Zero wireless breaks down after standby using project Wireless N on Latitude D830 with Windows XP

Similar Questions

• Windows Update runs continuously after the installation/purchase program for Dell Latitude E6530 with Windows 7 Pro 64-bit

  Hello

  I bought a Dell Latitude E6530 'renovated', that was the end of the lease. (It was not defective). I started up and installed Dell help. I have had no trouble to do a few minor update of drivers. However, when I try to update Windows it just runs and.

  I checked the Windows Update with the troubleshooting Diagnostic Utility. I made sure that there is no infection or rootkits on your computer. I followed several suggestions I found the title of Microsoft Support positions and renamed the folder of Distribution system, as well as a few things of the reset. I have register/authenticate online with Microsoft Windows software.

  When I run the troubleshooter, it says registration for the Service is missing or damaged, and he said it suits him, but he can't solve "problems installation of recent updates. However, when I run it again, it is said that he correct once again.

  Any suggestions?

  Melissa

  Check this thread - it helped a lot of us:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-solution/f39a65fa-9d10-42E7-9bc0-7f5096b36d0c

  Kimmo

• Can I use a Canon Power Shot SX210-IS with Windows 8?

  Can I use a Canon Power Shot SX210-IS with Windows 8? The software is compatible, or y at - it update?

  Hello mtjs13,

  You would be able to use the camera PowerShot SX210 IS with Windows 8.  We have a directory of software on our web site that includes a set of updates for Windows 8.  You can access them through this web link.

• How to use the scanner Canon of my computer with Windows Vista?

  How to use the Canon Scanner of my Toshiba with Windows Vista computer? Need help, tq.

  How to use the Canon Scanner

  http://www.ehow.com/how_5796443_use-Canon-flatbed-scanner.html

  I would propose Canon Support and the knowledge base for information and manuals

  http://www.USA.Canon.com/Cusa/consumer/standard_display/support

• D Link Wireless Adapter does not work with Windows 7

  I looked in the Windows Compatibility Center and it says my D-Link WUA-2340 wireless adapter is compatible with Windows 7. Our newest computer can see my wireless network, but does not connect. Worked fine with Vista. Then it is compatible or not? I downloaded the latest drivers from the D-Link's Web site, this version is one year old. Support D-link told me that it is not compatible with Win 7. They say that it is not. MS says it's. It does not connect. Anyone know what is happening? I do not have to buy a new adapter.

  Hi Mike,.

  Welcome to the Microsoft Answers site!

  D Link WUA-2340 is compatible with Windows 7, but you will need to download the software of your product from the link below. Select the appropriate Version of the operating system before you download.

  http://tinyurl.com/ykghke4

  You can also try to change the settings of the firewall at various levels and check if that helps.

  1. Open Windows Firewall click on the Start button and then click Control Panel.
  2. In the search box, type firewall, and then click Windows Firewall.

  For more details on the settings of the firewall, follow the link

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• U430 Touch: Wireless not working only not with windows 7

  My friend bought a U430 Touch with Windows 8. He hated Win 8 so I helped him downgrade to Windows 7. Now the work of dowsn t wireless. Ethernet works very well and we are able to get on the internet, but Wireless does not work. I been to Lenovo website and downloaded the drivers from their site of support, but nothing weems to work. Is there a special driver I'm missing?

  Too bad. Just worked on it. Downloaded the drivers for Win 8 WLAN and that fixed it.

• Error while trying to run a visual Basic (.vbp) project in Visual Basic 6.0 with Windows 7 (64-bit) Enterprise saying "error access to registry system.

  Hi guys,.

  In my last computer the VB6 project worked with Windows XP but now I changed to Windows 7 and I can't run some application in visual Basic 6.0 that I still...    (I'm meaning to open the .vbp file to run in the environment of VB6 and not talking is not running the .exe).

  When I open the .vbp (from Visual Studio Enterprise 6.0), then comes an error saying "The system registry access error" only on this Windows 7 (64 bit)...

  I can not changes made in VB6 or compile programs is it my Windows 7?   There must be a solution that I think... something to execute or modify.

  By the Way this is my first post on Microsoft Answers and hope to get lucky on that first and solve my problem; (O)

  Thanks for any information

  M.

  Hello

  1 are logged as administrator?

