I get this message: error 040 EAE-02-000000000.
  No idea what this means?.

  Thank you

  Hello

  Have you tried another USB key? The stick is probably defective, so the recovery media can t create successfully.

  Also format the stick before using the recovery media creator.

• Alternative method of Recovery Media Creator

  I just bought a z830. Is there a way to create the recovery disks with other software that the creator of media provided "recovery"? Apparently 'Recovery media creator' only works with DVD or a USB drive, which I did not. I would like to have the picture of the matter of recovery on my external hard drive and burn it to disk in the event of need.

  If I create an image of the partition recovery with another software, say Adonis True Image, this can be used to set the laptop to factory settings?

  > I just bought a z830. Is there a way to create the recovery disks with other software that the creator of media provided "recovery"?
  If you want to create the recovery disk that contains the recovery image Toshiba that the answer is no.
  > Apparently 'Recovery media creator' only works with DVD or a USB drive, which I did not.
  And where is the problem? If you have the money to buy the laptop for 1000 Euro I assume you will have 15 Euros to buy the 8 GB or 16 GB USB key and create recovery media.
  > I would like to have the picture of the matter of recovery on my external hard drive and burn it to disk in the event of need.
  Unfortunately, this won't work. You can copy the external HARD drive recovery image, but you won't have access to it when you want to start the HDD recovery procedure.
  > If I create an image of the partition recovery with another software, say Adonis True Image, this can be used to set the laptop to factory settings?
  I don t think so. Toshiba has designed own procedure how to avoid illegal use or modification of recovery images.

• Recovery media creator no go

  At the beginning of the Recovery Media Creator me bothered to back up these 'modest' 14 (FOURTEEN Go! ), but I didn't or a USB key, or a 100 spindle parts CD and an hour at hand. (Well, I know it should support up to 3 DVDs, but I remember the time when I got to 40 to 50 disks 3.5 "or later the same amount of CD.) )

  Now that I got the beginning of won´t TF app stick longer. Attempted to assign the original drive letters,... nothing helps.

  As I wouldn confidence in a set of 3 DVD-r anyway I reluctantly ordered the DVD for $ 35. (!!!!!!!)

  Yet, I would like to know how to get this race.
  THX
  G.

  I don t want to write history here.
  In my opinion, you should install OS using HARD drive recovery options. With the factory settings, you will be able to use Toshiba recovery media creator. Create recovery discs using DVD-R virgins and the problem will be solved.

  It would be more comfortable using external HARD disk but it doesn t work.

• Impossible to uninstall Toshiba Recovery Media Creator

  Hello

  I can't seem to uninstall Recovery Media Creator every time I try to uninstall I seem to get a red x error message with the error code (-5005: 0 x 80070002),.

  I think that this has been caused by the system restore, it can removed a file in the folder of the Trusted Installer, I tried literally everything I know but can't seem to remove it.

  I got my recovery so I tried to remove it because of that and bothers me like when I can't remove a program, I have no idea how to manually remove programs but I have a little knowledge with systems operating so if theres any advice on that would be great.

  Kind regards
  Kaya90

  Visit the Toshiba download page, download and reinstall Toshiba Recovery Media Creator. I hope this will solve your problem and then do what you will be able to remove it.

• No recovery Partition - question Recovery Media Creator

  Somehow, I don't have a recovery partition on my hard drive but have Toshiba Media creator on my desk?

  Images below:

  No recovery Partition? :

  + The message was edited: no labour relations have been removed.

  Hello

  It seems that the recovery media creator software is always installed, but the HARD drive recovery partition has been deleted from the HARD drive.

  This is why the recovery media creator can't access the HARD drive recovery partition.

  What to say. In this case, you will not be able to create the recovery media :(

  But you can order this disc from here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Reinstall upgrade WIN8 on Satellite L870 - Toshiba Recovery Media Creator

  Hello

  I did the upgrade from WIN 8 on a laptop Toshiba L870-156. The upgrade is OK, but I have no more creative media recovery Toshiba, as the upgrade procedure, said he should be desinstalled before upgrading and reinstalled after the upgrade.

  I have a big problem: where can I find a Toshiba Recovery Media Creator to reinstall?

  In advance thank you.

  Hello

  The Toshiba Recovery Media Creator can be used only with a system pre-installed (in your case of Win 7).
  The recovery media Creator allows you to create pre-installed image recovery disc.

• Recovery Media Creator does not work.

  My recovery media creator does not work. Its shows that 'no disk HARD recovery area '.
  What to do to achieve a recovery of HARD drive space?

  The message on the screen says: no HDD Recovery area

  This means that the recovery media creator software is unable to find image files stored on the HARD drive recovery partition.
  Why?
  There are different reasons for this...

  One of the reasons could be the missing HARD drive recovery partition or files (image files) have been deleted...