100 log scanning handwritten old pages to PDF via HP Officejet Pro 8500

Similar Questions

• Network scanning multi-page Officejet Pro 8500 a w/o ADF (Vista and HP Print software)

  Without using the ADF on the 8500 has, can I scan multiple pages in a PDF file if the scans are done from the PC? How?

  My version of Vista is 6.0.6002 Service Pack 2 Build 6002.

  My HP Officejet Pro 8500 has e-all-in-one printer - A910a is the standard model, for example, the premium product of mid-range. It is connected by LAN cable. It scans, prints and can provide the status of ink level.

  The 8500 is connected via the network, and on a Vista PC, I use a desktop icon to launch "HP Officejet Pro 8500 A910.exe". The new software is very different from the [Photosmart c6150 dead] [uninstalled] old HP Solution Center, and I looked in the new textbooks at least briefly, so I hope someone can same thing me some time with a basic question/issues scan. My research forum has failed, but if someone has a link to a relevant thread, that would be appreciated.

  Without using the ADF on the 8500 has, can I scan multiple pages in a PDF file if the scans are done from the PC? How?

  I also tried scanning browser based and there is a drop down for sweeping on both sides, but the drop down menu is not activated and cannot be used.

  I only went through the configuration of the network folder, which may be necessary to get the ability I want. On this subject, I wonder if I set up a folder for all users, or just for my login.

  Thanks for any help!

  Success?

  Well, I created a folder network and was then able to scan to a PDF file of several page without using the ADF (ADF) documents.  To do this, (1) install the software provided with the Officeject Pro 8500 has, (2) the installation program a network folderand (3) run the scan of the touch screen located on the Officejet Pro 8500 has.

  (1) install the software supplied on CD (or probably downloaded from somewhere near here). You may be able to work with only the web browser interface, but I wasn't before install the software provided on the CD, and I suspect that some software is required on the PC.

  Install the downloaded software or the software provided on the CD-ROM titled

  HP OFFICEJET PRO 8500

  A910

  (2) Setup a network folder. The installation of the software created a few new icons on my Vista PC.  Double-click the icon of the desktop titled "HP Officejet Pro 8500 A910". On my Vista PC, it runs,

  "C:\Program HP HP Officejet Pro 8500 Officejet Pro 8500 A910.exe A910\Bin\HP"

  An application window should appear. Mine has a title, "HP Officejet Pro 8500 A910 (network).

  The application window has a section of Scanner Applications on the left. From there, the scanner to the network folder Wizard. Which can be done by double clicking on the 'scan to network folder Wizard"or by the first double clicking on"Scanner Actions"and on the screen that appears, click on"Scan to network folder Wizard.  Otherwise, you can get this done through the web browser, if you know the URL for your device's built-in web server. Because I use my DHCP router (to allocate IP addresses in my local network), I currently access the 8500 a of http://192.168.1.19/. From there on, I can access the Scan tab, and I can access the ability to "Setting up the network folder" on the left.

  Using the scan to network folder Wizard, I clicked on New and used the Browse button to select "C:\Users\Gordon\Documents\My Scans" to set up a folder named "Gandalf Gordon". The next page of the wizard, it will take your network password (or local password if he is counting on the local PC) required to access the PC where the path "C:\". "sailed above is located. When I clicked on finish, the wizard opens a web browser which indicated a certificate error. I chose to continue to the site, which turns out to be the web server integrated in the 8500 has. So now you know a URL where your built-in web server on your network if you were already uncertain. If you do this URL a favorite browser, the favorite should work even if the IP address of the 8500 a is changed in the future.

  Display (3) initiated a sweep of the touchscreen located on the Officejet Pro 8500 a. tap the icon "Scan." Tap the 'network '. Select the network folder. Place a page to scan on the glass of the scanner without using the automatic document feeder. Press 'Start Scan '. When the touch screen prompts, "Page another Scan", select 'Yes', place another page on the scanner glass and click, 'Start scan '. When the last page is analyzed, answer 'No' to the prompt "scan another Page.

  Note: When loading pages additional manually, you have to work a little faster or unit will then expire and close the file with as many pages that you managed to scan. I did three pages as a test.

  If there's a better solution out there, please share!

• HP Officejet Pro 8500 Premium a scanned PDF files in legal format, but I want letter format

  Hi, I have an iMac with OS 10.7.5 and my Officejet Pro 8500 a Premium makes the computer scans that are of legal size, when well even the original is letter size. I don't see how to change this in the HP utility. I don't have a scanner software, because I was able to install HP. My doc driver does not work either. Any ideas? Thank you.

  Hey @JosieB,

  Welcome to the Forums of HP Support!

