15r110na: BCD. Fault LOG

Similar Questions

• You will need to delete bootmgr and BCD BCD. OPEN A SESSION?

  I just reinstalled Windows Vista, with three connected drives. It is installed on C, that he should have, but also installed a startup folder, the folder System Volume Information and bootmgr onto what was formerly as the I drive. I went to rename it, as he had become E due to the reinstall, but it obviously wouldn't let me do that. I disconnected the two non-windows disks and reinstalled again (the computer refused even startup in Windows with the drive E unplugged despite everything being on C), but it will not let me delete bootmgr and BCD BCD. NEWSPAPER, or in the System Volume Information folder. I found something to the subject to appropriate files and used that to get rid of most of the contents of the startup folder, but could not be owner of the SVI folder, the command prompt was obviously be raised upward by the word "Volume" or something and the BCD, BCD. LOG files and bootmgr insist they are in use. The computer starts very well without that drive plugged in, however.

  How can I get rid of these files/folders?

  Hello

  I suggest to back up all your personal data and make sure you have all the applications on CD/DVD for resettlement.

  Then boot from the Windows installation disk and reformat both drives. Install Windows on the c: drive and leave the other space as unallocated (this will allow Windows format the drive).

  Installation and reinstallation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

   

  I hope this helps.

• seeing cRIO of State flashes 4 times, but the prog works well until you restart cRIO

  I have a cRIO 9073 with a significant program in RT and FPGA, using a front-end for Windows communicating using the network of shared on the cRIO variables.  Great short program if I simply deploy the RT VI main (with of course built FPGA code), or if I deploy the RT version.  However, if I select 'run as starting", works to deploy on the main façade of RT VI opens and I see activity (it works very well), but then I click to restart the cRIO, and the cRIO restarts only to run for a second or two before the status light blinks 4 times (soft error).

  I doubt it's a problem of memory as suggested by the manual as if it were the case, I expect the deployed application would fail as well, but it works very well.  I have check the fault log and see nothing useful.  I see also on the deployment of the cRIO dialog box has ~ 12 MB free after the deployment, if I deploy against a target with the "NOR-RIO 3.6.0" software - January 2011, and further if I use a minimum package with additional components, I need (network engine Variable and editor of State system).

  It was a project of years which worked beautifully and recently required change.  In the meantime, my development PC has been updated with Windows 7 64 bit.  I am running LabVIEW 2010 SP1 Professional Development System with RT and FPGA packages.  CPU utilization on the cRIO when I run the deployed application (with the cover available for diagnostics) is about 20%.

  Any suggestions?

  Thank you

  Erik

  I found my problem, and it was mine and not Windows.

  I ended up using the Console output for help and saw Exception Code 6 (0 x 00000006) appear on the console, ultimately ending with Safe Mode - software in Max error message unfortunately, I can't find anything looking for this exception code, so I went back and looked at my VI in real-time , and I found my problem: I had added two new network static Variables (NSV) and had not fixed the reference to the Relative target Mode. I have so many DRVS in this VI that I had not also wired their outputs error to an indicator for troubleshooting.  Since I have it, but even that resulting in still mode safe, if I have returned the absolute reference Mode.

  I suspect that the VI has run in interactive mode, as the project was the IP address of the cRIO set when the RT build was made and later failed, because the IP address changed when the cRIO was on the network.  Oddly, I had a lot more luck for the cRIO to run in mode interactive (then disconnect from it) if my PC and the cRIO were connected by a crossover cable, and both have been using link-local addressing.  In this way, I could get my project running every time.  When I later tried connecting via the network, it is when same interactive mode would fail most of the time.

  Unfortunately, a mini-project, I created to test this situation was not the issue - it could not run (if I built the RT build by setting the IP address of the target to an imaginary device) or ran very well (if I put the address IP target correctly prior to construction), but never caused the cRIO enter Safe Mode.

  What I want to know is, can be an option somewhere to make all default DRVS for the target Relative to the reference Mode?  I have not yet used an intentionally used this absolute addressing.  I also recommend to the reference on the NSV Mode indicator something more obvious than a tiny symbol OR in the lower left corner.

  Thank you

  Erik

  P.S. I created a support for this request and the console log provided to support engineer if this is useful.

• DC United Kingdom language reader

  This isn't really a question or discussion - it's a fault log.

  When the download and installation of Adobe Reader DC English (United Kingdom), you get actually...

  Ukrainian.

  Obviously, content management people have linked the installer wrong or incorrectly named Installer (would probably be GB, not UK).

  Please sort...

  Hi TIC.

