2.4 Gb RAM is usable out of the 6 GB installed memory

Similar Questions

• 4 GB system RAM shows usable 2.75

  Mr President.
  I use Windows 7 genuine version and my system following configurations
  HARD DRIVE: 500 GB
  OPERATING SYSTEM: WINDOWS 7
  RAM: 4 GB
  : 11 3 GH ATHLON PROCESSOR
  But the system showing 2.75 usable space for the RAM of 4 GB of RAM, please guide us to improve space RAM in my system to fix my system speed and
  to speed up the system, please guide me the techniques and solutions or advice
  and also guide to speed up the internet in my system.
  Mr. bond 007

  If you use a variant of 32-bit Windows 7.

  There is a limit of address space TOTAL of 4 GB for 32-bit Microsoft operating systems.

  The card mother and video card requires little RAM depending on the configuration. The total memory is developed taking into account first of all hardware resources, and then RAM is added for a TOTAL of 4 GB.

  If you want to get the best out of 4 GB of RAM or more, you must run the 64-bit version operating system.

  Note that even the 64 - bit variants may lose 0.25 GB where only 4 GB of RAM is installed.

  Speed of the Internet is well governed by the speed provided by your ISP, which is in turn linked to what level of speed you pay your ISP.

  It can also be affected by malicious software and browser tool bars. Uninstall all toolbars on your computer and as a first step towards malwware, download and run Malwarebytes...

  http://www.Malwarebytes.org/

• Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  On Wednesday, March 6, 2013 15:02:32 + 0000, DanielOrtner wrote:

  Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  3.6 GB is a very good number - much higher than most people's.

  All versions of Windows 32-bit client (not just XP/Vista/7/8) have a
  Address 4 GB of space (64-bit versions can use much more). It's the
  theoretical upper limit beyond which you cannot go.

  But you can't use the whole address space. Even if you have a
  Address space of 4 GB, you can only use around 3. 1 GB of RAM (and as I
  said, you do much better than that). This is because some of
  This space is used by the hardware and is not available for the operation
  system and applications. The amount you can
  use varies, depending on what hardware you have installed, but can
  range from as little as 2 GB to 3.5 GB. It's usually around
  3. 1 GB.

  Note that the hardware is using the space, not the real address
  The RAM itself. If you have a larger amount of RAM, the rest of the RAM
  goes unused because there is no address to map space to.

• What is the ram max usable in each grade in my 1119tx want m6 notebook

  What is the ram max usable in each grade in my 1119tx want m6 notebook

  Hello

  It supports up to 16 GB, as noted on page #4 the third manual in the link follong

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&product=5344330

  Kind regards.

• Is it better to have GB usable (at speed = 667 mhz) RAM 3.00 or 4.00 GB of RAM (with usable speed only 2.99 GB = 800 mhz?)

  Original title: RAM

  Is it better to have GB usable (at speed = 667 mhz) RAM 3.00 or 4.00 GB of RAM (with usable speed only 2.99 GB = 800 mhz?) I apologize if this sounds like a newbie question, but I'm not too familiar with that.

  3 GB sticks are 5300 and sticks of 4 GB 6400, if it matters?)

  Hello

  If you have Windows 32-bit instead of 64-bit so not all 4 GB cannot be used.

  As I said, download the 4 GB at 800.

  Rob - SpiritX

• Usable memory (RAM) less than the installed memory, showing remove Win7 dual-boot.

  Original title: "Memory (RAM): 12,00 GB (3.62 GB usable)", how can I resolve this issue and remove a dual boot Win7?

  I recently, after experincing problems (see below the Intel SSD), noticed the system said that there is only a 3.62 GB of Ram available in my computer.  I have this statement ' Installed Memory (RAM): 12,00 GB (3.62 GB usable) "the computer has always used a higher around 10-11 GB amount.

  I noticed that the Windows performance index was 5.6, after adding an Intell 240 GB SSD, it jumped to 7.6; However, now with the problems is 5.4, caused by the RAM.

  I ran the full memory diagnostics: start-up and verification of memory it says I have 12 GB of RAM can be used across both.  I asked with Asrock if my RAM and CPU compatible before buying it, and they said it was a wise decision for 970 Extreme4 motherboard.  I subsequently has inquired about the Kingston RAM and included information from a - Data, and they said they used Kingston ringout for approval process as with a - DATA, including the compatibility of the different types of RAM used together.  The RAM was tested and is placed on the store of the computer.
  This problem did not exist until I installed the Intel SSD.

