10201 install: application could not start because appHelp.dll missing

Similar Questions

• Unable to locate the Explorer.EXE component, this application could not start because iertutil.dll was not found. Reinstalling the application may fix this problem

  This problem occurred immediately after the installation later microsoft update 02/08/2012

  clearly the result of the last update of windows xp

  Hello

  Try to uninstall and reinstall Internet Explorer 8.

  1-click Start > run type cmd and press enter

  2-copy following order %windir%\ie8\spuninst\spuninst.exe and right-click on cmd window and select Paste and press ENTER.

  3. After uninstallation, restart your computer

  4 - Download and install IE8 from this link http://www.microsoft.com/download/en/details.aspx?id=43

  I hope this helps.

• Error message: Winlogon.Exe could not locate the item. This Application did not start because Comctl32.Dll was not found.

  Update of security hung up during installation. I waited 12 hours for the update complete and nothing happened. Whe I reboot XP P4 syster, I get the Message from messageError: Winlogon.Exe could not locate component. This Application did not start because Comctl32.Dll was not found.

  Re-installed SP3... Installed hard drive then... cloned old drive and new drive... After several updates, it seems to do very well. Tried several programs/operations and seems normal. One day turned but didn't have to build another system or this one back up.  Thanks for the idea.     F

• Error message - "this application could not start because the side-by-side - configuration - is incorrect, when you access programs."

  Hello

  Any help step by step to address this issue would be welcome

  On a Fujitsu laptop running Vista and MS office 2010, when I try to access word, excel, or one of the other programs, I get the following error message - "this application could not start because the configuration - side by side - is incorrect." see the applications for more information event log"

  Thank you in anticipation

  Hi BackrowSteve,

  1. did you of recent changes on the computer?

  Method 1:

  If you are facing the issue only with the Office programs, you can read the following article and check if that helps:

  http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

  Method 2:

  If not, then you can uninstall all existing versions of Microsoft Visual C++ Redistributable Package and install the latest version of Microsoft Visual C++ 2010 redistributable and check if it helps.

  Step 1: To uninstall the package:

  a. open programs and features.

  b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

  c. click on uninstall at the top of the list.

  Step 2: Download and install the latest package depending on the version of Windows Vista, you use and see if it helps.

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  Hope this information is useful.

• This application could not start because the configuration - side by side - is incorrect

  After the upgrade to Windows7 x 64 professional, I am now get, "this application could not start because the configuration - side by side - is incorrect ' nero drive. I tried to reinstall the program and uninstall Microsoft Virtual C++ packages + without any result.

  Any help would be appreciated.

  Hi ChickC  

   

  Welcome to Microsoft Windows 7 answers Forum!

  a. use the System File Checker (SFC.exe) tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ·         Infoermation more on SFC scan found in this document:

  http://support.Microsoft.com/kb/929833

  b. perform a disk check:

  Use the following steps:

  1. Open computer by clicking the Start button, click computer.
  2. Click the drive you want to check, and then click Properties.
  3. Click on the Tools tab and then, under error-checking, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.

  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  1. Click Start.

  Depending on the size of your drive, it may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  The .NET framework update

  Download and install the most recent of the .NET Framework

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en

  If the error still persists please provide us with the error log:

  Type eventvwr.msc/s in the address bar.

   The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

  It will be useful.

  Thank you, and in what concerns:

  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

• the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003

  the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003. PFA

  Ranjana,

  Please, review the vminst.log file located in % TEMP and see if we could see related errors.  Otherwise follow the troubleshooting steps below;

  1. check that the guest operating system that you want to install VMware Tools is fully certified.

  2. check that the correct guest operating system is selected

  3. check that the good ISO image is loaded. For more information, see ensuring good ISO image VMware tools is loaded (1003910).

  4. check that the VMware Tools ISO image has not been damaged. For more information, see determine if your VMware Tools ISO image is damaged on a host ESX/ESXi (1004820).

  5. If you are installing a Windows operating system, make sure that you do not encounter problems with your Windows registry database. For more information about the resolution of the problems of register with VMware Tools, see Impossible to upgrade the existing VMware tools (1001354).

  6. If you install on a 64-bit Linux guest OS, make sure that there are no missing dependencies. For more information, see Tools from VMware install fails to start the daemon of guest OS on the operating systems 64-bit Linux with the glibc-common package 32-bit installed (1023185).

  If your problem persists, please refer to: KB VMware: VMware Tools installation problems that are defective in a guest operating system or contact support.

  ~ dGeorgey

• Cannot open Windows mail, WinMail.exe - Unable to locate component, could not start because SHELD32.dll was not found

  Original title: my Windows Mail program and shortened, will not open.

  My Windows Mail program and shortened, will not open.  I get a box of popup titled WinMail.exe - impossible to component locat.  Inside it is said he "could not start because SHELD32.dll was not found."  Reinstalling the application may fix this problem. "When I click OK another box opens with"MSOE.dll is not found. »

  Hello

  I moved your post to the forum Windows Vista under programs category. They are experts in the field of your request and would be in a better position to answer your concerns.

  Thank you.

• Error hpqtra.08.exe - Unable to locate component this application could not start because the WINSPOOL. DRV was not found.

  Original title: I have Security Essentials, but still had this - HELP!
  I get error hpqtra.08.exe - Uanle component not found. Then he said: this application has hurt to start because the WINSPOOL. DRV was not found. This applicvation reinstalling may solve the problem.    Any clues on what to do?

