I put 3 color ink cartridges and now no impression. Alignment has not, but if I put in the old car

Similar Questions

• replace the ink cartridges and now I get no output black (although the colors seem to work). Help?

  With the help of a printer C410e/HP Photosmart Premium e-ALL-IN-ONE, I went through the original ink cartridges without any problem.  I have received warnings that the ink was low and bought the HP 564XL cartridges and installed according to the instructions.  Now, the output seems only to print the color inks, but not black.  After trying help indicating to try pulling the plug for 30 seconds and then plug, I got about 2 pages of output stained and white pages and then again.  Any suggestions on how to fix this?

  I solved this by buying another cartridge of black ink.   Guess I got ripped off on my previous purchase.  The two were the same shop HP ink cartridges.

• Photosmart D110a: installed the new HP black ink cartridge and now the black ink does not print

  Just installed a new print 60xl cartridge to replace the one that was being ink. Now the black ink basically does not print. I cleaned the cartridges 4 times and run all Diagnostics pages. The black prints just a small piece of the upper part of the letters on the pages of diagnostics and in grayscale on the test pages.

  Hello!
  Welcome to the HP Forums, I hope that you are @janmacwill,

  I saw your post on the black ink does not print your Photosmart D110a and I wanted to stop making you share my suggestions. See the link below to solve the problem and if the black still does not print, contact HP (below) to see about a replacement unit.

  Printer prints a blank Page or doesn't print black or color ink for the printer series HP Photosmart e-All-in-One (D110a and D110b)

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up".

  to say thank you for my help.

  Have a wonderful day

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once will open the support page please select the country in which you are

  located. Then enter your model of HP on the right number.

  (2) then choose the 'Contact Support' tab at the top and scroll down to the

  bottom of the page "HP Support - Contact" to fill in the form provided

  your contact information.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select ' Get phone

  number. "A file number and telephone number will now fill for you.

• I reset my computer and now ask an identifier has not

  I factory reset my dell with dell datasafe restore and now his demand for a connection it dose does not reset it completely, and I can't go to safemode becuse its not reset it self

  Dell Datasafe is the Dell software, not Microsoft Software.

  Ask in the Forums of Dell Support.

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• Windows is genuine, but a little bad thing that happened and now he asks to be enabled, but usually, I just get the real mistake, no. now.

  I have windows vista family premium on my laptop, I was upgrading Internet Explorer and somehow windows 7 or 8 has made an iether facility forced with the browser or not in Explorer, I totally does not want to buy the upgrade and he chose not, as I have no money to pay for it and now my vista must everywhere be reactivated and used. This feels like marketingespecially if the response is going to be vista is no longer supported now what?

  I have windows vista family premium on my laptop, I was upgrading Internet Explorer and in some way, windows 7 or 8 is a forced installation

  Impossible, upgrading your web browser might never upgrade your operating system.

  iether with the browser or the browser instead I totally did not want to buy the upgrade and it has not chosen, as I have no money to pay for it and now my vista everywhere needs to be reactivated and used. This feels like marketingespecially if the response is going to be vista is no longer supported now what?

  Reinstall Windows Vista by using the following instructions:

  http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/repair-man-removed-windows-vista-and-installed/f4ec610a-856b-47a6-9ac2-7d5f07763eb0?msgId=343a6389-3a13-46d1-93fa-342f6a9b8ae1

  Revive by telephone using the following instructions:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I use Windows XP Dell computer - I downloaded some drivers and now my monitor won't work, but thesystem is running in the background. How can I get my monitor appears again?

  Hello

  I recently downloaded some drivers using the software "Drivermax" and in doing so, I restarted my computer Dell Windows XP, whom he treated and Startup logo XP deleted monitor on me but the system is still running. There no display no matter what he went completely empty on me. I tried restarting several times more and it begins as bright until properly on newspaper and he then he goes empty dark again on me. I tried the BIOS setting, but nothing happens... I believe that I have installed the drivers screwed something... I well surly need help here.

  Thank you
  Dave

  I gave it try but without success. No idea how to install the driver in safe mode

  You could use the system restore and roll back to a point just before that you have installed the drivers.

  A little advice about these utilities "update Driver", ditch just them!  Basically, they cause more harm than good, and some of them are dangerous simple!  You don't need those utilities and nine times out of ten people update their drivers for no other reason that they think that the new drivers are better than work perfectly those they already have.

  John

• Printer print printing printer will not align. Worked very well, put in new cartridges and now will not align.

  My HPPhotosmart C5580 all-in-One worked very well.  Put in new cartridges and now she is not aligned.  Have you tried several maintenance task to get it to reset zero, etc, but nothing seems to work.  Help.

  This isn't a matter of Microsoft but a problem of HP; See http://h10025.www1.hp.com/ewfrf/wc/product?product=3575276&lc=en&cc=us&dlc=en&lang=en&cc=us. There are also Forums of HP Support for printers.

• CP1215 reports that all of the color ink cartridges are empty

  HP CP1215 reports that all of the color ink cartridges are empty, but they were rarely used, the BLACK toner then indicates 72%, all three color inks report 0%.

  Hello

  Thanks for the post.  It's weird, there's a way to go beyond this message, I have included a link below with the explanation and why this happens.  Good luck!

  http://support.HP.com/us-en/document/c01905250

  http://support.HP.com/us-en/document/c01788825

• OfficeJet Pro 8500 depleted a color ink cartridges - printer will print not except if replaced

  When one of my color ink cartridges is empty ink, my printer does not print until the ink cartridge is replaced.  Of course, I go out and buy new and install it then get the message that another cartridge needs to be replaced!

  I only print in black ink in all cases.  Is it possible to print only black ink without replacing color cartridges are empty ink?

  In addition, if a color is exhausted, I should automaticall replace all color cartridges?

  Operating system: Windows XP

  Officejet 8500 printers individual ink cartridges (IIC); This machine requires that all cartridges to be installed to ensure that the printhead not damaged. In the printer, the ink is used not only for printing, but retain the printer and the print head. We can reduce the amount of color ink, the printer uses by changing the print in grayscale settings or use black ink only. Page 34 of the Manual shows how to change these settings when you print the documents. For more information on how the ink is used in the printer; It can be considered as this page here where he goes into detail about the different ways that ink is used in the printer.
  I would just replace the color cartridge the printer says needs replacement when the machine alerts you of low ink. I would replace all the colors at a time when only needs replacement.
  I hope this helps.

• The life of ink cartridge and print head alignment failed

  I use an Officejet Pro 8500 A910 and did not have any problems with it until I recently changed the ink two weeks ago.

  I bought HP original on Amazon UK and after four attempts to align the print head (which fails permanently), my ink for all, but the black cartridge high capacity is exhausted.

  I havn't print all pages in full color, black only for the ebay postage labels.

  Hell this printer that consume all my ink in five attempts to alignment?

  HP will reimburse me for the color ink cartridges?

  I solved the problem.

  BUY A CANON INKJET...

  It cost me less than a new set of cartridges for the HP OfficeJet

• I filled my printer with an hp1200 cartridgeworld cartridge and now the printer always says "check printer cartridge? any ideas help please

  I filled my printer with an hp1200 cartridgeworld cartridge and now the printer always says "check printer cartridge? any ideas help please, PS is not the first time I used these cartridges, but this is the first time I had no problem

  Hello

  Follow these steps and check if that helps:

  Method 1:
  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:
  Try to run the below fixit and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  It will be useful.

• Black ink cartridge Photosmart Plus B210a 364 black does not print black.

  Clean the printer heads. Have done everything in my power to solve the prob. No luck.

  All the other colors print.

  Defective cartridge?

  I wouldn't party w my printer because I'm very happy w it. More I have 5 unused ink cartridges and they cost a few .

  Edit: guess what? Soaking, as described in the section resolved this Forum did the trick! Dried the head w printer a couple of (very gently tap) coffee filters and this is! The printer print black!

  Phew!

  For others looking for a solution, the details of soak the printhead for printers with removable heads are available in the post here.

• I downloaded the new software recently and now my Epsom printer does not work

  iMac late 2009. Processor 3.06 GHz

  Hi, I downloaded the new software recently and now my Epsom printer does not work and my Wi - Fi on the computer keeps dropping out.

  I spoke with Epsom and they recommended to remove the drivers and reinstall them. Now, I can not install the ad pilots Wi - Fi does not work correctly. The research on this forum I see there have been many problems with the new version of the software. Can someone help me?

  < re-titled by host >

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

  Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

  Hey there Scotchman2926,

  I understand that you are experiencing some problems with Apple music on Sierra. I have a few suggestions to help you solve this problem. First of all, if you are unable to access the iTunes Store as well as music from Apple, use the information in this article to help resolve this problem:
  

  If you cannot connect to the iTunes Store - Apple Support

  If this does not resolve the problem, you might try signing out of your Apple ID in iTunes and then connect again.

  Thanks to be come to the communities of Apple Support and let us know how it goes.

  See you soon.

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.