ZFS SA hand as FRA on a grid Exadata

Similar Questions

• Can not update/save settings to CMC

  Hi first until I'm new on blades I recently acquired a dell M1000e with 2 CMC4.5 an iKvm and some blades second hand when I access the grid through the web portal using the root and calvin I'm unable to apply everything changes but I can't seem to apply some changes in CLI using the iKvm module - I've updated the date and time via CLI and it seems to have saved only when I try to make a change, I get an error 'no successful operation error = 0x2E44' I'm sure that you need lots more information, but as I don't know what that your likely to ask :) Thanks in advance

  Sorry for the delay, the problem seems to lie in the M1000e Panel. Which is where the MCC stores the NVRAM data. I'll send you emails with my contact information. Meet me with your impossible customer Svc tags and we can check on our options. If the system is not in warranty, then the part you need is XP520.

• Is it possible to create different starts to exadata?

  We have a need to have a few more starts other than + DATA and + RECO.

  How do we proceed? Exadata version is x 3.

  Thank you

  user569151-

  As 1188454 said it's possible. First of all, I would like to ask why do you need to create groups of additional disks data, the reco, and dbfs disk group is created by default. I see Exadata users often question the default disk groups and add or modify the disk groups to follow what they did previously on no RAC environments/Exadata ASM. However, usually the groups of data disks and reco are sufficient and allow the best flexibility and performance. One of the reasons to create multiple groups of disks could be wanting to have redundancy options different two different for a group of data disks - to have a prod on high redundancy database and a database of test on normal redundancy for example; but it is not much needs to change.

  Adding groups of disks, you will also need to rearrange and add new disks of grid. You must keep the prefix grid drive and disc corresponding equivalent group names. Do not forget that all the Exadata storage is allocated to the existing network disks and disk groups - and it is necessary to keep the configuration of the necessary balance and optimize performance. So add and resize the disks of the grid and disk groups are not a trivial task if you have already running on the Exadata DB environments and especially if you have enough of free space in the data and the recommendation to drop the grid of all disks in a failgroup - because it requires the removal of data before you proceed to add and resize network disks. I also met problems with the grid disks that end up forcing you to move the data on resizing disks - even if you think you have enough space for a fall aloo any group fail.

  Be sure to correctly estimate the size of the groups drive - factoring in redundancy, lack of groups and book space to handle the failure of the cell - thus the anticipated growth of the data on disk groups. Because if you run out of space in a disk group, you need to go through the process of resizing of all disks in the grid and groups of disks as a result - or buy an additional extension of Exadata or Exadata storage grids. This is one of the reasons why it is often better to stick with just the data and existing Reco.

  To add new records grid and disk groups and resize other becomes very familiar with the information and follow the steps the section "Resizing storage Griddisks" Ch. 7 user's guide the Exadata Machine as well as the information and examples in the MOS score: ' resizing disks grid Exadata: examples (Doc ID 1467056.1). I also like to refer to MOS often remark "How to add Exadata Storage servers using disks 3 TB for an existing database Machine (Doc ID 1476336.1)" what grid addition of disc or resize operations. The use case may not match, but several steps in this note are useful as discusses adding new disks to grid and treats even to create a new group of disks for occasions when you have discs of cells of different sizes.

  Be sure also to that you stick to Exadata recommended for storage as described in "Oracle Exadata Best Practices (Doc ID 757552.1). For example, the total number of griddisks by server storage for a prefix name given (for example: DATA) must match on all storage servers where the given prefix name exist. Also, for best performance you should have each grid prefix disc and corresponding disk group, spread evenly over each cell storage. You will also need to maintain the integrity of the group fail, separation of groups fail by the bin to the loss of cells without losing data.

  Hope that helps. Good luck!

  -Kasey

• 960 grid system: how to import the grid, or how to save the grid in Muse after build by hand

  Hey people,

  This grid system is a fantastic tool for the new designers: http://960.GS/ - Unfortunately, although it is possible to import in many programs Adobe CC, Muse is not on this list.  So, my question is a two parter:

  (1) is it possible to import this Muse grid system that I haven't found yet?

  (2) if I go throw and integrate it by hand, can I save the checkerboard in Muse?

  Thanks for your time.

  Hello

  In Muse, you can set through the Page Properties, go to the Page Properties > Layout > columns > enter the value you want as the grid system.

  After that the grid system page appears which you can define more by going to view > display the grid overlay.

  Once use you it, when you open the same site he would again show the same grid options.

  Thank you

  Sanjit

• Hand-made backup of data and forms of data grids

  Hi guys,.
  
  Is it possible to make a backup of the data grids and forms of data manually (that is, without the use of LCM)? I work with a classic application, and I have files for all of the artifacts that were created (.alternance, .app, .rle, etc.).
  
  Thank you!
  
  See you soon!

  Easily through the U / I? Nope.

  Plan a.
  ------
  "Easier" option would be to use the hfmCopyApplication utility. (c:\hyperion\financialmanagement\server\HfmCopyApplication.exe). [NOTE: If you have 9 system, don't forget to download/get the system 11 version]

  The system 11 copy app gives you a healthy dose of flexibility in what you actually copy. For example, using the utility you can "copy" just forms/grids to another application. As with all versions of the utility, the application does not have to be in the same database as the source application. The utility works at the database level; Therefore, you don't need the application registered or same HFM running anywhere. All you need is available for utility data bases.

  If it was me, I create a new database file, use the 'copy' schedules or forms in the source application. Can I use the database connection and place the files in your folder structure for the storage. If you need to restore, all you need to do is Mount the database and use the copy utility to push them to an application.

