10 windows and importation of the card does not

Similar Questions

• Satellite 5000 with Windows XP, Service Pack 1 is installed and now my sound card does not work

  Everyone knows this problem.

  I have a 5000 Satellite with Windows XP. I installed SP1 and now my sound card does not work.

  Any ideas out there?

  Does anyone have this problem?

  I reinstalled the Yamaha drive a couple of times and always the same: no sound?

  I bought this unit in Holland and it was great until the problem of Service Pack. I heard that Comcom was a dealer right here. Maybe I'll have to make to them, if I can't help here?

• I have windows 8 and ip4000. The software does not load and it doesn't seem to be a driver for 8 64-bit windows. What can I do?

  I have windows 8 and ip4000.  The software does not load and it doesn't seem to be a driver for 8 64-bit windows.  What can I do?

  Hello

  I had the same problem.  I was able to get around by loading the driver for Windows XP 64 bit from the Canon web site and then install the printer using the normal menu of 'install new printer' Windows 8.  If I remember correctly, I could have gotten an error message or two, but the printer appears in the printer window and ran very well.  Hope this works for you as well.

• "Show my windows and tabs from last time ' does not work in version 3.6.8

  I select "show my windows and tabs from last time ' on the Options window - Panel general"when firefox starts", but it opens as my home page every time I start firefox.

  I tried this on two different computers. Both of them have the same problem.

  It worked fine in previous versions, but it does not work in version 3.6.8.

  If you use delete, search and download Firefox browsing history in Firefox 3.5 and later versions to clear the 'browsing history' the closing of Firefox then in restaurant tabs in the last session ("Save and exit" or "show my windows and tabs from last time ') does not work.

• HP Photosmart ENVY: upgrade to Windows 10 now my SD card does not work!

  I bought my HP photosmart envy a few months ago.  I signed up for the free update to windows 10.  I had no problem until yesterday, I noticed that my SD card does not work.  When I insert an sd card that I know has the pictures, there is no pop up asking me what I want to do with photos.  When I go into my files to find that the external storage device manually there is no such folder showing.  What should I do?  I use my card sd slot all the time and now its useless.

  Hello:

  Please unzip the file in its folder (right click on the file zipped, select extract).

  Then after that he extracted, open the folder and then inside is a different folder, open that then double-click to run the Setup file of blue, then the driver will be installed.

• XI Adobe bought and downloaded from the site does not not after the installation of the automatic update

  I purchased a license through web for xi Adobe & downloaded and installed.  Worked perfectly until the recent update (app was config auto-Update). Now the product does not open, it immediately passes to "not responding" when opening a .pdf file.  I tried to go programs - "fix" without success. I DON'T want to update for DC, as the automatic upgrade has tried to make me do.  I just want what I bought to work! Please notify.

  I have searched all over the support sites and knowledge base, but have not found a solution.  I'm willing to pay for support (although I think it should be on Adobe for trying to move me to a software that I did not ask for!)  But there seems to be NO WAY to access support via phone either.  You are sent through several self-invited, which only direct you to this site. If you happen to get an operator, they EVEN make!

  ANY SOLUTION SOMEONE? In my view, that I've been robbed! Not very practical to sell a product and THEN offer no possibility to use unethical or anything else once you take the $$$.

  reset your preferences - https://forums.adobe.com/thread/1595848?start=0&tstart=0

  (and no adobe help is available via Skype, if someone offers.)

• Windows XP restarts all the time; does not start mode safe mode and last known Configuration does not work either

  Hello! Recently, I installed Wubiand appreciates well. However, a few days ago, when I tried to boot XP on my netbook (EEE PC 1005hab), it restarts just constantly return to the selection screen of the BONES. I tried Safe Mode and last good Configuration known with anything will do. What should I do now? Ubuntu has not stopped working suddenly, so I can't access my data.

  I don't have to have a Windows XP CD, there is something weird Asus recovery instead. In addition, it is a netbook so I don't have an optical drive to run the recovery CD. I'm doing a Livecd of Linux USB so I can back up my data... but I can do but reinstall at this point?

  Thank you.

