1041 DHCP, DHCP 10020 event completely broken on 2012 R1

Similar Questions

• My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way?

  My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way? I also do not save anything with AllAccess, icloud, or through my computer as you would with a digital camera.

  The photos are not stored on the sims, sorry.

  You can always try the Recovery Mode, little to lose at this point. If it doesn't, I suggest taking it to an Apple Store for testing.

  Recovery mode:

  Turn off your iOS device.

  Plug charge cable to the computer only (not to the device yet).

  Open iTunes on your computer.

  Hold the button to power on your device and do not let go.

  Plug the cable into the device while keeping the power button.

  Wait for the computer to detect the device and wait that he eat.

  Restore as New first, then restore sauvegardΘ if you wish.

  https://support.Apple.com/en-us/HT201263

• I dropped my phone from a height accidentally and now its completely broken and destroyed I can't access anything and all my photos are on it and the battery decreases very quickly please how to unlock my password without touching my screen its broken

  I dropped my iPhone 4S height accidentally and now its completely broken and destroyed I can't access anything and all my photos are on it and the battery decreases very quickly please how to unlock my password without touching my screen its broken and I can't touch I have all my studies on this subject two years ago and I still need the documents please someone help Please I need my pictures and documents

  Hello

  You must make an appointment at apple store in for breach of warranty replacement.

  You pay part of the cost of using iCloud upward when you configure new iphone.

  Even apple ID.

  See you soon

  Brian

• The screen on my Satellite P30 is completely broken

  I have the laptop above and a week ago the laptop fell, my partner was out with the machine in time and I don't know it fell on concreate must have rolled. Now, the screen is completely broken. What I see is a white blob, it publishes, but then I get a "disc error".

  The HARD drive does not sound good. His will required: a new full enclosure, HARD drive and screen, there are also a few other internal parts rattling as a toy for children. Could someone give me a figure of ball game?

  Thank you

  Hello

  The new parts would cost a fortune! The display is one of the expansive laptop parts.
  I think you should try to get a laptop second hand or parts.
  Perhaps you could find something on the sales platform very famous internet auction. Take a look here

• BlackBerry smartphones, I can't clear the log of events completely! Bold 9900

  I don't know why, but I just can't clear the log of events completely. I always stayed with two newspapers which cannot be erased. The two newspapers said: error and mistake. It's only affect the phone, but it's pretty disturbing with two newspapers cannot clear. I had tried to pull battery, resets and it can always be removed. Help, please.! My phone is the Bold 9900. Carrier is Singtel. Operating system to 7.1.0. HELP PLEASE! Thank you!

  Nope.

• Creating completely broken cloud

  Sick of the usual garbage with creative cloud requires me to connect several times, I decided to do something. Oops. Now, creative cloud is completely broken. I deleted everything and now I can not install anything...

  I have a retina MacBook Pro 15 "El Capitan running end of 2013.

  Then I followed the guide to creative cloud sign me or asking to connect you several times. Step 3 suggests removing the creative Cloud Desktop application. Good idea. Follow the guide for this. Then I downloaded the installer of creative cloud. Tried to run. Nothing.

  Righto, try solutions more creative Cloud installer does not open. A ran the vacuum cleaner on creative cloud. Still nothing.

  Start to get desperate. Start to remove the CC apps (Lightroom, Photoshop, Bridge, InDesign). No, nothing.

  It's bad. Now get rid of everything in / library and ~/Library which looks like it has something to do with Adobe.

  Nothing. Absolutely of zippo. Never mind is not able to sign in CC. Now, I have no Adobe application on my system and no way to get them.

  I got it with the disgustingly bad software quality that I got used to with Adobe products in recent years. Such things used to be so good. Now it's garbage.

  Any suggestions?

