zoom level on internet, programs, Wallpapers are stuck up

Similar Questions

• Icons are not displayed properly in Gmail when the zoom level is between 150 and 200%

  Icons in Gmail will not correctly displayed in Firefox at all zoom levels. The problem does not occur in less than 150% zoom levels or levels of zoom to 200% or more. Levels of zoom between (150%) correct icons are not displayed until the mouse passes on their location.

  The attached pictures show screen shots to 140% (OK), 150% (problems shown, before moving the mouse), 150% (problems shown, after moving the mouse), 190% (problems) and 200% (now OK again)

  The problem was not resolved by disabling extensions, go to mode without failure or update Firefox.

  Firefox and extensions/plugins are all fully patched.

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• Google maps do not appear right, the game is good, but about half of it is said ' we're sorry, but we have no maps at this zoom level for this region. " Zoom does not help.

  When you display a Google map, I get about four vertical bands which alternately display well and gray stripes. The gray area shows the message "we're sorry, but we have no maps at this zoom level for this region." Zoom does not get rid of the grey areas.

  I had this problem for over a year and work around it using MS Internet Explorer or Google Chrome which works Ok. Otherwise, Firefox works great and I use it for everything except Google Maps.

  I tried an uninstall of FireFox and then reinstall, but it did not help. I don't remember what I was doing when this problem is first presented.

  Looks like you have blocked images from http://mt1.google.com/

  See the problems that cause to not show images

  It is possible that you clicked on 'Block Images' from the context menu in an attempt to save an image.
  See web content, pop-ups, fonts and language settings

  • A way to see what images are blocked is to click on the favicon (Site ID icon) on the left side of the address bar.
  • Click on the "More information" button opens the Security tab of the "Page Info" window (also accessible via "tools > Page Info").
  • The Media of the "Page Info" window tab.
  • Select the first image and scroll though the list with the arrow pointing downwards.
  • If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

• Print jobs from any program in sandbox stuck in the print queue

  HP F2180 all-in-One

  Windows 7 Professional 32 bit

  No error message

  From OS to install native printer driver driver HP

  Do not remember if the problem exists with the native driver.

  Problems with MSIE8 and Firefox 8.0

  A search does not show this issue has been addressed in other positions, dealing with queue/spooler problems: my problem is specific to the time MSIE8 and Firefox 8.0, only.  When I launched a print of one of these browsers, it gets stuck.  When I continue to send, all jobs will accumulate in the queue.  Can I remove the bottom of the list to the top, but remains the last job.

  I have the driver set to give a preview before printing (this print preview works normally with word processing programs, such as Notepad, WordPad, etc.), but after printing with a browser, the progress bar showing that prints the document appears, then disappears... and, further, nothing happens.

  I can get the last task in the queue with several tests on the Windows printer troubleshooting.  Also, I can get the preview before print the stuck document to show if I opened, for example, WordPad, type a few characters in there, then click on print.

  When you print a page from WordPad, pasted from the preview browser now normally work.  So if I hit Cancel for that, then will appear a preview before printing to the WordPad document, and then I cancel that as well.

  How can it be specific times of my browsers, but other programs are functioning normally?  And print from another program dislodges the stuck job?  If it was a browser or another, it would be different, but both at the same time...?

  [edit] It was later discovered that any program that runs under sandbox protection would fail print normally.  Even an editor of simple text exposed the problem. However, other users of the same software protection, do not experience this problem. [exit]

  It was necessary to return to an image at the beginning of the operating system partition, taken before the long HP software installed.  All the installation customization operating system and program after that time was, of course lost and must be redone.

  After that, the printer has failed and was replaced.

  The new printer is fully functional, both for printing and scanning, just boot into the operating system and plug in the USB cable.  After a few seconds, a message '' printer recognized '' appears on the screen - and nothing is more to do.

  It is with a dual-boot in LinuxMint, thanks to the excellent support from the division of the HP printer for a number of GNU/Linux distributions.

  Windows 7 will probably have a native print media, but if scanning support is absent, I do not intend to reinstall the HP software long, but instead of it just run Linux for all printing and scanning support and return to Windows as needed.

  Furthermore, installing Linux shows ink levels, and I don't think that the base HP drivers for MS Windows will do.

• How can I reduce the Zoom level to 500% on a tablet of RT?