  Try to download using the following link: http://get.adobe.com/reader/enterprise/

  Kind regards
  Rahul Tyagi

• Error when you turn on logging of FT - a general system error: vmodl.fault.MethodNotFound

  When I try to France Télécom enabled logging on a VMkernel port, I get-

  "a general error occurred: vmodl.fault.MethodNotFound.

  My servers are compatible with FT and they pass all the tests in the survey tool of Site except the obligation to enable the logging of FT. I tried activating FT by connecting to two different brands of servers with two different physical cards and I get the same results. The network adapters are connected to a switch and vSphere says they are running at 1000 Mb. I can enable VMotion on the same NETWORK card without problem. I put the FT logging NIC on its own subnet and I tried to FT in connection with the server inside or outside the cluster HA allowed. I also sub for FT (eval). I tried to restart vCenter and the ESX host to anything will do.

  Please help me to get logging enabled FT - I really want to try FT!

  Thank you, David Davis

  I'm not an expert in this. But it looks like an installation problem. Could be that your VC and esx versions are not compatible?

• Log on to the fault: "the user profile Service service has no logon. User profile cannot be loaded.

  have a 610 Compaq with Vista Business - can not log - message reads "the user profile Service service has no logon. User profile cannot be loaded.

  have a 610 Compaq with Vista Business - can not log - message reads "the user profile Service service has no logon. User profile cannot be loaded.

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• Error - permission to perform this operation was denied - Log: failed agent: converter.fault.IncorrectCredentialsFault

  What is strange to me, is that I know that I am using the correct credentials and my account is the local administrator for the target computer group.

  Note these two, seemingly contradictory, journal entries:

  2014 02-19 T 08: 05:08.856 - 08:00 [info 06688 "Default"] [user, 874] user authenticated successfully ZOOMSYSTEMS\Peter.Bollwerk - priv of: 1

  2014 02-19 T 08: 09:14.117 - 08:00 [error 02568 'Default'] [agentManager, 95] [AgentManager] install Agent failed: converter.fault.IncorrectCredentialsFault

  This section can be found in the journal mistletoe:

  2014 02-19 T 08: 11:55.909 - 08:00 [error 02612 'wizardController"] must be physical computer to access administrator

  What I'm missing here?

  I checked that I have the administrator rights on the source and target computers.

  I'm using the correct credentials.

  I use the Standalone converter 5.5.

  OK, so you must use local Administrator named "Administrator". Generally, the problem is that the administrator is not the real administrator until confirm you the action (when UAC is enabled). Converter uses many features that requires administrative privileges.

• Entry Windows - Faulting module name event log: Converter - agent.dll - after the partition of 100 MB WIn2008 R2 online

  Hello

  Since my installation of Windows 2008 R2 (Web edition server) use the restore system 100 MB partition, I had to use this fix for this:

  VMware KB: A Windows 2008 R2 machine P2V Conversion fails at 96%

  to allow VMWare Converter (last 5.1) to also copy this partition but I never did because when I changed status od this partition to the online converter always stops on the connection to the machine Powered-> this local machine with the error "Unable to obtain material information for selected computer.". I noticed input error to the Windows Application event log that contains:

  Name of the failing application: vmware - converter.exe, version: 8.1.0.15346, time stamp: 0 x 51642354

  Name of the failed module: Converter - agent.dll, version: 8.1.0.15346, time stamp: 0 x 51642321

  Exception code: 0xc0000005

  Offset: 0x00084bbe

  ID of the process failed: 0x19d4

  Start time of application vulnerabilities: 0x01ce7402f38eeb43

  The failing application path: C:\Program Files (x 86) \VMware\VMware vCenter Converter Standalone\vmware - converter.exe

  Path of the failing module: C:\Program Files (x 86) \VMware\VMware vCenter Converter Standalone\converter - agent.dll

  Report ID: 7d2c66a6-dff6-11e2-ab7e-000c29da83b7

  There is also an entry of information:

  The description for event ID 1 source vmware-converter-worker is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  VMware-converter-worker service started

  When I reboot the system and not to make agent system Converter online 100 MB recovery partition does not hang and I can perform the conversion without this small partition.

  Any ideas?

  Concerning

  Hello

  I'm back with the log file. The log contains only the related situation this topic. Before you start the new operation of conversion, I have removed all previous logs.

  Concerning

  EDIT: I checked the file workers journal and information:

  [PopulateVolumeProperties] \\?\Volume{90f40b30-30cd-11e2-849d-000c29da83b7}\ volume is the name of the \Device\HarddiskVolumeShadowCopy1 device.

