17 of the 20-day fail

Similar Questions

• updates that have failed the day 1, won't they update automatically the next day? and persevering until they are right? or what I need to do it manually? Dang! Tell me that it is not so...

  OK, so I'm at a dead end and had to buy a computer laptop refurb when my hard drive died while he's on leave.  Bought Monday, they had XP on it, but I checked the updates and it had 74 must be installed.

  I don't have access at home so I tried to install everything that was needed every day of the library since I bought this laptop on Monday.  On day 1, he said 74 needed to install updates, then I guess that the automatic far did a little more every day.  Finally the Service Pk 3 failed to install for the last 2 days.

  Now today I try again, but I'm looking back and see that some other updates in recent days have also failed.

  I don't want to go back and install each separately out of 110 undates installed.

  My question is: If one day some updates failed, the next day, wouldn't it automatically DL updates that failed the day before, get current?  If I were a computer, I would not keep DL and install new updates until the 'old' have been installed correctly.  So I just reasoning flawed or computers work this way?  Please tell me that I can't go back and redo all of those failed?

  Thanks a lot for your help in this matter!

  U

  .. .Meanwhile service pk 3 tells me he has finished loading and is ready to install, restart, etc... and I just canceled the installation because it seems that to me... If these other failures are not fixed first there will be the svc pk 3 effect, as well.  Of course they wish that no cat could have answered my question instantly... but no, he referred me to a technical person...

  Well, perfectionism causes procrastination... and sometimes it's just maddening... Please help me?

• link to the deprostaatkliniek site fails

  deprostaatkliniek.nl site has links that work, but also the links that fail.

  Hi Niek,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, you are having problems with the opening of links in a Web site.

  1. what browser you use to access Web sites?

  2. that you get an error code when the links do not work?

  3. were there any changes (hardware or software) to the computer before the show?

  4. is it the problem persists with a particular Web site?

  Perform the steps from the link if you use Internet Explorer and check to see if it helps.

  Nothing happens when you click a link in Internet Explorer

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Answer to us if you have problems with access to links, or any other problem of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Problems sending/receiving mail - error number: 0x800CCC0E - "the connection to the server has failed..." »

  De : Briangie

  I've been out of town for a few days. I was using a public Wi - Fi connection to my laptop. The first part of the week worked fine, but now using the same wireless connection, I receive the following error message. Has happened since yesterday afternoon 03/10/08 and today is 05/10/08. What is the problem? Help, please!

  The connection to the server has failed. Account: 'mail.charter.net', server: 'mail.charter.net', Protocol: POP3, Port: 995, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E

  From: Gary van

  In Windows Mail, go to the tolls, accounts, select the account mail.charter.net, properties, advanced. Change the port number for the incoming (POP3) server from 995 to 110. Make sure that the adjacent SSL option is not checked. Click OK.

  As a general rule, the owner of the SMTP server must be the same that provides your Internet connection at the moment.

  The workarounds available when sending abroad are the following:

  1. use webmail to send (via your browser).
  2. ask your ISP if they have one port other than '25' for SMTP. I do not think that
  Charter of fact. Cable companies are very difficult to accommodate travellers.
  3. If you frequently use the same connection away from home, replace the SMTP Protocol
  Server in this respect. It's a little tricky, but if you want to go this route.
  I can provide more details.
  4. If you frequently send to multiple locations, get a free Gmail account,
  Configure it to POP access and use for your shipment of household chores.
  Gmail uses port 465 for SMTP, which is not blocked as is port 25.

  
  Another response of the community of Windows Vista discussion groups

• The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start.

  the dependency of the orgroup faaied to start service unknown Internet connection.

  The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start. I tried all the suggestions on this page. Can't even find the virus that the internet not connected. My livebox is grateful for the laptop please help

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Is the question only for the icon network did you try to open a Web page and check?

  ·         What suggestions do you have tried?

  ·         What is the exact error message?

  ·         Have you tried all the steps from the link?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/connection-status-unknown-the-dependency-service/92203623-b6d5-4301-8c79-00210abbcdd4

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/943996

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2:

  If the previous step fails, follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/936211

  Method 3:

  If the previous step fails, reset WinSock and check if the problem persists:

  http://support.Microsoft.com/kb/811259

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 4:

  Temporarily disable the norton software (and any other security software) and the firewall on the computer as a test and check if this solves the problem follow the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program.