  The afflicted system has a working CD/DVD drive (even an external).

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu, it has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start pressing the F8 key with more urgency (earlier and more frequently) until you see disable automatic restarts on system failure, and then select it.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Lexmark X 5650 works very well with Windows 7 Home-64, now, color and size of the pages does not work. The ink is OK. Can't find the solution anywhere! I tried Mr. Fixit... Nothing helps

  Have Windows 7 home - 64. Been using Lexmark X 5650 printer successfully several times. Now only print black and white photos.  Also a part of any page I want to copy will be printed, only in B & W.  Sizes does not correctly... and a lot of ink color & black.  Tried all the suggestion of Mr. Fixit, nothing helps.  Help please!

  Did you upgrade or install something before this product?

  How Lexmark support/help/FAQ to say?

• Import from SD card does not store the files on hard drive, but only references to SD card after import.

  Hi - for some reason, files of my card SD imported into lightroom, but referencing only the SD itself card and as files within the usual on my macintosh HD library, of course, when I eject the SD of my iMac, lightroom do not know where the files are more. I tried to delete LR and re-import but the same thing happened. I also saved the DCIM folder on desktop and tried to import from there, but again, it is important files directly to my address in LR, which means that I have to keep my SD card. I use LR for a while and this is the first time that this has happened. I imported the files to another SD card later and everything worked as it should. I really want to make sure that my original files are where they should be on the hard disk and in LR, so I can safely eject my card and not to lose my files. Can someone tell me how to go about this please?

  When you perform the import, you must select the COPY option, and under the Destination on the side right, you must select a location on one of your hard drives.

• Portege R700 - Touch Pad, ecoUtility and presentation of the key does not

  Hello

  I got a Portege R700 with Windows 7 64 bit.
  This machine starts very slowly after the log in user mode only.
  The system is waiting for 1 to 2 Minutes before you can work. In administrator mode erverything is fine and fast.

  Thus our directors thought it might be the Toshiba Software and a lot has been disabled or uninstalled.
  Because this did not help and because I thought that it migt be cause of Kaspersky, I started to reinstalled and update the software from Toshiba. Most of it works now. Shortcut keys does not work, then I start TfcRst.exe via autostart now, even he would somehow it would be better in 'systemecommencent '.

  But still some keys do not work. The Tablet touch power switch, just above the touch pad does not work.
  The Fn F9 works. And the two keys to the right upper corner (ecoUtility/off button and the presentation-Key) do not work. In all three major, I get a pop up saying "this function not taken in charge.

  Anyone has any idea of this?

  Thank you

  Solomon_de

  Hello

  Why you n t try to restore the operating system back to the same state until the administrator has removed or uninstalled the Toshiba Software?

  Generally speaking the VAP (value added package) controls the multimedia keys.
  Also the FN keys require the VAP and Flash memory card Support utility.

  Welcome them

• ID of the card does not

  I am 2.5 TCS and link Framemaker files to my RoboHelp project. In my Framemaker files, I have set up with chains as marker TopicAlias a_add_new_records. These are the strings that are used in the products of our company to call context-sensitive help. (Previously, we were using WebWorks to create our online help, and we have now converted to RoboHelp). In the settings of my RoboHelp project, I configured the marker of a context-sensitive help to TopicAlias. If I understand correctly, this should pull the strings from the TopicAlias markers and use them as ID card so that context-sensitive help will still work.

  However, when I open the map file (visualization < all files on the card > or < mapping project file >), the ID card are there, but they map to a map #, and what we have discovered is that when the developer calls the ID of the card, the correct help topic does not display (it shows the default theme instead) , but if he called the card #, it works.

  Here's the JavaScript function, we developed to call for help (our application is web-based):

  function contextHelp (helpURL, helpContextId) { }

  / / Added the name of the window 'window' so that only 1 instance is created by the user

  If()null ! = helpContextId) { }

  RH_ShowHelp (0, helpURL + "> helpwindow", HH_HELP_CONTEXT, helpContextId);

        } else {

  RH_ShowHelp (0, helpURL + "> helpwindow", HH_DISPLAY_TOC, 0);

  }

  }

  Is it possible to change the function so that we can call the ID card instead of card #? Why is there so much an ID card and a card # mapped on the subject? I tried just copy and paste the card ID to map #s to work around this problem, but RoboHelp will not allow him.

