190 HP colour copier: align ink cartridges

Similar Questions

• HP psc photosmart 2410: align ink cartridges

  I replaced the cartridge three-color No. 57 and the display showed ' align the print cartridges - Press OK to print the Page align.

  I pressed 'OK' and a page was fueled and the printer made looks like fine print, 'impression' was displayed and then he stopped and the same "Align" message was displayed.  I went to this cycle several times and was never able to print an alignment page.  I can't get rid of the message and therefore I can't use other functions; scan, fax or copy.  I can always print pages of the computer, however.  Does anyone know how to reset or escape from this situation?  Help, please.  Thank you.

  Hi @LCWaite

  I understand that you are having problems with your HP PSC 2410 Photosmart all-in-one printer for the replacement of the tri color cartridge. Please use the following document to solve the problem and I would like to know the results of your efforts; Error message: align the print cartridges, press OK to print Align Page.

  I hope this helps.

• Replace the ink cartridges and not shown on the new copy of the outs ink

  I have a HP 8500 printer a9110. I just replaced all ink cartridges 3 colours (black cartridge is always good). After replacing, I tried to print and all that comes out are white print out without color or very light tone. I tried to go to tools clean and align the heads. Cleaning worked but received failure on align option. I turned off and unplugged the unit kidnapped and released new ink cartridges. Also, I removed the two heads and cleaned with a soft cloth. Everyone knows this problem before. Any help is appreciated.

  I don't think that should have used a lot of ink.

  Although it shows that 60%, I think you should be able to print as well.

  Sorry I don't really have much information on it, but I'm glad you were able to solve your problem!

• Printer copier scanner says check paper/ink cartridge

  Printer HP PSC 1410 all-in-one will not print a lot of the time, and I wonder why. It usually prints a small black dot in the upper left corner of the document and then says check paper/ink cartridge. I have paper in there, and I was just buying ink. It will even scan and copy something and print it, but when I want to print a document from the computer, it does not work. any help?

  Hello

  1. do you get an error message when you try to print?
  2. what operating system is installed on your computer?

  I suggest that you follow the steps in this article and check to see if they help.

  Why can I not print?

• I put 3 color ink cartridges and now no impression. Alignment has not, but if I put in the old car

  Series Photosmart C6380 (F642ED) after that 3 new color ink cartridges, I installed my printer does not print. The alignment test failed.  If I put the old cartridge back in the lineup if ok.  How

  can I fix?

  Ingnore that reset listed and use this one:

  1. with the printer plugged directly into a wall outlet and turned on, unplug the power cord from the back of the printer.
  2 then unplug the power cord from the wall outlet.
  3. wait at least 30-60 seconds
  4. plug the power cord into the wall outlet first. If a module with the power cord, make sure that the light of the module and then reconnect power cord on the back of the printer
  5. the printer should power back on by itself, but if not use the power button on front panel to turn on machine.

• The life of ink cartridge and print head alignment failed

  I use an Officejet Pro 8500 A910 and did not have any problems with it until I recently changed the ink two weeks ago.

  I bought HP original on Amazon UK and after four attempts to align the print head (which fails permanently), my ink for all, but the black cartridge high capacity is exhausted.

  I havn't print all pages in full color, black only for the ebay postage labels.

  Hell this printer that consume all my ink in five attempts to alignment?

  HP will reimburse me for the color ink cartridges?

  I solved the problem.

  BUY A CANON INKJET...

  It cost me less than a new set of cartridges for the HP OfficeJet

• Mac 0SX installed the ink cartridge; aligned; printer does not print HP Deskjet 3520

  I just installed a new ink cartridge, lined up and tried to print my point.  The paper feeds through but nothing prints.  Is

  There is something else I need to do, or something that I did I shouldn't?  Have already installed cartridges spare and never had this problem.  Thank you.

  Hi NancyWB,

  I can't wait to hear that you have questions.  This could be a problem with the hardware cartridge or unit; However it can also be related to connectivity.  You are able to print a test page for the unit itself? Please see the procedure to print a test page for the device to determine if the material is shown below.  If the test page is empty or contains flaws, click here for the action on this issue.

  To print the page of unit test:

  1. On the product control panel, press the (arrow) down to select settings and pressOK .
  2. Press the (arrow) downward to select Tools and press OK .
  3. Press the (arrow) downward to select Print Quality Report and press OK . The report prints.

  I hope this helps!