  The major drawback here is that if you really want to look at forms / railings, you will need to register for this request and enter. A little annoying if you need to refer to the actual "source" forms and grids. If you simply need for a 'just in case' backup, it's probably a decent option.

  Plan B
  -----

  Write a script to extract all in the database tables. Excuse me, but I won't go into detail here because I have another post on this somewhere. Here are the important details.

  Tables of importance:

  _RPTS
  _BINARYFILES

  Navigate records in RPT for each record with the appropriate file type value. (3 = shape, 5 = grid)
  -For each matching record, take the EncodedLabel and get BinaryFiles lines where Label = EncodedLabel.
  -The BINARYFILE field has the text of the grid/form. I think it is in Unicode, but I don't remember off the top of my head.
  (NOTE: there may be several rows for an encodedlabel!) The field has a maximum length and if you have a grid or a big enough form, it will be more important and will require several lines. Remember to add together)

  NOTE: For bonus points, look at the ParentEncodedLabel. If you wrote your script well enough, you can use that is automatically create the folder hierarchy as well for you. It would be better than grids/forms spill in a folder on your computer/network.

  Plan C
  --------

  Review the U / I and click on about ten thousand times... Not recommended. Probably easier to curl up in the fetal position and cry yourself to sleep. :)

  Plan D
  --------
  Use the API to script a solution for this. The disadvantage of going directly through the database is that if they ever change the page layout, you have to adjust your scripts. If you use APIs published, in THEORY, these types of changes are extracted from your share as long as the ENTRY and EXIT of the API do not change, utility no matter what you do will work just as well. Sometimes the change in the API to the point where you have to adjust your program anyway, although...

  It's probably the more correct way to this address, SQL scripting is quite simple and is probably easier knock out.

• Move the "Data Service" volume ZFS on OSX Server

  Hi all

  I would like to move all the data service to a ZFS volume on a Mavericks OSX Server. This option can be found here:
  Server.app-> your server-> settings
  and is called "Data Service". As someone has already done this? It works or what I have to do a manual config, whenever the server restarts?

  Hi all

  So I'll answer my own question.  The answer is no, in fact, the app Server does not detect even the zfs volume.  I also try to cheat and to synchronize the/Library/Server volume ZFS and softlink then the original file to the copy of the zfs volume, but App Server would no longer work.

  Then Mac OS x still don't like ZFS much.

  I reformatted the drive with appleRAID, and then I could move everything using the button in the application.  I noticed that this original file is still there.  If it's really just an arrangement written somewhere.  Anyone know where this parameter is written?  Maybe I could get data on the ZFS drive sync and write this setting by hand.

• Several colors of background on a GOLD-table fill to draw graphical point * behind * the grid lines

  I have some a matter of aesthetics.

  I wrote a program that displays data for binary files. These binaries have blocks of data, an hour or two. Each piece is a playback window, and there are a handful of reading windows per day.

  The data view is in effect, what I'm working on now is a more intuitive way to choose what data should be displayed.

  My goal is to have a graph of waveform with the X axis represents a day full (0 - hr 24 hr) and is indicated on the chart what time windows are available for review, that is, data have been collected. The background of a "collected" window will be yellow (or another color), while times in the course of which no given is collected will be black. The user will then drag the sliders to select the window of what he or she wants to see the data.

  It was quite easy to achieve by drawing the curve a digital signal (1 for data collected during this period, 0 for no) and point-fill with yellow to zero. My only problem with this solution is that filling point appears on the lines of the grid, that does not look quite right.

  Y at - it an easy way to get the grid to appear at the top of the charts, or is there a way to programmatically set multiple background colors (it could do the same thing)?

  Use the property "draw pictures" and draw your own grid before image.

• COMMAND NOT FOUND - ORACLE GRID

  Hi all

  While typing in the mentioned order, I received the command not found below. I wonder what could be the reason. I installed ORACLE GRID on my test server. Also, feel free to check the output of bash_profile for grid below: -.

  [grid@storage Desktop] $ sqlplus / as sysdba

  bash: sqlplus: command not found

  asmca $ [grid@storage Desktop]

