1 GB clip remains on after full charge USB...? Next firmware idea of SanDisk inside...

Similar Questions

• After that charge USB ELPH 100 HS does not illuminate

  Canon Powershot ELPH HS 100 maybe peuvent wall loaded via USB (USB A/Mini B) cable, as some phones? He told me to charge the battery. It doesn't seem to be attached to the PC load. I used a Motorola Droid USB charger and connected to the camera with cable USB A/Mini B I briefly turned on and seen the icon of battery charge on the screen and off. A few hours later, it won't turn. I did the unthinkable and fried it?

  You probably empty the battery. Remove it from the camera and use the charger supplied with the camera. The USB port is not a charge connector.

• Satellite P100: Battery is only lasting 10 days after a full charge

  My P100 battery is only lasting 10 days after full charge and then not use it. Is this normal?

  Mike

  Hello

  Yes, it's nothing unusual. My Sat A30 loses the power of the battery for 3 days being off.

  Please consult this document:
  Battery drains 15-20% when it is turned off during the night
  http://support.toshiba-tro.de/KB0/TSB6B01N50013R01.htm

  According to this document, that the battery could lose about 15-20% of the power during the night.

  Greetings

• Problems to start the iPad after the charge.

  I have left the iPad charging outside the area during the night and have had start-up problems. I have a screen black and white and on pressing them and holding the sleep/home button an image of a battery. I release the buttons and finally after pressing the buttons, I get my home screen indicating a 100% charge. Has happened twice in the last few days when I greeted the battery power to reduce to 5%. My question is - this problem occurs when the battery power is authorized to reduce equal to or less than 5% before recharging or is the battery dying and requiring a replacement?

  Without knowing at what age the iPad is, it would be difficult to blame it on the battery dying. I never let my battery get too low before I reload them iOS devices. In fact, I put my Air 2 iPad and iPhone 5s on the charger all night in order to get a full charge overnight. I use the iPad all day at work, so I need to reload or to take the charger and cable with me, I prefer not to do. I prefer to load the day after.

  Why don't experiment you a little and do not let the unit run as low. Maybe that load when it gets to 25% left and see if that makes a difference.

• Lenovo Y 40-80 battery full charge capacity is very low

  I've had this laptop for about a year and recently I had problems with the battery of my laptop.

  For the past two weeks, the battery has been draining to 1% at the thread for the day before, even if it has been fully charged. And I noticed that the battery after fully charging has been lasting less and less. Depending on the settings of Lenovo, the battery can store 11,42% of its original capacity of full load.

  Print screen of Lenovo settings.

  My battery is dead? Is there a way to revive or who should I contact for a replacement?

  (I still have my guarantee)

  Thank you.

  In response to customer relationships of unexpected behavior portable Y40 - 70 and Y40-80 meter battery, Lenovo has determined that the battery meter software is working as expected. The unusual calibre results being reported are the reflection of the battery reaches the end of life.

  Lenovo has launched a CUTTING-EDGE Service to help customers get the battery replacement under warranty, or if more warranty, find a spare from suppliers approved by Lenovo battery. The Service TIP can be found here: https://support.lenovo.com/us/en/solutions/sf16-I0023

  The numbers for Y40-70/80 batteries are:

  Y40 SP / A L13M4P01 7.4V48Wh 4cell IBE (Y40-70/Y40-80) 121500248

  Y40 LG L13L4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500249 replace the 121500251 part

  Y40 CP/C L13C4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500259 replaced by 121500251 of the part

  To determine what battery supplied with your computer laptop Y40, instructions to remove the lower cover can be found in the manual of Maintenance of equipment pdf here. An alternative to opening your system (which do not cancel warranty) is to find batteries using the product/model number located on the bottom cover.

  Thank you

• I often use my iPad when it is plugged in, after full load. Can thus damage the battery?

  Leaving the iPad on the charger when it is fully recharged bypass the battery and that the iPad runs on an external source as most of the laptop? Or is the battery constantly being drained and charged at the same time?

  I often play with my iPad 2 plugged Air (often after full load because I think the iPad is directly using the external power source) and I don't know if that night to the iPad or not.

  No, there is no harm in using the iPad during the charge or leave fixed after the battery has reached 100%.

• To cancel, will I pay half the monthly price remaining (19.99 euros) for the next month half of the full annual price? [was: need to pay the whole price?]

  Hey!

  I come from Germany and I recently bought the subscription for students 'Alle Applications' type a year / compensation mohntly.

