10.2 application SSO Server installation problem.

Similar Questions

• Tuxedo 10g release 3: Server installation problem

  Hello
  
  I am installing Tuxedo 10: version 3 of the operating system: AIX 5.3. I am a beginner with this product and I am facing a problem when installing.
  I exported the different variables that Tuxedo must be installed as ORACLE_HOME and ORACLE_BASE.
  But when I tried to start the installation, the installer does not give me the ability to use my ORACLE_HOME (which is defined in the .profile of the user of Tuxedo).
  This is what happened:
  
  ===============================================================================
  
  Click Install set
  
  ------------------
  
  Please choose the game to install to be installed by the installer.
  
  
  -> 1 - full Install
  
  2-Server installation
  
  3-full Client install
  
  4-jolt Client installation
  
  5 - ATMI Client installation
  
  6 - CORBA Client install
  
  7 customize...
  
  
  ENTER THE NUMBER OF the WHOLE INSTALLATION, OR PRESS < ENTER > TO ACCEPT THE default
  
  : 1
  
  ===============================================================================
  
  Choose Oracle Home
  
  ------------------
  
  1 create new Oracle Home
  
  
  Enter a number:
  
  I don't know why I don't have the opportunity to use my own Oracle Home like his show in this document:
  http://download.Oracle.com/docs/CD/E13161_01/Tuxedo/docs10gr3/install/inscon.html
  
  Anyone know how to fix this?
  
  Best regards.

  I would like to consider trying the option 'create a new ORACLE's HOME' and specify/opt/oracle (or anywhere where your database software is currently installed), or, possibly, the/opt/oracle/product, as your HOUSE of ORACLE. If the installer suggests then/opt/oracle/product/tuxedo10gR3 in the directory of your product, you're probably on the right track.

  Hope this helps,
  / By

• Win 2003 Server installation problem

  Hello everyone
  I am trying to install Windows server 2003 32-bit downloaded from Microsoft VLSC of my Microsoft account. I downloaded all available versions and I'm trying to start a server x 3250 M3 of IBM, but without success. The same problem occurs with some of the 64-bit Windows server 2008 too. Does anyone had the same problem? Or some advice please!

  Server-specific should be asked in the appropriate TechNet forum. In the meantime:
  Do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with a third-party burning software (unless you have Windows 7, that allows to record the .isos natively) - as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  6. other hardware components are faulty.

  TechNet forums - http://social.technet.microsoft.com/Forums/en/categories/
  MS - MVP - Elephant Boy computers - don't panic!

• message error in yahoo messenger installation (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem)

  I want to install yahoo messenger on my computer while the installation is the process this error message will appear (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem). What d3d9.dll means? I try to re-intall this applications but same error message appear. Thank you! Any help or advice is appreciated.

  Hi vlademer,

  D3D9.dll is Direct 3D 9 runtime and is located in the C:\Windows\System32 directory.

  Follow these methods.

  Method 1: Follow the steps in the article.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003

  the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003. PFA

  Ranjana,

  Please, review the vminst.log file located in % TEMP and see if we could see related errors.  Otherwise follow the troubleshooting steps below;

  1. check that the guest operating system that you want to install VMware Tools is fully certified.

  2. check that the correct guest operating system is selected

  3. check that the good ISO image is loaded. For more information, see ensuring good ISO image VMware tools is loaded (1003910).

  4. check that the VMware Tools ISO image has not been damaged. For more information, see determine if your VMware Tools ISO image is damaged on a host ESX/ESXi (1004820).

  5. If you are installing a Windows operating system, make sure that you do not encounter problems with your Windows registry database. For more information about the resolution of the problems of register with VMware Tools, see Impossible to upgrade the existing VMware tools (1001354).

  6. If you install on a 64-bit Linux guest OS, make sure that there are no missing dependencies. For more information, see Tools from VMware install fails to start the daemon of guest OS on the operating systems 64-bit Linux with the glibc-common package 32-bit installed (1023185).

  If your problem persists, please refer to: KB VMware: VMware Tools installation problems that are defective in a guest operating system or contact support.

  ~ dGeorgey

• during startup, I get an error message. Your SQL server installation is either corrupt or has been tampered with (could not open SQLEVN70. RLL) how to solve this problem?

  during startup, I get an error message.  Your SQL server installation is either corrupt or has been tampered with (could not open SQLEVN70. RLL) how to solve this problem?