• align the ink cartridges

  Does anyone have an idea on how to align the cartridges to print on HP psc 1350 with Windows 7, which does not use the HP Toolbox?  Thank you very much for any suggestions on this.

  When a new cartridge is installed the PSC 1350 will automatically print an alignment page.  This page must be loaded on the scanner glass and the "scan" button pressed to complete alignment.  It does not require the computer see this page for more information.

• How to align the c4100 series ink cartridge

  I have problems hologram out, so far I did 8 pages of alignment, and they look the same all OK for me, now I'm trying to align the cartridges.  My laptop uses windows 8.1.  How to align the cartridges.

  Thanks in advance.

  Hi @lyjonne

  You can install the full software features and use the Printer Wizard to align the cartridges, or you can use the printing and scanning doctor.

  Use this link to download and run the HP printer install wizard for Windows

  The HP printer for window installation wizard was created to help Windows 7, Windows 8, and users Windows 8.1 download and install the latest and most appropriate HP software solution for their HP printer.

  Or click here to download and run the printing and scanning doctor > www.hp.com/go/tools

  

  

  As you can see the Print and Scan Doctor allows you to print a page, to perform the alignment, to clean the print heads, get print diagnostic information and more.

  I hope this helps.

  -In support of Movember

• In the printer ink cartridge does not print in black on paper data

  The product name and number: e-all-in-one printer, HP Photosmart 5514 - B111h

  Operating system: Windows 7 64-bit

  Error message: no

  Changes made to your system until the problem occurred: no

  I went to copy the data on my printer and noticed the empty ink was passed out.  Changed the black print cartridge
  and now I can't print anything that has a black colour.  Replaced by a new black ink cartridge and

  Unable to copy or print everything about the color white.  Do you have all the guests on troubleshooting

  with no luck.

  Y at - it something else that can be done?  Would appreciate the help.

  Thank you

  Hello Alex,.

  You can try the following troubleshooting link:

  http://support.HP.com/us-en/document/c02914910

  In particular, solution 6 can be useful in your situation - print diagnostic print quality / check that the supplies are properly ventilated / print head cleaning.

  Hope this helps.

• OfficeJet Pro 6830: Installed new ink cartridges on 6830, but they were not full

  I've been using this printer for about two years now, been through "Print head problem" for both, they exchanged once and replace only the part once.

  My ink colour C, M and there were emptied at the same time, so I ordered all three in an online store. I installed a few minutes ago and check the ink level via the touch screen of the printer. It turns out that they are not quite complete. They are almost full, C and are close to full, but M is less complete.

  I wonder why this happens? I never checked the ink level in the past, but it surprises me. The printer makes some kind of calibration and printhead cleaning to get ready installed ink? (So consumed little ink)

  I scanned the QR code on the side of boxes of ink and checked the hologram stickers and pretty sure that they are genuine. The printer also said that they are authentic.

  Here is the picture of my ink level. Shot after installation of the cartridge and nothing printed.

  

  Another strange thing is the date of installation. Now it is April 4 in my country but the web printer configuration page shows cartridge installation date is April 1! I checked the date and the printer and everything is OK.

  If the cartridges have been used before, the printer screen would show a message that cartridges have been used on another front printer. I saw only me because I kept the old ink before trading in the past as I said up there.

  Please see a screenshot below

  

  Everyone knows what happened? Or it's normal? (The packaging and seal in plastic cartridges seemed fine, nothing suspected weird)

  Thank you.

  Welcome to the HP Forums

  @BlackMiracle,

  I came across your post about the concerns that you have with the help of your new ink cartridges and I wanted to share my own suggestions. The date being out for a few days is a bit strange, but the rest seems normal. Yes, when you install the cartridges, they are calibrated and alignment and clean, that uses a bit of ink. The levels that you see are also "estimated" levels If there are print quality problems or error messages, let me know and I'll do my best to help.
  
  I hope this helps!

  Click the thumbs up below to say 'Thank you' & the "Accept as Solution" If the problem has been resolved it please and thank you!
  
  All the best,
  
  Contact HP:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Could not print black after installing new ink cartridge

  I installed the new black cartridge on my deskjet 3520. This is the original hp ink cartridge.

  also reinstalled the software of hp deskject.

  It shows even good condition here.

  but just no matter if I try to copy/printing, the printer started working and looks like it's actually printing, but after he gives me a blank page.

  

  Please can you me what should I do?

  

  Hi @Laviniania,

  Welcome to the Forums of HP Support! I see that you are facing some print quality problems on your HP Deskjet 3520, you cannot print in black ink, you tried an alignment without success.