  Note: make sure that you enable the antivirus software, other security and firewall programs.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• The application has failed to start because its side-by-side configuration is incorrect. See the application event log or use the command-line sxstrace.exe for more details

  Hello

  I can t open Google Earth or Microsoft Office programs because I get this message - the application could not start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.

  A few days ago I could open all what programs. I put t know what is the problem.

  I did sxstrace and that's what I have-

  =================
  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = Wow32
  CultureFallBacks = en-US; en
  ManifestPath = C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe
  AssemblyDirectory = C:\Program Files (x 86) \Google\Google Earth\client\
  Application configuration file =
  -----------------
  INFO: File analysis shows C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe.
  INFO: Manifest definition identity is (null).
  INFO: Reference: Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053"
  INFO: Resolving reference Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT\8.0.50727.4053__1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.DLL.
  INFO: Found no manifesto for the neutral culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.5592_none_517247830f45081d.manifest
  INFO: Start the detection of assembly.
  INFO: End detection of assembly.
  ERROR: Activation context generation failed.
  End activation context generation.

  Help, please!

  This type of error can be caused if the Visual C++ library runtime components are missing or because of a third-party software.

  Follow the steps below:
   
  Method 1:
  If the problem is caused by the lack of Visual C++ libraries, you can download and install the Runtime components of Visual C++ libraries from the link below:
   
  This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

  Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.

  (a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.

  (c) after the reboot, open again "Turn Windows features on or off" and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.

  Step 2

  If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 and 2008 Redistributable Package and check to see if you can install the software.

  In programs and features, you do not show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Package redistributable Visual C++ 2008 SP1 (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  I hope this helps.

• Cannot send e-mail error delivery to the following recipient failed permanently

  I tried to send a mail-donkey for a few days now, but I receive the following message:

  Delivery to the following recipient failed permanently:

  microsofthelpdesk@Microsoft.

  Technical details of permanent failure:
  Google has tried to convey your message, but it was rejected by the server for the domain microsoft.com recipient by microsoft - com.mail.protection.. [207.46.163.138].

  The error that the other server returned was:
  550 5.4.1 [microsofthelpdesk@microsoft.]: recipient address rejected: access denied

  What really bothers me is that I've searched for a solution but I think is to wave to me.

  It would be useful that I had a detailed explanation about the error 550 5.4.1 and how to solve this problem.

  It is not a valid email address or it will not be detected.  Care to tell us what is your original problem.

• The logon process failed to show safety and connection options when ctrl alt delete is pressed.

  Original title: nothing just won't even ctrl alt del

  When I start my laptop, windows 7, I think that 64 - bit and it starts normally but after a second, I can't click anything on my taskbar and I can click on the Start button but nothing in it. I can't right click on the toolbar to start the Task Manager or press ctrl shift esc. When I press ctrl alt del, it will take a few seconds to load then the screen will go black and say that the logon process failed disppay of safety and connection options when ctrl alt delete is pressed. When I click on one of the icons on my desktop, there was the circle of rotation as if his tent but then going to give up. The problem started a few days ago and I did a system restore to 2 days before it happened and it changed nothing. I have avast and found no virus and I had a legitimate registry cleaner/Fixer and ran both in safe mode and found about 360 registry errors and starts normally again and the same problem persists. If you need more information to help me I will give it to you.

  Hi Sheriff.

  Thanks for posting your question in the Microsoft Community.

  As you have tired almost all the possible troubleshooting steps and the issue can be generated if there is a corrupted user account.

  . Did you recent hardware or software changes to your computer before the show?

  I suggest you to check the question in the new user account.

  Follow the steps in the link.

  Create a user account:

  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

  If everything works well in the new user account, then I suggest you to transfer data and settings to the fixed aid corrupt the link profile.

  Fix a corrupted user profile:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I also suggest you to check the error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. click Start.
  b b.. in the search box, type eventvwr.msc and press enter.
  c. click the Application in the observer of events (local).
  d. Locate the event log on the right side of the event viewer window.

  Reference:

   

  Open Event Viewer:

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)? :

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

   

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• I try to download the 30 day trial of PS and and he says his 'download now', but it's not. There is nothing that's going on, nor is it a file in my downloads.  It's been over an hour now and I tried 3 times.  If anyone can help?