  MEM > 2013 - 07 - 07T 22: 40:47.140 + 02:00 [info 06288 'Default'] [GetDriveLetterOrMountPoint] Mount point of volume \\?\Volume{90f40b30-30cd-11e2-849d-000c29da83b7}\ is \\?\Volume{90f40b30-30cd-11e2-849d-000c29da83b7}\

  MEM > 2013 - 07 - 07T 22: 40:50.881 + 02:00 [06288 panic "Default"] (recursion level Log 2) Win32 exception: Access Violation (0xc0000005)

  showed me where is the problem. I managed diskshadow.exe and executed delete conceals the entire operation. Now I can go ahead with the conversion. Thank you

• can get web address, but it will not Sara t log into it, at the bottom of page fault symbol rises

  When trying to connect in my chess club of the page but login box does not work, at the bottom of the screen, it is said that he has to wait for the response & error symbol appears for this page

  Hello

  ·         What operating system is installed on your computer?

  ·         What browser do you use?

  ·         You did changes to the computer before the show?

  ·         The problem happens only with the mentioned Web site or all sites?

  I suggest you follow the link that speaks of Web sites may not behave as expected in Internet Explorer and check if this solves the problem of: below

  http://support.Microsoft.com/kb/956197

• Conversion of physical Windows 7 machine fails during the reconfiguration with converter.fault.FileCreationFault

  Hello

  first of all, thank you for providing tools such as vCenter Converter for free.

  I tried to convert a physical machine to Windows 7 using the current vCenter Converter Standalone (version = 4.3.0 build = build-292238). The target of the conversion is an external USB disk. I am to convert the entire machine, including a disc of about 280 GB in size.

  The conversion takes more than 24 hours, but seems to work quite well. Right after training is converted (to about 98% of the whole process), the conversion fails during the reconfiguration with the following error message:

  Unexpected exception: converter.fault.FileCreationFault

  -ERROR - convert: converter.fault.FileCreationFault

  {(converter.fault.FileCreationFault)

  dynamicType = < unset >

  faultCause = (vmodl. NULL in MethodFault),

  file ="
  .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$ «»

  MSG = ""

  }

  There is no other message log of the recent in the converter - server.log. The converter - worker.log says:

  from reconfiguring the system...

  using temp dir C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig

  ReconfigurationTransaction: cached reviews system volume

  LocalPathToGuestSystemFolder:
  .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\

  LocalUndoFolder:
  .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$

  Cannot create undo file

  Cleaning up the C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig temp directory...

  TaskImpl failed with MethodFault::Exception: converter.fault.FileCreationFault

  Task failed:

  Scheduled timer cancelled, succeeds StopKeepAlive

  Completed task: Task 3

  InternalTask2VmomiTaskAdapter updates, States: 4, percentage: 0, xfer rate (Bps): < unknown >

  Creation of vmx file Analyzer

  BaseParserImpl::Parse Config info is not cached

  F:\VM\wartberg\wartberg.vmx analysis

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  Registry hive
  . \vstor2-mntapi10-shared-468030AD0004C435020000000C000000
  Boot\BCD is responsible under the name mntApi397493888030118019

  Error 13 read the value of the element of key mntApi397493888030118019\Objects\ {9dea862c-5cdd-4e70-acc1-f32b344d4795} \Elements\24000001

  MntApi397493888030118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi398445489630118019

  2 error reading value CSDVersion key mntApi398445489630118019\Microsoft\Windows NT\CurrentVersion

  2 error reading information SP

  CurrentType key is multiprocessor free

  2 error reading CurrentType mntApi398445489630118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value

  2 error reading 64 bits of information, probably not a 64-bit system

  the product name is Windows 7 Home Premium

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi404763500730118019

  Error reading the mntApi404763500730118019\ControlSet001\Services\vmxnet - 2.

  Error 2 vmxnet information, assuming that vmxnet is not installed

  MntApi404763500730118019 hive unloaded

  MntApi398445489630118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi406994304730118019

  MntApi406994304730118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi419224726130118019

  2 error reading value CSDVersion key mntApi419224726130118019\Microsoft\Windows NT\CurrentVersion

  2 error reading information SP

  CurrentType key is multiprocessor free

  2 error reading CurrentType mntApi419224726130118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value

  2 error reading 64 bits of information, probably not a 64-bit system

  the product name is Windows 7 Home Premium

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi425417937030118019

  Error reading the mntApi425417937030118019\ControlSet001\Services\vmxnet - 2.

  Error 2 vmxnet information, assuming that vmxnet is not installed

  MntApi425417937030118019 hive unloaded

  MntApi419224726130118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi427773541230118019

  MntApi427773541230118019 hive unloaded

  Failed to get the volume mount points 640 (03 = * 00 > 7000000000000: 4146 (type = 2, code = 259))

  VMOUNT library: 1450 error communication error with the pilot while

  Error 1016 (hive to load error: unknown error 1016 (0x3f8) (1016)) temporary hive loading
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE under the name of the mntApi367215230118020 key.