  OK - this time it wasn't Adobe. A patient rather Adobe tech remotely connected on my machine and I tried all kinds of stuff for about two hours. Nothing has worked. But in the end, he suggested that I try a different network. I was on my normal ISP ADSL (which must remain anonymous). So I changed to a 4G network via iPhone tethering and Jenifer. All of this worked instantly. My ISP must be something weird.

  Now I have to clean up the mess. Nuts.

• Video stop event COMPLETE and action

  Hello, I am a demand for an exhibition and is necessary to restart to start itself if it is innactiv, for other visitors.

  I use

  addEventListener (Event.ENTER_FRAME, fl_EnterFrameHandler);

  function fl_EnterFrameHandler(event:Event):void

  {

  MovieClip (this.root) .gotoAndPlay (1, "Scene 1");

  }

  For most of my sequences, but when it's for the pages of the video, I have a question:

  I have a PlaybackFLV video on my 'sequence 4' and I want to return to the Sequence 1 when this video is over

  I tried whith, copy the following code:

  @

  Import fl.video.FLVPlayback;

  Import fl.video.VideoEvent;

  comp.addEventListener (Event.COMPLETE, videoComplete);

  function videoComplete(Event:Event):void {}

  MovieClip (this.root) .gotoAndStop (1, "Scene 1");

  }

  
  

  and

  
  

  Import fl.video.VideoEvent;

  video_secret_fab_EN.addEventListener (VideoEvent.COMPLETE, videoComplete);

  function videoComplete(Event:VideoEvent):void {}

  MovieClip (this.root) .gotoAndStop (1, "Scene 1");

  }

  But I always get this message:

  004, layer 'Actions', Image 28056 sequence, line 55, column 61

  1119: Access the FULL maybe property not set through the static class type reference.

  Sequence 004, layer 'Actions', Image 28056, line 55, column 61 1119: access to the COMPLETE poperty can be undefined, via the type of reference a static class. (Sorry I'm french and not bilingual...)

  I am new to AS3 and I don't know what the problem is.

  I don't want to use a timer, because I have to integrate the same code for multiple video pages in my project.

  Thank you for your attention and hope you can help me.

  I think that the event Complete for FLVPlayback uses only the standard event class:

  import flash.events. *;

  comp.addEventListener (Event.COMPLETE, videoComplete);

  function videoComplete(e:Event):void

  {

  MovieClip (this.root) .gotoAndStop (1, "scene 1");

  }

• Need help with the earpiece of video events complete and twinkle in Web site button

  Hello.

  I'm building my first site flash on AS3 and I'm having some problems that I can't solve.

  Question No. 1:

  I have a video that plays on a page (frame) and want to go to the next page after the video is finished. It's pretty easy... I did a search for information and came to the top with something in the sense of (written in memory):

  instance.addEventListener (Event.COMPLETE, instancecomplete);

  
  function instancecomplete(event:Event):void {}

  gotoAndStop (3)
  }

  And it worked fine when the page loaded initially (it was the homepage), but after he moved to the next page, I clicked the button which takes back me to the homepage and what might happen is that the video would play for about 1 second and send me back to the next page. My assumption is that what is happening is in loading, the event listener is to see that the video does not play, assuming that it is finished, and it takes me to the next page. If this is true, is there a way to delay the eventlistener?

  Question 2:

  The buttons on my page of sparkle. I read on this topic, and I apparently it's because I'm on a mac. I checked on a PC and the flicker isn't here so it must be because im on a mac. On a forum I found the following line to fix it:

  btnHome_mc.buttonMode = true;

  The problem is... I never wrote this line, and if it is a code generated automatically, I can't find it in the scripts of action... so I'm stumped. Any help?

  I don't know what to say without seeing the code.

  Try to remove the listener:

  function onComplete(e:VideoEvent):void {}

  instance.removeEventListener (VideoEvent.COMPLETE, onComplete);

  }

• From the start I get network error message: DHCP error event ID 1003 began ID1002.