  I try to download the 30 day trial of PS and and he says his 'download now', but it's not. There is nothing that's going on, nor is it a file in my downloads.  It's been over an hour now and I tried 3 times.  If anyone can help?

  If you follow the 7 steps you can directly download a free trial here: Adobe CC 2015 Direct Download Links: Creative Cloud 2015 Release | ProDesignTools

  If you have a problem from the download, you follow the 7 steps, or your browser does not accept cookies.

  the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  failure to obtain this cookie translates into an error page displayed after clicking on a link on prodesigntools.com or initiates the download of an incorrect (e.g., current) version.

• Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Have already tried to contact Adobe and they told me to reinstall the program. I did this and the same issue. It's crazy. I can not turn off something that I did not more...

  Thank you.

  No - I had, of course, tried all these things. Finally, I had someone (after several days) on the personal chat group that could fix and it did it in a few minutes. Too bad that nobody else seemed to be able to do. Adobe is very soft.

  I can't thank enough the other person - it was amazing.

• I have one membership year for cloud creative after that I got with my update, but recently the other day, it changed all my applications of trial versions. How to return to my membership and demo of the apps?

  I have one membership year for cloud creative after that I got with my update, but recently the other day, it changed all my applications of trial versions. How to return to my membership and demo of the apps?

  Check that your current account (and only the adobe, used in the next step id is good) by logging in here and check the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  If this fails to solve the problem, Cloud Creative applications back in test mode after an update until 2015 for CC

• VSS error: the VSS "SqlServerWriter" failed.

  Every two days (sometimes weeks), I send a specific server to restart the computer to resolve its problems, VSS.  Any help on this would be much appreciated!

  Here is the StackTrace:

  VSS error
  There was a problem with the VSS subsystem on 'server '. :

