ZTE A2107A-F would not start - how to reset the PMU?

Similar Questions

• Dell Dimension E521 Setup - locked out of installation, do not know how to reset the password

  Hello. I have a problem with my Dell Dimension E521.

  On the Setup screen when I press F2, I added an administrator password in the security field.

  I thought I knew the password, as I had written somewhere, but I can't.

  I don't know how to reset the password - it told me to remove the admin password by entering a blank password in the new and confirm

  password, but it won't let me move down.

  Can someone give me directions as to how can I reset my password without having to re - install my OS again? Thank you.

  My computer specs:
  Model: Dell Dimension E521

  RAM: 2 GB

  Model and the speed of the processor: AMD Athlon Dual Core 2 GHz

  OS: Microsoft Windows Vista - Home premium (32 Bit edition), service pack 1

  Locate the password jumper 2 pins (PSWD) on the system board and remove the jumper to clear the password.

  It is located next to the PCIe location.

• How to reset the clock?

  New on this computer, may not know how to reset the clock... not come to book with this refurbished.

  Please click the button solved it next to the answer that solved your problem of Firefox support, it appears when you are connected, so this thread is marked as resolved to help other users who may have this same problem.

• My Live View would not start or start...

  Had this problem until I saw all of a sudden screen cleared and I could not start no matter how hard I pressed the buttons. In order to reset I took it to the store I bought. The display took the piece and after almost 2 days he returned saying that COMTEL would not cover up for accessories. I called the service center and asked how when offers a limited warranty, they are supported. This gentleman had no answer, but that he would accept neither of my room. Instead he suggested me to get a replacement from the store, I bought. As we were talking about the issue, the display has tried to load my mode live view and the red light on to my great surprise, which indicates that it worked. Then he started to initiate and work. When I got home, I got to know the mode Live View has had an update, I did. 2 months after there was no question too... But still today, after a full charge, it would not start again. I tried to plug into my laptop to update the software, but my laptop indicates that the USB malfunction, indicating that the Live View mode is a.

  I don't know what to do... I love my Live View... Its great use while driving, on a session and in places outside, where the silent noise your cell phone ringing...

  But, I think that the problem starts, if we have to charge the unit. Which could be considered if you are developing a software update for the same.

  Sorry to be too eloborate... Thank you for your time.

  First of all - welcome to the forum!

  Where are you from and how old is your LiveView? All the accessories are getting 12 months warranty on most of the markets (6 months in some markets).

  It might be that the service contracted by your dealer Center isn't HVC (high volume Center). They should, however, help and if so send the LiveView to a service center that allows to fix it.

  You can try to contact local support Office and ask for a service center that can fix your LiveView.

  Click on this link: http://www.sonymobile.com/gb/support/contact-us/

  Be sure to choose your country in the drop-down menu for the displayed correct phone number.

  What do you think on this forum? Let us know by doing this small survey.

• Equium A100-147 would not start

  Equium A100-147 would not start. Only the lights next to the CapsLock F10 F11 keys are on. When the switch is pushed the lights disappear back only after about 15 seconds.

  Help, please.

  Disconnect the power adapter and remove the battery. After doing this press the power for 30 seconds. Wait a few moments, connect the power adapter only and try to start your laptop.

  What happens when you do this?

• Satellite A660/0MR - upgrade after RAM, Windows would not start

  I have expressed in this thread: http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=228520#228520
  But having a slightly different model (A660/0MR). Same question.

  Improved from 4 GB to 8 GB. He would not accept any 4 GB sticks at all (I tried 4 different 4 GB sticks in all - all of the correct sticks) and operation in other machines. BIOS would recognise them, the BIOS is the latest version (1.80), but windows would not start.

  Any suggestions?

  Hi Farreg,

  What new RAM modules you tried exactly?
  Is it pretested module RAM Toshiba from an authorized service provider?

• Recovery of satellite m30x-155 DVD would not start

  Hello
  I got a satellite m30x-155, I'm doing a restore of windows, the problem is the dvd drive would not start, I tried the instructions start cd\dvd first ac bluged, one got any idea what should I do?