  Unable to load the registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE, error 0x3f8.

  Error 16258 when you open the software hive

  Failed to get the volume mount points 640 (03 = * 5320000000:00404, 16258 (type = 2, code = 1016))

  MNTAPI Info OS: Microsoft Windows 7 Home Premium edition: root of home: Windows Service Pack: worm 0: 6.1

  OS resides on the disk partition 2 F:\VM\wartberg\wartberg.vmdk path

  BaseComputerImpl::Open configuration file: F:\VM\wartberg\wartberg.vmx

  WorkerConvertTask: production bundle task agent for task with id = 'task 3 '.

  bundle of newspaper http://Converter.Agent.DiagnosticManagerImpl[task-3] Generating task.

  http://Converter.agent.DiagnosticManagerImpl creation bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."

  http://Converter.agent.DiagnosticManagerImpl adjusted bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."

  WorkerConvertTask: recovery agent special newspaper bundle to "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip".

  http://Converter.agent.DiagnosticManagerImpl recovery bundle of newspaper with key ' task-3 - qfyxaphl.zip "at offset = '0' and max size ="11155.

  WorkerConvertTask: Bundle successfully retrieved from "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip"

  Task failed:

  Scheduled timer cancelled, succeeds StopKeepAlive

  Completed task: task-1

  bundle of newspaper http://Converter.Worker.DiagnosticManagerImpl[task 1] Generating task.

  As the conversion took more than 24 hours, I would be happy to learn how to avoid this problem or even how to save the VM already created (I don't know if this is possible, but at least the virtual machine appears to be underway, but then crashes saying that a required device is not present).

  Any help is appreciated!

  Thank you

  nepper

  OK - I'll upload versions changed in maybe 15 minutes

  muss weg kurz

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Skype segmentation fault - 4.0.0.7 - r2

  Hello

  I've just updated my Skype Linux based on Gentoo for Skype - 4.0.0.7 - r2 of sources.

  Skype does not start after that little start up. I get the "segmentation fault" if I run it from the terminal. And get the tail the log like this:

  kernel: Skype [4569]: Segfault at 0807dc0d sp bfd4c720 error ip 3f 6 in Skype [8048000 + 19ba000]

  Then I reinstall it and working fine until a couple of starts. Then it will repeat.

  Y at - it an idea to fix it? Or should I just use for the old one version, that works so - so?

  Behavior very srtange Skype executable. It changes during execution. So, there is a decision (http://forum.xakep.ru/m_2657618/tm.htm):

  chmod w/opt/bin/skype

  or

  chmod w/usr/bin/skype

  Depending on your distribution.

• MBP (retina 2015) [with LOG] kernel panic

  Hi everyone, today I had my first kernel panic on my MBP early 2015 with OS X El Capitan retina finally release.

  I closed the laptop (stop) last night and when I wake it today it I had to turn it on and when it started I got the following message is displayed:

  "your computer has restarted due to a problem"

  Here is the log of the kernel Panic, I hope that someone could tell me what may be the cause.

  Anonymous UUID: 597AE05A-BD2C-656B-008B-1B9BE5E6A008

  Sat Jan 23 18:55:14 2016

  Panic report *.

  panic (cpu 0 0xffffff801cdd155a appellant): Kernel trap at 0xffffff7f9e0e03fa, type 14 = page fault, registers:

  CR0: 0X000000008001003B, CR2: 0X00000000000000BF CR3: 0X000000001FF2C000 CR4: 0X00000000003627E0

  RAX: 0 X 0000000000000000, RBX: 0XFFFFFF80413B7B00 RCX: 0XFFFFFFFE245A79D2 RDX: 0 X 0000000000000001

  RER: 0XFFFFFF8029603CF0, RBP: 0XFFFFFF8029603D00, IHR: 0XFFFFFF8037DF9000, RDI: 0XFFFFFF80413B7B00

  R8: 0XFFFFFF802EFF0000, R9: 0 X 0000000000010001, R10: 0XFFFFFF801D4E0B78 R11: 0 X 0000000000000241

  R12: 0XFFFFFF80410E1800, R13: 0XFFFFFF7F9E0971A0, R14: 0 X 0000000000100004, R15: 0XFFFFFF8037DF9000

  RFL: 0 X 0000000000010286, RIP: 0XFFFFFF7F9E0E03FA, CS: 0000000000000008, SS 0 X: 0 X 0000000000000000

  Lack of CR2: 0x00000000000000bf, error code: 0 x 0000000000000000, CPU error: 0x0, PL: 0