  VSS error: the VSS "SqlServerWriter" failed during the phase of 'DoSnapshotSet' with the error WriterErrorNonRetryable. The State of the VSS writer is FailedAtPrepareSnapshot
  StackTrace:
  System.AggregateException: One or more errors occurred. ---> System.AggregateException: one or more errors occurred. ---> Replay.Core.Contracts.Transfer.VssGeneralErrorException: there was a problem with the VSS subsystem on 'server '. ---> Replay.Agent.Contracts.ShadowCopy.ShadowCopyWriterFailedException: the VSS "SqlServerWriter" failed during the phase of 'DoSnapshotSet' with the error WriterErrorNonRetryable.  The State of the writer VSS is FailedAtPrepareSnapshot---> Replay.Common.Contracts.ReplayException
  -End of the exception stack trace internal-
  at Replay.Agent.Implementation.ShadowCopy.ShadowCopyInstance.GatherAndReportWriterStatus (String phase, Boolean throwOnError)
  at Replay.Agent.Implementation.ShadowCopy.ShadowCopyInstance.PreBackup)
  at Replay.Agent.Implementation.ShadowCopy.ShadowCopyInstance.TakeSnapshot)
  at Replay.Agent.Implementation.ShadowCopy.ShadowCopyInstance.TakeSnapshot (ShadowCopyType shadowCopyType, VolumeName [] volumesToSnap providerId Guid, Guid [] excludedWriterIds, vss, win32 IWin32 IVssImplementation, ITevoLibWrapper tevoLibWrapper, vssSecondsRetryDelay UInt32, UInt32 vssRetryCount)
  Replay.Agent.Implementation.ShadowCopy.ShadowCopyService.TakeSnapshot (type ShadowCopyType, VolumeName [] volumesToSnap, Guid, Guid [] excludedWriterIds, vssSecondsRetryDelay UInt32, UInt32 vssRetryCount providerId)
  at Replay.Agent.Implementation.Transfer.TransferSession.StartTransferSession (String agentHostName, IPAddress coreIPAddress, application of TakeSnapshotRequest, CancellationToken, cancellationToken, IShadowCopyService shadowCopyService, IDriversService driversService, IStorageService storageService, ITransferDataServerFactory transferDataServerFactory, ITevoLibWrapper driverApi, AgentTransferSettings transferSettings)
  -End of the exception stack trace internal-
  at Replay.Core.Implementation.Transfer.TransferJob.TakeSnapshotInternal (TransferGroupItem transferGroupItem)
  to Replay.Core.Implementation.Transfer.TransferJob. <> c__DisplayClass5f.b__5d (TransferGroupItem point)
  -End of the exception stack trace internal-
  to Replay.Core.Implementation.Transfer.TransferJob.ExecuteParallel (Action 1 action)
  at Replay.Core.Implementation.Transfer.TransferJob.TakeSnapshot)
  at Replay.Core.Implementation.Transfer.TransferJob.TransferTaskInternal)
  at Replay.Core.Implementation.Transfer.TransferJob.TransferTask)
  at System.Threading.Tasks.Task.Execute)
  -End of the exception stack trace internal-
  ---> (Inner Exception #0) System.AggregateException: one or more errors occurred. ---> Replay.Core.Contracts.Transfer.VssGeneralErrorException: there was a problem with the VSS subsystem on 'server '. ---> Replay.Agent.Contracts.ShadowCopy.ShadowCopyWriterFailedException: the VSS "SqlServerWriter" failed during the phase of 'DoSnapshotSet' with the error WriterErrorNonRetryable.  The State of the writer VSS is FailedAtPrepareSnapshot---> Replay.Common.Contracts.ReplayException
  -End of the exception stack trace internal-
  at Replay.Agent.Implementation.ShadowCopy.ShadowCopyInstance.GatherAndReportWriterStatus (String phase, Boolean throwOnError)
  at Replay.Agent.Implementation.ShadowCopy.ShadowCopyInstance.PreBackup)
  at Replay.Agent.Implementation.ShadowCopy.ShadowCopyInstance.TakeSnapshot)
  at Replay.Agent.Implementation.ShadowCopy.ShadowCopyInstance.TakeSnapshot (ShadowCopyType shadowCopyType, VolumeName [] volumesToSnap providerId Guid, Guid [] excludedWriterIds, vss, win32 IWin32 IVssImplementation, ITevoLibWrapper tevoLibWrapper, vssSecondsRetryDelay UInt32, UInt32 vssRetryCount)
  Replay.Agent.Implementation.ShadowCopy.ShadowCopyService.TakeSnapshot (type ShadowCopyType, VolumeName [] volumesToSnap, Guid, Guid [] excludedWriterIds, vssSecondsRetryDelay UInt32, UInt32 vssRetryCount providerId)
  at Replay.Agent.Implementation.Transfer.TransferSession.StartTransferSession (String agentHostName, IPAddress coreIPAddress, application of TakeSnapshotRequest, CancellationToken, cancellationToken, IShadowCopyService shadowCopyService, IDriversService driversService, IStorageService storageService, ITransferDataServerFactory transferDataServerFactory, ITevoLibWrapper driverApi, AgentTransferSettings transferSettings)
  -End of the exception stack trace internal-
  at Replay.Core.Implementation.Transfer.TransferJob.TakeSnapshotInternal (TransferGroupItem transferGroupItem)
  to Replay.Core.Implementation.Transfer.TransferJob. <> c__DisplayClass5f.b__5d (TransferGroupItem point)
  -End of the exception stack trace internal-
  to Replay.Core.Implementation.Transfer.TransferJob.ExecuteParallel (Action 1 action)
  at Replay.Core.Implementation.Transfer.TransferJob.TakeSnapshot)
  at Replay.Core.Implementation.Transfer.TransferJob.TransferTaskInternal)
  at Replay.Core.Implementation.Transfer.TransferJob.TransferTask)
  at System.Threading.Tasks.Task.Execute)
  ---> (Inner Exception #0) Replay.Core.Contracts.Transfer.VssGeneralErrorException: there was a problem with the VSS subsystem on 'server '. ---> Replay.Agent.Contracts.ShadowCopy.ShadowCopyWriterFailedException: the VSS "SqlServerWriter" failed during the phase of 'DoSnapshotSet' with the error WriterErrorNonRetryable.  The State of the writer VSS is FailedAtPrepareSnapshot---> Replay.Common.Contracts.ReplayException
  -End of the exception stack trace internal-
  at Replay.Agent.Implementation.ShadowCopy.ShadowCopyInstance.GatherAndReportWriterStatus (String phase, Boolean throwOnError)
  at Replay.Agent.Implementation.ShadowCopy.ShadowCopyInstance.PreBackup)
  at Replay.Agent.Implementation.ShadowCopy.ShadowCopyInstance.TakeSnapshot)
  at Replay.Agent.Implementation.ShadowCopy.ShadowCopyInstance.TakeSnapshot (ShadowCopyType shadowCopyType, VolumeName [] volumesToSnap providerId Guid, Guid [] excludedWriterIds, vss, win32 IWin32 IVssImplementation, ITevoLibWrapper tevoLibWrapper, vssSecondsRetryDelay UInt32, UInt32 vssRetryCount)
  Replay.Agent.Implementation.ShadowCopy.ShadowCopyService.TakeSnapshot (type ShadowCopyType, VolumeName [] volumesToSnap, Guid, Guid [] excludedWriterIds, vssSecondsRetryDelay UInt32, UInt32 vssRetryCount providerId)
  at Replay.Agent.Implementation.Transfer.TransferSession.StartTransferSession (String agentHostName, IPAddress coreIPAddress, application of TakeSnapshotRequest, CancellationToken, cancellationToken, IShadowCopyService shadowCopyService, IDriversService driversService, IStorageService storageService, ITransferDataServerFactory transferDataServerFactory, ITevoLibWrapper driverApi, AgentTransferSettings transferSettings)
  -End of the exception stack trace internal-
  at Replay.Core.Implementation.Transfer.TransferJob.TakeSnapshotInternal (TransferGroupItem transferGroupItem)
  to Replay.Core.Implementation.Transfer.TransferJob. <> c__DisplayClass5f.b__5d (TransferGroupItem point)<>
  <>