  Thank you for visiting the Microsoft answers community.

  The question you have posted is associated with MS SQL server and would be better suited to the Group Discussion TechNet Microsoft. Please visit this link to find a community that will provide the support you want.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Applications and updates Windows installation problems

  Original title: using windows vista Installer problems and having

  nothing will be installed on a disk and installs very few downloads, windows update tried to install the same 14 updates and they do not know how this can be corrected

  Hi DaroldMILLER,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What applications/programs you install?

  ·         You install updates?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Problem installing programs and applications:

  Method 1: Follow the steps in the article.

  How to solve problems when you install or uninstall programs on a Windows computer

  Troubleshoot installing or uninstalling programs

   

  Problem installing Windows updates:

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• vCenter Server 5.5 silent installation problem

  Our requirement is, vCenter Server 5.5 must be installed in silent mode with its default SQL express database.

  To do this, I am referring http://www.vmware.com/files/pdf/techpaper/vcenter_server_cmdline_install.pdf documentation.

  I am able to do a silent install of SSO and the inventory of service components, but stuck to a vCenter Server silent installation. On the command line, I performed following command to install the vCenter Server. This command should install vCenter Server in silent mode, but it is prompting you to press the next button to continue.

  < snip >

  echo 'Get hostname of the system '.

  host Set = % ComputerName %

  echo% % host

  echo "Installing vCenter Server."

  start/wait D:\vCenter-Server\VMware-vcserver.exe/s/w/L1033 /v ^.

  ' / Quiet/QR ^ ".

  VCS_GROUP_TYPE = Single ^.

  VPX_ACCOUNT_TYPE = system ^.

  DB_SERVER_TYPE delivered = ^.

  FORMAT_DB = 1 ^

  [email protected] ^

  SSO_ADMIN_PASSWORD=password@123 ^

  [email protected] ^

  VC_ADMIN_IS_GROUP_VPXD_TXT = false.

  ' IS_URL = ' https://%host%:10443 ^

  LS_URL = https://%host%:7444/lookupservice/SDK " ^

  VCS_HTTPS_PORT = 443.

  VCS_HTTP_PORT = 80. ^

  VCS_HEARTBEAT_PORT = 902 ^.

  TC_HTTP_PORT = 8080 ^.

  TC_HTTPS_PORT = 8443 ^.

  VCS_ADAM_LDAP_PORT = 389 ^.

  VCS_ADAM_SSL_PORT = 902 ^.

  "/ L * V"% temp%\vCenterServerInstall.log"/ QR".

  < / snip >

  On the command line, it is yet to complete the entire order with all the arguments. On the command line after order is printed with 2 rest arguments are ignored.

  < snip >

  C:\Install > start/wait D:\vCenter-Server\VMware-vcserver.exe/s/w/L1033 /v "/ QR/quiet VCS_GROUP_TYPE = single VPX_ACCOUNT_TYPE = System.

  < / snip >

  Need to know,

  1. How can I perform this installation in silent mode?

  2. is there a any error in my command arguments?

  The 'start' command expects the first agument in quotes for the title. Try

  Start "vCenter Server Installation" / wait "D:\vCenter-Server\VMware-vcserver.exe" / s...

  André

• Xcode Server installation failed (ssl configuration infrastructure)

  After the upgrade to Server 5.2 today, I am unable to start the service of Xcode as a result of a mistake.

  The first time, I tried to implement the service, after having chosen the Xcode application, I was asked to create a service user account Xcode. So, I followed the guests to create a Xcode Server user account.

  Then I saw a message that Xcode Helper should be allowed to make UI script, to which I agreed.

  Finally, a progress bar appears where, apparently, that was under the service of Xcode configuration.

  And then an error stating:

  Xcode Server installation failed (ssl configuration infrastructure)

  Try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  Given that I had just installed the latest version of Xcode previously, I advanced and checked that Xcode launches without problem, and no message appears.

  Then I went to System Preferences > Security & privacy > accessibility and verified that an entry is added for Xcode Helper, and I checked the box next to it to allow access.

  Also, I have advanced and connected to the server of Xcode user account and used the fast user switching option to return to my main account.

  Unfortunately, trying to start again service results in the same error. I even tried to start the service when you are logged on the server of Xcode user account. Whenever it has failed with the same message.