  bash: asmca: command not found

  [grid@storage Desktop] $ lsnrctl status

  bash: lsnrctl: command not found

  [grid@storage Desktop] $

  [grid@storage Desktop] $ vi ~/.bash_profile

  # .bash_profile

  # Get the aliases and functions

  If [~/.bashrc - f]; then

  . ~/.bashrc

  FI

  # Specific programs startup and user environment

  $PATH = path: $HOME/bin

  export PATH

  ORACLE_SID = + ASM; export ORACLE_SID

  JAVA_HOME = / usr/local/java. Export JAVA_HOME

  ORACLE_BASE = / u01/app/grid; export ORACLE_BASE

  ORACLE_HOME=/U01/app/11.2.0/grid; Export ORACLE_HOME

  ORACLE_TERM = xterm; export ORACLE_TERM

  NLS_DATE_FORMAT = 'HH24:MI:SS OF MON-DD-YYYY "; Export NLS_DATE_FORMAT

  TNS_ADMIN = $ORACLE_HOME/network/admin; Export TNS_ADMIN

  ORA_NLS11 = $ORACLE_HOME/nls/data; export ORA_NLS11

  Path=.:${JAVA_HOME}/bin:${path}:$Home/bin:$ORACLE_HOME/bin

  PATH = ${PATH}: / usr/bin: / bin: / usr/bin / X 11: / usr/local/bin

  PATH = ${PATH}: / u01/app/common/oracle/bin

  export PATH

  LD_LIBRARY_PATH = $ORACLE_HOME/lib

  LD_LIBRARY_PATH = ${LD_LIBRARY_PATH}: $ORACLE_HOME/oracm/lib

  LD_LIBRARY_PATH = ${LD_LIBRARY_PATH}: / lib: / usr/lib: / usr/local/lib

  export LD_LIBRARY_PATH

  CLASSPATH = $ORACLE_HOME/JRE

  CLASSPATH = ${CLASSPATH}: $ORACLE_HOME/jlib

  CLASSPATH = ${CLASSPATH}: $ORACLE_HOME/rdbms/jlib

  CLASSPATH = ${CLASSPATH}: $ORACLE_HOME/network/jlib

  Export CLASSPATH

  THREADS_FLAG = native; export THREADS_FLAG

  Export = TEMP/tmp

  export TMPDIR = / tmp

  umask 022

  You should also check the USER ORACLE .bash_profile OUTPUT as well. The following is an OUTPUT

  [oracle@storage ~] $ vi ~/.bash_profile

  # .bash_profile

  # Get the aliases and functions

  If [~/.bashrc - f]; then

  . ~/.bashrc

  FI

  # Specific programs startup and user environment

  $PATH = path: $HOME/bin

  export PATH

  ORACLE_SID = orcl; export ORACLE_SID

  ORACLE_UNQNAME = orcl; export ORACLE_UNQNAME

  JAVA_HOME = / usr/local/java. Export JAVA_HOME

  ORACLE_BASE = / u01/app/oracle; export ORACLE_BASE

  ORACLE_HOME=$ORACLE_BASE/product/11.2.0/Db_1; Export ORACLE_HOME

  ORACLE_TERM = xterm; export ORACLE_TERM

  NLS_DATE_FORMAT = 'HH24:MI:SS OF MON-DD-YYYY "; Export NLS_DATE_FORMAT

  TNS_ADMIN = $ORACLE_HOME/network/admin; Export TNS_ADMIN

  ORA_NLS11 = $ORACLE_HOME/nls/data; export ORA_NLS11

  Path=.:${JAVA_HOME}/bin:${path}:$Home/bin:$ORACLE_HOME/bin

  PATH = ${PATH}: / usr/bin: / bin: / usr/bin / X 11: / usr/local/bin

  PATH = ${PATH}: / u01/app/common/oracle/bin

  export PATH

  LD_LIBRARY_PATH = $ORACLE_HOME/lib

  LD_LIBRARY_PATH = ${LD_LIBRARY_PATH}: $ORACLE_HOME/oracm/lib

  LD_LIBRARY_PATH = ${LD_LIBRARY_PATH}: / lib: / usr/lib: / usr/local/lib

  export LD_LIBRARY_PATH

  CLASSPATH = $ORACLE_HOME/JRE

  CLASSPATH = ${CLASSPATH}: $ORACLE_HOME/jlib

  CLASSPATH = ${CLASSPATH}: $ORACLE_HOME/rdbms/jlib

  CLASSPATH = ${CLASSPATH}: $ORACLE_HOME/network/jlib

  Export CLASSPATH

  THREADS_FLAG = native; export THREADS_FLAG

  Export = TEMP/tmp

  export TMPDIR = / tmp

  umask 022

  PROBLEM has BEEN SOLVED NOW by tuning in ORACLE ENTERPRISE LINUX 6.5 (making the new facility). I want to especially thank you Aman.... for his great support and advice. Also be sure to check the blog that I have prepared during installation.

  Blog URL: Setup Guide of grid complete Oracle 11 g on Oracle Enterprise Linux 6.5

  In order to perform the complete Oracle with the Installation of the grid. Follow the mentioned below of the measures accordingly.

  1 install Oracle Enterprise Linux 6.5 (if you have already installed OS then follow step 2)

  2 oracle 11 g with Installation of the rack on Oracle Enterprise Linux 6.5 (part of the Configuration)

  3 prepare the disk to ASM DISK using ASMLib
  4. infrastructure installation oracle Grid (DATA of GROUP of DISKS ASM creation)

  5. using creation of GROUP of DISKS ASM FRA ASMCA (ASM Configuration Wizard)

  6. Install ORACLE DATABASE SOFTWARE only

  7. Configure the LISTENER

  8. create the DATABASE

  9 Start ENTERPRISE MANAGER CONTROL

• 12 c grid rhel6 iscsi asm Storage Infrastructure

  I'm working on the construction of my 12 c Grid Infrastructure database by using the following:

  • RHEL 6.6
    • node rac1
    • node rac2
  • I use Synology NAS storage Oracle Clusterware RAC shared storage.  The following objectives were discovered by node rac1 and rac2. (/ dev/sda/dev/sdb/dev/sdc)
    • LUN/iSCSI shared CRS 10 g
    • LUN/iSCSI shared DATA 400 G
    • LUN/iSCSI shared FRA 400 G

  My question is?

  How do these iSCSI disks for ASM 12 c?

  Should I format each drive on each node and then oracleasm create discs?

  Please notify.