  I have Compaq Presario SR1220NX, Windows XP, SP3. With the help of Verizon FIOS Wiresless and AOL Broadband Internet service provider.  When starting up I get the message of network event ID 1003 errors and 2 times I got ID 1002.  I was on the phone with Verizon, restarted Wiresless router and they did some other configurations.  Looks after the router restarts and stuff and revive his party.  But after a while he comes back again after cold reboot. Services DHCP is set to automatic.  I don't know that he always comes to the top.  Any help would be appreciated.

  Hello
  You can check these links:
  http://www.Microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+operating+system&ProdVer=5.2&EvtID=1003&EvtSrc=DHCP&lcid=1033

  http://www.Microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+operating+system&ProdVer=5.2&EvtID=1002&EvtSrc=DHCP&lcid=1033

  I suggest you to contact your Internet service provider to verify the DHCP in your router settings.

• WMCE54AG "has not rec'd a DHCP response" cannot complete the installation.

  My neighbor recently moved to Germany and gave me his Dual-Band WirelessA/G Media Center Extender (model #wmce54ag) that he used with Windows Media Center Edition 2002 (gave me). It worked fine for him. I'm passed through all the steps and things worked well until he tried to end the connection. As he tried to connect I received the following message on my TV screen: ' Media Center Extender Connedted wireless network "My Name", but did not receive a DHCP response. " To check your WEP key or password WPA select BACK or next to the attempt to connect to the media center pc.

  I tried this several times and the intensity of the signal is like a bar less than perfect so it looks llike it gets the signal. What is the reaction of DHCP and how can I solve this problem?

  I use a Linksys Wireless - N Broadband Rounter (model # WRT160N) that I installed a few months ago and it works great. Is it possible that it's too 'new' for the Media Center

  Extender? Thank you! Rich

  You must configure your Media Extender to connect to your wireless network... Follow this link

  Make sure that the settings of your wireless router and the Media Center Extender are identical...

• Windows Media Center almost completely broken and ehRec.exe take 50% CPU

  My windows media center is broken. Part, but probably not all, the problem is ehRec.exe uses up to 50% of the CPU, which means that it is completely connected because I have a computer with dual-core CPU.

  Do not record scheduled recordings. Sometimes, I can't even in media center. It becomes inadmissible. Usually just after a reboot, I can enter (which starts the record if we were waiting) but not if I first have to do other things. It seems that my media center just kaput.

  I got this incomprehensible message in the case where the application log

  The description for the event (0) in Source (Media Center Scheduler) ID is not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: unable to write the backup file...

  There is not any other journal entries of interest, with the exception of those who say that I started a record while the show was in progress. I get those now, when I start media center just after the restart, because he wasn't already record where it should be.

  EhRec.exe sometimes stop looping. Not this time. It was looping when I started to write this and it's always a loop.

  Is it possible to reinstall completely media library? I tried to run Setup, but it blocks half the time with ehRec.exe pounding to the CPU. I see that other people have the problem of ehRec.exe (beginning around mid-August), but it doesn't seem to be a real solution to this problem.

  Remove any recent update of microsoft .net framework. I had this problem several times. The first time, he ended up reinstalling the entire system. Although I suspect that the recent update of the .net framework is the culprit, I was not skilled enough to remove it first.  This time I look for answers elsewhere and no one really had a clue. Then I removed the .net framework 4 client update and voila, problem solved. I hope it will work for you, if you don't have not messed around first with other parts of the system too. I tried scannow /sfc solution, but really... This only works if you have the most recent operating system on the disk. Many have download updates, service pack, Microsoft and therefore, cannot provide a disk with the appropriate files. Anyway, it is not the solution. Apparently, the way of downloading these updates of .net framework is important. I don't know the solution for a correct installation of updates, but do not know that the 50% CPU problem is solved EVERY time, repealing the last update. Hope this helps someone. I have certainly spent enough time and lost enough when microsoft updates, disable the operation of my computer. Unfortunately, it's the solutions we try that sealed the fate of our readers. I lost 15mos of professional documents in my records of e-mail in September of my attempts stupid to solve this problem, after that a previous update of .net framework caused my duty reinsall windows.