  While in the blink of an eye an App, I sometimes put my office in the small window. To make the information in the visible window panes, I make the big impression. The last time, rather than increase the size of 400% in Internet Explorer, I maxed out in Control Panel, to see if she might improve things.

  Unfortunately, the software allows me to enter a Zoom level, which can not handle the display of the Control Panel on my tablet of RT. I can't find a way to reduce the desktop display 100%. That someone know a way to reduce the Zoom level in the Control Panel on a tablet of RT (after he has contributed the most to?) If you can give me the exact key features, or a shortcut, I'll probably be able to...

  It's really great to be able to monitor different Desktop/Internet applications at the same time, while I use another application in the larger window. I can't find another Tablet that comes close to doing. However, I need help to fix this bug. I DON'T want to reinstall the operating system. I really hope that I can avoid it.

  Thank you!

  PS. my tablet is not material which will be display on an external monitor port.

  Are you talking about the DPI setting in the control panel (example of photo here)?
  If so, you can adjust it in the registry.  It is stored under this key.  You could do a registry import file in Notepad, save it to your desktop RT and double-click on it to make the change.
  HKEY_CURRENT_USER\Control Panel\Desktop
  
  
  
  
  Given that editing the registry is an advanced task, I will try to help you through the sequence of keys:
  1. On the screen of boot of PPP .  Select settings, and then choose the option "make text and other items more or less.
  2. When the window opens on the desktop, press Alt + S (for small/Normal size), and then press Alt + A to apply the change.  Press ENTER to confirm the change.

• How to keep zoom level setting back?

  Zoom level changes every time with the opening page, & I want to keep the already set zoom level, as happens in other browsers like Google Crome.How to maintain the fixed zoom level, to the selected sound level? I tried with add to solve this problem, but the result was not so good. I hope that you will help me... I enjoy FIREFOX... Thank you.

  The Firefox Page Zoom feature makes a domain level by area to save favorite settings level users zoom, there is no default Page Zoom level setting in Firefox, as with some other browsers.

  Try the extension Default FullZoom Level:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/6965

  Or the NoSquint extension:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/2592/

• How to change the default zoom level and make it persist?

  My computer uses Vista 6 and IE 8.  The default value for the zoom level is 0.  I have to manually change to 80 and my change is not persistent.  How can I change the zoom to 80 level and make the value persists?  Note - under Internet Options, advanced, accessibility, "Reset the zoom level for new windows and tabs" is not checked.

  The DPI setting always displays 0 or 100% zoom, even if you use the custom settings of the zoom displays 100% from there.

  Unless I'm missing something?

  But there still make the text smaller really made a lot of meaning for me in any case, I find the default 125% even small and use the status bar and its 140% zoom page as well :)

  You can even check to see if your resolution is on he recommended setting to match the size of your screen.

• Error "the network card experiences driver or hardware problems" and "To ensure that your Internet protocol bindings are Correct" on Dell Inspiron 530

  Original title: 'make sure that your Internet protocol bindings are Correct (DELL Inspiron 530 Intel 82562V and Desltop)
  
  I'm doing tech support for the family and I'm stumped. They had a Dell 530 with an Intel 82562V-2 and is no longer connected to the internet.

  ipconfig/all statements

  Hostname...: wayne-PC
  Suffix main DNS...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  That's all. Windows gives errors two errors:

  (1) the card network knows of driver or hardware problems

  (2) check that your Internet Protocol connections are Correct

  I installed the latest Intel drivers and TCP IP settings are checked for V4 and V6. I even went as far to install a new Dynex Ethernet card that gets the same mistakes.

  I even tried the netsh reset ip and netsh winsock reset command. I have no idea what to do next. I searched glasses and found similar problems with the same model of Dell and card, but they have been fixed by rebooting.

  Hi MButIer,

  -How long have you had this problem?
  -Was any change in software because the computer before the show?

  Follow the steps mentioned below:

  Step 1:

  Temporarily disable the antivirus software (and any other security software) and the firewall on the computer as a test. Once disabled check if you can connect to the internet without any error.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you enable the antivirus software, other security and firewall programs.

  Warning

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

   

  Perform a System Restore to a point before the show and check if this solves the problem.

  See also:

  System Restore: frequently asked questions

  If the steps above do not help, the best would be to get in touch with the Internet Service Provider (ISP) for assistance.

  Hope this information helps.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Selective T61 with internet programs?