  BECAUSE two-node Oracle 12 c Grid Infrastructure installed on RHEL6

  Shared Storage for laboratory: Synology NAS which I created three LUNS/iSCSI devices:

  1 for the CRS

  1 for DATA

  1 for FRA

  Each node (initiator) discovered and connect on the objectives, the DATA and FRA

  I then used fdisk/dev/sda and/dev/sdb, / dev/sdc, which created

  / dev/sda1

  / dev/sdb1

  / dev/sdc1

  Initialized oracleasm on both RAC nodes and created the CBC records using the oracleasm createdisk CRS/dev/sda1

  Then oracleasm scandisk

  Then oracleasm listdisks

  And CBC, DATA and FRA discs seem to be working now.

• DBCA SHOWING NO DATA AND FRA... Help, please?

  Hi, I was trying the new installation of Oracle 11 g. Executing command (DBCA), to the DATA CONFIGURATION WIZARD, step 6 of 12: location of the database files. In the database box, I click to BROSE BUTTON but it does not show DATA or FRA. You will find the attached screenshot for more clear.

  

  PROBLEM WAS SOLVED... because we know that /dev/raw / * must contain the ORACLE as USER AND OINSTALL as a GROUP in order to distribute the ASM for DATA and FRA... No ONE including ME REMARQUERAIT the USER AND GROUP that I presented above. I am again submitting the above information here as well, or you can check the same information [root@example dev] # ls - ld/dev/raw / * of the above. So this is what the user and group was before. Because to show DATA AND FRA drive to the title of the ASM, the/dev/RAW/expected to be under ORACLE as USER AND OINSTALL as GROUP but before /dev/raw / * was under ROOT as USER and DRIVE as a GROUP and because of this it was not showing the DATA and FRA assigned disk while using the DBCA COMMAND

  [root@example dev] # ls - ld/dev/raw / *.

  CRW - rw-. 1 root disk 162, 1 Jan 29 21:29 / dev/raw/raw1

  CRW - rw-. 1 root disk 162, 2 Jan 29 21:29 / dev/raw/raw2

  CRW - rw-. 1 root disk 162, 3 Jan 29 21:29 / dev/raw/raw3

  CRW - rw-. 1 root disk 162, 4 Jan 29 21:29 / dev/raw/raw4

  CRW - rw-. 1 root disk 162, 5 Jan 29 21:29 / dev/raw/raw5

  CRW - rw-. 1 root disk 162, 6 Jan 29 21:29 / dev/raw/raw6

  CRW - rw-. 1 oracle oinstall 162, 0 Jan 29 21:29 / dev/raw/rawctl

  THE MAIN PROBLEM in MY CASE WAS ON AFTER, if you give OR type chown-r oracle: oinstall/dev/raw, chmod 770/dev/raw, chmod 660/dev/raw/raw * MANUALLY then it will display the correct GROUPS and USERS

  [root@example Desktop] # chown r oracle: oinstall/dev/raw

  [root@example Desktop] # chmod 770/dev/raw

  [root@example Desktop] # chmod 660/dev/raw/raw *.

  [root@example Desktop] # ls - ld/dev/raw / *.

  CRW - rw-. 1 oracle oinstall 162, 1 Jan 30 09:35 / dev/raw/raw1

  CRW - rw-. 1 oracle oinstall 162, 2 Jan 30 09:35 / dev/raw/raw2

  CRW - rw-. 1 oracle oinstall 162, 3 Jan 30 09:35 / dev/raw/raw3

  CRW - rw-. 1 oracle oinstall 162, 4 Jan 30 09:35 / dev/raw/raw4

  CRW - rw-. 1 oracle oinstall 162, 5 Jan 30 09:35 / dev/raw/raw5

  CRW - rw-. 1 oracle oinstall 162, 6. Jan 30 09:35 / dev/raw/raw6

  CRW - rw-. 1 oracle oinstall 162, 0 Jan 30 09:16 / dev/raw/rawctl

  [root@example Desktop] #.

  WHILE

  If you the same things chown-r oracle: oinstall/dev/raw, chmod 770/dev/raw, chmod 660/dev/raw/raw * in /etc/rc.d/rc.local then it shows USERS and DRIVE as root and disc.

  [root@example ~] vi /etc/rc.d/rc.local

  ! / bin/sh

  #

  # This script will be executed * after * all the other init scripts.

  # You can put your own stuff of initialization here if you do not

  # want to do the full Sys V style init stuff.

  touch/var/lock/subsys/local

  / dev/raw/raw1 gross/dev/sda11

  / dev/raw/raw2 gross/dev/sda12

  / dev/raw/raw3 gross/dev/sda13

  / dev/raw/raw4 gross/dev/sda14

  / dev/raw/raw5 gross/dev/sda15

  / dev/raw/raw6 gross/dev/sda16

  chown-r oracle: oinstall/dev/raw

  chmod 770/dev/raw

  chmod 660/dev/raw/raw *.

  [root@example dev] # reboot or refresh

  AFTER THEN AGAIN if YOU CHECK the USER AND the GROUP using ls - ld/dev/raw / * then his root watch and the disk commands as the user and group. It shows the root and the disc where it should be ORACLE and OINSTALL under USERS and GROUPS. I couldn't find the reason why even after put chown-r oracle: oinstall/dev/raw, chmod 770/dev/raw, chmod 660/dev/raw/raw * shows the wrong USER AND GROUP?

  [root@example dev] # ls - ld/dev/raw / *.