  I would like to continue you here: printer does not print black ink or color of ink or prints blank Pages, I understand, you may have made some of these steps already but I need you to complete all the steps in order to solve the problem of the missing black, you encounter.

  Please note: there are three stages of print head cleaning. Three steps if necessary. If the print head is badly clogged, it may require another round of cleaning. If so, wait 30 minutes after the last step of cleaning (third) to start the first stage of the cleanup process.

  If you are unable to print in black ink, I think that the issue may be the printer and not the cartridge. I highly recommend call you our technical support at the 800-474-6836, I'm sure they will be able to help you regardless of the status of the guarantee. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www.HP.com/cgi-bin/hpsupport/index.pl

  Thank you

• Printer does not print in color after installing new ink cartridge

  I have a HP Photosmart C7280 all-in-one printer.   Windows 7 is my OS.  I have made no other changes to my computer before this problem.

  My problem:

  I installed a genuine HP brand new yellow ink cartridge in my computer because my other cartridge was empty.  After that I installed a new cartridge, my printer normally goes through an initialization process.  This time he did that.  Now when I try to print anything in color, I get a window that says "ink empty Casrtridges.   To print in color, install the following cartridges: yellow "then turns and she says in that it can only print in black."

  I did a Test print.  I ran "clean cartridges".  I did a 'print align.   All these prints in color, including the yellow.  I also did a color copy and printed the color yellow.   Ink level shows the yellow as a FULL cartridge.

  I have tried with 3 new genuine HP yellow ink cartridges and it still doesn't let me do a color print.  I have rebooted my system, unplugged the printer several times and it still will not print color.

  What else could be my problem?  What else can I try?

  Thanks for any help anyone can give me.

  Carol

  It seems that the error got stuck in the printer driver. Try to uninstall and reinstall the printer software. That should clear up the problem. I'll link the latest software and drivers below. Let me know what happens.

  Uninstalling the printer software

  Installation of the software of the printer in Windows 7 for a USB cable connection

  Installation of the software of the printer on a wireless network or network (Ethernet) cable

  HP Photosmart full feature software and drivers

• HP Photosmart Plus B209A does not print black ink despite trying two separate NEW ink cartridges black

  HP Photosmart B209A more

  MAC

  No error messages but trying to align or check colors - black doesn't print at all

  No change - knew ink was low so I tried to install a new black ink cartridge - then one day later tried an another new black ink cartridge

  I tried all the techniques of "Troubleshooting" listed on the page Web - align, clean the print heads, install the new cartridges, looking for trouble with the vents, etc.  I have only used HP ink cartridges.

  Hi abruce,.

  Usually, it is a result of dried/clogged ink nozzles in the printer or the print head.

  According to some other users on the forums, you can remove the print head (use this guide if you are unsure how: http://support.hp.com/us-en/document/c01944580)

  Make sure the cartridges are removed from the print head

  Dive head in hot water, nozzles downwards. (about 1 in. of water) and leave any residue of ink to flow. This process should take about 15 minutes. Ensure that the print head is completely dried out and there is no moisture in the electrical contacts or the rest of the part.

  I hope this helps!

• Photosmart 7510 - black ink cartridge does not print

  Recently, I replaced the ink cartridges on my Photosmart 7510 C311A. These are all the "genuine HP cartridges ', full.

  Black ink (with the symbol of the Pentagon) does not print, not at all. I ran through the standard troubleshooting steps:

  Cleaning of printheads

  Cleaning of copper contacts

  * Check for a good evacuation

  My colleague in the corridor as the printer even so I borrowed his black ink cartridge and tried: same problem. The printer does not record that there is a problem, but when I run printing tests, where there should be a black ink, there is absolutely none. All other colors print correctly.

  The printer doesn't lack NOT of the printer "align" test however does not offer a suggestion of what to do from there. I've not seen - in test reports - an indiciation of the misalignment.
  
  Suggestions on what to do now?

  I had the same problem. I had replaced the empty cartridge black and suddenly, no ink. Finally, what has worked is
  (1) I removed all the cartridges and cleaned the copper connectors with wet Publix.
  (2) I got a wet paper towel and he pressed repeatedly on the silver circular vent that would be under the black cartridge. I did until no black came. Let it dry.
  (3) I replaced all the cartridges and on the printer. I went to tools/clean the cartridge. I did it a couple of times and he finally printed black ink! I confirmed by going to tools/align, and align the cartridges successfully. He had kept before crashes when the black ink did not work.