12 '' macbook SPACEBAR to stop working

Similar Questions

• 2007 Macbook Pro Wifi stopped working

  Out of the blue, the Wifi on my 2007 MacBook Pro has stopped working.  He said "turn wireless on" and the button lights for click, but when I click, nothing happens. Went to the Network Diagnostics and did the same thing - same result.  Guess the airport card is shot.  Nothing else to try?

  Thank you, Mary

  Try a reset of the SCM.

• Keyboard on a 2013 MacBook Pro has stopped working

  Hello world! So, a couple of months ago I accidentally spilled some coffee on a corner of my MacBook (and it was really just a little) and the same day, the keyboard no longer responds. I didn't really know what to do so I checked what people on the Internet said, I tried to reset it in safe mode and was a success, but it does nothing. Then, after a week or two, a few buttons (only 2 or 3) has started working again, others were still unresponsive. So I decided to give finally the laptop for service guys, and now they are asking a huge amount of money, because there are critical failures in the hard drive (it's what they say at least). The thing is, before I gave them the * thing I fixed and there is no fault whatsoever, this is why I would like to know, if they tell the truth and that I should have the hard drive has changed, or are they just trying to get as much money as possible.

  Thanks in advance!

  If you can, connect a USB keyboard to your Mac, and then follow the instructions to reset it How do I reset the NVRAM on your Mac - Apple Support

• The CTRL key on my macbook pro has suddenly stopped working, but only for

  Hello

  I have a Macbook Pro with Yosemite, and suddenly today the ctrl key stopped working but only when it comes to special characters, not to do a right click. I have accidentally set something off the coast, or what happened? I write a lot in Swedish on this computer (that I bought in the USA where I live too), I need these special characters, so is there an easy way to solve this problem?

  See you soon,.

  Leo

  Special characters would be the key to the default

• Sharing printers has stopped working for me. MacBook Air "think" printer is not connected.

  Sharing printers has stopped working for me. I have an Epson Stylus Photo R340 connected by USB to my Mac Mini end of 2012, and until recently, my MacBook Air has been able to print to it. Now, he 'thinks' the printer is not connected. Computers are on WiFi. Both computers have an OS X 10.11.5 now and the latest driver of Epson printer. Printer sharing is enabled in preferences, sharing, and "Share this printer on the network" is checked in the preferences, printers and Scanners. I went through the hoops to remove the printer and add it again on the Mini and the MacBook Air.

  Of course, the Mini prints very well via USB. Someone has an idea (that I have not already tried) how to get the sharing of printers to work again?

  Other sharing services work, such as the file and screen sharing?

• Audio has recently stopped working on macbook pro 2014, Win7 x 64

  Material: Retina Macbook Pro mid 2014-15 "2.8 GHz 16 GB of RAM

  Software: Mac OS + installed bootcamp Windows 7 business N SP1 64-bit with latest updates attached to the field

  Audio worked absolutely the facility for a year or two. Just recently the speakers and headphone stopped working and SPDIF red light of the headset jack is now constantly lit (did not use to be informed in all). Maybe happened as a side effect of windows update, update of apple or software update or demand of the NVIDIA driver installation.

  What audio drivers should I have installed Bootcamp software support for MBP mid 2014? Real audio hardware is present on this MBP - Apple card is vague on this point?

  When scanning for hardware changes in Device Manager the same driver is always automatically reinstalled. There is no option to delete this. The driver update has no effect. The device is shown as working properly. There is no errors and there are devices of reading for the speakers, headphones and SPDIF, but no audio exited actually.

  • High definition audio
  • Manufacturer Microsoft
  • Location 0 (internal high definition Audio Bus)
  • version 6.1.7601.17514
  • day 11-19-2010

  There was also a Microsoft device system speaker (don't download reinstalled during the analysis of new equipment) and nvidia audio drivers (for audio output HDMI).