  Whenever I try to start the service, I see this (or very similar) message sequence struck the system log:

  20 September 15:50:36 servermgr_xcode Server [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 10;

  currentPercentageCompleteRangeMinimum = 10;

  currentStep = 'Xcode stop server';

  percentComplete = 10;

  status = running;

  }

  20 September 15:50:37 Server servermgr_xcode [867]: task completed (State 0)

  20 September 15:50:37 Server servermgr_xcode [867]: stderr output for the job:

  (4 / 6) [START] stop nginx daemon

  (3 / 6) Server [START] stop API

  (1 / 6) [START] stop CouchDB

  (6 / 6) [START] stop builder

  (5 / 6) [START] daemon stop control

  (2 / 6) [START] stop repeat

  (5 / 6) [END - 0.05 S] Stop control daemon

  (1 / 6) [END - 0.05 S] Judgment of CouchDB

  (2 / 6) [END - 0.05 S] Stopping repeat

  (3 / 6) [END - 0.05 S] Stop server API

  (4 / 6) [END - 0.14 S] Stop the nginx daemon

  (6 / 6) [END - 0.16 S] Stop generator

  A successful!

  Total time: 0.32 seconds

  20 September 15:50:37 Server servermgr_xcode [867]: launch/usr/bin/xcrun xcscontrol - initialize - build-service-user xcodeserver

  20 September 15:50:37 Server servermgr_xcode [867]: wait for task to leave

  20 September 15:50:37 Server lsd [961]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server sudo [1422]: root: TTY = unknown; PWD =; USER = nobody; /Applications/XCode.app/Contents/developer = / usr/bin/file COMMAND

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: running (4/29) xcode-selector - /Applications/Xcode.app

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: integration of control to prepare (9/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (11/29) setting up the config for Redis file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (12/29) setting up the config for CouchDB file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: launchd jobs (13/29) system configuration

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (14/29) creative group for users of service if required

  Note : There was a lot of posts like this that I missed:

  20 September 15:50:38 syslogd server [69]: notice of Configuration:

  ASL Module 'com.apple.AccountPolicyHelper' claims the selected messages.

  These messages may not appear in the standard system log files or in the database of the ASL.

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: configuration record (16/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: users of creative services (17/29) if necessary

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: infrastructure configuration of SSL (18/29)

  20 September 15:50:39 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "Configuring SSL infrastructure."

  percentComplete = 54;

  status = running;

  }

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  20 September 15:50:41 Server servermgr_xcode [867]: xcscontrol reported progress: FAILED (18/29): configuration of SSL infrastructure

  20 September 15:50:41 Server servermgr_xcode [867]: task completed (Status 5)

  20 September 15:50:41 Server servermgr_xcode [867]: stderr output for the job:

  (1/29) [START] make sure Xcode is accessible

  (1/29) [END - 0.20 S] Make sure Xcode is accessible

  Audit (2/29) [START] version of Xcode is supported

  (2/29) [END - 0.00 S] Check if the version of Xcode is supported

  Developer mode (5/29) [START] if necessary activation

  [START] Running (4/29) xcode-selector - /Applications/Xcode.app

  (29/3) [START] check if the server version is supported

  (3/29) [END - 0.02 S] Check if the server version is supported

  Data directories (6/29) [START] creation by default (if they are missing)

  (6/29) [END - 0.00 S] Creation of data directories by default (if they are missing)

  (7/29) [START] create a symbolic link to the current path of the Xcode application

  Access to the repository (8/29) [START] HTTP configuration

  Integration of control (9/29) [STARTED] preparation

  Access [START] SSH configuration repository (10/29)

  (8/29) [END - 0.12 S] Access to the HTTP repository configuration

  (7/29) [END - 0.12 S] Create a symbolic link to the current path of the Xcode application

  (10/29) [END - 0.12 S] The access to the repository SSH configuration

  (11/29) [START] establishing the file config for Redis

  (12/29) [START] set up the config for CouchDB file

  (13/29) [START] Setup launchd job system

  (5/29) [END - 0.16 S] Enabling developer mode if necessary

  (9/29) [END - 0.23 S] Preparation of control integrations

  (11/29) [END - 0.16 S] Setting up the config for Redis file

  (12/29) [END - 0.20 S] Setting up the config for CouchDB file

  (13/29) [END - 0.20 S] Launchd jobs system configuration

  Group creation [START] (14/29) for users of service if required

  Saving configuration [START] (16/29)