  Hi UC_Scott,

  If your SQL Writer failure problem has not been resolved since the announcement, please consider looking at this article: support.software.dell.com/.../133167

  Let me know how everything goes.

• ORA-01847: day of the month must be between 1 and the last day of the month

  Hi all
  
  
  
  
  
  
  Select
  To_date(mDate||) e '|| mtime, "YYYY-MM-DD HH24MISS") meddate
  of PR_MOCTEST_TEMP
  
  mDate IS OF TYPE of DATA VARCHAR2 AND mtime OF VARCHAR2
  
  mDate: 07-09-2009
  mtime: 131241
  
  mDate IS IN FORMAT DD-MONTH-YYYY
  mtime: HHMMS
  
  mtimeOF IS OF TYPE of DATA VARCHAR2 AND VARCHAR2 mDate
  
  mDate: 07-09-2009
  mTIME: 131241
  
  mDATE IS IN FORMAT DD-MONTH-YYYY
  mTIME: HHMMS
  
  I NEED TO COMBINE THE 2 COLUMNS TO GET THE OUTPUT AS DD-MM-YYYY HH24MISS
  AND I AM GETTING THE ERROR;
  
  
  ORA-01847: day of the month must be between 1 and the last day of the month
  
  where mistaken?
  
  Please notify
  
  
  Kai

  You will find the bad dates using a table of logging of errors:

  --we'll try to insert into here, invalid dates will be thrown out
  create table dst(d date);
  
  -- create an error log table dst_err
  exec dbms_errlog.create_error_log('dst', 'dst_err');
  
  -- try the insert. Will fail with your ORA-01847
  insert into dst select TO_DATE(mdate||' '||mtime,'DD-MM-YYYY HH24MISS') from PR_MOCTEST_TEMP log errors into dst_err('comment'); 
  
  -- view the errors
  select * from dst_err;
  

• The message send failed - Please verify your account settings are correct.

  I got Thunderbird established and working for years with multiple accounts. All of a sudden today, I can't send all messages in ANY of my accounts with several Web hosts. The message I get from all of them is:

  The message send failed.
  Check that your Mail & Newsgroups account settings are correct and try again.

  I checked my settings. The look that is configured in the same way they always do. I can send email with these parameters from my phone (K9 Mail on Android program.)

  All my accounts that can receive messages in Thunderbird. I get new messages and I can read them.

  If I try to save a message as a project over IMAP, I get the error:

  Unable to save your message as a draft.
  Check that your Mail & Newsgroups account settings are correct and try again.