  I have a lenovo T61 Intel Core duo T8300, 3 GB, Windows XP installed.

  Everything works fine except that I get no connection when you are using firefox, update AVG, Ad-Aware, GG client, torrent, managers even lenovo registration program!

  However, I can use the Explorer internet and yahoo messenger. I am able to use my thinkvantage updates when I connect to the office, but strangely, it does not work at home.

  I am able to get a connection wifi and ethernet, in different places, so I guess there is no prob with my hardware. I currently use zone alarm and helped those programs as exceptions, but it still doesn't work. I also tried to disable the windows firewall and uninstall zonealarm, but this has not yet resolved the problem.

  I have not seen a similar problem addressed by internet. I'm not too good with computers, so I really hope someone can help out me

  Thank you!

  Problem solved!

  It took a few tries to remove NIS. I had to download a norton removal tool to remove it. All internet programs are now working. I'm not too comfortable relocation NIS however...

  Thank you!

  Centex wrote:

  "One thing I could have overlooked is to remove norton internet security that came pre-installed with my laptop." I'm removing it now... »

  Ok. Let us know what happens.

  In the past, I had trouble with Norton Internet Security blocks access to the Internet for some programs and tells me not. Like what is happening to you. I had to uninstall Norton Internet security, and then reinstall it. I think that has happened twice.

  I got so tired of Norton Internet Security, which I removed it from all my machines except the one machine that I use for e-mail.

  Centex

• Change the default zoom level?

  I am using Camera Raw 8.3. Landscape pictures open to a zoom level default of 33.3% with CR maximized to full screen. I prefer to work with the zoom level of 25%, so I have to change the zoom level on EACH photo, I proceeded, and it's a step, I want to eliminate them.  MY QUESTION: Is it possible to change the level of zoom to 25% by default, so the zoom level is 25% automatically when I open an image in Camera Raw?  Please tell me there is...   Thank you.

  There is not a way to change the default zoom level in Camera Raw.  All images open by default in the view to adapt, and that real zoom level will depend on the size of the window and the size of images.

  However, if you are working on a group of images, you can quickly set each of them to your zoom level (25%).  Here's how: open images in Camera Raw.  The images will be displayed on the left side of the film.  Select all the (Cmd - A / Ctrl-A).  Then choose 25% from the context menu to zoom (bottom left of the ACR dialog box).  This will set the zoom level to 25% for all selected images.

• Same zoom level for all documents in mosaic

  So I looked the easiest way to switch between several documents in Photoshop, never knowing that he was right under my nose:

  Windows/organize/tiles

  .. I can't believe the answer was here all this time lol.

  The only problem with that is that when your documents are all tiled, some are zoomed closer than others - some documents it is difficult to distinguish. Is it possible to have all docs out tiled so that they "coincide the tile", that's why showing us the entire document in its mosaic? (Like "View / Fit on the screen ')... If there is no way to do it maybe there is a way via script?

  I searched for a way to set the zoom level for all open documents at the same level (put them all to 50% for example). This could at least be a start and then I'm sure I could implement. Haven't found anything useful at the moment...

  Which version of photoshop and the operating system are you using?

  If you set one of the tile documents together to desired zoom level and then go to window > Arrange > Match Zoom, made

  It works?

• Table of contents links keep current zoom level do not zoom to full page

  When Indesign creates tables of contents, they automatically connect the paragraphs, links point to, so that in an interactive PDF, clicks and prods take the user to this page. Large.

  Is what is not so great that hypertext links / references / jump-links / whatever born behind the scenes within the table of contents seem to be:

  1. .. .be is automatically set to reset the zoom to width full page
  2. .. .not be changed somehow

  Normal cross references keep the level of zoom that the user chose and normal hyperlinks that point to a page in the document have a range of settings on this change of zoom level (if any) must be imposed on the user, which can be set to "inherit zoom".

  How can I set up a table of contents bothering users by resetting their chosen artitrary default zoom level when using the interactive table of content?

  I really hope that I don't have a gap table of content feature Indesign and create all the cross-references manually.

  (edited) So it turns out that you can "expand" a table of contents by copying and pasting - it fills the hyperlinks with links that can be edited (as above), but the auto-update breaks - there are a table of contents, they are just one block from text full of links. (I got different copies mixed up when I thought that the framework that the editable links was also-automatic update)

  Aging out of the links is a red herring, just something to do with the fact that they were on a master page.