  (15/29) [START] configuration CouchDB to use all cores

  (14/29) [END - 0.02 S] Creation of service if required users group

  Users of creative services [START] (17/29) if necessary

  (4/29) [END - 0.41 S] Running xcode - select - switch for /Applications/Xcode.app

  (15/29) [END - 0.08] Configuration of CouchDB to use all cores

  (16/29) [END - 0.33 S] Configuration of the recording

  (17/29) [END - 0.52 S] Creation of users of the service if necessary

  Configuration of SSL infrastructure [START] (18/29)

  (18/29) [END - 3.03 S] FAILED: SSL infrastructure Configuration

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Total time: 4.13 seconds

  The service initialization error: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  20 September 15:50:41 Server servermgr_xcode [867]: response: {}

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  status = 1;

  }

  20 September 15:50:41 com.apple.xpc.launchd [Server 1] (com.apple.dt.XCSDeviceService [1417]): Service not out 5 seconds after SIGTERM. Sending SIGKILL.

  20 September 15:50:42 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "FAILED: SSL infrastructure configuration ';

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  percentComplete = 54;

  status = FAILURE;

  }

  This article is interesting:

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  No prompt was displayed at this time. I had to see a real Keychain prompt? In any case, this article seems to be the cause of the problem:

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Help to get the Xcode service backup and race would be much appreciated!

  I had this same problem. I typed in the following in the terminal:

  sudo /applications/xcode-beta6.app/contents/developer/usr/bin/xcscontrol--reinitialiser

  After the reset, I tried to enable the server to Xcode from the macOS GUI server and it worked

• NEITHER Application Web server refuses to be activated

  I am trying to deploy a web service in LabVIEW 2010 and it fails to deploy in saying that the Web of Application service OR work...

  If I connect to http://localhost:3580, log in as Admin (empty password) and click on the page of web servers. I put the server to Application Web 8080 port, click on the check box turn on... then click apply - and the only thing that happens is that the browser displays the error on the page symbol in the status bar... There is not 'yes', showing next to the Enable checkbox for the web server of the system...

  So - if I start again from zero and do the same thing, but also click the 32-bit option button before hitting the button apply - what is happening? Well, I get an error dialog box:

  

  The service itself (32-bit, 64-bit is registered but not also started) runs according to the services control panel...

  I'm stuck... If anyone knows what is missing here, is there something I am doing wrong, or something that must be done before activating the application service?

  Uninstalling and reinstalling 32-bit LabVIEW 2010 on two different computers revealed that the problem appeared only on my Vista 64 bits - not the Windows 7 32-bit macine macine...

  By looking at the services that are running on the machine with the problem that I could see that he was running the 32-bit version of the application Web server, had a 64-bit installed but disabled--but--only the latter has been fixed to depend on the Web Server service of NOR. This seemed a bit strange that the 32-bit version on the 32-bit computer was dependent on the Web server of OR...

  So - I disabled the 32 bit Server Web Application service OR, turned on the 64-bit... and - I am now able to configure the Web application server to start.

  Why so the 32 and 64-bit application Web services installed, with only 32 bit one running-, but not properly? This happens to everyone, but everyone arranges it by opting for the 64-bit version... or is there something that causes the installation get messed up?

• Standard user account &amp; installation problem (Win7)

  Hello

  Unfortunately, I came across a problem which I think is due to administrative privleges, or lack thereof.

  Currently I am able to connect and print to my printer a HP Officejet 6600, but I am unable to use the scan function.

  On the printer after selection "Scan" and then "computer" it displays "No registered computer" and on my laptop after start-> all programs-> HP-> HP Officejet 6600-> HP Scan I get the error message "HP Officejet 6600." not found

  I ran the "HP print and scan" utility of diagnosis and he told me that I needed to install the software package full of features to use the scan function.

  My problem is the standard user account that I can't install the software.

  I am however able to solve this problem in the administrator account. Can I install the full package of features or even using the Installation Wizard of the software to install & to add/install a new printer (wireless).

  So, here's my question:
  Does anyone know what local security policy or group policy I have to modify to allow users Standard fix this in their account?

  I tried this solution and it doesn't work:

  www.windowsnetworking.com/kbase/WindowsTips/Windows7/AdminTips/Miscellaneous/Allownon-adminstoinstal...

  Thank you for your time and help,

  Alek

  * System plug (if this is important)

  Dell Latitude D630
  Win 7 Pro x 86

  Is Q: there anyway to give some sort of administrative rights with regard to the installation of printers on standard user accounts?

  A: your only choices are the two that I mentioned above.  Disable the standard/UAC user account or run as administrator installation files.  If those who do not work, then check with MS to see what you need to do to get these working wrapper running as it should.

  Q: but to my knowledge, this command deletes all the benefits of the daily duties with a standard account of operation?

  R: you got it.  This is the world of the Administration Windows for you.

  Q: How can I get a standard user account to perform the installation from the CD from HP?

  A: same as mentioned above.

  To my knowledge, anytthing would also require a 3rd party application to serve as a local application broker.  The broker assented request to install and can be configured to evevate some applications/processes to run as administrator by providing credentials of the administrator to the BONE.  For example, we are currently investigating a product called Power Broker to accomplish this task for us on the Win 8 + OS.

  Theres no doubt, the accounts of users of STDS are a pain in the thigh for admins.  Everyone needs to find a way to manage the rights that they give to their users.  HP cannot help you until find you the part of MS. user rights

• VCenter Unattended Installation - problems INSTALLDIR

  I have been using the published PDF which gives powerful assistance vCenter unattended installs the server: http://www.vmware.com/files/pdf/techpaper/vcenter_server_cmdline_install.pdf

  I have this job for the most part, but a part does not work, and I think I have nailed to the INSTALLDIR switch for the individual MSI files.

  For example, this command does not work (it does appear the msi help window):

  $arguments = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite +" INSTALLDIR = "+ $InstallDIR / l * v D:\VCS-INSTALL-LOGS\ssoinstall.log'"

  Start-Process - FilePath "D:\Installs\vCS\VMware-SSO-Service.msi" - ArgumentList $arguments

  However, simply removing the switch INSTALLDIR allows for installation to occur, for example

  ' $arguments = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite +" / l * v D:\VCS-INSTALL-LOGS\ssoinstall.log.

  Start-Process - FilePath "D:\Installs\vCS\VMware-SSO-Service.msi" - ArgumentList $arguments

  The PDF to think that this option is available.  In addition, I tested the switch in place without spaces and without quotation marks, so it doesn't seem to be a character double-quotes/exhaust problem. I am also using quotes and characters for passwords exhaust etc so do that...

  I've confirmed that this is a problem (for me at least) to:

  SSO

  Web client

  The inventory service

  vCenter Server

  Dump of the ESXi Collector

  Syslog Collector

  Any ideas?

  I try this using vCenter Server 5.5 Update 2 installation on server 2012 R2 using PowerShell (4).

  Thank you

  Tom

  For the moment that it is:

  $InstallDIR = "D:\Program Files\VMware\Infrastructure".

  Note:

  1. I also tried with an escape with double quote character in the variable argument (according to the PDF in my original post):

  $exe = "$VCmedia\Single Sign-On\VMware-SSO - Server.msi".

  $myargs = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite + ' INSTALLDIR =------"' + $InstallDIR + ""-""

  2. I also tried with the escape character (') - same result PowerShell:

  $exe = "$VCmedia\Single Sign-On\VMware-SSO - Server.msi".

  ' $myargs = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite +" INSTALLDIR = ""' + $InstallDIR + "" '

  3. I also tried with a path that has no spaces - this works:

  $exe = "$VCmedia\Single Sign-On\VMware-SSO - Server.msi".

  $myargs = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite +" INSTALLDIR = D:\VMware'

  So, who does not point to a problem with spaces/quotes - but I don't know what I'm doing wrong...

  I've added a line if it looks like this now:

  $exe = "$VCmedia\Single Sign-On\VMware-SSO - Server.msi".

  ' $myargs = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite +" INSTALLDIR = ""' + $InstallDIR + "" '

  $myargs = $myargs + "" / l * v D:\VCS-INSTALL-LOGS\ssoinstall.log ""

  Write-Host "command: Start-Process $exe $myargs - wait."