  An additional symptom - connect headset does not show the helmet as playback device as a playback device connected as I expect.

  Is it possible the Bootcamp software support has failed to reinstall the audio drivers correctly? Can I get a feedback or a software Bootcamp Support log to see what's happening?

  A Windows somehow got locked in a SPDIF output? This cannot be a purely material error as MacOS still work very well?

  Other measures to diagnose this problem?

  A few steps I've tried without success:

  • Check all volume and mix parameters
  • Roll back these recent software installations
  • Watching installed the drivers in Device Manager - all audio devices are shown as working properly analyze, because material changes do not find any additional sound hardware to configure. Update driver drivers online research is not to find an updated driver.
  • Using an another USB audio device - this device works great
  • Reboot under Macos - built in speakers very well work
  • Restart in SafeMode the Windows - audio device does not appear to be installed (maybe the driver no is not supported in safe mode).
  • Reset the NVRAM (restart with option commmand PR)
  • Reset the controller of the SCM
  • Run the restore of the system - restore points fail to restore with the exception of a few of the latter that does not solve the problem
  • Uninstalling all audio drivers and re-run bootcamp support software setup.exe (the older version of download 5.1.5640 which seems to be the only one who supports my hardware/windows 7 x 64 combo)
  • Back the NVIDIA driver to the version provided with the support of bootcamp software
  • Intel chipset installers running provided with the support of bootcamp software
  • Assistant Configuration boot camp running on Mac OS to get the latest drivers - fails because does not support my combination of material and win7 x 64 as documented on Apple support pages
  • Not running Apple Software update - no update is available for all drivers.
  • Don't run Windows update - no update is available for all drivers

  If the red light goes out in OS x but not in Windows, it seems to be the State of the combined analogue/digital port stored in the Windows registry. On W7 on a 2013 rMBP (he has the card nVidia 750 m), this is what you should see your Audio devices.

  

• MacBook pro stolen the question, 'Find my mac' still works to erase personal information if I put it before changing the icloud/itunes account password?  or is my phone app stop working when I change the password?

  MacBook pro stolen the question, 'Find my mac' app still works to erase personal information if I put it before changing the icloud/itunes account password?  or is my mac app stop working when I change the password?

  Unless you fully active 'find my Mac' BEFORE that your mac has been stolen, it can't do anything for you now. It is not active, and there is no way to make it active after the fact.

• HP Photosmart Plus B209a-m stopped working with a Macbook, still works with others

  We had this printer wireless printing of 2 Macbooks a running OS X 10.8.2 and another OS x 10.6.8 without any problem for some time when it suddenly stopped working with the old Macbook running 10.6.8.

  When we tried to print anything in that nothing happened, when we open the print queue, there's an exclamation point to the left of the print job and to say an error message something about the levels ink (ink levels were very well as it print to the other Macbook without problem).  We tried the buttons pausing and resuming.  I can't provide exact errors that we had because now that we have tried to reinstall the drivers we get a new series of errors.

  We redownloaded the drivers for OS X 10.6 on HP website and tried to go through the HP setup assistant.  When we arrive at step 'Select printer' and he takes us into the preferences system to add a printer - our printer shows up, but when selected, we get the following error message: some of the software of the printer is missing.  You may not be able to print to "HP Photosmart Plus B209a-m" Please reinstall the printer. software - and of course, we are not able to print.

  We uninstalled and reinstalled the drivers several times without any effect.  The only way that we were able to print off the computer is if printer sharing is enabled on the other Macbook (with OS X 10.8.2).)  Then, it presents itself as a separate printer and can be used by the old Macbook only if the other is on.  This isn't how it was put in place when we had the two work before.

  Any advice would be appreciated.

  Margorie

  What router are you using?  I guess that the 10.8 machine can print correctly?