  2. is it works much earlier?

  Method 1: Try to "Run as Administrator". VB6 needs to access the registry, and user account control sometimes gets in the way.

  Method 2:

  You can check the following link and check if it solves the problem:

  PRB: Error access to the system registry ' Message When displaying VB/VBA references.

  http://support.Microsoft.com/kb/269383

  Method 3:

  As you may have run the program under Windows XP, you can try to run it in compatibility mode and check if this solves the problem. See the following link for more information.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows.

  For additional help with this specific technology, please ask your question to the MSDN Visual Basic Forums.

  http://social.msdn.Microsoft.com/forums/en-us/vbgeneral/threads

  I hope this helps.

• Satellite L40 breaks down after 5-10 minutes and will not return

  I hope someone can help

  I have a toshiba Satellite L40. It has not been used for a while, but I need to have stuff on it.
  Put it on yesterday and then crashed after 10 minutes and would not go back
  .the same thing happened today.

  I took out the battery and tried just to power / and vice versa, but no joy.
  I'm not very technical was so had no idea what to try next.

  Hello

  If I understand your question, the unit stopped automatically.
  Such judgment may be related to high temperatures inside the laptop.

  L40 series is a bit old and probably the cooling vents and grilles are obstructed by dust.
  Try to remove the dust using a jet of compressed air. Generally, this lets get removed dust and it helps to keep the temperature low.

  Of course, this procedure would only if the problem is related to high temperatures.
  In the case of the laptop shuts down for other reasons, this workaround would be useless

  You said you need to get something from him in this case you could remove the internal HARD disk and could connect to another laptop computer through SATA to USB controller.

• MacBook Pro 9.2 breaks down after 2 years

  Hello

  I bought a Macbook Pro (13-inch, mid 2012) 9.2 on June 6, 2014. After almost two years, he froze one night. After restart, it showed a gray/white screen with an exclamation mark in a folder. After a visit to the store where I bought and a diagnosis of HARD drive, it appeared that the HARD drive was broken. So far so good.

  I replaced the HARD drive, but the problem persisted.

  That's how the problem was revealed: I managed to launch several times and it worked like a charm for several hours, then again: freeze (spinning beachball), the mouse will not move, the system is totally insensitive.

  Strange thing: the Apple Hardware Test showed no problems.

  Another strange thing: once, I was streaming music on the internet. He continued to play and he always did it for 30 minutes. Then, I held the power button for the shutdown of the system.

  After reboot, I had a gray screen with question mark or a sign of ban folder or the symbol of apple with a spinning wheel. After leaving "rest" for a few hours, it starts again. I performed this ritual for several days. So far: the laptop computer is unbootable. It seems it's broken for good.

  The real question is: If there is a hardware problem (motherboard or memory card), how was the system able to work several times for long hours. It may not be a software problem. With the new HARD drive, I reinstalled the system.

  I googled HARD drive cable might be vice and that this could be the source of the problem. As something bad connection. But how can you be sure? Everyone knows about similar problems with his Macbook pro 9.2 (13 inch, mid-2012)?

  I am very disappointed. It's the second Macbook Pro abandons him on me. The first one (15-inch Macbook Pro 4.1) broke after four years due to a faulty graphics unit.

  Thank you for your suggestions.

  To test a possible cable fault, remove the HARD drive, plug it into the MBP via USB and start the MBP with the OPTION key down.  The HARD drive icon should appear, click on it.  If it works normally, then that is an indicator that the SATA cable is defective or has a bad connection.

  Ciao.

• First breaks down after clicking the imported video file

  After clicking on one just imported the video file (in this case. MOV to a Nikon 7100) application hangs and displays "Adobe Premiere Pro CC 20141 has stopped working" and the problem, the details are below. I tried to reset preferences but do not know what else to try. First starts up fine and I can import pictures very well but any video file (I tried. MOV. MP4. AVI. WMV) that gets imported hangs the software as soon as I try to do something with it.

  Any help would be greatly appreciated!