  CRW - rw-. 1 root disk 162, 1 Jan 29 21:29 / dev/raw/raw1

  CRW - rw-. 1 root disk 162, 2 Jan 29 21:29 / dev/raw/raw2

  CRW - rw-. 1 root disk 162, 3 Jan 29 21:29 / dev/raw/raw3

  CRW - rw-. 1 root disk 162, 4 Jan 29 21:29 / dev/raw/raw4

  CRW - rw-. 1 root disk 162, 5 Jan 29 21:29 / dev/raw/raw5

  CRW - rw-. 1 root disk 162, 6 Jan 29 21:29 / dev/raw/raw6

  CRW - rw-. 1 oracle oinstall 162, 0 Jan 29 21:29 / dev/raw/rawctl

  SO HERE'S WHAT I DID... THE SOLUTION WORKING for me is that I created the shell script file named test.sh.

  STEP 1: CREATE the SHELL SCRIPT FILE test.sh

  [root@example Desktop] # cat /root/test.sh

  chown-r oracle: oinstall/dev/raw

  chmod 770/dev/raw

  chmod 660/dev/raw/raw *.

  STEP 2: Place rc.local file test.sh

  [root@example ~] vi /etc/rc.d/rc.local

  ! / bin/sh

  #

  # This script will be executed * after * all the other init scripts.

  # You can put your own stuff of initialization here if you do not

  # want to do the full Sys V style init stuff.

  touch/var/lock/subsys/local

  / dev/raw/raw1 gross/dev/sda11

  / dev/raw/raw2 gross/dev/sda12

  / dev/raw/raw3 gross/dev/sda13

  / dev/raw/raw4 gross/dev/sda14

  / dev/raw/raw5 gross/dev/sda15

  / dev/raw/raw6 gross/dev/sda16

  /root/test.sh

  STEP 3: REFRESH rc.local or you can RESTART the pc once more

  [root@example Desktop] # /etc/rc.d/rc.local

  STEP 4: CHECK the USERS and GROUPS as mentioned below: -.

  [root@example Desktop] # ls - ld/dev/raw / *.

  CRW - rw-. 1 oracle oinstall 162, 1 Jan 30 09:35 / dev/raw/raw1

  CRW - rw-. 1 oracle oinstall 162, 2 Jan 30 09:35 / dev/raw/raw2

  CRW - rw-. 1 oracle oinstall 162, 3 Jan 30 09:35 / dev/raw/raw3

  CRW - rw-. 1 oracle oinstall 162, 4 Jan 30 09:35 / dev/raw/raw4

  CRW - rw-. 1 oracle oinstall 162, 5 Jan 30 09:35 / dev/raw/raw5

  CRW - rw-. 1 oracle oinstall 162, 6. Jan 30 09:35 / dev/raw/raw6

  CRW - rw-. 1 oracle oinstall 162, 0 Jan 30 09:16 / dev/raw/rawctl

  [root@example Desktop] #.

  asmca $ [grid@example Desktop]

  

  DATA AND FRA PROBLEM SOLVED

• File system for FRA and external backups

  Oracle 11g R2.

  The FRA drive is formatted using Linux x 83 put on Diskgroup + FRA system.

  Backups are stored outside on an ext3 file system.

  Suppose now the database gets completely crashed and I need to recover by continuing external backups.  I will copy the external backups to the + FRA disk and then perform the recovery from there.

  My question is, given that external backups are on ext3 file system, while the FRA is the Oracle ASM filesystem, there will be a problem for the use of the file systems of the two difference?

  Thank you

  Scott

  scottjhn wrote:

  To summarize the issue:

  In my system, the database will be on ASM disk group + DATA (disk1 disk2).

  I will use another disk, disk3 (ext3 file system) for FRA, to organize data files backups and multiplexed logs (archive logs, online newspapers and control files).

  Earlier you said "I'll use the + FRA (ASM disk group) for the fast recovery area that holds that archiving multiplexed logs, recovery online logs, and control files.»  Nothing else. »

  Now, I need one more place to hold the copy of the multiplexed logs.

  Wouldn't not on the same + (ABOVE)?  Alternatively, use a disk full-fledged, disk4 (ext3 file system)?

  Thank you

  Scott

  First of all, the reason for multiplexing online redo logs and control files is not the same as that of multiplexing archivelogs. Do it online and the control file are actually a part of the database.  The database will not work without them.  This is why it is so important to have multiplex.  Archivelogs, on the other hand, are part of your backup strategy.  The database itself really doesn't care if you have any archivelogs at all.  The archivelogs multiplexing is much less common.  I have never multiplexed mine, but I do not have a task that runs every hour to copy any newly created on a server off-site.

  If your database is on ASM, at least a control file and a member of each group of redo log must be in ASM.  Technically, is not having to be, but it's really foolish not to do so.  Where to put the second copy?  Probably several schools of thought on this.  If your FRA is on ext3, so it seems a simple decision... a FRA copy, a copy in its default location in ASM.

• How can I change the columns in the fluid grid to a darker color.  The default color is too gray for me to see them on my screen

  Thanks for any comments I receive. This version is CC2015.

  peoj

  Dreamweaver does not create columns colored for a grid "bootstrap" for good reason: each line has its own set of columns in the layout. So, if you nest a row within another column, the nested line gets a new grid layout of 12 columns (assuming you are using a default grid). Although having a color grid layout looks like a good idea, it would become very difficult to work as soon as you start the nesting of the lines.

  In Live View mode, Dreamweaver adds a handle to resize the column to the right edge of the currently selected column:

  

  There are also a handful of column Offset on the left edge

  

  When you drag handles, Dreamweaver snaps to the next column and it will update the .col-*-* or the classes in the display of the item. In the previous screenshot, you can see immediately that the currently selected column is an important feature of 10 columns wide and is offset by a column.

  It takes a little practice to get used to its operation, but it quickly becomes clear what are the columns of size without the distraction of a color to the background grid.

• Grid Infra configuration failed when running root.sh on the second node

  Hello world.

  I am new guy on RAC environment. When you try to install Oracle RAC on the local environment, I had this problem:

  -J' have run root.sh successfully on a local first node

  -After that, the first node, there are 3 cards of virtual network created to SCAN listening addresses

  -After the success of action on the first node, I tried to run this script on the second node, but the error occurred:

  CRS-2676: Start of 'ora.DATA.dg' on 'dbnode2' succeeded
  PRCR-1079 : Failed to start resource ora.scan1.vip
  CRS-5017: The resource action "ora.scan1.vip start" encountered the following error:
  CRS-5005: IP Address: 192.168.50.124 is already in use in the network
  . For details refer to "(:CLSN00107:)" in "/u01/app/11.2.0/grid/log/dbnode2/agent/crsd/orarootagent_root/orarootagent_root.log".
  
  CRS-2674: Start of 'ora.scan1.vip' on 'dbnode2' failed
  CRS-2632: There are no more servers to try to place resource 'ora.scan1.vip' on that would satisfy its placement policy
  PRCR-1079 : Failed to start resource ora.scan2.vip
  CRS-5017: The resource action "ora.scan2.vip start" encountered the following error:
  CRS-5005: IP Address: 192.168.50.122 is already in use in the network
  . For details refer to "(:CLSN00107:)" in "/u01/app/11.2.0/grid/log/dbnode2/agent/crsd/orarootagent_root/orarootagent_root.log".
  
  CRS-2674: Start of 'ora.scan2.vip' on 'dbnode2' failed
  CRS-2632: There are no more servers to try to place resource 'ora.scan2.vip' on that would satisfy its placement policy
  PRCR-1079 : Failed to start resource ora.scan3.vip
  CRS-5017: The resource action "ora.scan3.vip start" encountered the following error:
  CRS-5005: IP Address: 192.168.50.123 is already in use in the network
  . For details refer to "(:CLSN00107:)" in "/u01/app/11.2.0/grid/log/dbnode2/agent/crsd/orarootagent_root/orarootagent_root.log".
  
  CRS-2674: Start of 'ora.scan3.vip' on 'dbnode2' failed
  CRS-2632: There are no more servers to try to place resource 'ora.scan3.vip' on that would satisfy its placement policy
  
  start scan ... failed
  FirstNode configuration failed at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 9379.
  /u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
  
  

  I tried again with several times (with left-hand) but the problem was still there. Can you explain to me?

  -Why, after running root.sh on the first node, all IP SCANNER interfaces was created on this node? This is the reason why root.sh fails on the second node.

  -How to solve?

  I use the server for address scan local DNS resolves to 3 IPs, and I can run script runcluvfy.sh with success on both nodes.

  I thank in advance

  PS:

  I use two virtual machines in vmware. After running root.sh on the first node, I checked and found this funny information:

  [oracle@dbnode1 sshsetup] $ / sbin/ifconfig

  eth0 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.66 Bcast:192.168.50.255 mask: 255.255.255.0

  ADR inet6: fe80::20c:29ff:febc:431 b / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 249814 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 2956882 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 24913472 (23.7 MiB) TX bytes: 4369984705 (4.0 GiB)

  eth0: 1 link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.120 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:2 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.122 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:3 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.123 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:4 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.124 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth1 Link encap HWaddr 00: 0C: 29:BC:43:25

  INET addr:192.168.29.10 Bcast:192.168.29.255 mask: 255.255.255.0

  ADR inet6: fe80::20c:29ff:febc:4325 / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 471 errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 664 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 82216 (80.2 KiB) TX bytes: 107920 (105.3 KiB)

  eth1:1 Link encap HWaddr 00: 0C: 29:BC:43:25

  INET addr:169.254.75.201 Bcast:169.254.255.255 mask: 255.255.0.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Lo encap:Local Loopback link

  INET addr:127.0.0.1 mask: 255.0.0.0

  ADR inet6:: 1/128 Scope: host

  RACE of LOOPING 16436 Metric: 1

  Fall of RX packets: 10626 errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 10626 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:0

  RX bytes: 7942626 (7.5 MiB) TX bytes: 7942626 (7.5 MiB)

  I think it's because of the failure on node 2

  UPDATE:

  That thing is normal, I ignored it and the installation can continue normally. Thank you all for your help.

• Dreamweaver CC - I need hands on coaching. Where should I go for it?

  I need hands on assistance and coaching. I need to share my screen with an expert to show me what to do to make this work. I've been good to Dreamweaver CS3, which was more intuitive to understand myself, but the creation of the sensitive site, I need even if the mastery of this new version of Dreamweaver CC (I've got 2014 CC and CC 20141) is beyond my skills. Telephone support Adobe will not help me further with this, also CAT said they can't do it for me either. Where should I go for this type of assistance?

  I am updating a Web site I did years ago in Dreamweaver CS3. There has got to be reactive in office, Tablet and mobile phone. Adobe technical support helped me to make a fluid grid presentation, 3 sizes of jpg images, I did for the homepage work, but I can't get the navigation customized, that I need to work. Home page uses the image full screen with superimposed at the bottom icons which are used for navigation. I created this in Photoshop, but I also did versions of fireworks that change the images of the icons on the mouse overview, links to other pages by clicking on. Created 3 jpg in Photoshop that I can use for the site if Fireworks files are incompatible in fluid grid. I also have 3 .htm files from Fireworks for three sizes: Desktop - 1900 x 1267, Tablet - 1152 x 768, Cell - 480 x 800, at 72 dpi. The Fireworks files have icon second state images that switch to move the mouse.  I can't get the FW files to work in fluid grid. Technical support told me that FW files cannot be sensitive unless I have write the custom CSS code manually.  Otherwise, I tried to create interactive image and hotspots on the image of the front page in DW CC 20141 Adobe forum said that hotspots only are not supported in this version of DW - then took their recommendation and downloaded & installed DW 2014. Was able to create hotspots with links to other pages using DW 2014 but when I saw in the browser that everything is messed up. Fluid grid image sizes are all visible tiles instead of resizing with versicles with the size of the screen as they did before I made the hot spots.

  Yet once again, I need hands on help for many problems. Thanks to indicate where to go for you help, thank you!

  Coding of the adapted web sites requires a good understanding of the CSS media and HTML5 syntax.

  I think you need to take a course structured in responsive web design.  If you try to recreate your old site adapted, you must first understand what works and what does not work in the provisions of width %.

  Dreamweaver tutorials from lynda.com

  Image maps aren't going to work well because the hotspot regions will not resize with the image.   Fireworks could be good to create models and images for your site, but this is not a good tool for the construction of sensitive sites & navigation elements.  The code is much too rigid and unstable.

  I think you should also be familiar with the appropriate frameworks available on the web.  They can help you achieve your goals of project in ways you might not already examined.

  Bootstrap

  http://GetBootstrap.com/

  Zurb Foundation

  http://Foundation.ZURB.com/templates.php

  Reusable skeleton

  http://www.getskeleton.com/

  Initializr (HTML5 Boilerplate, sensitive or "bootstrap")

  http://www.Initializr.com/

  Extension FREE Bootstrap of the DMX Zone for DW

  http://www.DMXzone.com/go/21759/DMXzone-bootstrap/

  Seven Page Packs (Commercial CSS Templates for sensitive Sites) project

  http://www.Projectseven.com/products/templates/index.htm

  Nancy O.

• Dreamweaver CC fluid grid divs do not stretch to cover 100% of the screen

  Hello

  I do another sensible provision using DW CC and I came across a problem.

  Design colored divs that spans the entire page to 100% with a background color and borders.

  I already did the design upwards as a layout width fixed to get the color codes etc. and that works well, with colors that covers the screen.

  Now, I'm putiing design in DW CC using checkerboard to fluid and there is a white border on the Web site.

  I can't work on how to get rid of this. Here are excerpts from my two lots of CSS stylesheets, one for a presentation grid fixed and one for a structure reactive

  CSS FIXED WIDTH

  body, td, th {}

  do-family: Calibri;

  do-size: 14px;

  Color: #000;

  }

  {body

  left margin: 0px;

  margin-top: 0px;

  margin-right: 0px;

  margin-bottom: 0px;

  }

  * / The wrapper header spans the entire screen no matter what size and does not have a white border on the left and the right

  {#headerWrapper}

  background-color: #000;

  height: 101px;

  Width: 100%;

  margin-right: auto;

  left margin: auto;

  border-bottom-width: 2px;

  border-bottom-style: solid;

  border-bottom-color: #BDDB6D;

  }

  FLUID GRID CSS

  The fluid layout grid CSS has the following in it:

  {.fluid}

  Clear: both;

  left margin: 0;

  Width: 100%;

  float: left;

  display: block;

  }

  {.fluidList}

  list-style: none;

  list-style-image: none;

  margin: 0;

  padding: 0;

  }

  / * Mobile layout: 480px and below. */

  {.gridContainer}

  left margin: auto;

  margin-right: auto;

  Width: 86,45%;

  padding-left: 2,275%;

  padding-right: 2,275%;

  Clear: none;

  float: none;

  }

  {#div1}

  }

  * / This header wrapper extends through the presentation of the grid only and has a white border on the left and the right

  {#headerWrapper}

  Max-width: 100%;

  height: 101px;

  background-color: #000;

  border-bottom-width: 2px;

  border-bottom-style: solid;

  border-bottom-color: #BDDB6D;

  }

  What do I need add to the fluid grid layout to make the headerWrapper div span the screen, no matter what width?

  What should I put in the grid CSS transmissions so that he can do that?

  Thanks in advance!

  I did it! I can't believe. The code I used is followed. The bar divs set color and at the border through the entire page and the wrapper divs to contain content in the various bars across the page.

  I must say that DW CC fluid grids are much more stable to work with and it can take a lot of coding by hand now. This is a great improvement on when I tried to use grids of fluid on a project last year.

  IN THE SECTION MULTIMEDIA PHONE REQUEST

  {.gridContainer}

  left margin: auto;

  margin-right: auto;

  Width: 100%;

  padding-left: 0;

  padding-right: 0;

  Clear: none;

  float: none;

  }

  {#headerBar}

  background-color: #000;

  min-height: 101px;

  border-bottom-width: 2px;

  border-bottom-style: solid;

  border-bottom-color: #BDDB6D;

  padding-top: 2.735px;

  }

  {#headerWrapper}

  Width: 86,45%;

  padding-left: 2,275%;

  padding-right: 2,275%;

  Clear: none;

  float: none;

  left margin: auto;

  }

  {#menuAnimationBar}

  background-color: #B7B7B7;

  height: 293px;

  border-bottom-width: 2px;

  border-bottom-style: solid;

  border-bottom-color: #BDDB6D;

  background-image:-webkit-gradient (linear, 50.00% 0.00%, 50.00% 100.00%, color-stop (0%, rgba (153,153,153,1.00)), color-stop (100%, rgba (192,192,192,1.00)));

  background-image:-webkit-linear-gradient(270deg,rgba(153,153,153,1.00) 0%,rgba(192,192,192,1.00) 100%);

  background-image: linear-gradient (180deg, rgba (153,153,153,1.00) 0%,rgba(192,192,192,1.00) 100%);

  display: none;

  }

  {#contentBar}

  background-color: #F8FCF1;

  min-height: 200px;

  background-image:-webkit-gradient (linear, 50.00% 0.00%, 50.00% 100.00%, color-stop (0%, rgba (245,251,234,1.00)), color-stop (100%, rgba (251,253,247,1.00)));

  background-image:-webkit-linear-gradient(270deg,rgba(245,251,234,1.00) 0%,rgba(251,253,247,1.00) 100%);

  background-image: linear-gradient (180deg, rgba (245,251,234,1.00) 0%,rgba(251,253,247,1.00) 100%);

  }

  {#contentWrapper}

  Width: 86,45%;

  padding-left: 2,275%;

  padding-right: 2,275%;

  Clear: none;

  float: none;

  left margin: auto;

  }

  {#socialMediaBar}

  background-color: #000;

  min-height: 83px;

  border-top-width: 2px;

  border-bottom-width: 2px;

  border-top-style: solid;

  border-bottom-style: solid;

  border-bottom-color: #BDDB6D;

  border-bottom-color: #BDDB6D;

  }

  {#socialMediaWrapper}

  color: #FFF;

  Width: 86,45%;

  padding-left: 2,275%;

  padding-right: 2,275%;

  Clear: none;

  float: none;

  left margin: auto;

  padding-top: 2,275%;

  }

  {#footerBar}

  color: #FFF;

  background-color: #AAAAAA;

  min-height: 176px;

  background-image:-webkit-gradient (linear, 50.00% 0.00%, 50.00% 100.00%, color-stop (0%, rgba (153,153,153,1.00)), color-stop (100%, rgba (185,185,185,1.00)));

  background-image:-webkit-linear-gradient(270deg,rgba(153,153,153,1.00) 0%,rgba(185,185,185,1.00) 100%);

  background-image: linear-gradient (180deg, rgba (153,153,153,1.00) 0%,rgba(185,185,185,1.00) 100%);

  }

  {#footerWrapper}

  Width: 86,45%;

  padding-left: 2,275%;

  padding-right: 2,275%;

  Clear: none;

  float: none;

  left margin: auto;

  }

  IN THE MULTIMEDIA TABLET QUERY SECTION

  {.gridContainer}

  Width: 100%;

  padding-left: 0%;

  padding-right: 0%;

  Clear: none;

  float: none;

  left margin: auto;

  }

  {#div1}

  }

  {#headerBar}

  }

  {#headerWrapper}

  Width: 90.675%;

  padding-left: 1.1625%;

  padding-right: 1.1625%;

  Clear: none;

  float: none;

  left margin: auto;

  }

  {#menuAnimationBar}

  display: none;

  }

  {#contentBar}

  }

  {#contentWrapper}

  Width: 90.675%;

  padding-left: 1.1625%;

  padding-right: 1.1625%;

  Clear: none;

  float: none;

  left margin: auto;

  }

  {#socialMediaBar}

  }

  {#socialMediaWrapper}

  Width: 90.675%;

  padding-left: 1.1625%;

  padding-right: 1.1625%;

  Clear: none;

  float: none;

  left margin: auto;

  }

  {#footerBar}

  }

  {#footerWrapper}

  Width: 90.675%;

  padding-left: 1.1625%;

  padding-right: 1.1625%;

  Clear: none;

  float: none;

  left margin: auto;

  }

  {#menuAnimationWrapper}

  }

  IN THE PC MEDIA QUERY SECTION

  {.gridContainer}

  Width: 100%;

  Max-width: 1920px;

  padding-left: 0%;

  padding-right: 0%;

  margin: auto;

  Clear: none;

  float: none;

  left margin: auto;

  }

  {#headerBar}

  }

  {#headerWrapper}

  Width: 88.5%;

  Max-width: 1232px;

  padding-left: 0.75%;

  padding-right: 0.75%;

  margin: auto;

  Clear: none;

  float: none;

  left margin: auto;

  }

  {#menuAnimationBar}

  display: block;

  }

  {#contentBar}

  }

  {#contentWrapper}

  Width: 88.5%;

  Max-width: 1232px;

  padding-left: 0.75%;

  padding-right: 0.75%;

  margin: auto;

  Clear: none;

  float: none;

  left margin: auto;

  }

  {#socialMediaBar}

  }

  {#socialMediaWrapper}

  Width: 88.5%;

  Max-width: 1232px;

  padding-left: 0.75%;

  padding-right: 0.75%;

  margin: auto;

  Clear: none;

  float: none;

  left margin: auto;

  }

  {#footerBar}

  }

  {#footerWrapper}

  Width: 88.5%;

  Max-width: 1232px;

  padding-left: 0.75%;

  padding-right: 0.75%;

  margin: auto;

  Clear: none;

  float: none;

  left margin: auto;

  }

  {#menuAnimationWrapper}

  Width: 88.5%;

  height: 293px;

  Max-width: 1232px;

  padding-left: 0.75%;

  padding-right: 0.75%;

  margin: auto;

  Clear: none;

  float: none;

  left margin: auto;

  }