screen goes black instead of the newspaper showing

Similar Questions

• HP 2000 laptop screen goes black after entering the password

  After I enter password screen goes black

  Ok. I'm in the menu boot options. I have Manager ser of the OS startup. ERIC file boot. It says press F10 for BIOS Setup options, ESC to get out. What should I do?

• Screen goes black and only the mouse pointer visible to the windows xp screen

  My computer has used to work without problems.  Now, when I start it upward, to the Windows XP start screen, the screen turns off and all that is visible is the mouse pointer.  I tried to start safe mode, and it does give me even the option - not even if I press F8 at startup upward.  What is the problem with my computer and what can do?

  Thanks for your answers, Dena and Jojih.

  The screen went black and all I could see was the mouse pointer.  There is no ameioration or changes on the hardware of all kinds.  I wonder if one of my employees has a virus on the computer.  I could not do in safe mode, even if I tried to press F8.  If I put in the Windows XP CD, the screen would go black after that he loaded the system files, just like at the start of Windows XP.  So I used Acronis PC Backup and Recovery and make a recovery disc and used to reformat the hard drive and then I reinstalled Windows XP.  Everything has been great to work for.

• Screen goes black randomly while the computer is in use

  Original title: black screen, bursts short
  I have a new computer with Windows 7, I also have a LG FLATRON F700b MONITOR, I get some black screens with nothing, they had a split second and a quick acceleration of music they occur 5, 6, 7, 8 times in one minute, it does not affect type me, like now, I do not lose keystrokes. It happens from the moment I start with the screen saver, the machine is a not to be logged on to Windows or Internet, eventually becomes less a problem when the screen and M/c for awhile, but never seems to completely disappear. What I want to know is there anything else he can be cured by buying a new monitor? any info would be greatly appreciated

  Hello

  1. you hear the music when the blackscreen appears?
  2. did you last changes made before the problem started?
  3. have you installed any third-party screen saver?

  Try the following steps:

  Step 1: disable screen saver and check if it makes a difference.

  Refer to this link for help:
  Enable or disable the screen saver

  Step 2: update the drivers for your graphics card.

  Follow these steps to update the drivers manually:
  a. open the Manager of devices by clicking the Start button, click Control Panel, click System and security, and then, under system, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. in the list of hardware categories, click on the graphics card and then double-click the device name.
  c. click on the driver tab, click Update driver and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide
  confirmation.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Screen goes black randomly and the mouse resumed normal functions

  My screen started to be empty at random. It seems to do a quick fade to black as if the power manager is turn off the screen. The PC stops not is and shake the mouse he brings.

  I checked my video driver, malware, power settings (currently any screen power off or power off is disabled). Went to powercfg and checked last wake-up factor, but it does not list everything. If it's just a removal of the power management screen, not sure it would be listed here because it is not a full power down.

  Is there a way to tell if it is the power Division of the screen Manager and if so, what is the cause of do?

  I begin to suspect my keyboard although it's just a hunch. It's an old v1.0 MS Comfort Curve Keyboard 2000. Keys become a little sticky, although there is no any button power on this issue (like the old buttons suspend) and from the keyboard Manager, he was very much tied to her. According to me, it came with a mouse since I replaced it with a mouse Spawn CMStorm. Perhaps there is an intervention of the strange?

  Original title: off dead zone screen

  It doesn't seem to be a thermal problem of graphics card. Seems not be related to what application is running, or at room temperature and it seems to come back with the movement of the mouse (and stay off without moving the mouse) this is why I suspect something to do with power management.

  Any suggestions?

  It looks like the mouse driver or firmware causing trouble...

• XP installation - the screen goes black after downloading the files and Restart__Error Code 80096001

  Hello

  After the re-construction of my computer with
  a new card mother MSI (AMD Athlon II X 2 with 2 GB RAM DDR3 1066) and a new 500 GB hard drive and using only the edge graphics I can not finish installing Windows XP.

  Error code 80096001 you can see

   

  HERE (http://sites.google.com/site/jugracamsi/)

  some screenshots I took during the installation procedure. I have an original OEM licensed Windows XP CD with SP2 which I can install it easily on my old system.

  What's wrong?

   

   

  A quick google on the message final error "Setup could not install the product catalog" this product like the first:

  http://support.Microsoft.com/kb/823303

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• At the beginning; After the Windows Logo at the start, the screen goes black and a POWER SAVE MODE comes up. I must stop button. I can run the computer as I am now in Mode safe mode with networking.

  When I turn on the computer of gateway, the machine starts and the initial window logo starts and runs for about five seconds.  Then the screen goes black instead of blue and stays black for about 10 seconds.  A 'Power SAVE MODE' appears.  The machine is dead to all orders.  I have to stop by pressing the off button.  I can turn back and the F10 key to get in Mode safe mode with networking.

  I tried to reinstall Windows XP original but it would erase my files.  I tried to restore the last good configuration also knowledge.  That did not work.

  The change came after a Windsows update.  I have McAfee security and I asked Windows but could not use due ot a conflict. -C' is all this bad start.  Clues?  I use Negear.  No change when I hooked directly either.

  Botton line, I can run in SafeMode with networking; but it is slow and I can't make alll I have to do.  What does not load Windows?

  http://wiki.answers.com/Q/How_to_get_out_of_power_save_mode_when_computer_screen_is_black

• While playing the hidden haunts and a few other games on facebook, my screen goes black.