  -Aisha

  System details:

  Windows 7 Professional, Service Pack 1

  Processor: Intel Core i5 - 4570 T CPU @ 2.90 GHz

  RAM: 12 GB

  Details of the problem:

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Adobe first Pro.exe

  Application version: 8.1.0.81

  Application timestamp: 5426694c

  Fault Module name: devenum.dll

  Fault Module Version: 6.6.7600.16385

  Timestamp of Module error: 4a5bded7

  Exception code: c0000005

  Exception offset: 00000000000016a 0

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  Additional information 1: ec5a

  More information 2: ec5adb2545b190cc19da7bdfa78d5bf1

  3 more information: 52eb

  Additional information 4: 52eb6b5eb5247c23714f771b797ebaa7

  Read our privacy statement online:

  http://go.microsoft.com/fwlink/?linkid=104288 & clcid = 0 x 0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  Hello

  Create a new project and without importing anything, go to file > project settings > General and change the playback engine Mercury to the GPU acceleration only software and click on remove previews after clicking OK. Then import the media.

  Hope this helps,

  Regalo

• FMS 4.5 livepkgr application breaks down Linux server using any memory

  We run FMS 4.5.7 associated with the application of the standard livepkgr for direct RTMP and HLS (HDS module disabled streamer). For some reason any after 30 minutes process httpd starts using memory system more and more, and in a minute or two, it blocks the server because it completely empty memory. It doesn't matter how many users are connected to the stream. What I've noticed, is that if there is no user HLS (or HLS is disabled) fine, however it is enough to connect at least one user TLS on the server after 30 minutes and the memory usage begins to increase. If the user connects to 0 - 30 minute window it market.

  I tried to play with the recording options in Event.xml for that stream to flow, but it did not help. I tried to save in a file and in segments.

  Our server has 32 GB of RAM.

  We have modified the file of Apache configuration for workflow Sandbox HLS at the instance level, but it should not be a problem, shouldn't it?

  < location/hls-live >
  True HLSHttpStreamingEnabled
  HttpStreamingLiveEventPath '... / applications/livepkgr/events/_definst_.
  HttpStreamingURLSandboxLevel 'Inst '.
  HttpStreamingContentPath '... / applications.
  HLSMediaFileDuration 8000
  HLSSlidingWindowLength 6
  HLSFmsDirPath "..".
  HLSM3U8MaxAge 2
  HLSTSSegmentMaxAge - 1
  HLSMaxEventAge 300
  HttpStreamingUnavailableResponseCode 503

  Options - Indexes FollowSymLinks
  < / location >

  P.S. We also run application vod in parallel for RTMP and HLS vod streaming. RTMP of VSD and CTS works very well.

  After two weeks, I finally solved it.

  Anyone faced with the same question, make sure you have the serial number of the license charge AND fully rebooted server. At least under Linux by restarting the server through Flash Media Administrator Console let some zombie processes running that blocks the license from loading correctly. Restart all OS instead.

• 10.2.3 FCPX breaks down after 10.12

  I have Final Cut Pro X 10.2.3 and after the update for Sierra 10.12 had an accident no matter what I do in trying to open the application. I tried:

  Remove THE Plugins accordingly to this site

  http://www.Sweetwater.com/sweetcare/articles/uninstall-waves-plugins-Mac/

  Tried to remove FCPX with a full out through

  FCS Remover

  Remove all deleted files

  Restart

  Reinstall from scratch
  Downgraded to 10.2.2 also

  Repeat this at least twice

  System

  MacBook Pro (retina, 13 inches, early 2015)

  2.7 GHz Intel Core i5 processor

  8 GB 1867 MHz DDR3 memory

  Graphics Intel Graphics Iris 6100 1536 MB

  Process:	Final Cut Pro [666]
  Path:	/ Applications / Final Cut Pro.app/Contents/MacOS/Final Cut Pro
  Identifier:	com.apple.FinalCut
  Version:	10.2.3 (276640)
  Update information:	ProEditor-27664000056000000 ~ 1
  Code type:	X 86-64 (native)
  Parent process:	??? [1]
  Responsible:	Final Cut Pro [666]
  ID of the user:	501

  Date/time:	2016-09-21 22:50:51.226-0300
  OS version:	Mac OS X 10.12 (A 16, 323)
  Report Version:	12
  Anonymous UUID:	C62DC6AF-EE76-994A-F130-8AD374A91D6F

  Time since started awake: 570 seconds

  Integrity of system protection: enabled

  Discussion crashed:

  0 dispatch queue: com.apple.main - wire

  Exception type:	EXC_BAD_ACCESS (SIGSEGV)
  Exception codes:	KERN_INVALID_ADDRESS at 0x00005070771bbec8
  Note the exception:	EXC_CORPSE_NOTIFY

  Signal endpoint:	Segmentation fault: 11
  Reason for termination:	Namespace SIGNAL, Code 0xb

  Termination process: Manager exc [0]

  VM regions near 0x5070771bbec8:

  __LINKEDIT

  00000001198a 0000 - 00000001198f5000 [340K] r-/ rwx SM = COW /System/Library/Frameworks/PubSub.framework/Versions/A/PubSub

  ->

  MALLOC_NANO

  0000600000000000-0000600000800000 [8192K] rw-/ rwx SM = PRV

  My first suspicion is that there may plug-ins that need to be updated.

  Even if you have uninstalled and reinstalled, plug-ins that you have in the folder models of animation will be intact (AFAICT); and I guess that even for FxFactory plugins.

  If you have FxFactory plugins, maybe updated FxFactory and check for versions updates to these plugins as well.

  FWIW, reported several of FCP X works well in the Sierra (apart from the return of the timecode display glitch), so he owes something in your installation. Could also be a conflict with other software apparently unrelated.

• 2015.2 breaks down after moving sensitive width or paste

  Since I updated to 2015.2, it crashes after moving the cursor width sensitive or copy and paste the content of the page of a page to another.  I tried to restart the computer for the update and uninstall too. always have the question after reinstall.

  Hi Jason,

  You will receive a file repaired of Marc. There was a corruption in one of the menus of the site (probably from a previous version of Muse). The new version has been correctly claiming corruption, so no further damage could be done. The repaired file should work just fine.

  Thank you

  Colby

• FSX and FSX acceleration not will not activate after the uninstallation and reinstallation of the following problems with Windows 7 upgrade

  After the upgrade to Windows Vista Ultimate SP2 Windows 7, I couldn't FSX to load.  It would hang at the splash screen.  This has since been resolved and may have been a conflict between my card graphic and sound card and maybe even my webcam.  I then tried to reinstall FSX.  However, I decided to load up the Accerleration as before, but when I entered the activation code it says after trying that he could not get an answer to the server and to verify that I had an internet session active.  I did, but he always refused to activate.  So I uninstalled FSX acceleration and ran repair on FSX.  But now, he wants the activation code for FSX and when I write this so I always get the message that it cannot get a response from the server, please try again later or check that your internet connection is active.  I have the full internet connection, but doesn't understand why it won't save my activation codes.  I am limited to 30 minutes and cannot be installed acceleration as it wants the code for FSX.  I read on the forum that you can uninstall and reinstall on the same computer as many times you like then why used enable it?  It seems that he doesn't like my internet connection even though I am on the internet.  Anyone has any ideas. My pc is a Dell Inspiron 530 s with Nvidia 9400Gt card and card Soundblaster with 160 gb 1.66 ghz, 4gig ram and router Netgear WGR614 cable wireless

  Hi steve, I managed to install in the end.  I upgraded to a hard drive more that I wanted more space and copied the image to the new drive.  FSX is not yet accept the keys during the installation.  I ran the above utilities (see blog Amritas) to clear the license keys, empty temporary folders and change the registry entry by using 'regedit' on the command line, but still his wouldn't.  In the end, I installed and uninstalled three times until I finally installed it on a partition on the drive and he finally accepted the license keys.  This was done on the original admin user account that I had problems with from the start.  I have now it works.  The utility I used was KB928080 Microsoft.   I can only suggest you keep trying or partition of your hard drive and try and install on the new partition after erasing the license keys and temp folders (see above Amrita).  I can't guarantee that it works well.  To me it's a question of licenses i.e. acceleration has been uninstalled and reinstalled many times so it will no longer accept the license keys.  Happy installing! I don't know how is it frustrating.

• my wireless keyboard does not work with windows xp

  Hello

  I installed osx el capitan yesterday.

  My wireless keyboard does not work when I'm on windows xp. For the mouse is ok.

  And no problems with OSX el Capitan.

  Thank you very much for the help.

  Boblecingle

  Windows XP is now fifteen years old.

  Are using you it on a Mac somehow, for some reason any?