  This means that a possible OCD workflow is:

  • Create a table of contents on the pasteboard somewhere.
  • Before finalizing the document, to update the table of contents and alt-do drag the table of contents 'live' creates an editable of 'dead' copy in a suitable place in the document
  • Change the properties of the links links in the 'dead' copy (remember that you can select several hyperlinks at once by holding down the SHIFT key and change things like the Zoom all at once with the hyperlink Options setting from the context menu of hyperlinks).

  Then if you make further changes to the document later, remove the copy dead, update and re - copy the live original and redo the changes to the new copy

  This isn't a bad way - it adds just on the work of a minute, each time you export a PDF file (delete and update TOC, alt drag, shift-select the new batch of.) XXXX links at the bottom of the hyperlinks Panel, > hyperlink, Zoom setting Options > Inherit Zoom, actually).

  Otherwise, you may build manually to a table of contents using cross references, if you want the links to the exact position on the page, not just the top of the appropriate page.

• Set the zoom level

  I use a version of Adobe Reader X 10.1 on Windows.

  I put the zoom level in the preferences. Display of the page. Zoom to 100%. I save it. I close the PDF that I consult. I open the PDF file. The PDF file appears in the zoom level, 72.3%.

  Why is it so difficult to get the right for Adobe Reader? This problem has persisted to all versions of Adobe Reader, I used because the product was created. It's not rocket science, the Adobe developers. Do you think that you can get this correct before the end of the Earth a few billion years down X on the line.

  Eddie

  If you open a document that you have seen before (and I can really see how it would be frustrating to have to keep resetting the zoom in this case), there is an adjustment, you can do. Go in Edition > Preferences > Documents and select Restore last view settings, when the reopening of documents. This affects only reopened the documents, not open but I think it works even with files that are no longer on the list of recently used files. This setting will remember your configuration level and the Tools/pane zoom bar, at least, a moment to another. I can't swear that it replaces a creator-set default zoom, but it might be interesting to try.

• Image Viewer does not offer native zoom level unless layout.css.devPixelsPerPx is set to 1.0, which makes all the tiny interface.

  Asked me to shake my question in one sentence, so this is.
  Image Viewer does not offer native zoom level unless layout.css.devPixelsPerPx is set to 1.0, which makes all the tiny interface.

  DevPixelsPerPx is - 1.0 by default, which causes Firefox to scale with the parameter of the BONE, which is perfectly fine. The problem is that it causes also open image files and especially the zoom level, nationwide also identical to the user interface. A zoom level is adapted to the screen, the other is native. (One is a magnifying glass with a '+', the other a '-'.) Or rather, the other * should * be native, but in practice, it is not native, is climbed by the setting of the BONE, making it as arbitrary and fuzzy like any other level of zoom, which defeats the whole point and does not allow access to a native scaling in any reasonable way.

  If you want to experiment, here is something you can try, a bookmarklet that inserts a 'Native' button on the page. It takes into account your level of "net" zoom current and reduced the image natural dimensions.

  (1) select and copy the following script:

  javascript:var btn=document.createElement('button'); btn.style.cssFloat='right'; btn.appendChild(document.createTextNode('Native')); document.body.insertBefore(btn, document.body.firstChild); btn.addEventListener('click', function(){var img=document.querySelector('img');img.style.transform='scale('+(1/window.devicePixelRatio)+')';}, false); void 0;

  (2) right-click a task on your bookmarks bar or, if you do not display this bar, click on the bookmarks menu button and right click a place there, and then click new bookmark

  (3) paste the script in the location line

  (4) assign a name like native, and then click Add a bookmark

  While you look at a picture, click the bookmark (let) to inject the button. Then click on the button to resize the image.

  Success?

  If you change the zoom level of the 'page', click on the new button to resize it due to the change.

• How can I make a permanent change in the zoom level?

  I want to know how I can make a permanent change is the zoom level? I don't want to constantly have to change the default value of 100% whenever I go to another page. Thank you.

  Hello

  You can also use the NoSquint add-on to change the zoom level by default for all websites at the same time. After setting your zoom level, you can adjust the zoom on different sites and set the options for NoSquint remembers the settings for each site.

  After installation of NoSquint, go to the Add-ons page to define the settings for each site:

  • Tools (or

    

    ) > Addons > Extensions

  • Click on the button 'Options' of NoSquint