  Backtrace (CPU 0), frame: return address

  0xffffff8029603980: 0xffffff801ccde792

  0xffffff8029603a00: 0xffffff801cdd155a

  0xffffff8029603be0: 0xffffff801cdef233

  0xffffff8029603c00: 0xffffff7f9e0e03fa

  0xffffff8029603d00: 0xffffff7f9e167adb

  0xffffff8029603d40: 0xffffff7f9e163f24

  0xffffff8029603d60: 0xffffff801d2b7288

  0xffffff8029603dd0: 0xffffff7f9e163eab

  0xffffff8029603e10: 0xffffff801d291cd3

  0xffffff8029603e30: 0xffffff801d28f555

  0xffffff8029603e60: 0xffffff801d28fac4

  0xffffff8029603ee0: 0xffffff7f9d9e62b2

  0xffffff8029603f00: 0xffffff801cd12afa

  0xffffff8029603fb0: 0xffffff801cdcbf77

  Extensions of core in backtrace:

  com.apple.iokit.IOUSBHostFamily (1.0.1) [2E215465-71AC-3DE4-B0A5-27BE9C329936] @0 x ffffff7f9d9d0000-> 0xffffff7f9da38fff

  dependency: com.apple.driver.AppleUSBHostMergeProperties (1.0.1) [B7C676A8C]@0xffffff7f9d9cc000 34EB02C0-AEE5 - 3 to 74-BEC5-6 b 5

  com.apple.iokit.IOBluetoothFamily (4.4.3f4) [4EA7F8AD-059A-35A3-8156-2B0CD392422B] @0xffffff7f9e093000-> 0xffffff7f9e14ffff

  dependency: com.apple.iokit.IOReportFamily (31) [00ECF188-29A2-3C48-B4DD-B155077F7B3C] @ ff7f9defd000 0xffff

  com.apple.iokit.IOBluetoothHostControllerUSBTransport (4.4.3f4) [EC49CAE1 - 7 d 48-3 to 7F-B893-FDE1E66D8BCD]@0xffffff7f9e163000-> 0xffffff7f9e18cfff

  dependency: com.apple.iokit.IOBluetoothFamily (4.4.3f4) [4EA7F8AD-059A-35A3-8156-2B0CD392422B] @0xffffff7f9e093000

  dependency: com.apple.iokit.IOACPIFamily (1.4) [CBAE26D8-0ACB-3C1F-8347-FDCA67EC40B3] @0xfffff f7f9dbd3000

  dependency: com.apple.iokit.IOPCIFamily (2.9) [6ADFE830-2986-35D2-8C2F-6ABEDBC94F6A] @ 7f9d52c000 0xffffff

  dependency: com.apple.iokit.IOUSBHostFamily (1.0.1) [2E215465-71AC-3DE4-B0A5-27BE9C329936] @0 x ffffff7f9d9d0000

  Corresponding to the current thread BSD process name: kernel_task

  Mac OS version:

  15 C 50

  Kernel version:

  15.2.0 Darwin kernel version: Fri Nov 13 19:56:56 PST 2015; root:XNU-3248.20.55~2/RELEASE_X86_64

  Kernel UUID: 17EA3101-D2E4-31BF-BDA9-931F51049F93

  Slide kernel: 0x000000001ca00000

  Text of core base: 0xffffff801cc00000

  Text __HIB base: 0xffffff801cb00000

  Name of system model: MacBookPro12, 1 (Mac-E43C1C25D4880AD6)

  Availability of the system in nanoseconds: 215269636717253

  last load kext to 188534286013193: com.apple.driver.AppleBluetoothHIDKeyboard 181 (addr 0xffffff7f9f7eb000 size 12288)

  Finally unloaded kext to 117393964075499: com.apple.driver.IOBluetoothHIDDriver 4.4.3f4 (addr 0xffffff7f9f72b000 size 73728)

  kexts responsible:

  com.apple.driver.CoreStorageFsck 517.20.1

  com.apple.driver.AppleUSBStorageCoexistentDriver 3.7.1

  com.apple.iokit.SCSITaskUserClient 3.7.7

  com.apple.iokit.IOBluetoothUSBDFU 4.4.3f4

  com Apple.filesystems.smbfs 3.0.0

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AGPM 110.20.21

  com.apple.driver.ApplePlatformEnabler 2.6.0d0

  com.apple.driver.X86PlatformShim 1.0.0

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleHDA 272.51.3

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.iokit.IOBluetoothSerialManager 4.4.3f4