  Let's start with that on the 10.6 machine: download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• I have adobe CS3 installed on macbook pro, but he said that the license has stopped working... I then went to your website and he advised me to download the license recovery application, which I did, but then when I tried to run this app, it then came wi

  I have adobe CS3 installed on macbook pro, but he said that the license has stopped working... I then went to your website and he advised me to download the recovery of license application, I did, but then when I tried to run this app, it then came with the recovery of the license was not based... How can I get my CS3 works again?  Thank you, Glenn

  Hello

  Please check the help below documents depending on your operating system:

  Error: "License has stopped working". Windows

  Error "Licensing has stopped working". Mac OS

  Hope that helps!

  Kind regards

  Sheena

• Mac user. CS4 still active (not disabled) on my macbook pro DIED. Time Machine installed CS4 on my new macbook pro. Error message, "licensing for this product has stopped working". How can I disable my old macbook pro and activ DEAD CS4

  Mac user. CS4 still active (not disabled) on my macbook pro DIED. Time Machine installed CS4 on my new macbook pro. Error message, "licensing for this product has stopped working".

  How can I disable my old macbook DEAD pro CS4 and activate CS4 on my new mackbook pro?

  Hi Christophe,

  Please visit: https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  Contact technical support for assistance:

  https://helpx.Adobe.com/in/contact.html?step=CCSN_adobe-ID-signing-in_stillNeedHelp

  I hope this helps.

  Concerning

  Megha Rawat

• Adobe CS4 license stopped working on my new Macbook Pro. Error Code 150:30. What should I do?

  I bought the suite Adobe CS4 Web in January 2009.

  I recently bought a new computer (MacBook Pro) and when I try to open Photoshop or Adobe Acrobat, it tells me that the license has stopped working. The message is repeated after you start the computer with the error code: 150:30.

  What should I do?

  Error "Licensing has stopped working". Mac OS

  Be aware, however, that this can not work on OSX 10.7/10.8 due to compatibility issues...

  Mylenium

• Messages stopped working. End of 2011 macbook pro, Os 10.10.5

  Messages has completely stopped working. I have reset my password to icloud and delete old files in the library, but I get a blank screen. I always receive notifications, but can not see them. Cannot access preferences and cannot send a new message. I have attached an edited screenshot of what I see. Any help appreciated. Thank you.

  

  Same thing happened with me last night.  I brought my Imac upstate with me... pluuged in there, and it has stopped working. I was here 3 weeks ago and was not a problem.  Can't access /preferences or / add account.  the files I tried deleting.plst but that no longer works.

• Click force has stopped working

  Hi, I'm on MacBook Pro (15-inch, mid-2015, retina), freshly updated for Sierra, force click has stopped working.

  I have checked all the options, rebooted the system, still no clear sign of what is the problem.

  Does anyone have the same problem? How to check weather force/pad touch works well?

  Any suggestions what to do?

  A pointer more, I also started to use the new keyboard to work, but my memory then click force was working well.

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Function keys row has stopped working after update 10.11.6

  I upgraded my Macbook Pro to El Capitan 10.11.6 last week, and the row function keys have now stopped working.  If someone has had this problem and how can it be solved?

  Thanks in advance for your help (I'm not very tech savvy, so please, responses may be simplistic?)

  The keys work when starting recovery?

  On OS X Recovery - Apple Support

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Target display mode has suddenly stopped working

  I've been using display mode target using a cable thunderbolt between my iMac 21.5 inches (end of 2012) and Macbook Air 13 inch (early 2014) for about six months.

  I had a few weeks off and had to return to find that I can enter is no longer target display mode! When I press Control-F2 on my keyboard connected to my iMac, that nothing is happening. I also tried Fn-control-F2. I tried different ports in case one of them is damaged. But nothing helped.

  Anyone has any suggestions as to why target display mode would have stopped working so suddenly? I really like the feature of double screens between my macbook and iMac and would really like to come back!

  Thank you.

  I know target Display Mode will work, but only if I use the command-f2 from the login screen. After the connection, the command does not work. have you tried?