  I don't have a problem with dual boot on my computer after installing a new 7 ultimate on the SSD, and when it worked normally, I atttached the old hd back into your computer, because important data it contains.  This caused a situation of dual-boot.  I did some research and jumped the drive as a slave thinks that it would not cause a problem.  How can I remove Windows 7 from the old hd and then remove the window dual-boot.  I tried the old way to change the startup configuration, however, I can't find it in 7 Ultimate SP1. I also sent the old HD and the start window remained, as the index and the usable Ram 3.62.

  My Questions as already said:
  How can I return to a usable 12 GB of RAM and return the highest Index of Exp Win?
  How the dual boot can be edited to boot from my SSD without window startup and remove window 7 my old HD eventually without formatting?

  The system configuration:
  Processor: AMD FX FD8300WMW8KHK 95W Vichera 3300 MHz

  Memory: ADATA DDR3 1333 AM2U139C4P2 - s 4 GB x 2
  Kingston DDR3 1333 KVR1333D3N9 / 2g x 2

  Graphics card: MSI GeForce GTX 750Ti Gaming

  Motherboard: ASRock 970 Extreme4

  Power: 600 W power supply

  HD: IntelSolid State Drive 240 GB 335 Series

  OS: Windows 7 Ultimate 64 bit SP1.

  The version of the BIOS/Date: 32 MB FRIEND UEFI BIOS legal with GUI support version 2.60

  NISH

  When you are satisfied with your problem is solved, please mark the answer. It helps others see what answered your question.

  If you posted the original question, you can mark the question as yourself have. Just click the mark as answerbutton.
  Source: http://answers.microsoft.com/en-us/page/faq#faqAskQuestion8

  You should see the response from Mark (and have found this useful Me) buttons on all messages, except your own messages, sent by others about your. They are there to allow you to tell other users, messages that you have found useful, and ultimately what solved your problem or answered your question.

• ' Installed memory (RAM): 8.00 GB (3.12 GB usable) ", what does that mean?

  Recently, I added 4 GB memory to my existing 4 GB, for a total of 8 GB of RAM.

  After installation, I checked system properties to find this info.  ' Installed memory (RAM): 8,00 go-go (3.12 useable).
  In addition, 'Windows Experience Index' before when I had a single 4 GB stick was 7.4, now after adding another stick of 4 GB, it came down to 5.9.
  Does this mean the extra 4 GB of RAM, I added is not used and is only slow down my computer?
  If yes how to do all 8 GB of usable RAM and have a higher Index Win Exp?
  The system configuration:

  Processor: AMD Phenom 2 X 4 955, 3.2 Ghz

  Memory: Corsair DDR3 (CMV4GX3M1A1333C9) 4 GB * 2

  Graphics card: Nvidia GeForce 210, 1 GB

  Motherboard: ASUS M4A78LT-M THE

  Power: iBall 350 W power supply

  OS: Windows 7 Ultimate 64-bit.

  The version of the BIOS/Date: American Megatrends Inc. 0801, 17/01/2011

  Assuming that it is memory under-score, it probably means that the memory is not fully compatible

  http://www.Corsair.com/learn_n_explore/ is a website that ensures that you get compatible memory

• Why properties system displays installed memory (RAM): 8,00 (3.47 GB usable) GB

  Why properties system displays installed memory (RAM): 8,00 (3.47 GB usable) GB
  Windows Pro 64-bit
  8 GB RAM
  1 TB harddrive
  ASUS P7H55D - M EVO motherboard
  New Windows installation has the same problem.