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleIntelBDWGraphics 10.1.2

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleLPC 3.1

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.driver.AppleSMCLMU 208

  com.apple.driver.AppleCameraInterface 5.41.0

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleIntelBDWGraphicsFramebuffer 10.1.2

  com.apple.driver.AppleBacklight 170.8.3

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.AppleUSBCardReader 3.7.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.AppleTopCaseHIDEventDriver 86

  com.apple.driver.AirPort.Brcm4360 1020.17.1a1

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleBluetoothHIDKeyboard 181

  com.apple.driver.IOBluetoothHIDDriver 4.4.3f4

  com.apple.iokit.IOUSBMassStorageClass 4.0.2

  com.apple.driver.AppleXsanScheme 3

  com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com Apple.kext.Triggers 1.0

  com.apple.driver.DspFuncLib 272.51.3

  com.apple.kext.OSvKernDSPLib 525

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOSurface 108.0.1

  com.apple.driver.AppleGraphicsControl 3.12.6

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.iokit.IOBluetoothFamily 4.4.3f4

  com.apple.driver.AppleHDAController 272.51.3

  com.apple.iokit.IOHDAFamily 272.51.3

  com.apple.iokit.IOAudioFamily 204.3

  com.apple.vecLib.kext 1.2.0

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.AppleGraphicsDeviceControl 3.12.6

  com.apple.iokit.IOAcceleratorFamily2 203.14

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.driver.CoreStorage 517.20.1

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  com.apple.driver.AppleHIDKeyboard 181

  com.apple.driver.AppleMultitouchDriver 304.10

  com.apple.driver.AppleHIDTransport 5

  com.apple.driver.AppleHSSPIHIDDriver 41.7

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 5.1.0

  com.apple.iokit.IO80211Family 1110.26

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.driver.AppleHSSPISupport 41.7

  com.apple.driver.AppleIntelLpssSpiController 2.0.59

  com.apple.driver.AppleIntelLpssGspi 2.0.59

  com.apple.driver.AppleIntelLpssDmac 2.0.59

  com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBXHCI 1.0.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417.1

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Concerning

  If the panic occurred only once, and there is no repetition in at least a few thousand hours of use, I suggest you ignore it.

• Kernel panic log analysis request

  Hi guys,.

  Is there anyone who wishes to take a brief look on my my log of kernel panic? I can't find me guilty.

  It presents a curiosity I can think about and it's 3rd ram (16GB) party in my 13 "MacbookPro mid-2012 (not retina).

  I was running 3 MIDI controllers when it happened, but it happened without any attached devices.

  It seems that I get more and more of them these last time. Once a month or twice a week now.

  I know that Apple does not suggest an update of 16 GB of ram for this particular model, but I wonder what if there's something else miss me.

  Any help is appreciated. I can't imagine how he would feel if this would happen in a show...

  Kind regards

  Wouter

  Amsterdam

  Anonymous UUID:

  495D1992-78F5-9B80-20FD-44D97427AFB3

  Mar 8 18:30:33 dec 2015

  Panic report *.

  panic (cpu 0 0xffffff8022016df2 appellant): Kernel trap at 0xffffff8021fce6b6, type 14 = page fault, registers:

  CR0: 0 X 0000000080010033, CR2: 0XFFFFFF8F63239028 CR3: 0X000000039C70A08B CR4: 0X00000000001626E0

  RAX: 0XFFFFFF7F80000000, RBX: 0XFFFFFF803F8C9900 RCX: 0XFFFFFF7F80000028 RDX: 0X0000000FE3239000

  RER: 0XFFFFFF820B393CE0, RBP: 0XFFFFFF820B393D10, IHR: 0X000000004A561F92, RDI: 0XFFFFFF8026684FD0

  R8: 0XFFFFFF8061D6E1B0, R9: 0 X 0000000000000000 R10: 0 X 0000000000000064, R11: 0X0000000123C2E748

  R12: 0XFFFFFF8026684FD0, R13: 0XFFFFFF80254EC000, R14: 0 X 0000000000001000, R15: 0XFFFFFF805EF22780

  RFL: 0 X 0000000000010206, RIP: 0XFFFFFF8021FCE6B6, CS: 0000000000000008, SS 0 X: 0 X 0000000000000000

  Lack of CR2: 0xffffff8f63239028, error code: 0 x 0000000000000000, CPU error: 0x0

  Backtrace (CPU 0), frame: return address

  0xffffff820b393990: 0xffffff8021f2ad21

  0xffffff820b393a10: 0xffffff8022016df2

  0xffffff820b393bd0: 0xffffff8022033ca3

  0xffffff820b393bf0: 0xffffff8021fce6b6

  0xffffff820b393d10: 0xffffff8021f984f9

  0xffffff820b393f20: 0xffffff8022017354

  0xffffff820b393fb0: 0xffffff8022033bb5

  Corresponding to the current thread BSD process name: firefox

  Mac OS version:

  14F1021

  Kernel version:

  14.5.0 Darwin kernel version: kills Sep 1 21:23:09 PDT 2015; root:XNU-2782.50.1~1/RELEASE_X86_64

  Kernel UUID: 06D286E3-A8A1-3BE7-A7EB-EAC6E0C69758

  Slide kernel:

  0x0000000021c00000

  Text of core base: 0xffffff8021e00000

  Text __HIB base: 0xffffff8021d00000

  Name of system model: MacBookPro9, 2 (Mac-6F01561E16C75D06)

  Availability of the system in nanoseconds: 11792382879093

  last load kext to 10908610816250: com.apple.driver.AppleUSBAudio 295.23 (addr 0xffffff7fa485b000 size 315392)

  Finally unloaded kext to 11009644706463: com.apple.driver.AppleUSBCDC 4.3.3b1 (addr 0xffffff7fa4857000, size 16384)

  kexts responsible:

  com.paceap.kext.pacesupport.snowleopard 5.9

  com.apple.driver.AudioAUUC 1.70

  com.apple.iokit.IOBluetoothSerialManager 4.3.6f3

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AGPM 110.19.6

  com.apple.driver.X86PlatformShim 1.0.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleHDA 272.18.3

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleMikeyDriver 272.18.3

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.driver.AppleBacklight 170.7.4

  com.apple.driver.AppleIntelHD4000Graphics 10.0.6

  com.apple.driver.AppleThunderboltIP 2.0.2

  com.apple.driver.AppleMCCSControl 1.2.12

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.driver.AppleSMCPDRC 1.0.0

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHWAccess 1

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleIntelFramebufferCapri 10.0.6

  com.apple.driver.AppleSMCLMU 2.0.7d0

  com.apple.driver.AppleLPC 1.7.3

  com.apple.driver.SMCMotionSensor 3.0.4d1

  com.apple.driver.AppleUSBTCButtons 240.2

  com.apple.driver.AppleUSBTCKeyboard 240.2

  com.apple.driver.AppleIRController 327,5

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 36

  com.apple.driver.AppleUSBHub 705.4.2

  com.apple.iokit.SCSITaskUserClient 3.7.5

  com.apple.driver.XsanFilter 404

  com.apple.iokit.IOAHCIBlockStorage 2.7.1

  com.apple.driver.AirPort.Brcm4360 930.37.3

  com.apple.driver.AppleSDXC 1.6.5

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.iokit.AppleBCM5701Ethernet 10.1.3

  com.apple.driver.AppleAHCIPort 3.1.2

  com.apple.driver.AppleUSBXHCI 710.4.11

  com.apple.driver.AppleUSBEHCI 705.4.14

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleACPIButtons 3.1

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 3.1

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 161

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com.apple.driver.AppleUSBAudio 295.23

  com.apple.iokit.IOSerialFamily 11

  com Apple.kext.Triggers 1.0

  com.apple.driver.DspFuncLib 272.18.3

  com.apple.kext.OSvKernDSPLib 1.15

  com.apple.iokit.IOSurface 97.4

  com.apple.driver.AppleHDAController 272.18.3

  com.apple.iokit.IOHDAFamily 272.18.3

  com.apple.iokit.IOAudioFamily 203.3

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.AppleSMBusController 1.0.13d1

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.driver.AppleSMBusPCI 1.0.12d1

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.iokit.IOUSBUserClient 705.4.0

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.iokit.IOBluetoothFamily 4.3.6f3

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.iokit.IOAcceleratorFamily2 156.16

  3.10.25 com.apple.AppleGraphicsDeviceControl

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.IOPlatformPluginFamily 5.9.1d7

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.AppleUSBMultitouch 245.2

  com.apple.iokit.IOUSBHIDDriver 705.4.0

  com.apple.driver.AppleUSBMergeNub 705.4.0

  com.apple.driver.AppleUSBComposite 705.4.9

  com.apple.driver.CoreStorage 471.30.1

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.5

  com.apple.iokit.IOBDStorageFamily 1.7

  com.apple.iokit.IODVDStorageFamily 1.7.1

  com.apple.iokit.IOCDStorageFamily 1.7.1

  com.apple.driver.AppleThunderboltDPInAdapter 4.0.6

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  3.1.7 com.apple.driver.AppleThunderboltNHI

  com.apple.iokit.IOThunderboltFamily 4.2.2

  com.apple.iokit.IOAHCISerialATAPI 2.6.1

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5

  com.apple.iokit.IO80211Family 730.60

  4.5.8 com.apple.iokit.IOFireWireFamily

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com.apple.iokit.IOAHCIFamily 2.7.5

  com.apple.iokit.IOUSBFamily 720.4.4

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 398

  com.apple.iokit.IOStorageFamily 2.0

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 3.1

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Model: MacBookPro9 2, MBP91.00D3.B0B of BootROM, 2 processors, Intel Core i5, 2.5 GHz, 16 GB, MSC 2.2f44