  I understand that you encounter, software, scanning and ADF questions on your HP Officejet Pro 8500 a Premium e-all-in-one printer. I would like to work with you today with the resolution of these problems. To make the resolution of the problems I will divide this post into three sections. Each section represents one of your problems. I know that in your message you can set your analysis of the rather than a legal letter and that you use the HP utility by scanning because your drivers and software HP does not able to install correctly on your Mac. I'll also provide you with steps to solve this issue.

  Question 1: The software installs:

  Please perform the steps below to properly install your HP software and drivers for your printer on your Mac OS X 10.7.5 Officejet operating system.

  Step 1: Uninstall the drivers and software:

  Uninstalling the printer software
  
  Step 2: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 3: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 4: Reinstall your software and drivers:

  Please click the following link to download and install the appropriate drivers for your HP Officejet:

  HP full feature software and drivers - OS X Lion v10.7

  If you need installation assistance once the drivers are downloaded, please visit the 2 documents below.

  USB: Install Help for Mac OS X 10.7

  Wireless: install Help for Mac OS X 10.7

  Question 2: Could not parse the format letter:

  Once your software is installed properly your HP or HP Scan utility software parameters must be set correctly once more. Here is the HP document on how to Scan with the HP scanning and software without scanning your Mac computer HP software. The support document also explains how to change the settings for scanning.

  Scan from OS X Lion v10.7 with full software functionality HP for HP Multifunction printers

  Failure help, you can also try:

  1 open The HP utility and select your device.
  2. based on Scan Settings open the "Scan to computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click modify.
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop-down list next to Cultures to and set as letter
  7. click OK and try to scan the image.

  Question No. 3: Automatic Document does not work:

  Finally, in order to get your ADF, work again on your product, that I will give you some detailed troubleshooting steps. Because you have not noticed if you having paper jam errors or that the product just will not pick up paper at all in the charger, I'll give you the steps of troubleshooting for both scenarios.

  One "original jam: clear jam and press OK"Message appears.

  More than one Page at a time is nourished by the all-in-one -please only through 'three Solution: clean the automatic document feeder' of this document.

  Please let me know if the steps I have provided to resolve your problems. Good luck!

• The network file scanned Documents (PDF or JPG) = 0 (OfficeJet Pro 8500 has 910 bytes

  I have OfficeJet Pro 8500 910 has connected to the wired network with domain

  I created a shared network folder with read access to my computer (operating system windows 8 Pro X 64) through IP address of printer

  http://10.181.XX.xxx

  The shared folder has appeared on the screen officeJet and test with success, when I wear analysis on the officejet, the digitized file appeared on the network folder but with of size 0 bytes and does not open even it is pdf or jpg

  I have same door on the other computer is windows 7 PRo X 64 spouse for the same field and scanned documents open succefuly.

  Help, please

  My problem was solved by updating the HP 8500 has the latest firmware

  Thanks for trying to help me

• OfficeJet Pro 8500 a A910a - cannot save pdf in multiple files via touch screen

  Hello world
  
  My problem is that I can't save my scans in multiple files (.pdf) If you use the "scan to file function" via the touch screen on my Officejet Pro 8500 A910a a shortcut. It works when scaning manually from the computer, but I need to work from the printer/scanner.
  
  The only way that the scan shortcut saves each page separately (works the way I need) is when you save as a .jpg file, but this isn't the exit, I need. I search for an .xml file change the shortcuts manually, but have not found one. Since my other printer 8500 A909a can analyze each page in a single .pdf file, it must be a question of settings that the A910a does not offer this parameter directly.
  
  I appreciate any assistance with this problem.

  OS: Windows 7 Home Premium 64-bit

  Driver: OJ8500_A910_1315

  Firmware: OJP8500_A910a_1231A

  Hi RnRMusicMan,
  
  the solution you are suggesting is what I have now and the reason why I even started this thread. Analysis each page separately from the touch screen is a pain in the a * and analysis of PC via a scan profile is not the way to go for me either. Thank you in any case, it seems like it is actually a problem in the software and I have to be careful next time, choose a new printer.

  RnRMusicMan wrote:
  

  Hi Koumack,

  Welcome to the HP Forums!

  I see that you are trying to save your scans in multiple files (.pdf) using the analysis of the function of file.

  That's what I could find in my resources:

  How to perform a scan: from the control panel

  Breast of HP Scan, select scan on a daily basis, and then click Advanced settings, select the file tab and check create a separate file for each scanned page. Click OK. It should work from the software.

  

  Otherwise, even if it may be a longer process, as a work around the printer, you can scan a page using the scanner glass.

  Hope this helps and have a nice day.

• OfficeJet Pro 8500 has more: document scanning

  Several pages to the computer and save it as a file, but now he won't, until Apple upgrades my Officejet Pro 8500 has more opportunity to scan the whole of a scan of the page at a time.

  How to scan a document of several pages under the name of a file?