  Thank you
  Jackie

  This can be achieved by directly calling the URL of the help as well as the string MapID system in the following format. RH_ShowHelp() function didn't need to be called.

  "#<>

  for example

  Click here for the Test

  where "Setup" is a card ID

  MILIN

• Why my "display windows and tabs from last time ' does not work?

  Hi all

  I used to have my settings set to "display windows and tabs from last time." For some reason, it does not. Whenever I close my tabs, Firefox warns you me I close many tabs, and when I reopen it Firefox, I only get my home page.

  In the menu options, I put 'windows and tabs from last time' options, and in private life, I have "Firefox will remember history", so I do not think it is related to my settings.

  I saw a thread on 'browser.sessionstore.enabled' must be true about: config, but I don't have even a name preference that says "browser.sessionstore.enabled. Maybe that's the problem? If so, I have NO IDEA how to fix this. I only am not at all computer savvy.

  If someone could find a solution to this very annoying problem, I would be very grateful. If it takes a lot of work of programming/techno, please be VERY descriptive (pretend I'm a 5 year old child in giving directions).

  Thank you!

  Browser.sessionstore.Enabled is no longer used, worry not if you can't find it.

  In case you use "clear history of Firefox closing:

  • do not erase browsing history – which will prevent the restoration of the work session.
  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
  • https://support.Mozilla.org/KB/remove-recent-browsing-search-and-download-history

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, pop-up windows, installation of software, passwords, and other specific data from Web site.

  Deletion of cookies will delete all specified (selected) cookies, including cookies with an exception allowing you want to keep.

  You can check the prefs of . browser.sessionstore * including browser.sessionstore.resume_from_crash on the topic: config page and reset the browser.sessionstore prefs that are correct (in bold) user via the context menu in the default value to make sure that the Session Restore is enabled and functional.

  • http://KB.mozillazine.org/Session_Restore

• Anyone who touches "House" on the cards does not?

  Whenever I hit "House" on the cards of apple, he asks me to update my info on my contact card. But I did over and over again without success. Does anyone else have this problem?

  Restart your Apple Watch.

  1. Hold down the side button until you see the cursor off the power.
  2. Drag the slider to turn off your device completely.
  3. After turning off your Apple Watch, hold the side button again until you see the Apple logo.

  See if that makes a difference.

  If this does not help, the United Nations associate your watch re pair it with your iPhone.

  Instructions here > pairing your Apple Watch and iPhone

• "show my windows and tabs from last time ' does not work after upgrade to 8.01

  After I've upgraded to the latest v8.01 I lost all my tabs sites and even trying to add them and save them with the tools > Options > general > start > when Firefox starts selected have to "show my windows and tabs from last time" she does not hold registered sites and browser restarts it always loses all tabs and shows only a tab with Firefox home Web page. I need to open several sites to work and the only way to do it now is to make sure, I click on the current use in "pages" under General Option of the tools. It's getting very boring because I keep changing my tabs to different sites in a meeting and I am used to simply close the browser, based on making them all back in when you restart Firefox.

  Have you tried to delete the file or move it to another location?

  There should also be a file sessionstore.bak that contains the previous session, i.e. the sessionstore.js file found at the beginning of the current session and is used to restore the previous session via ' history > restore previous Session '.

  Also, make sure that Firefox is closed correctly and that there is not any suspended the process Firefox

• Click right is left and left, to the right does not work?

  I went from the mouse keys functions because the right click was not working and now I can not access anything because the right click on the left button and left click on the opposite side does nothing and the touchpad is HELP back?
  Initially, I was trying to solve a problem of paste copy Grrr

  Hello

  What is the brand and model of the mouse?

  Method 1:
  You can unplug the mouse and re Plug and check:

  Method 2:
  I suggest also make sure that all drivers are up-to-date.
  You can even check the link mentioned to update the drivers below using windows and check updates.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly