Touchpad gestures works do not correctly on Z510 with W8.1

Similar Questions

• 11 flow: Flow 11 touchpad gestures works is not in Windows 10.

  I upgraded my Stream 11-10 Windows and now the gestures on the touchpad do not work. I can click on something and that works but the scroll and hitting swiping does not work.

  I've updated the drivers.

  Do the drivers simply not support this, or is there something I can do to get things to work.

  did you try going to the control panel - mouse and touchpad and change settings, (I assume you did)

  I had a problem with the touchpad gestures too. The synaptics driver delivered with windows on my hp Pavilion 10 would not save the settings I wanted. In my case, I wanted to get rid of the gestures.  But it would not keep my favorite settings after a reboot. I got the old hp support synaptics driver and it works better for me. The only problem is that windows maintains the new driver. To resolve this problem, you must change the device settings to not automatically download the drivers.

  Here's what worked for me to stop the new driver of constantly updating:

  https://answers.Microsoft.com/en-us/Insider/Forum/insider_wintp-insider_update/how-to-block-automatic-reinstall-of-a-driver-or/bff07224-4ce2-4B42-AB29-68c3a305d730?auth=1

• TouchPad gestures works do not [Aspire V5]

  So I hope someone who works at Acer reads this. Or someone who is technically advanced.

  So, I first noticed the issue with sensitivity. The mouse is very sensitive. Then I noticed that the gestures do not work either. I can't scroll with the mouse. I went in deep and tried to understand the problem (but no solution).

  So I performed these steps:

  1. Changed the speed of the pointer for the fastest (I didn't like the speed of the slow pointer). The pointer was still quite slow.
  2. Has decided to modify the specific drivers for TouchPad. I go to the tab MOMENTUM under the mouse settings. I look and see that the 'Options' button is greyed out. I also noticed it says "Standard PS/2 Mouse.
  3. I decide to find the software to change the settings and it located in C:\Program Files\Elantech. I open ETDAniConf.exe and decide to do a test. I uncheck the click right left click and some other parameters of scroll. Nothing helps.
  4. Then I decided to uninstall it and install the drivers. Did. Nothing has changed. Modification of the wiretap, the scrolling options button does nothing. The mouse settings still shows as 'Standard PS/2 Mouse' even if the tab says MOMENTUM.
  5. I decided to make a big step and just reinstall Windows 8 altogether using Recovery of Acer. Reinstalled, still faced with the same problem. Always known as "Standard PS/2" mouse
  6. I try another way to try to solve the problem. I'm trying to find the similar driver more up-to-date. I find on that was much more recent (version 2013 rather than 08.2012). To install it, restart computer. Always without success. Always known as "Standard PS/2 Mouse.
  7. I decided to go the final round before asking the question here. I downloaded a copy of Windows 8 Pro from the Microsoft Web site and transferred the ISO in the bootable flash drive. I split the hard drive in a clean score (60 GB) and installed fresh Windows 8 Pro on it, without all the Acer drivers. Of couse I was missing the network drivers, so I had to go to my desktop to download the drivers online. I decided to first download the TouchPad drivers. Downloaded, copied to a Flash drive down them on the Acer laptop. Restarted the computer. Always face the question.

  So here I am at the moment. I had the laptop for a good discount of my work (as a bonus working there). It's a time discount. As you have noticed, I mentioned he was grateful as "Standard PS/2 Mouse. It's huge index that tells me that the drivers are really bugs. The problem here is that the TouchPad drivers are not recognized as if it were a touch pad, but as a mouse. A mouse that can just right click, left click.

  If someone is facing this problem or knows how to fix it, please help me.

  So I worked with a Microsoft Technical Support, and apparently the problem is on the side of the Acer. The automatically installed recovery partition the Elantech Drivers for the TouchPad and downloads Web site showed that the pilots Elantech. After some research, we found the Synaptics drivers on their official website and everything started working normally. Please, please, please, please fix this issue. I am frightened by the number of customers who will have to deal with this issue.

• Touchpad gestures works do not on Samsung series 5 Ultra

  A few months, I bought my laptop and gestures multitouch touchpad worked just fine (scroll, zoom, etc.), but after one of the windows updates, they no longer work. Someone knows why?

  PS. I am running Windows 7

  Hi Zheel,

  First of all that I would say to go to Windows update history and check the obtained updates recently installed. Read the following article to know how to check it and let us know the number of KB updates.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  I suggest you to update the touchpad drivers and check. Check out the following link to update the drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  I suggest you to download and install the software updates available for the computer. It will install all the drivers updated on the computer. Here is the link for your reference. You'll find it under more downloads in the following link.

  http://www.Samsung.com/UK/support/model/NP540U3C-A01UK-downloads

  You can refer to the section [448891] Smart PC: my touch screen is abnormal behaviour and locks up for a few seconds, what can I do? of the following article for more information on the update of the driver.

  http://www.Samsung.com/UK/support/model/NP540U3C-A02UK-troubleshooting

  Reference:

  The problems with the removal of updates

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-removing-updates

  Let us know the State of the question, so that we can help you.

• Touchpad gestures works do not on laptop series 5

  I have a Samsung series 5 NP530U3C-A04AU, recently upgraded to windows 8 with drivers up to date yet my touch gestures (scroll, zoom, charms etc.) do not work. I tried refreshing and resetting windows 8, but the problem persists. Help, please

  I've updated my software of Samsung and drivers using the SW update and have now a touchpad works fully. It's great!

  I'm on the chat live on the site of Samsung and me the link to download from here the support person.  (Can't seem to find it through their site).
  Good luck!

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

  Original title: System reports the NIC does not properly

  Using Vista Home premium on HP pavillion m8075a model RZ555AA-ABG. Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

  As none of the problems are met with connection network, do I ignore this warning or try to update the driver?

  Hi eucalyptussurfer,

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  Please see the following article:

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  http://support.Microsoft.com/kb/932520

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

  My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

  Tuesday, July 17, 2012, 10:53:01 + 0000, JonathenHarmon wrote:

  My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

  Of course, it sounds like a hardware problem, not a a Windows.
  Contact Acer for repair.

  Ken Blake, Microsoft MVP

• Jumping cursor, sporadic and touchpad doesn't work does not correctly for HP envy 15

  Hello

  I had my HP ENVY 15 t-q100 CTO Notebook PC in September 2014. It has 8.1, 64-bit Windows. For the first few weeks of use, I don't have any problems. Then, I started having occurrences more problems of cursor/touchpad to the point where it happens all the hours of use (not a problem of external mouse):

  Jump around on the screen (a few millimeters in inches).

  Move per increment on its own without me anywhere near the laptop (usually spazzes left).

  Does not allow scrolling functions / normal touchpad when problems are happening.

  Works as if I am holding down the click button while I try to move it - mostly frustrating when I make the important work.

  At random click things that I try to move it.

  Here's what I tried to do to fix this and did not work:

  Roll back the driver (did not work).

  Update driver (no update available).

  Reset the device (works for a minute or two).

  Reboot (I do it everyday anyway).

  Reduce the speed of the cursor and other mouse options offered online.

  I've seen similar problems for the HP Envy 17 and other laptops, but no real solutions have been proposed. Please help me with this problem.

  In January 2015, I received by mail, a brand new Envy 15 t-q100 purchased HP's official website. Packaging and the laptop is here Mint (aesthetically speaking). That being said, I had the exact symptoms described in this thread since the first day. With a replacing synaptics driver, I was able to stabilize the mouse enough to effectively use the tool 'curve of pressure. " Then, I determined that it was in fact a hardware problem. I noticed that from time to time, the "animation" icon would indicate that pressure is applied even if I wasn't touching the laptop. If I applied pressure by pressing or stirring on the basis of the Palm, would stop the pressure indication and use mouse returns to normal. However, this problem gradually went from bad to worse, and finally the touchpad does not have all together. Firmware and BIOS flashing helped before, but has been either nothing change.  I debated on referring to HP for repairs under warranty, but after having to wait a month to get this unit in the first place, in addition to reading all these horror stories of people coming back a semi destroyed unity and always faced with the same symptoms, I was ready to fight against myself. so, I found a source replacement nine track want pads 'zone of control '. Ninety-nine percent sure that I had a defective keypad, I bought P/N "761210-001" to "parts_direct101" for $59.95 ebay seller. Disassembly, I discovered that one of the screw mount for the pad was loose (this may have contributed to the problem). I decided to replace the pad in any case. Finally. No more glitches. After months of experimentation and reading these forums, I have now a mouse working 100%! It's been more than 2 weeks now, since I replaced the touch pad and still no problems! I use my laptop 3-4 hours per day. I always use the synaptics driver installed replacement from "dpinst.exe" found in the x 64 folder downloaded directly on the website of synaptics 'uncompressed'. I have not tried to update with windows update again. Just happy to finally have a mouse to work on this beast of a machine. I'll keep you all posted if this problem will never return. With regard to the absence being automated support generic responses to "Customer Service" aka HP, I guess HP has accidentally put on a bad batch of caterpillars and they simply cannot 'afford' parts, labour and logistics to issue a notice of recall of this magnitude! Unfortunately, this laptop must be completely disassembled to replace the touchpad. I would NOT recommend this fix if you feel that it is beyond your skill level. Instead, call the HP technical support and insist that you have received a unit with a defective keypad. I hope this helps!

• Why is one of my 4 5893 Modules doesn't work does not correctly?

  Hello

  This is the configuration of my HW and SW:

  LabView 2013 SP1

  1 x cRIO 9076

  4 x NI 9853 CAN Modules

  CAN0 - 1000 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  CAN1 - 500 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  I worked on a program for a test system, where each Module 9853 control two devices (CAN0 and CAN1), the same type of systems is controlled by other 9853 3 Modules in parallel.

  So basically, I use exactly the same functions for each module. So far, everything has worked correctly on module 1, but now that I started to test all other modules I have the problem that Module 3/CAN0 does not correctly read the information.

  While watching the FPGA façade, I see that each 10000ms one value is read, but only on that ONE module (frames are sent every 1ms from my unit)

  I tested the HW itself using the included examples and it works correctly, the only difference is that the example used only 2 Modules, one to send data and the other to receive it.