  Hello

  You must press F12 on startup in the start menu. Select CD/DVD and then Notepad will start on DVD player.

  If it still does not respond, your recovery disc may be defective.

• Satellite A - USB issues and would not start

  It started with my computer (laptop) from freezing. Then my USB mouse leave, make me use this tablet (I hate that seriously), then the computer would not simply start so I removed the battery, the computer starts, and then it froze again, put the battery back in, computer started again. Things continue to go.

  Today, I got the Toshiba (my baby) at Staples (free checking up), they found nothing wrong. Got home, starts very well - the 1st time, I tried to reinstall my USB mouse and quess what - would not start. Out the battery, and here we are.
  Oh and by the way - I would like my rear USB mouse - I said "I hate this tablet.
  Battery has been for about 2 hours now without any problems

  Can anyone HELP?
  Thank you

  What computer Satellite phone do you have?

  Have you tested without USB mouse? Maybe this is causing the problem.

  And have you tried a BIOS update? You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

• Uninstalled emet but after the applications would not start.

  Uninstalled emet but after the applications would not start. Internet Explore tries to start but flashes and disappears, even with Excel. Word starts but gets an error when you try to save. Lucky got Google chrome from another pc and installed so I can at least access the internet. Reinstalled Explorer, office repaired, cleaned the registry, but still no start. What should I do?

  A moderator has moved this thread to the programs Windows of Feedback Forum Forum.

  tried, nothing worked so I uninstalled office and re-installed from disc. Explorer 8 still does not work, but I uninstalled a with explore 7 updates and automatic update started and explore 7 worked. Thought I'd try installing explore 8 new. It worked, even if it failed with the Download Manager. Now all back to normal. I would be careful about the use of EMET, unless you know exactly what you are doing. Not a lot of faith in either the Download Manager.

• I have a Dell Inspiron with windows XP and I can not start. I have the windows disc but do not know how to clean and reinstall. Please help me

  I have a Dell Inspiron with windows XP and I can not start.  I have the windows disc but do not know how to clean and reinstall.   Please help me

  You can repair XP or try the following:
  http://support.Microsoft.com/kb/917964
  http://support.Microsoft.com/kb/307545

  TO

  Re - install http://support.microsoft.com/kb/978788

• I have nothing on my screen except the window side bar same not start how he back?

  I have nothing on my screen except the window side bar same not start how he back?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• December 15, 2011 updates to Windows Vista. After that automatic download and install on stop, my computer would not start up

  Original title: 15 December 2011 update of Windows Vista

  After that automatic download and install on stop, my computer wouldn't boot. I had to run Startup Repair 2 days in a row and remove the updates. They are always there to be installed when I stopped. Help, please!

  Hello

  I suggest you to see these steps:

  Step 1:

  I suggest to reset Windows Update components and follow step 2.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2:

  After reset, you will find that Windows 8 or 9 update that must be installed.

  Try to update one by one and check.

• my laptop does not start and gives me the error, load the required DLLs for kernal

  When I went to start my computer would not start and just says load needed DLLs for kernal and communicate with my support. I don't know what the problem is or how to fix it. It was working fine when I finally stopped him. any help is greatly appreciated

  Hello

  Method 1: Please follow the steps mentioned in the article mentioned below:
  Error Messages When you start your computer if Program Files of Windows are missing or damaged:
  http://support.Microsoft.com/kb/812450

  Method 2: How to perform an upgrade on the spot (reinstallation) of Windows XP:
  http://support.Microsoft.com/kb/978788
  Note: This could result in a loss of data on your computer; It is recommended that you back up all important data on the computer before performing this operation.

• NB100 no usb not power - how to reset

  The NB 100 has 2 usb ports on the right side. I tried plugging in an external cd drive and got a box with red indicator of the background task bar indicating something on the device of drawing too much power and that the supply would be stopped.
  Since then the usb ports 'appear' dead. Nothing I plug is recognized by the NB100.

  It is said in the user's manual if it is found an overload of the power to the usb ports can be stopped. However, it does not say how to reset ports IE power to 'em.

  The card reader and the usb port on the left front work yet.