  Hi @Pinnacleport,

  I read your post and to see that since the upgrade to El Capitan, you are no longer able to scan several copies of a file. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I checked the site and the drivers are installed by the Mac drivers preinstalled. HP printers - installing a printer driver Mac using Apple Software Update.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet Pro 8500 has more)
  
  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  What application are you using to scan with?

  The only way you can save several pages in a single file is in PDF format. JPEG and other formats will save multiple documents as separate pages. In the printing and scanning window, select PDF and check combine in one document below.

  I hope this helps. If there is anything else I can help you, let me know. Thank you.

• HP Officejet Pro 8500 has Plus: HP Officejet Pro 8500 a cannot scan more on the purchase of Mac

  I have not had any problems using the printer or scanner on the HP Officejet Pro 8500 has more when I had my old laptop to Windows 7. There was some HP software installed from a CD that allowed me to open the HP application and adjust the settings for scans, save multiple scans in a single PDF etc...

  Since switching to a new Mac OSX desktop computer, I can't install it whatever that either the old CD from my Mac has no CD/DVD drive. The only application of HP on my Mac is now HP ePrint, and which does not seem to offer something to scan with.

  The other option that have left me is to connect the Mac to the printer by USB, then choose:

  Scan > computer > iMac > save in Jpeg.

  But I get the following error message:

  "Connection error".

  The connection to the computer is down or HP scanning application cannot detect the OCR software. Check the computer for more details".

  What do I need to install, or the difficulty to get the scanner to work on my Mac please?

  Hi Karlos444,

  Unplug the printer and reset the printing system:

• HP officejet Pro 8500 has: print image too large printer cuts the half page out

  My Hp Officejet Pro 8500 has is way big text/image printing and cutting half of the page. How can I fix?

  I've uninstalled and reinstalled the driver, I unplugged and re-plugged, I looked in the settings and do not see where I can change the print size. Any suggestions?

  Hi @lucky33,

  Thank you for visiting the Forums from the HP Support! I see when you print on your HP Officejet Pro 8500 a text is very large, so it prints on several pages. You have tried without success, some troubleshooting steps.

  You try to print a document or an element of a web page? What program or browser you use?

  If you are using a Windows operating system, please try the following:

  1. open an Internet Explorer browser, go to the far right click on the gear icon

  2. Select Print Preview

  3. now along the top, you will see an option to change the size of the page, please make sure that it is set to adjust or 100%.

  4. now, try a test page, the text is expanded?

  Now go ahead and run the HP Print and Scan Doctor:

  -It has been designed by HP users troubleshooting and problems characteristic needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know the results.

• OfficeJet Officejet Pro 8500 has more eAiO Scan to computer scans only part of the Document

  I am trying to scan my Officejet Officejet Pro 8500 has more eAiO scan to my iMac (Mac OS X 10.6.8).) IT scans only part of the document is scanned. However, when I copy it, the entire document is printed. I was looking for, if I could change this on the officet, or the system of preferences on my mac, but couldn't find anything on the 8500. On mac, I could change something, but it was only the scans on insiders from my computer.

  Scanning directly from the Officejet comes in very handy when the digitization of books, with one hand, I have to push it and the iMac is not in reach of the officejet...

  Otherwise, I am very satisfied with the printer and everything works fine...

  Thanks for any help.

  iMac (Mac OS X 10.6.8)

  Hello

  I hope you feel better now!

  Please specify the exect option that you use to scan from the control panel of the device.

  What exect icon are you clicking after selecting the scam?

  If it is computer, try to update the latest version of the driver and check if the Scan shortcuts Manager do not appear:

  Click the Apple icon, then software updated. Be sure to select any update HP available.

  If you don't see the specific option yet, you will need to delete all HP software installed completely and install the latest version:

  * Please note that the following steps will delete all HP software installed.

  1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
  2. Select Applications
  3 select the Hewlett-Packard folder
  4. double-click on uninstall HP application
  5 follow the uninstall to prompt to select a device to uninstall
  6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
  7 approve any prompt to uninstall all HP software.

  Download and install the latest driver below:

  http://FTP.HP.com/pub/softlib/software11/COL34340/MP-85024-2/OJ_AIO_08_8500_A910_Net_Full_Mac_WW_74.dmg

  Finally, update the latest driver by clicking the Apple icon, then software updated.

  If you use another method of scan, please specify which option you use.

  Kind regards

  Shlomi

• OfficeJet Pro 8500 has Premium - problem with printing PDF documents

  My boss has the printer/HP Officejet Pro 8500 Premium has in his office. He had problems with the printing of PDF documents. As a general rule, what print is either unintelligible or will have a black line at the top of many pages, even if it's just a 1 page document. No problems printing on other types of documents, only the PDF files. Is it possible to fix this? Thank you!