  What could possibly change to make Thunderbird exhibit this behavior? I tried without thunderbird downgrade to the previous version and it still had the same behavior. I tried to start in safe mode without the extensions, and he had always the same behavior. Here are my troubleshooting information:

   Application Basics
  

     Name: Thunderbird
     Version: 31.7.0
     User Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0
     Profile Directory: Open Directory
  

               (Local drive)
     Application Build ID: 20150511105107
     Enabled Plugins: about:plugins
     Build Configuration: about:buildconfig
     Memory Use: about:memory
  

   Mail and News Accounts
     account1:
       INCOMING: account1, , (imap) sub4.mail.dreamhost.com:993, SSL, passwordCleartext
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, true
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
       OUTGOING: sub4.mail.dreamhost.com:465, SSL, passwordCleartext, false
  

     account2:
       INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
  

     account3:
       INCOMING: account3, , (imap) secure.emailsrvr.com:993, SSL, passwordCleartext
       OUTGOING: secure.emailsrvr.com:465, SSL, passwordCleartext, true
  

     account4:
       INCOMING: account4, , (imap) secure.emailsrvr.com:993, SSL, passwordCleartext
       OUTGOING: secure.emailsrvr.com:465, SSL, passwordCleartext, true
  

     account5:
       INCOMING: account5, , (imap) imap.googlemail.com:993, SSL, passwordCleartext
       OUTGOING: smtp.googlemail.com:465, SSL, passwordCleartext, true
  

     account6:
       INCOMING: account6, , (imap) imap.googlemail.com:993, SSL, passwordCleartext
       OUTGOING: smtp.googlemail.com:465, SSL, passwordCleartext, true
  

   Crash Reports
  

   Extensions
     Flat Folder Tree, 1.1.2, true, [email protected]
     Google Contacts, 0.7.12, true, {BDD92442-0534-4D6F-A966-BAB7D561D781}
     NoComposeAccount, 1.3.1, true, [email protected]
     Xpunge, 0.6, true, {786abda0-fd14-d247-bf69-38b2fc18491b}
     Enigmail, 1.7.2, false, {847b3a00-7ab1-11d4-8f02-006008948af5}
     Messaging Menu and Unity Launcher integration, 1.3.1, false, [email protected]
  

   Important Modified Preferences
  

     Name: Value
  

       accessibility.typeaheadfind.flashBar: 0
       browser.cache.disk.capacity: 358400
       browser.cache.disk.smart_size_cached_value: 358400
       browser.cache.disk.smart_size.first_run: false
       browser.cache.disk.smart_size.use_old_max: false
       extensions.lastAppVersion: 31.7.0
       mail.openMessageBehavior.version: 1
       mailnews.database.global.datastore.id: cbdcac30-9bd0-4a88-9a66-31a0abff554
       network.cookie.prefsMigrated: true
       places.database.lastMaintenance: 1435582206
       places.history.expiration.transient_current_max_pages: 104858
       plugin.importedState: true
  

   Graphics
  

       Adapter Description: X.Org -- Gallium 0.4 on AMD RV620
       Vendor ID: X.Org
       Device ID: Gallium 0.4 on AMD RV620
       Driver Version: 3.0 Mesa 10.5.2
       WebGL Renderer: false
       GPU Accelerated Windows: 0
  

       AzureCanvasBackend: cairo
       AzureSkiaAccelerated: 0
       AzureFallbackCanvasBackend: none
       AzureContentBackend: cairo
  

   JavaScript
  

   Incremental GC: 1
  

   Accessibility
  

     Activated: 0
     Prevent Accessibility: 0
  

   Library Versions
  

       Expected minimum version
       Version in use
  

       NSPR
       4.10.6
       4.10.6
  

       NSS
       3.16.2.3 Basic ECC
       3.16.2.3 Basic ECC
  

       NSS Util
       3.16.2.3
       3.16.2.3
  

       NSS SSL
       3.16.2.3 Basic ECC
       3.16.2.3 Basic ECC
  

       NSS S/MIME
       3.16.2.3 Basic ECC
       3.16.2.3 Basic ECC
  

  The problem was that my directory/tmp was not mounted. I don't know why it has not been mounted, but restarting the Assembly fixed.

  Thunderbird was IO error trying to create temporary files. The error messages were misleading, making me think it had to do with e-mail accounts.

• Can I rent a movie on a laptop the night before and watch it the next day on a plane

  Can I rent a movie on a laptop the night before and watch it the next day on a plane

  About rent movies on the iTunes Store - http://support.apple.com/HT201611