  Graphics card: Intel Graphics HD 4000, 4000, Intel HD graphics card integrated

  Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x029E, 0x434D5341384758334D314131363030433131

  Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x029E, 0x434D5341384758334D314131363030433131

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (7.15.166.24.3)

  Bluetooth: Version 4.3.6f3 16238, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: Samsung 850 EVO 500 GB, GB 500,11 SSD

  Serial ATA Device: MATSHITADVD-R UJ - 8à8

  USB device: Hub

  USB device: Hub

  USB device: Apple keyboard / Trackpad

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB Device: IR receiver

  USB device: Hub

  USB device: USB 2.0 Hub

  USB device: USB 2.0 Hub

  USB device: USB receiver

  USB device: Keystation Mini 32

  USB device: Akai APC40

  USB device: FaceTime HD camera (built-in)

  Bus crush: MacBook Pro, Apple Inc., 25.1

  I certainly would test the MBP with the original RAM to see if panic stops.  There is no reason why the MBP will not work with 16 GB of RAM, unless you bought the RAM of dubious quality.  MAS are very selective with respect to the RAM and the best sources of RAM compatible Macs are OWC and Crucial.

  Also unplug all devices.  Add them one by one and see if one of them is the "problem child".  (the Akai APC 40 is a possible candidate)

  Ciao.

• Error: 0xc000012f and the KERNEL DATA PAGE FAULT

  My son has a laptop of game.  Since last week, he experienced extreme problems.  A constant if the following errors: 0xc000012f and the KERNEL DATA PAGE FAULT.  Although I'm not technologically savvy, I tried the obvious in running virus scan and visiting different communities for troubleshooting tips.  When you run the antivirus (paid service) analysis, the system hangs and the system restarts.  I attended ASUS website in the hope of getting more advice than to have to provide access to the laptop of my son to a technician who gave me some insurance for the better part of 45 minutes that he help and troubleshooting problems.  He highlighted a very detailed chart of downtown action (reliable?), which looked pretty serious.  Suffice it to say, the conversation ended when he asked a one-time fixed fee of $200.  When I refused, he went to stop everything.  I would simply like to take any action that will further damage the laptop of my son. I paid $3K for this system.  Is someone can you please help me solve these problems?  I was going to buy a registry cleaner but was informed in an online community chat room not to do so that these products are not reliable.  Thank you all in advance for your review and taking the time to help me.

  Original title: need assistance immediately please.

   We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found here

  If you have any questions regarding the procedure, please ask

  
  

  I find the files DMP prayed and tried their zip.  I received the following: file not found or no read permission.

  I took it to a repair shop for yesterday I had to argue that these issues were well beyond my skill level.  The owner of the store insisted that the 'hard drive' was "fried".  It was agreed to replace the necessary parts (gave me a "Crucial - M4 Solid State Drive - 128 GB), this is the info on the box, to replace my 750Go son.  He said that, even if was less "room" it would "fly".  The original price was $ 200 and climbing!  Give me the question my faith in humanity at this time.  Is not relevant to the prey on someones lack of knowledge.  You and the other hand, all those who try to make a difference... who are trying to help is welcomed.  I wish offered troubleshooting would come to maturity.  Nonetheless, I humbly thank you for your support and follow-up in this case.

  I took it to a repair shop for yesterday I had to argue that these issues were well beyond my skill level.  The owner of the store insisted that the "hard drive"was"French fries".»  It was agreed to replace the necessary parts (gave me a "Crucial - M4 Solid State Drive - 128 GB - INFORMATION ON LISTED), to replace my 750Go son.  He said that even if it was less "room" it would "fly".  The original quoite was $ 200 and climbing! Give me the question my faith in humanity at this time.  Seems very inappropriate to prey on someones lcak of knowledge.  You on the other hand and those who try to make a difference... who are trying to help, should be commended.  I wish offered troubleshooting would come to maturity.  Nonetheless, I humbly thank you for your support and follow-up in this case.

• ; EXPLORER caused a page invalad fault in EXPLORER. EXE

  After I log a message says; "EXPLORER caused a page fault in EXPLORER. "EXE" to 0167:00401F31 (WIN98), I can solve this problem on mine?

  [Transferred from Internet Explorer]

  Hey Missouri,

  Thanks for the reply.

  You get the error while connecting to the computer or when you use a Web page? You connect to any website?

  How to reinstall or repair Internet Explorer in Windows 7, Windows Vista and Windows XP

  http://support.Microsoft.com/kb/318378

  Please see the link to improve the performance of XP:

  Maintenance tasks that improve performance

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please post back with the result. If the problem is still not resolved, I will be happy to help you further.