10 XPS for VGA projector

Similar Questions

• Recommended solution for Thinkpad Tablet and VGA projectors?

  I ordered a Thinkpad Tablet hoping to use it for a teaching tool, but I face a common problem: most classrooms (and indeed, most conference rooms for business) are projectors VGA.

  I know there are a variety of converters HDMI / VGA (using Active electronic components, of course), but I was wondering if Lenovo recommends a solution or if anyone has first-hand experience (perhaps with the Ideapad tablet, or perhaps with a review of the Thinkpad Tablet model) connect to a VGA projector.

  An extra (a little more specific question), it's the mini-HDMI output provides power to work something like the HP-HDMI-VGA connector. If not, are there drivers to support a USB output device / VGA (which are available for Windows, but uncommon on Android).

  Thanks in advance for comments or suggestions!

  The HP adapter works without external power supply with a warning: the output resolution is the native resolution of the Tablet, which seems to cause distortions on 4:3 monitors and slight overscan issues at least a part is watching 16:9. For my purposes (conferences mathy things), it seems it will work fine, although I will take a piece of chalk tomorrow just in case.

• Satellite of U920T connecting to VGA projector

  Hello, I need to be able to connect my U920T to VGA projector for presentations. I bought a HDMI VGA adapter that works very well for the video but not the audio. Is there a setting I can change to force to laptop to use for the internal speakers rather than via the HDMI?

  > I bought a VGA adapter which works fine for the video but not the audio HDMI /.

  VGA port/cable does not have audio. You can only send video signals.
  To get the audio signal, you must connect the laptop to the projector in addition using an audio cable.
  Maybe you can connect the plug for headphones of portable s with audio projectors IN the port (if available)

• After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue?

  After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue? Thank you

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• HP Pavilion HDMI out how can I connect to the VGA projector?

  I have a new HP Pavilion with a HDMI port Tower Summit and no vga port. What do I need connect my led projector that has only a vga connection?

  Hi Akela2

  You want HDMI adapter / VGA for it:

  http://h30094.www3.HP.com/product/SKU/10464062

  http://www.Amazon.com/GP/AW/d/B007PLL4CK/ref=redir_mdp_mobile?keywords=HDMI%20To%20VGA&QID=1404334963&ref_=sr_1_2&SR=8-2

  http://www.Amazon.com/GP/AW/d/B007PLL4CK/ref=redir_mdp_mobile?keywords=HDMI%20To%20vga%20converter&QID=1402998960&ref_=sr_1_3&SR=8-3

  Thank you

• Connectivity: Sony Vaio Win 8/64 OS HDMI port to the Panasonic PT - LBI VGA projector

  Hai,

  I have Sony Vaio Win 8/64 bit OS laptop with an HDMI port. I bought a HDMI cable / VGA and tried to connect it to my Panasonic PT_LB1 projector which has only VGA slots. When I'm logged in, I don't see my laptop screen on my projector. What could be the problem? Is this a compatibility with windows 8 or the resolution of my projector or what? Do I need to install any special drivers or software written for projector PT - LB1. Can not know. Kindly help me to a solution to this.

  Thanks in advance,

  Sampath Prakash

  Hi Prakash,

  I think that this problem can occur because of a bad connection between the monitors and the projector. I suggest you to use this section of online help and check if it helps.

   

  Connect a second monitor or projector monitor and projector

  http://Windows.Microsoft.com/en-us/Windows-8/how-connect-multiple-monitors

  Also, make sure you have the latest video card drivers installed on the computer. Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Need driver for VGA controller Intel GMA 3600 Series Windows XP Operating system

  Original title: Driver needed!

  How can I get a driver for my VGA (Intel GMA 3600 series) controller for windows XP Home SP3? The device ID is

  PCI\VEN_8086 & DEV_0BE1 & SUBSYS_C629144D & REV_09\3 & 11583659 & 0 & 10.
  My computer is a samsung netbook. Model N102SP

  Hello

  Sure enough. I even downloaded and extract the Windows 7 drivers to see if there is evidence of support for XP, but it was not.

  You can always try to install the Windows 7 drivers to see what is happening. But I expect that the installation routine will check for a valid operating system.

  If you do not experience, first define a point of restoration in the event of adverse...

  http://support.Microsoft.com/kb/948247

  .. then you can come back if necessary...

  http://support.Microsoft.com/kb/306084

  Tricky

• driver for VGA video controller adaptable

  Hi all

  I have configured my computer Inspiron 518 to do a dual boot: Windows XP and Windows 7 originally, it came with Windows Vista , and that's what the machine is registered with.  My problem is I'm trying to update the driver for my video controller (VGA adaptable) for Windows XP but support Dell recommends only drivers for Vista.  How to find and download the drivers appropriate for the OS?  Would appreciate any comments on this problem.
  Thank you.

  If Dell does not have XP drivers, your best bet/bet is to visit the site of the manufacturer of the chipset for a generic driver.

  Check in Windows 7 for the manufacturer and model/chipset in the Device Manager and go to the site looking for XP drivers.

  Tricky

• Installation of Bus SM HP pro controller cant 3300 (xt307ea) he advanced driver for VGA adapts?

  Installation of Bus SM HP pro controller cant 3300 (xt307ea) is there some advanced driver for integrated VGA adapter?