• Java, completely broken on 41.0b1 x 64 (Win 7 Ultimate x 64)

  After the last update of this beta java version failed completely. I noticed when I tried to access a secure site which uses a Java plugin to start a remote desktop. At the start, he should ask if I want to run the Juniper configuration Applet, which is a Java applet. I do not get this over on 41.0b1.

  I have a machine running 40.0 and backup comparing production and the backup machine that I note that the 41 update has removed several addons including the Java Platform SE 8 U51. On the backup computer running 40.0 site working properly and the following java work properly test sites.

  Resettlement of Java did not set it and starting Firefox mode safe does not set it. The site was already quoted in the modules and popup exceptions.

  Trying to check Java https://www.java.com and www.test-java.com that shows that Java is not installed or activated when, in fact, it is - it is now completely blocked in Firefox.

  I cannot stop the automatic update to 41.0b1 on my backup machine, and once that had passed that Java was too broken on this machine.

  Some security is good, but at this rate I might as well turn off the PC for total security!

  Any ideas?

  1. the update seems

  It's a matter of 64-bit, because mozilla has decided to only support flash in these versions...
  https://wiki.Mozilla.org/Firefox/Win64/meetingarchive#Clean_Slate_Approach

• Someone at - he used CameraRoll yet? Seems completely broken.

  I am currently implementing navigation for a file using the CameraRoll since File.Browse () methods are still badly broken. I have implemented a method of load using the example of the documentation. Unfortunately, it seems simply crash the application. Here's the code to date.

  private function load(e:MouseEvent):void
  {
      trace("loading");
      menu.close();
      if( CameraRoll.supportsBrowseForImage )
      {
          var mediaSource:CameraRoll = new CameraRoll();
  
          mediaSource.addEventListener( MediaEvent.SELECT, imageSelected );
  
          mediaSource.browseForImage();
      }
      else
      {
          var myFile:File = File.documentsDirectory;
          var filter:FileFilter = new FileFilter("Images", "*.png;*.jpg")
          myFile.browse( [filter]);
          myFile.addEventListener(Event.SELECT,chooseFile);
      }
  }
  
  private function imageSelected( e:MediaEvent ):void
  {
      trace(e.target.nativePath);
      img.setImage(e.target.url);
  }
  
  private function chooseFile(e:Event):void
  {
      trace(e.target.nativePath);
      trace(e.target.name);
      var name2:File = File.desktopDirectory.resolvePath(e.target.name);
      trace(name2.nativePath);
  
      img.setImage(name2.url);
  }
  

  I'm detection to see if the film is supported and then using one of the two callback methods to load the file.  It could be done with the method of a reminder if we could rely on the event. Target property from the File.Browse method, but we cannot and this is another problem.

  In any case, it seems very simple. When he runs in the sim card, the supportsBrowseForImage property is true indicating it is supported, but on the browseForImage() call, the application disappears. The callback is never called. I think I can see a gray bottom bar as if the app were reduced to a minimum, but I can't bring it back. Heck, I can't yet bring up the system menu. If I redeploy the application (which causes the previous uninstall) it seems to recover.

  I use FB Burrito and am, I changed the project settings to use the SDK.94. I use the simulateur.94.

  I installed TourDeMobileFlex found here: http://flex.org/TourDeMobileFlex.fxp

  The TourDeMobileFlex camera seems to work fine in the 0.9.4 Simulator. He opens the roll and you can choose your image saved previously.