  Control Panel > system does not show the usable memory, only the memory installed

  The Task Manager > Performance demonstrates both installed, available and free

• Minor scratches on SS 2 series out of the box

  I am very happy that my watch stainless steel series 2 has been delivered today! Hope you are all enjoying your. After an inspection of the watch, however, I noticed very slight/minor/extra fine scratches on the screen, mainly on the top and the bottom of the screen where the curve begins, but also a bit in the middle. Once again: scratches are very minimal and is only visible when shine your flashlight of the iPhone (or any other light RAM) directly on the screen and looking closely in some angles. It seems that this has happened during production, probably during some polishing of the watch or other routines (because the stripes are mainly on the curves of the screen and pointing in the same direction). Really in trying to decide what to do about... Some of you SS series 2 owners would be so good to check that out and let me know what your watch in bright light looks like? Once again: it is very difficult to see if you need to use your iPhone light therapy lamp or other direct light source. I read a few threads on the coating that was applied to the screen (also described in the manual). Some suspect that this coating scratches easily, however I think it is strange that the watch is delivered striped out of the box. Especially since this Sapphire screen must be very hard to scratch.

  Make an appointment at the Genius Bar in Apple for the service. If you need a Apple Store - find a store - Apple. Take it within 14 days from the date of purchase for Exchange do for a not scratched. We cannot help you here, and these forums aren't complaints because Apple isn't here. We are all of the users like you.

• Satellite A300 power suddenly goes out during the race for hours

  Dear users of the Forum,

  I am facing a strange problem in operation.
  My laptop Satellite A300 is suddenly down power during the race for hours.
  It is auto off not exactly. Not the way windows stop, is rather like strength to off (as when I press on & power button to stop force).

  This happens automatically, starting again, the screen saying "windows does not stop properly, start windows normally" is apperanig.

  I suspected virus infection, I tried full scan with nod 32, essential microsoft, kaspesky - 1 by 1 (previous uninstall and install the new), but all the antivirus intremediately scan stopped due to this power off.

  Watch movie also stopped in the Middle, attempted to convert the movie file format also was arrested several times because of this problem of automatic disconnection.

  I tried to run only on the power (remove battery) and got the same result.

  can anyone identify the problem? can you please give me the solution?

  smarjit1

  Hello

  I put t think it is s virus.
  En me it looks like overheating. Eventually the high internal temperature requires the laptop to close. This is done automatically to prevent the equipment from damage
  I'm not quite sure what could cause this exactly, but in most cases the dust inside the fans affects cooling performance and lead to a temperature higher than m.

  Higher temperatures could affect the RAM modules too, and perhaps that is the reason why some applications don't work properly.

  What to say; try to clean the cooling fans using a jet of compressed air and check out how the laptop would proceed

• G7-1329wm Pavilion: 1329wm RAM Dual Channel. Update the bios?

  I bought 8 gigs of RAM laptop for my G7-1329wm Pavilion. Here it is:

  http://www.Amazon.com/GP/product/B00OUK919M?PSC=1&redirect=true&ref_=od_aui_detailpages00

  

  It is already much faster than what I had before. My problem is that I expected to run at a speed of 2133 MHz and dual channel mode. CPU - Z does not have these results.

  

  The two RAM slots show the same thing.

  It made me start to wonder. Maybe my cell phone does not support dual channel mode or these speeds. So I was wondering if I could do a BIOS update if everything goes well accept more modern equipment and their speed. I checked in CPU - Z that my bios is old path, return from 2012. I couldn't find any support for an update through HP. Can an HP expert please let me know what I can do to get the most out of my RAM speed?

  

  Repair:

  DDR3/1333 MHz (DDR3-1600 (1 GB / 2 GB / 4 GB / 8 GB) modules of memory supported as an alternative source for the DDR3-1333)

  So max the card/motherboard/BIOS processor speed will allow the memory runs is at 1333 mhz. I'm frankly surprised the memory you have installed works at all. It's the equivalent of putting gasoline in an engine that can be only ordinary.

  The problem goes well beyond BIOS. The chipset can operate at the maximum of 1600 mhz, and HP has set up to run at 1333.

  It is the specified memory:

  Memory modules (DDR3 10600 1333 MHz 2): 4 GB 621569-001

  http://www.Amazon.com/HP-621569-001-1333MHz-PC3-10600-SODIMM/DP/B005UF674S/ref=sr_1_1?ie=UTF8&QID=1457907477&SR=8-1&keywords=621569-001

  It may seem paradoxical, but your laptop can actually run a little faster and in double channel if you put in the slower memory. You can see there is a lot of information in gray in the CPU - Z I think because the system is not able to see all the technical features of memory, that she does not expect to be there.