  Try the following setting and let me know any changes:

  Adobe Reader, launch the dialogue of the printer.

  Click on Advanced Options at the bottom of the dialog box.

  Check the Print as Image checkmart.

  Click OK to approve and try to print

• OfficeJet Pro 8500 a Fax Copier Scanner has streaks dark on most of the page but exit the printer seems

  HP OfficeJet Pro 8500
  Series # {information}

  CM755A model

  The printer prints using the printer and the output looks fine. However, when you use scan, copy or fax characteristic of the printer, there is gray stripes dark page that covers almost the entire page. Have tried resetting, cleaning all areas and still have the problem. What is the problem? Is there a diagnosis of the printer that I could run? No error code will appear. Any guidance is appreciated - thank you!

  Looking at your attachment, the unit seems to have a bad scanner and must be replaced. If your in the United States, contact the HP support @ 1800-474-6836 to see what alternative options are available

• HP Officejet Pro 8500 has more: I need help to setup windows fax and scan on a network wireless home

  I'm stuck in the box of / address of the fax server in the Windows Fax and scanning configuration wizard. Where can I get this information? I think I can finish with this info.

  Hello

  Windows Fax and Scan allow scanning from Windows, fax of the printer can be done by the HP Officejet Pro 8500 A910 software or Print Fax - printer HP Officejet Pro 8500 A910.

  Windows Fax and Scan to allow fax when your PC is equipped with a fax modem that you can find below:

  http://Windows.Microsoft.com/en-us/Windows/set-computer-send-receive-faxes#1TC=Windows-7

  Follow page 58 of the user guide below to send a fax from your computer using the HP device all in one:

  http://h10032.www1.HP.com/CTG/manual/c02668142

  To receive faxes on your PC follow the section "to set up fax to PC (Windows)" on page 69 of the instructions.

  Kind regards

  Shlomi

• No functionality to scan HP Officejet Pro 8500 A910 on Windows 7

  I got this printer in use for some time. However, the functionality of the scanner is not available.  I tried to uninstall and reinstall the software several times. HPPSdr.exe HP doctor detects the scanner and talks to her and will scans a page of test successfully. But the HP Officejet Pro 8500 icon doesn't show any scanner feature when you click it. The printer works fine.

  The printer is connected by ethernet to my router.

  Anyone know anything about this? I find it very difficult to find more information about this problem.

  Honza.

  Hi Mika,

  Rwmove the software completely by clicking on start > all programs > HP > HP Officejet Pro 8500 A910 and follow the uninstall option.

  Then go to control Panl > programs and features > uninstall a program and remove reminders of the software (HP Customer Participation, Readi Iris OCR, etc.).

  Download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109378-2&cc=us&DLC=en&LC=en&OS=4062&product=4083969&sw_lang=

  Then look for any change when access to the printing software.

  Shlomi

• I'm getting a vertical line in the middle of the page when I use the ADF on my Officejet Pro 8500 a but

  HP Officejet Pro 8500

  Windows XP

  No error message

  No changes to the system

  Scan using the ADF puts a vertical line in the middle of the scanned page.  This does not happen when I scan from the flat screen

  Brian, this is going to be a pretty easy fix. What you're going to need to get is a lint cloth (as a microfibre cloth or a filter coffee) and get just a wet touch. Then, open the top of your printer to reveal the glass. There are two sections, one large, and that is a thin strip of glass on the left side. If the line makes its appearance in the ADF scans/copies only - clean this thin section with a moist, lint cloth.

  This should help you!

  More information here: https://www.youtube.com/watch?v=SPdwUKnrDgM

  Let me know and have a great day!

• OfficeJet Pro 8500 has vertical line from top to bottom after a copy or scanning via adf

  Each copy or scan do using the automatic document feeder to my HP Officejet Pro 8500 a shows a vertical line from top to bottom left of each page. I have cleaned the printer at all parts of the feeder, - nothing dirty in fact found. When I copy or scan the glass plate there is no vertical line on paper.

  Anyone have the same experience with this printer?

  Usually if the scanner works on the dish, but product line in the scans from the ADF, it's because of something on the glass.  Have you tried to shine a flashlight down on the surface of the small approximately 1 in. piece of glass on the left side of the bucket?  This is the strip of glass used for the ADF.

  Like trying to clean the white strip, located on the lid above the glass of the ADF, well clean to make sure there is no debris on the support that can cause this line appears.

  * Make sure that the printer is plugged into a direct socket, rather than a surge protector.  The 8500 has protection against overvoltages integrated in the device and an another surge in the circuit protector can sometimes cause lines.  However, usually this causes lines in both ADF and flatbed scans.

  There is also a document provided by HP with the steps to troubleshoot issues when a line is present in the copies/scans.  The document can be accessed here.

  I hope this helps.