  The CameraRoll of the TourDeMobileFlex code:

  
  http://ns.Adobe.com/MXML/2009.
  xmlns:s = "library://ns.adobe.com/flex/spark".
  paddingTop = "10" >

  
          
  If (CameraRoll.supportsBrowseForImage)
  {
  var cameraRoll:CameraRoll = new CameraRoll();
  cameraRoll.addEventListener (MediaEvent.SELECT, {function(event:MediaEvent):void}
  i.source = event.data.file.url;
  });
  cameraRoll.browseForImage ();
  }
  on the other
  {
  l.Text = "CameraRoll; not supported
  }
          
      
      
      
          
  If (CameraRoll.supportsAddBitmapData)
  {
  var cameraRoll:CameraRoll = new CameraRoll();
  var bd:BitmapData = new BitmapData (640, 480);
  bd.perlinNoise (640, 480, 1, Math.floor (Math.random () * 10), false, true);
  i.source = bd;
  cameraRoll.addBitmapData (comics);
  }
  on the other
  {
  l.Text = "CameraRoll; not supported
  }
          
      
      
      
      
      
      
  

• Windows Update, firewall, Defender, Security Essentials completely broken

  Hey guys. Been having a lot of problems with Windows 7 64-bit today. At first, I thought it was average PC problems, but it turns out (according to malwarebytes and security essentials) that I picked up some nasty viruses. Windows Update, windows firewall, security essentials real-time protection and a few other things all seem to be broken and does not boot. I tried everything under the Sun, it seems. Just recently, I scanned completely and removed the virus. Any help would be appreciated.  My virus:

  Results of MalwareBytes and Security Essentials

  My PC seems to be in a very fragile state right now. I have NO system (still friggin happens to me) points of restoration and one step before the removal of virus he told me my copy of windows was not authentic. This seems to have severily damaged my PC. Is there something I can do?

  I think it started about two days ago, I had to install a driver stupid on my PC to my PSP. It was disabling driver signing verification. Last time I do this.

  Create a Ubuntu Live CD, boot with it and plug in a USB key and copy what you need off.

  Please, use this as a learning experience... Always save.

• Problem of event complete SWFLoader/Image (bug?)

  I have a SWFLoader in my application whose content is dynamically linked to a data grid for loading different images. Depending on the size of the new image I want to make some adjustments, etc. to the SWFLoader itself... is not important for now.
  
  The problem is that if I take the width of the SWFLoader instance on the 'complete' event, it gives the value for the PREVIOUS imaging so my math function is useless.
  
  Try this to see what I mean:
  [Bindable]
  public var imageSource:String;
  
  private void temp (): void {}
  mx.controls.Alert.show ("imgLoader.width:" + imgLoader.width);
  }
  ..
  < mx:Button click = "imageSource ="someImageURL"" / > "
  < mx:SWFLoader id = "imgLoader" autoLoad = "true" source = "{imageSource}" complete = "temp ()" / > "
  
  
  If you implement the code above, and assuming that imageSource is a string zero during initialization, you will get a value of '0' for the width of the imgLoader of the instance when you load a new image.
  
  To work around this problem in Flex 1.5, I could use doLater (Thi, "temp"), but doLater seems to have been deleted in Flex 2.0.
  
  My current work around is to change the above code as follows:
  
  private void temp (): void {}
  this.addEventListener ("enterFrame", blorch);
  }
  private void blorch(b:Event):void {}
  mx.controls.Alert.show ("imgLoader.width:" + imgLoader.width);
  this.removeEventListener ("enterFrame", blorch);
  }
  
  feels like a hack to me... is there any way to get this working without using the above functions? Kind of seems pointless to dismiss 'doLater' just to make me write a function that does essentially the same thing in Flex 2.0. I tried to use the 'resize' instead of 'complete' event and it works... If the loaded image is a different size than the previous. If the image is the same size (as is often the case in my application) then it does not work.
  
  All of the Adobe/Macromedia, fellow developers suggestions?

  Never thought to use "init", not sure it will work for images. The recommended solution is to subclass SWFLoader and override updateDisplayList