  Try to reinstall your HP Imaging software and printer drivers.

  Jim

• Window live messenger Application could not start because its side-by-side configuration is incorrect

  I have vista operating system, and every time I update my Windows Live Messenger will not fuction. Citing this fustrating to see poping up dialog box.

  c:\ProgramFile\WindowsLive\Messenger\msnmsgr.exe

  The application has failed to start because its side-by-side configuration is incorrect.

  See the log even application for more details.

  This gives all of the solutions for the non-fuction?

  I have vista operating system, and every time I update my Windows Live Messenger will not fuction. Citing this fustrating to see poping up dialog box.

  c:\ProgramFile\WindowsLive\Messenger\msnmsgr.exe

  The application has failed to start because its side-by-side configuration is incorrect.

  See the log even application for more details.

  This gives all of the solutions for the non-fuction?

  Messenger - side by side configuration error

  Start button > Search box, type regedit > press the Enter key > (uac prompt) >

  expand (click the pointer before) HKET_CURRENT_USER >
  expandSoftware >
  expandMicrosoft >
  expandMSNMessenger >
  Expand PerPassportSettings > under PerPassportSettings, find 2 folders with a series of numbers > delete the two folders including their subfolders > window regedit.
  Restart the Messenger.

  If the above does not help, please repost to...

  Section of Threads Windows Live Solution center - forum Messenger - Messenger

  http://windowslivehelp.com/forums.aspx?ProductID=2

• Windows live messenger says - the application could not start because its side by side configoration is incorrect

  Windows live messenger said---(l'application n'a pas pu démarrer car sa configeration côte à côte est incorrecte)

  Hello

  they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

  http://windowslivehelp.com/product.aspx?ProductID=2

• On startup, I get a pop up saying that program could not start the mfc90.dll missing

  How can I get rid of this error (mfc90.dll) code that opens upward at the beginning and I out X and his party? It started when I connected my phone to the computer, so I uninstalled the phone download and it still appears each time you start. Thank you MS

  Original title: MS

  Moved to Virus & Malware

  My question was not answered and I solved the problem myself Mark SchusterRx

• Error: mmc.exe - Unable to locate component. This application has failed to start because apphelp.dll was not found.

  Original title: this application has failed to start because apphelp.dll was not found.

  A window titled "mmc.exe - Unable to locate component" in the title bar, which includes the message:

  "This application has failed to start because apphelp.dll was not found.  Reinstalling the application may fix this problem. »

  that appears when you access many of the 'administration tools' in the start menu.  e.g. component, computer, event viewer Management Services, etc.

  I'm afraid I accidentally deleted apphelp.dll when cleaning on other files.  I found copies of apphelp.dll in following two tracks.

  AppHelp.dll C:\WINDOWS\$NtServicePackUninstall$ 124KO Extension Application 09/08/2004

  AppHelp.dll C:\WINDOWS\ServicePackFiles\i386 123KO Application Extension 04/13/2008

  I tried Recuva, but he could not find the file.

  How to re - install a such apphelp.dll suggested by the pop - up error message window?

  Thank you

  I thought it would be something that began with "A".

  For low overhead and free, think of Microsoft Security Essentials (MSE).

  MSE and a regularly good scan with the definitions updates using MBAM and SAS (from post above) should keep you in good shape according to your Internet habits.

• I just downloaded and installed the Lightroom update version (5.7).  When I now try to open the program I get an error message stating "the application could not start properly (0xc00007b).  It happened the last time I upgraded and I w

  I just downloaded and installed the Lightroom update version (5.7).  When I now try to open the program I get an error message stating "the application could not start properly (0xc00007b).  It happened the last time I upgraded and sent me a few files that has corrected the problem.  Can help you.  With our thanks.  John

  Try this: error "Unable to start properly - 0Xc00007b"

• Error: The application could not start properly. 0xc000007b

  I use Windows 7 x 64 and whenever I run some programs installed, such as Celestia, Google Earth, and DOSbox, I get the message "the application could not start correctly (0xc000007b). Click OK to close the application. "I think that maybe it's because my x 64 system and these programs being x 86. I have attached a log of HijackThis here and a DxDiag here.

  As mentioned in several links in a Google search, this error is probably the result of a (x 86) 32-bit tries to load a DLL 64 bit (x 64) executable.  You may need to adjust your path or copy the dll to avoid this problem.  For example, my path is configured to search for the x 64 version of d3dcompiler_46.dll (for DX11.1).  I am lucky to have x 86 applications that need the x 86 version of this compiler (in fact, I have plans with configurations for Win32 (x 86) and x 64 MSVS).  The error dialog when I start the x 86 application.  In fact, the error if I try to run Intel (vtune) amplifier on a x 86 configuration.

• Try reinstalling firefox on a windows machine 7 and I get «the application could not start correctly (0xc0000142)»

  To solve a different problem, I uninstalled Firefox. After you have solved the other issue I'm tying to re - install Firefox and get an error message that says that "the application could not start correctly (0xc0000142). Click OK to close the application. "The title bar of the window, said"setup - stub.exe - Application error. "My PC is a Dell Studio 19 all-in-one running Windows 7 Home Premium.

  I ended up solving this problem by doing a reinstall on Windows 7 site. It took a little while but fixed this and a few other issues I've had.