  Start-process $exe $myargs - wait

  The output from the Write-Host shows this:

  Command: Start-Process D:\INSTALLS\vCS\\Single signe-On\VMware-SSO-Server.msi/qr ADMINPASSWORD = Hello! 2 DEPLOYMODE = FIRSTDOMAIN SSO_SITE = VCS - SSO INSTALLDIR = "" D:\Program Files\VMware\Infrastructure "" / l * v D:\VCS-INSTALL-LOGS\ssoinstall.log-attendre "

  The escape character is still there - suggesting that I do not understand how to use it!  I just removed the script and it works, so the controls are now:

  $exe = "$VCmedia\Single Sign-On\VMware-SSO - Server.msi".

  $myargs = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite +" INSTALLDIR = "" ' + $InstallDIR + ' "'"

  $myargs = $myargs + "" / l * v D:\VCS-INSTALL-LOGS\ssoinstall.log ""

  Write-Host "command: Start-Process $exe $myargs - wait."

  Start-process $exe $myargs - wait

  Write-Host now says:

  Command: Panel Start-Process D:\INSTALLS\vCS\\Single-On\VMware-SSO-Server.msi/qr ADMINPASSWORD = Hello! 2 DEPLOYMODE = FIRSTDOMAIN SSO_SITE = VCS - SSO INSTALLDIR = "D:\Program Files\VMware\Infrastructure" / l * v D:\VCS-INSTALL-LOGS\ssoinstall.log-attendre

  Personally, I'm surprised that it works, but it's cool, I'm still learning - I'll try and look a little more information about quotes, spaces and the behavior of the variables when it is passed to a cmdlet.

• In the face of the question then Server installation SOA to put up BPM11g working environment

  Hi all

  I was able to install the Weblogic Server and database, but I am facing problem in SOA server installation.

  I try to install it to run application 11g BPM.

  I saw the same problem has already been answered, but available solutions are not solve my problem.

  Error message: Specify the location of the JDK/JRE when you launch the installer. Invoking the setup.exe with - jreLoc < JDK/JRE location absolute path > settings.

  I tried both way to initialize the installation. IE directly through setup.exe and command line, but in both cases I get the same error.

  He don't ask for path to Java command-line also.

  (a) in my java 7 system is installed.

  (b) I used Oracle Database 11 g instead of XE

  This could be the reason?

  I checked the program files:

  jre7 and jdk1.7.0_45 are here.

  I also set JAVA_HOME in the C:\Program Files\java\jre7 environment variable

  path: C:\Program Files\java\jdk1.7.0_45\bin

  Please help me to solve this because I'm stuck in this facility in recent days.

  Thank you!

  Try running the setup in the disk1/install/win(32/64) folder and then provide the path to the jdk "C:\Program Files\java\jdk1.7.0_45"

  Kind regards

  Anshul

• 10.1.0.3 installation problem

  Hello
  
  I'm having some problems as below:
  
  Environments
  ===============
  Application Server OS - Solaris11
  Repository DATABASE: 11 GR 1 material on Solaris 10
  APPLICATION SERVER: 10.1.0.3
  
  I created repository schemas. Then when I ran the application server installation, I gor the error message below:
  
  Database version must be 9.2.0.7 or more in the... 10.1.0.5, release 9i or higher for 10gr 1 and 10.2.0.2 series or higher for 10 gr 2.
  
  I understand that I can not go any further. Please let me know if any of you have worked with the same configuration.
  
  Thank you
  Monowar Mukul

  Thank you. The required hotfix is 6265268.

• Streets & trips 2013 details download installation problems...

  The installation seems to work, but the program may not be running.  Control Panel verifies that the software is installed (1.8 GB) while the installer has not created an S & T normal ICON and the software cannot be loaded even by clicking on the executable file in the program directory files. I have installed/uninstalled the program several times.  Turned off Norton antivirus and firewall and Windows Firewall protection. Restarted again and again. Nothing has worked...

  -Error message: "cannot find a network share or removable device, the DVD is not in the drive or installing this application is damaged.  Make sure that the drive you installed is attached, the DVD is in the drive, your network is connected, or run the installation again from its original installed location. (5-40003-6) ".

  ANYONE KNOW IF THERE IS A FIX FOR THIS PROBLEM YET?

  Hello

  Looks like you've already discovered the streets and travel Forum.

  Streets & trips 2013 details download installation problems:
  http://social.Microsoft.com/forums/en-us/streetsandtrips/thread/a3c90cf2-ab59-4f82-9404-a8cc0a9b9a05

  Concerning