  Hello

  The chipset driver installation to install the drivers for SM Bus controller. Restart after installation

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=20019&lang=eng&OSVersion=Windows%207%2c%2032-bit * & DownloadType

  Try this graphics driver:

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20389&ProdId=3231&lang=eng&OSVersion=Windows%207 * & DownloadType=.

  Paul

• Inspiron 580 or XPS for 24/7 long hours machine running?

  Hi all

  I need a machine that is peaceful and sustainable runs for hours without stopping.

  Inspiron 580 is cheap but is it suitable? Should I get an XPS rather (Phenom or i5?)?

  Thank you!

  Definitely get an 8300, XPS with Core i5.  If you plan to run this computer for a period of lets say for days or weeks, maybe even consider getting a Dell Optiplex or precision Business Office, since they are designed to handle the long hours of continuous operation.

• Can not find the driver for VGA 4.0.5 controller in Device Manager

  I don't know why it appears today.  I can't find the 4.0.5 XP VGA controller driver.

  * Windows Description - video controller (VGA Compatible)
  * Hardware - VEN_15AD & DEV_0405 & SUBSYS_040515AD & REV_00 ID
  * Device category (class) - other devices
  * Enumerator - PCI
  
  * Detected chip Vender - VMWare Inc.
  * Device detected smart - VGA 4.0.5
  * Detected Vender - VMWare Inc.
  * Peripheral detection - VGA 4.0.5
  
  * Status of device - detected, unknown, present indicators, no ghost, visible category

  And also device Base System (Communication Interface Machine virtual VMWare Inc.) too.

  
  * Windows Description - Base system device
  * Hardware - VEN_15AD & DEV_0740 & SUBSYS_074015AD & REV_10 ID
  * Device category (class) - other devices
  * Enumerator - PCI
  
  * Detected chip Vender - VMWare Inc.
  * Device detected smart - Virtual Machine Communication Interface
  * Detected Vender - VMWare Inc.
  * Detected the device - < unknown, id = 0740 >
  
  * Status of device - detected, unknown, present indicators, no ghost, visible category

  Need help.

  Welcome to the community,

  is anything happening to this virtual machine before? For example unclean shutdown...

  I suggest that you try re-installing the drivers VGA and/or VMware Tools.

  André

• UBS for VGA HDTV

  Hi all

  Back a person how to convert UBS VGA HDTV?

  My New $800 Dell AIO 3459 does not have a HDMI output.

  Please answer... Thank you

  How to convert UBS in VGA HDTV

  You can buy a USB VGA dongle or adapter.  You can go to amazon or other online stores to find one, or google "usb to vga adapter".

• Desktop Vista XPS for small business software

  Add Visio software.  What version is compatible?

  Hello Cpetros,

  ·         Are you referring to the compatibility of Microsoft Office Visio with Vista?

  Here is a link from the Vista Compatibility Center that will give you all the versions that are compatible with Windows Vista:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=Visio

  If you want to check the compatibility of the software with Windows Vista, you can check the link below:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with the activation of windows 7

  Hi, my laptop is using Windows 7 starter 32 bit. He saw error and had been repaired once, but still having some questions such as:

  1. cannot install some applications & he said... 'is not a valid Win32 application ".

  2. keyboard Fn key cannot be used

  3. He said that my Windows 7 not genuine

  4. sometimes, can connect to the projector via a VGA cable and sometimes impossible to connect

  5. sometimes the Microsoft Office applications cannot be opened, but sometimes it can be opened

  I have a few questions:

  1. how to make reactive my original Windows 7 starter edition? Since I can remember, technitian which difficulty my laptop had been tempted to reactive my original Windows, but it will be not active & still ask for activation of the Windows operating system

  2. how to fix the keyboard Fn key?

  3. is there need of all drivers to install for VGA projector & to install all the applications that I want?

  4. by setting activation of Windows 7, Microsoft Office can always be opened without any problem?

  Sorry for my English is not my mother tongue. I wish I can get the answer as soon as POSSIBLE. Thank you

  Honestly, it looks that your system needs a new reinstall of Windows 7. It should reinstall applications such as Microsoft Office and drivers for devices such as your scanner, printer. If you wish not to do this, follow these steps:

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  then

  
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow
  This will check for any breach of integrity

  Restart your system

  Also to perform a clean boot and see if things improve:

  http://support.Microsoft.com/kb/929135

  You should also check to see if you have installed any rogue programs:

  Click Start, type: programs and features

  Press enter

  See the list and uninstall programs, you are sure that you may not be installed.

  See also:

  How to speed up your Windows 7 system:

  http://techingiteasy.WordPress.com/2010/01/11/speed-up-your-system-for-the-new-year/

  Regarding the reactivation:

  Try the following:

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  You should also check the updates for your drivers:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Troubleshoot the switch 12 with a projector or VGA monitor Acer

  I connected my Acer Aspire switch 12 to a VGA monitor via a HDMI VGA adapter microphone. The switch 12 sees the second monitor, but seems unable to get a signal to start it. In this respect also disables my wireless and sometimes the mouse as well. I tried the VGA monitor with my MacBook and it works perfectly.

  For me, it's a serious problem, I bought the switch to travel and give presentations in corporate meeting rooms, of which many are still equipped with legacy VGA projectors.

  As a low-power machine, is inherently impossible to connect to a monitor/projector VGA switch 12, or is the problem somewhere else?

  If I had to guess, I would say that the problem lies in the switching on of the conversion your HDMI cable VGA chip. I do not know the specs on the budget for food for the HDMI port, but it is probably marginal for the conduct of the conversion.