• I'm unable to "get out" of the language bar to appear in my taskbar.

  Missing language bar

  Hi all, hope someone can help me solve my problem here. I m unable to "get out" of the language bar to appear in my taskbar. I followed the instructions in the window help by installing the language, but it seems that the "language bar" is not available on my toolbar option.

  tulipmelody, the links provided are order of registry editing which can be placed in the Notepad and run as a batch file.

  Before I provide you with detailed instructions on how to do it, I want you please check and make sure you have an additional language added to the keyboard settings, without him the language bar will not be an option in the menu of the taskbar.

  Add to James's message, follow these steps:
  Click Start-> Control Panel-> regional and Language Options.
  Click on the "Keyboards and languages" tab and then click on "change keyboards.
  Here the tab general, you need to add a secondary language to your keyboard, otherwise you will not be able to display the language bar. To do this, click Add and select the language you want to use, click OK.

  Once you have verified this, I can then provide you with more details on editing the registry. Of course, we want to ensure that it is not necessary first, as other options to resolve this problem. Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Bought Office Acrobat 11 DC Pro to my PC running Windows 7 - I have more than enough RAM and storage, but get the message: "this application cannot be installed on this operating system. The installation program will end now. Please refer to the minimum s

  Bought Office Acrobat 11 DC Pro to my PC running Windows 7 - I have more than enough RAM and storage, but get the message: "this application cannot be installed on this operating system. The installation program will end now. Please refer to the minimum requirements to... "Can't determine the location on the Adobe Web site to get answers. Any suggestions?

  I deleted an earlier version of Acrobat Pro from my computer. Still, I get the same message.

  Hi John,.

  Please specify if you have purchased DC Acrobat or Acrobat 11 or upgrade you to the latest patch for Acrobat 11, that is to say 11.0.11 so that we can help you accordingly.

  I wonder if you have checked your system requirements before you download Acrobat.

  I would also ask to share with you the screenshot of the error message with us.

  You could probably uninstall Acrobat using cleaning tool. Here is the link for the same thing.

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  If you were installing DC, check out the following link to download.

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html (classic)

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-DC-downloads.html (continued)

  Concerning

  Sukrit diallo

• How to run tenants melted precision and outs in the middle of the clamp for mounting in hearing spoken 6.0?

  Unfortunately, I like many others, had to move to Windows 7 from Windows XP and not all features in Audition 3.0 will run on Windows 7. I am now using hearing 6.0. I edit tracks of voice of spoken for several networks. Often in the edition in the "Edit Mode" must be melted or not a specific word when taking the failures or errors or rebuild a sentence to his natural. 3.0 has been intuitive and easy to use that I could define a range and determine EXACTLY how I wanted to fade the ins and outs of sound. It seems that 6.0 designers forgot that fades of precision are needed in the middle of a clip for the edition of spoken word in the edit view. The only way I see is to use the fade in and out in the 'Favorites' pull-down menu and highlight the range of the predetermined fade. It seems that 6.0 developers are only concerned about fading the beginnings and the ends of a clip. With each new feature 6.0, the simplest and the most important functions in 3.0 have been abolished or made less usable. After use Syntrillium Cool Edit 2000 at each iteration of Adobe Audition, Audition 5.0 was a disaster and 6.0 is somehow an improvement. I did thousands of hours of network programming and work of voiceover using Audition 1.5 and 3.0. I hope that Adobe listens to its loyal user base.

  I understand your concerns on the future of this software. I cut my teeth back to Cool Edit 1.0 and have loved it since then. Tweaks that happened since then were not so good.

  To fade you speak, I want to go into the menu to --> Amplitude Compression &--> bland envelope. There you can choose an envelope tweaks to share model and on the other a clip and bend it to your needs.

  Steve

• I need my iPhone 5 to numbers automatically several times a month to keep my number as I am out of the country

  IPhone 5

  I want the phone to make a call by month automatically while I'm out of the country to keep my phone number.

  This seems unusual to me. Why and who do you call to keep your phone number? Do you take your phone with you when you travel? Just set up a reminder that you make the call. I'm not aware of any way to have the phone to make the call. Should what type of response you do when you get that call? I don't see how having the phone automatically call a number no response after that the call would end would solve anything.