127fw Lasrejet MFP: HP 127fw and PCL6 or 5

Similar Questions

• HP LaserJet MFP M525 500 and. : felt for drivers HP LaserJet 500 Multifunction (color)

  Hello

  I need to get the drivers for the two following ACM:

  HP LaserJet MFP HP LaserJet 500 Color MFP M575 M525 500

  I need em for Windows 7 Pro 32-bit and 64-bit, preferably 64-bit. I can't find corresponding anythging on HP web pages.

  I don't know if it would work with the Universal Printer PCL6 Drivers?

  Can someone explain me or send me any links where I can download the drivers?

  Thank you very much

  Hello

  M525 download below the full features software (it's for the two 32 64 qnd):

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5118274&swItemId=ds_105339_3&swEnvOid=4063#

  And this link is for the M575:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5118243&swItemId=fp_105434_3&swEnvOid=4063#

  Kind regards

  Shlomi

• Color LASERJET MFP M475dw CYAN and MAGENTA faded 400 HP

  Hello

  We have a HP Laserjet 400 color M475dw MFP, which does not print the Cyan and Magenta fine or full.

  Please see attachment of the status page.

  We have already replaced the high voltage Board.

  The cartridges are placed in the same order as seen on the status page; Cyan a Magenta in the middle.

  I suspect that the intermediate transfer belt.

  Does anyone else have this problem?

  Thank you.

  The ITB was already on the way, we replaced and the problem was solved.

  Thanks for the help.

• Color LaserJet pro 200 M276nw MFP - Scan configuration and installation on Mac Yosemite

  Hi all

  I just bought a new LaserJet pro 200 color MFP M276nw and I am trying (for 4 days) to coorectly install it.

  My goal would be to use it via the wifi connection and I put it correctly by the façade.

  When I try to install the printer on wifi, I can install the printer driver, but I can't find the driver for scanning.

  I tried to connect by ethernet and the system to emphasize a multifunction scanner and the printer driver. If use them, it works correctly.

  Whenever I go out the lan cable for use in wifi it lose the scan functions.

  What I am doing wrong?

  Thank you

  Gianluigi

  Hi @gianluigi1982 ,

  I see that you have problems with scanning via the wireless network, but you can scan through an Ethernet connection.

  I would like to help.

  Do you have what drivers installed the printer? (Apple update or the 10.9 download drivers)

  I checked our laboratory with 10.10 installed on this computer and I was able to browse for printers and Scanners on the wireless network.

  Check the version of the driver installed.

  Go to the Apple preferences system, printers, and Scanners, highlight the Laserjet printers, click the print tab on the right side of the window, and select the Options and supplies.
  Under the general tab it will give the list the version of the driver.
  19.9 is one on the lab.

  Which driver you have show?

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (MFP Laserjet Pro 200 M276)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  In the printers and Scanners window, highlight the printer on the left side, to the right of the window, you should have a print/scan tab, click Scan, and then open Scanners and test scanning. If you do not have the scan tab, let me know.

  

  Have you added the printer as your Hello or via the IP protocol? (cannot scan through the IP Protocol)

  You use the automatic IP address or your own static IP address?

  Here is some information for scanning in OS X v10.10 Yosemite without software HP.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• My M177fw MFP shows paused and will not print, either wireless or with USB

  I try to print wirelessly with my printer HP MFP M177fw.  It shows "ready to print", but does nothing.  If I delete this print job, it shows "printer paused".

  Hi joanieo,

  By your post, I see that you are unable to print to a USB connection or wireless.
  I can help you with this problem.

  I'd do a power reset to see if that will solve the problem.

  When the printer is still lit, disconnect the power cable from the back of the printer.

  Then, disconnect the power cable from the wall outlet.

  Wait 10 seconds and reconnect the power cable to the wall outlet first, then the back of the printer and turn on again.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  For the USB connection, have the printer connected directly to the computer. (not a hub or a docking station)

  It should not be more then 6 feet. Make sure it is a 2.0 and not a 3.0 cable. Also check the ports on the computer, they are 2.0.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  Print a Configuration report.

  What is the IP address?

  Try to print from the computer.

  If you're still having problems, then go through the steps described in this document provided, to see if she will help solve this problem.

  "Printer is off-line" Message appears on the computer and the HP printer does not print.

  Printing and scanning doctor could solve the problem automatically.

  Please provide detailed results if you're still having problems.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Let me know the results of printing and scanning doctor. (error messages, printed test page)

  Good day!
  Thank you.

• Color Laserjet MFP M476dw Pro: Color Laserjet MFP printing PCL XL Error M476dw Pro

  Only, we installed our printer HP Color Laserjet Pro MFP M476dw yesterday and I noticed once it is published a PCL XL Error report instead of what I was printing.  I don't think that anything from him, but today, it happens almost all the time.  I tried to find possible solutions and stumbled upon everyone says to disable AVG...  We do not use AVG, we use MSE.  Is it a driver problem or else?  Any help would be appreciated.  Nothing more annoying than to try to use a new printer and it is not working properly.