  I included my FPGA program as an image, I really don't think there is a problem with my RT SW, because all the other modules are working properly. Basically, my SW FPGA bed CAN Modules and puts the information in a FIFO, if there is an error (no information), it will make a loop once more and check again.

  Thanks for your help

  I solved the problem, it was an error of configuration on my side.

  The entry for Module3 CAN1 time-out was set up NOT as 0ms and 10000ms as I thought! , so that was my reading for DUT3 loop run only every 10000ms.

• Update KB976902 now the mouse doesn't work does not correctly

  I had the KB976902 recently updated on 2 of the 3 computers and 2 who got now have a mouse that does not correctly.  The computer number 3 does not have the update and still works fine.  All three are almost identical hardware and software and have legitimate versions of windows 7.

  The problem of the mouse made play almost almost impossible. Left click crashes, lag mouse click one or two times when I I try to do a restore from the left eventually drag a shortcut of the thing, I clicked on and don't know how or why.

  I did a restore on a single computer, but it did not help.

  Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves. Since you are not sure, I'll have to have executed two removal on all of the computers in question tools.

  NB: If a step said to reboot, reboot!

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  5. open Internet Explorer 32-bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Keyboard not working does not correctly earns 10

  Hello

  I have an Aspier 5332 OS 10 pro windows, the keyboard does not work properly. Working scroll not working, mouse pad moves the cursor, but listen to select something opens the context menu . It just doesn't feel good. Selection of stuff, feels that it is necessary to click the button twice.

  Before OS update the mouse used alps touchpad. Device Manager says its now mouse compatible ps/2

  The device manager says that it has installed the most recent drivers.

  Very annoying. After searching on the web, this seems to be a big problem. All the solutions to this?

  Thank you

  Found a driver Alps is compatible thank you. http://www.iteegra.com/Acer-Aspire-5332-touchpad-not-working-Windows-10/

• application checker work does not correctly

  I get a message "verification of the application does not work correctly" for awhile.

  For this reason, it seems my itunes and other programs will not work either.
  This only happens on my user account that I am the administrator, I think. can't find a solution. can anyone help? is this a microsoft problem? someone phoned me and said they call for help on a reported error, I didn't trust it.
  I brought it to my local computer shop and they couldn't find or fix. It's a little weird and I need a solution please

  Hi RitaMoore,

  ·         When exactly do you get this error message?

  ·         You get this error during a launch of the application?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.

  Method 2: Create a new user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Microsoft mobile mouse 3000 works do not correctly under Vista

  I have a mouse Microsoft 3000, which is less than 3 months old. I replaced the battery. I used the reset button. However, the mouse will not turn on gree. indicating that the mouse works. I saw this question already on the Microsoft answers site. ILO is unable to find the solution. Can you help me?

  Hi Instructor4216,

  I recommend you to try the steps in the articles below. You can exclude what you have already tried.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122

  If the problem persists, you get your mouse replaced.

  http://support.Microsoft.com/kb/326246/

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PrintScreen of Windows 7 doesn't work does not correctly

  Not sure if it is in the correct category but... I downloaded Windows 7 Pro 64 - bit from my school DreamSpark account and installed on my computer, which is pretty old about 5-6 years.  There should not be anything wrong with the copy of Windows, it is not a debug or whatever it is, it's just the regular retail copy.  Almost everything works fine except for a few small quirks/bugs.  First of all, I can't preview images using the Windows Viewer, it displays simply all the rectangles fully black images.  However, if I open an image to preview in Image Viewer, and then click full screen/slide show then it displays the images as should be in full screen.  And then exit fullscreen Gimme the picture in black and white.  Not a particularly serious issue just annoying really.  In addition, perhaps in relationship I guess, I recently discovered that my Windows PrintScreen does not work.  When I hit PrintScreen, or any variation of the PrintScreen key combination, it captures just a large black rectangle, as if my entire screen showed only in black.  I tried to paste my Clipboard into Paint and Photoshop and both give me a black monitor rectangle size, it's really weird.  I even tried a third-party screen capture software and it's the same thing and I can't find anything even close to relevant on the internet.  Anyone have any ideas, anything is appreciated.

  Another separate problem: when I turn on my computer, it will sometimes, not often but enough times to be meaningful, decide to not turn it on and recognize my keyboard and I have to restart and I hope that he do it again.

  Last thing, I swear (I should probably do different missions).  My computer, as in my windows, does not sleep properly.  Sometimes, he won't in the mode 'sleep' and every time I try and wake him up it gives me a white, white I think, screen instead of the login screen.  If I press space to unlock my computer, because there is no password, it will take me on my desk but he will not recognize my internet connection ethernet or my desktop speakers and I have to restart my computer to get these features.  Once again a lot of what I think are really weird problems.  Any ideas on any of my problems is greatly appreciated.

  HI -.

  Run the Windows 7 Upgrade Advisor to see if any conflicts are listed:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check the support site of your system manufacturer for a BIOS update and other updates to the device driver for Windows 7.

  Kind regards...

  jcgriff2