  Original title: Screen goes black

  While the hidden haunts game my screen goes black & I have to disable the cumputer that has happened for a few weeks now what can I do to make this stop? This game & a few others that I play are also on facebook

  Gameplay and loading problems are often times caused by the settings of the browser or the problems.  Following these steps may help resolve the problem:
  (1) make sure that your browser is up to date or try another browser (Google Chrome, Internet Explorer and Firefox are the most compatible).
  (2) make sure your Flash is updated (http://get.adobe.com/flashplayer/).
  (3) clear the cache of your browser (http://kb.iu.edu/data/ahic.html).
  (4) clear your cache Flash (http://www.simplehelp.net/2010/09/16/how-to-delete-your-flash-cache/). If you use Chrome, this can be done by ensuring that the ' delete cookies and other site and plugin data "is selected when you clear the cache of your browser.
  (5) restart your browser.
  (6) make sure that you have access to the game using a Facebook link and not a bookmark.
  If you have any problems, follow these steps, or if these steps do not work for you, you can contact directly the developers of Facebook games by clicking on the link "report or contact this app" at the bottom of the game screen.
  I hope this helps!

• Detect when the screen goes black (standby mode)

  Is there a way to do this?  OnObscured does not seem to be called, that makes sense.  I couldn't find anything on the forums about this.

  Thank you.

  Thank you guys.  In fact, I realized that onVisibilityChange is what I'm looking for.  It is called when the screen goes black and when the screen is popped.

• Portege 7010CT shows Toshiba logo then the screen goes black

  Help! When I turn on the Toshiba logo comes up then the screen goes black and I find myself with a cursor blinking in the upper left corner. Nothing seems to work, keyboard seems locked even though CTRL, ALT & DEL it restarts. Was working perfectly one day, so that the next. Any ideas?

  Hello

  You can start the machine in safe mode? Which operating system you are using? Are you using it for a while or is this first boot after installation.

  Please write a little more. If you give more info and detailed description, it is easier to understand what may be the problem.

• My computer starts and I get the Windows startup screen, then my screen goes black and the computer is frozen I guess. Stopping and restarting do not work.

  I get to the black screen with the Windows XP logo and the bar of the State, and instead of my forthcoming accounts page, the screen goes black and nothing else happens. I tried the power off to reset and restart, and I can't perform a recovery of the system with the CD.

  Hi cgrosenick,

  -What software changes you did on the computer before the show?

  Follow these steps:

  Method 1:

  Start your computer in last known good configuration mode.

  For instructions, see How to start your computer by using the last good Configuration in Windows XP functionality

   

  Method 2:

   

  Follow the steps in this article:

  Computer stops responding with a black screen when you start Windows XP

• When I start my computer I saw a MSI logo and then the screen goes black and Windows does not load.

  original title: HELP ME PLEASE!

  (I am running windows xp) I need help! I tried installin linux ubuntu for netbook 10 on my msi u100, but everything was wrong when my little brother from my FlashDrive from the port, it has been installin linux from. so now when I turn on my computer it will not load windows, it will just have the msi logo and then the screen goes black and it does not load windows xp.

  Netbooks and also most computers these days, do not come with an installation CD. Instead, it has a recovery partition. Assuming that you have not deleted the recovery partition,

  Take a look at this:

  http://randompastime.blogspot.com/2010/02/restoring-MSI-wind-U100-NetBook-to.html

  Hope this helps

  Post back if necessary

  __________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Screen goes black after the connection to the laptop.

  The login screen appears and I can connect.  Then it takes a long time for the computer to think, but it never goes to my office.  The screen goes black.  I did Control + Alt + Delete to close and turn off the computer.  It's a laptop and I had trouble with the electrical cord were staying not 'on '.  I don't do social networks, or open unsolited E mails.  Is there a function key which will solve this problem?

  {t is a laptop and I had trouble with the electrical cord were staying not 'on'.}

  The above should explain more on your part.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Screen goes black while browsing on the Internet using Safari

  Original title: the screen goes black - windows 7 home premium

  my screen turns black during surfing. I use Safari and have several windows open at the same time. Photos on Facebook, I click find sometimes black. All windows to show a little blue circle spinning and I have to restart... I uninstalled Safari thought it was but it kept happening. I'm at my wits end. Have done all updates as they come in...

  Hello

  1 have had any changes made on the computer before the show?
  2 - is the problem occurs when you use Internet Explorer?

  I suggest you to use Internet Explorer and test for the problem on the computer. If the problem occurs in Internet Explorer, also try the procedure described in the link and check if that helps.

  Method 1:
  Try the procedure described in the link.

  Tips for solving problems when Internet Explorer hangs or stops working
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2:
  I suggest you to restart the computer in clean boot mode and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  If you are not facing problems with Internet Explorer and you should always check with Safari, I suggest that refer you to Apple support link:
  http://www.Apple.com/support/Safari/

  Hope this information is useful.

• iPhone 6 screen goes black randomly. Hard reboot solves the problem temporarily

  Hi all

  My iPhone 6 screen goes black randomly (usually during sleep) and when it happens, the fact response to touch or no sound. I know that the phone is on because I can always call another phone and it sounds on the line, but as I said the iPhone does not ring. Hard reboot (press home + power button for a while) will not solve the problem immediately after the restart, but after some time (hours or days), it goes black again and I have to do the same thing.

  No idea why this is happening? Is it a software or a hardware problem?  I'm really curious to know how to restart the phone resolves the problem.

  I am not able to take it to the bar of the kind of these days because of my busy schedule. I wonder what they need to replace when I take it to the store.

  Please, share your ideas.

  Thank you

  Sounds like a problem of software for me, especially because it forces is a troubleshooting step software, and you say that solved the problem (of least temporarily).

  However, I still think that the Genius Bar would be a good idea. They have access to diagnoses that are not accessible by the user, who can easily identify which applications or processes are causing the problem. I think that they can also do this by phone, but I rarely call support so I am not sure.