  Could be a failure of the trainer.

  If you are using a test pilot a PCL5 PCL6 driver.

• HP Color LaserJet Pro M177 MFP: HP Color LaserJet not able to connect to connected HP

  Hello

  I try to activate my printer (HP Color LaserJet M177fw MFP Pro) ePrint and much more, but I'm not able to do it cause connection problem, I guess.

  When I'm trying to 'print the information sheet', for example, the printer is not able to connect (stay on 'Sign in' loop indefinitely).

  My printer is less than a Vodafone EasyBox router, with firewall disabled and no specific barriers defined by me.

  Should I set some port forwarding (even if they should apply to ignore the firewall, when turned on) or any other specific configuration in the router?

  the same connection problem, of course, it happens when I do touch printer and console web administration, of course.

  In addition, I'll let you know that my router is not blocking access, for example, to-from the web (i.e. I am able to manage my NAS from the outside, since he admitted to a DDNS) and other local devices

  I alreay set 8.8.8.8 and 8.8.4.4 as DNS pri/sec and had an output of cycle after the series of DNS.

  My printer also has a static IP address (defined by the DHCP protocol, based on the MAC address), so not a problem, I think.

  Thanks in advance for your help,

  Lorenzo

  Hi Lorenzo,.

  To enable Web Services fumctionality, you'll need to install the latest firmware on your printer (version 20160525)

  You can locate the current version of your printer by selecting configuration > reports > Page of Configuration, the firmware version is listed under the information section on the printer.

  Updated the firmware on Linux by following these steps, but I don't know if the latest firmware is available for Linux or not, try:

  http://hplipopensource.com/hplip-Web/tech_docs/man_pages/firmware.html

  If the latest firmware is not available for linux, temporarily install the printer on a Windows PC or a my and install the latest firmware:

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

  Kind regards

  Shlomi

• Update of Yosemite and faxes from a colorMFP CM1415fnw

  During the upgrade to Yosemite my MFP will print and scan but is no longer Telec.  Faxes go into a dialog box fax with a forthcoming warning box: you must install the software to use this printer. To install the software, choose software update from the Apple menu. If the software for your printer is not available in software update, contact the manufacturer of your printer. »

  I have the latest update installed before the upgrade to Yosemite.  The download site does not appear a version of the driver available to 10.10, but the HP site shows this MFP as being compatible to Yosemite.

  Any suggestions to get fax back?

  Hey there

  Maybe try restarting the computer and printer and then download the printer driver:

  HP v3.0 for OS X printer drivers

  Then check if you can fax from the computer again.

  I hope that helps

• LaserJet m1132 mfp: what is the best fully functional LASER JET MFP with YOSEMITE

  Hello

  I have a hp laserjet m1132 MFP

  print and copy works fine but scanning produce a white sheet

  looked all over the web, but it seems that this function is not supported by the mac os x 10.10.3 yosemite

  so I need to buy a new printer (all-in-one)

  can anyone recommend a printer already tested with YOSEMITE and all the workers of the service

  scanning is a must for me

  Thanks in advance

  Hello

  Supported scan Yosemite for your printer, try analysis through Capture of Image,

  If it is the program that you want to scan to try to install the latest version of driver below:

  https://support.Apple.com/kb/dl907?locale=en_US

  Also I suggest to try the HP Easy Scan software and check if can provide best results year on year:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Please let me know if any of these steps can help you.

  Shlomi

• The windows firewall settings 7 HP LaserJet MFP M127fw Pro

  Just bought a LaserJet MFP M127fw Pro and having, I think, connection problems.

  A lot of net traffic, but nothing is ever done. I was wondering if the windows firewall is keeps something.

  Activation ePrint attempted, but that doesn't seem to do anything... 20 minutes of "wheels".

  and the printer goes to sleep...

  I am on a 3 MB connection WiFi ISP... I'm just too impatient?

  The firewall settings windows I have to do?

  Any ideas?

  Windows 7 Home Premium 64-bit

  Gigabyte Intel I7 W

  16 GB OF RAM

  Hi @CCcrider

  Welcome to the Forums of HP's Support.  I understand that you can not connect to web services on your LaserJet Pro M127fw printer.

  Please define Manual of the printer an IP address manually and DNS servers.  The steps on how to proceed can be found as "three Solution: the printer of the assign a static IP address" in the document of printer is not maintaining the wireless connection .  For the DNS primary please use 209.244.0.3 and auxiliary DNS, use 209.244.0.4.  These are public DNS servers of Level3.

  Please let me know the results.