  I tried the update of the BIOS to the latest 2.10, affecting all the parameters of the default bios with F2 at startup and even bought "Device Driver" to make sure that all drivers are up-to-date.

  Can anyone help? I don't know there is a simple answer but just don't see it.

  Ideally, I would like to avoid having to reinstall XP because I do not have the disk and the hard disk does not appear to have a XP partition.

  Help!

  Hello

  In your case, I recommend to remove the /hub of /controller of the USB port on the Device Manager.
  Simply go to the Device Manager, expand the area of USB controller and remove all the devices that are available in this area.

  After restarting again, the system (Win XP in your case) should recognize the USB ports and the driver must be installed again.
  Then restart once again connect a USB device and check if it can help

  Just for info: USB 2.0 ports provide 500mA so in some cases the external USB device would not detected when this device would need more than the usual 500mA. In this case this device must be connected to two USB ports using a USB Y cable or use an external power supply, as do some USB hubs.

• Equium won't start - how to access the recovery partition?

  Hi, my sister has a 2008 Equium A200-1V0 with Vista 32-bit, that no longer starts (probably due to damage of rootkit virus). It loads the BIOS but then goes to black screen with blinking cursor.

  F8 does not work.
  F2 goes to Phoenix TrustedCore Setup utility. The Toshiba hard drive and a CD-ROM drive are listed in hand and start in the right order.

  Using F12 I can get it to boot from a Win7 64 bit repair disc that I burned using my laptop.

  However, it does not recognize the operating system or any image or restore points (because it is 64-bit) but he will be responsible for command prompt.

  To * guest *, I can launch Notepad and when I click on file / open and double click on computer it shows 4 Hard drives as follows:
  Local disc (c :))
  Data (d :)) 42 GB free of 54.5 GB
  WinRE (e :)) 1.11 GB free of 1.46 GB)
  Boot (x :)) 29.0 MB of free space of 31.5 MB (which is used by the repair disk)

  So the C: drive is listed, but without ability.

  * CHKDSK *.
  CHKDSK c: /r and press return

  «The type of the file system is NTFS.»
  Unable to determine the status and version of the volume. CHKDSK is abandoned.
  Cannot transfer messages saved in the journal of the events with the 50 State.

  * Run TESTDISK *.

  Analysis:
  Size of the partition start end in sectors
  1 P Windows RE (store) 0 32 33 191 89 26 3072000
  2 * HPFS - NTFS 191 89 27 7477 118 1 117051392
  3 P HPFS - NTFS 7477 118 2 14592 190 62 114307072 (data)

  * = Primary bootable
  When you perform a quick search, then P - list of files, the second partition it reports:
  "Cannot open the file system. Filesystem seems damaged. »

  So what I want to do is boot to Windows restore to drive E.

  My question is for Toshiba experts: If F8 does not work how to use the recovery partition?

  Laptop is:
  Part number: PSAF5E-002005KS
  Main features
  -Intel® Pentium® Dual-Core Processor T2310
  -Genuine Windows Vista® Home Premium Edition
  -Drive DVD Super Multi (Double Layer)
  -2 048 (1 024 + 1 024) MB of RAM (667 MHz)
  -15.4 "WXGA TFT display 1 280 x 800

  > THIS ISN'T MICROSOFT, TOSHIBA, AND GOOD PRODUCT DESIGN.
  I really put t know that should do better than to place the Microsoft sticker at the bottom.
  This product key and sticker on it's just proof that you purchased the machine with an operating system preinstalled and legal active OS version. This key belongs to original OS (recovery image) that you got with your laptop and it is not a kind of universal key that you can use for the activation of the operating system if you have made the decision to install the clean version of the OS.

  In General, this key is totally useless. While your computer you've got legal copy and this version, that you can install so often desired. It must not be enabled.
  > So my question still remains: can I recover my Toshiba laptop using this restore partition?
  If you want to recover using the Toshiba recovery image response is not. Cannot start HARD drive recovery facility.
  > Even with a dvd of Windows Vista is genuine, I can't reload the OS
  In my opinion you need make the clean OS installation using the clean installation or order original Toshiba Recovery disk on https://backupmedia.toshiba.eu/landing.aspx disc and install original (already active) recovery image.