  And now, I've read that you can't cancel the membership without paying 50% of the remaining subscription price. What it means

  I need to pay half the monthly price remaining (19.99 euros) for the next month half of the full annual price?

  And now, I've read that you can't cancel the membership without paying 50% of the remaining subscription price. What it means

  I need to pay half the monthly price remaining (19.99 euros) for the next month half of the full annual price?

  Complete half of the annual fee.

  Your contract is 12 months, paid monthly, to cancel the contract of 12 months, you pay the tax for the half of the remaining contract obligation.

  for example if you cancel after 4 months, cancellation fees are 50% x 8 months.

• Is there a way to disable automatic playback during playback of a clip in full screen or a way to see the number of frame of a clip during playback in full screen?

  Is there a way to disable automatic playback during playback of a clip in full screen or a way to see the number of frame of a clip during playback in full screen? Thank you!

  Not that I know of.

  You can always send a feature request: Final Cut Pro--> provide Final Cut Pro Feedback...

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...

• full charge time is how long?

  Full charge time 2 magic mouse is how long?

  Apple says you can get 9 hours of battery life with a load of 2 minutes.   Sounds are encouraging.

• am adding memory when I remove the battery I have to pay in order to get the full charge of her

  am adding memory when I remove the battery I have to pay in order to get the full charge of her

  N ° but see:

  About the batteries in the modern Apple laptops

  Battery Universityy

  Apple laptops - batteries-

  Apple - Batteries

  Extending the life of your laptop battery

  MacBook and MacBook Pro-Mac reduced the speed of the processor when the battery is removed when using an adapter A - C

  Apple laptops-calibrate the battery in your computer for optimal performance

  County of Mac Laptops-determining battery cycle

• W530 full charge capacity is much lower than the nominal capacity

  I have laptop lenovo workstation w530 9 cells. Now it is 4 years old now

  I have observed that rcently that battery so quickly.

  A battery meter reset in settings of lenovo.

  It is said that "the State of the battery is good" and illustrated in green color.

  Full load: 38.34Wh

  voltage 12.26v

  power 9.44W

  Temp c 32

  cycle number 418

  rated capacity is 93.6Wh

  design of voltage 11.1V

  I didn't understand why so load the difference between a full charge and design. Is my battery in very good or need a change.

  Can someone help me please.

  'Good' means that it is unlikely to fail completely soon. Electronics indicates that all the cells work. However, the batteries have a limited life and they slowly deteriorate as they are used and recharged again and again. It is just exhausting. The reset is unlikely to help. The "fix" is to replace. Make sure you get one that is designed for the T430/T530/W530. Previous (T420, etc.) have the same size, but they do not work. Avoid spare ones. I think that they are unwanted.

• After the charge of the desktop, I get a white screen and can't do anything.

  After the charge of the desktop, I get a white screan and can't do anything. It keeps loading of other programs with just the white screan. When I hit CTRL ALT DELETE, my office appeared then disappeared. What can I do?

  Hi David,

  You meet a white screen on startup.

  Step 1: Check if the problem persists in safe mode

  A description of the options to start in Windows XP Mode

  Step 2: If the problem not in safe mode then put the computer to boot.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  Note: follow step 4 to reset the computer to start as usual after the boot process.

  Hope this information helps.

• Need to know the time remaining for the battery charge/discharge

  Hello

  I want to know the time remaining for a battery charge or discharge. I tried battery_info_get_time_to_empty() but it does not return a correct value. Can anyone help?

  This topic is already discussed in this thread:

  http://supportforums.BlackBerry.com/T5/native-development/some-help-with-battery-info/m-p/2240449#M1...

• Why my human task remains open after submission?

  Hello

  you know how I can my human task automatic closing after their presentation in BPM 11.1.1.7 process?

  Each single form remains open after the filing, control passes to the next human task but the form is still there...

  Strange behavior or is normal?

  Thank you.

  Fairlie

  Hello

  If you have customized the autogenerarted send button, please call it managed below the code at the end in the bean.

  Replace taskDetails1_jspx; with the name of your page.

  FacesContext facesContext = FacesContext.getCurrentInstance ();

  org.apache.myfaces.trinidad.render.ExtendedRenderKitService service = org.apache.myfaces.trinidad.util.Service.getRenderKitService (facesContext, ExtendedRenderKitService.class);

  service.addScript (facesContext, "window.close (); window.opener.location.href = window.opener.location.href = taskDetails1_jspx; ») ;

  Return "closeTaskFlow";