• Problem setting up my iPhone, iPad with printer MFP HP 1213

  I have an iMac, MacBook Pro, iPad, iPhone 3, iPhone 4, iPod. Almost all have the iOS responsible henriq. I have also two HP multi function printers: HP LaserJet M1536dnf MFP so MFP HP LaserJet Professional M1213nf. Recently, I downloaded PrinterControl from the iTunes Store and installed on my iPhone, iPad etc. The above two printers are connected on two separate wifi networks. The 1536 printer when I try to connect to my iPhone, the iPad with PrinterControl I am able to print, scan and do everything. All handheld computers are able to immediately recognize the printer. Unfortunately when I try to connect to 1213 all-in-one that is located on another wifi network and is connected to a time Capsule I am unable to do so. The PrinterControl says "no printer found. On the other hand in all the devices of Air print feature is working perfectly fine. I can take my fingerprints of mail and it is recognizing the MFP 1213 easily and get the made impressions.

  Even after through many forums and discussion forums, I couldn't solve the problem. I contacted HP support and said I need to contact Apple support. I also tried and contacted the Apple support which in turn said that because the PrinterControl is a third-party application they will not be able to provide any help/support and Air Print being workinf fine then there is no problem with Apple products. Please help, how to reolve the question and 1213 HP MFP get well with Apple products.

  Hello

  I'm afraid that this behavior is expected because the M1213 is not supported by the HP printer control application.

  You can find this information listed for the HP LaserJet Pro M1210 Multifunction Printer Series within the category Printers HP LaserJet Consumer below:

  http://support.HP.com/us-en/document/c02814760

  Shlomi

• LaserJet pro 126nw: MFP, laserjet 126nw copy function

  I just bought laserjet mfp 126nw pro and I tried the copy function, 15 copies. two problems

  1. some moisure accumulated in the edge of the lid. is this normal?

  2 two times I faced the problem of interference.

  Help, please

  The laser printer uses heat and pressure to place the toner on the page. If there is no moiture in the book and the moisture in the air - the printer can produce steam in the printing process.

  If a number of printing pages, this may be more obvious.

  Please visit the link below for more informaiton

  Steam issuing from the printer

  For the "rocker" paper - try using a new ream of paper that was stored the document makes recommendations.

  If the paper has mosture surplus accumulated in the book itself - it can cause it interference as well.

  I hope this helps.

• Color Laserjet Pro M476dw MFP: HP Color Laserjet MFP printing problems M476dw Pro

  Only, we installed our printer HP Color Laserjet Pro MFP M476dw yesterday and I noticed once it is published a PCL XL Error report instead of what I was printing.  I don't think that anything from him, but today, it happens almost all the time.  I tried to find possible solutions and stumbled upon everyone says to disable AVG...  We do not use AVG, we use MSE.  Is it a driver problem or else?  Any help would be appreciated.  Nothing more annoying than to try to use a new printer and it is not working properly.

  I went to the site HP dl had the HP Universal 5 driver and installed it and now it's printing even more crazy.  I enclose a photo of what he does.  It is not fair to Quickbooks, it does also in PDF, Word, and Outlook.

  

  I shouldn't have as many problems with ANY NEW MACHINE!

  The trainer would be relatively easy to replace, from what I've read your machine should be guaranteed if you need to contact HP support and they can send you another.

  You might even be able to find an authorized service provider who will come out and fix it.

  And if its brand new and you bought it in a store to resume.

• Scan works only on Laserjet M1132 MFP

  I have a problem with scanning on Laserjet M1132 MFP. Print and copy works without problem. But when I try to analyse the scanning application crashes. It says busy and does nothing.

  My OS is Windows 7 64 bit, I tried to update the firmware, but that did not help with the problem. When I try to scan it says busy. In fact, you hear as if the scanner tried to analyze something, but the software does not move and repeat that he is busy.

  No clue as to what could be the problem?

  I found the problem. I had the printer connected to a USB cable for the previous printer (Laserjet 1020) and did not use the original supplied with the M1132MFP.  After I plugged the original cable scanner has started working.

• HP Laser Jet MFP M127fw Pro: How can I enable send/receive faxes "On" or "OFF"?

  I just bought and installed an HP Laser Jet MFP M127fw Pro and I am really impressed so far! However, I can't figure out how to activate the fax answer simply 'on' or 'off', which is my preferred way of handling. Any suggestions? Thank you!

  Hey @BWC3,

  Welcome to the Forum from HP Support.

  I understand that you're looking to configure the settings of your HP LaserJet Pro MFP M127fw fax.  I would like to help.

  Here's what I recommend:

  • In the front panel of your printer, press Setup key
  • Touch Fax Setup
  • Touch basic settings
  • Tap Answer Mode
  • Here you can choose either Manual or Automatic.  'Manual' selected you are essentially turning the fax answer capacity off and "Automatic" would naturally be the setting 'on '.

  Let me know if you need help - I'm always happy to help you.

  Have a great weekend!