Similar Questions

• How to enable access to a port for my mobile phone application to access. When I try to connect I get error socket is closed.

  I have purchaced an app for my phone android mobile facenate which can access my computer remotely.  When this trys remote app to connect to my computer, I receive an error message that says the socket is closed.  What I need to know, is how to open a port for this app to access my computer.  Also I got an error that I do not have a public IPV4address that may have something to do with it.  I have win 7 64 bit. I would be so happy if someone could help me; I'm really ready to see this app works.

  Hello

  I suggest you follow the steps in the link below and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

• Highway X8.2.2, Changing default SIP Port for B2B calls is not possible

  Much of community support.

  I 10.5.1 (SU1) of CUCM and X8.2.2 Expressway.

  I have configured without VPN Jabber and B2B based on the Document calls "CVD-CollabEdgeUsingBE6000 - Apr14.pdf.

  everything worked fine for months, but after the upgrade of the X8.2.2 Express way B2B calls are no more work.

  After troubleshooting, I found the following:

  the DSF Guide tells me to change the default Port to 5061 to 5560 B2B calls because 5061 is also used for the integration of Jabber.

  When I look at my record of wirekshark I see cucm tries to connect to the port 5560 expressway, but after sending a SYN packet, cucm receives a RST packet.

  When I change back to the port of 5560 to 5061, everything works well again for B2B, but of course encrypted calls Jabber connection is not possible more.

  for me, it looks like a bug, but I found nothing on the 'Bug search' tool.

  I also tried to disable all Protection rules and I also have a firewall rule for Port 5560. I also tried to change the TCP Port to something different, 3999 for example. All this without success.

  Just a little look in the guide.

  Two caveats. First thing the guide explains unencrypted SIP - TCP connections, if you want to be aware that both sides use TCP or TLS. If you are using TLS certificates must be good as well.

  5560 isn't a port on the highway, this is the port for the trunk on CUCM.

  What do you see CUCM sending to Highway: 5560 Setup is not ok.

  The port of the highway will not be changed.

  If you look at page 30, he 5560 port is used for the "incoming Port *" and the bottom of page 31

  You can see that it uses the Expressway IP with port 5060.

  On the highway, you configure the area to port 5560 (page 34)

  And of course the firewall should also be ok.

  Please note messages posted under the stars below and set the thread if it's an answer!

• Charged for something not bought

  I received an invoice in itunes by email for something I've ever bought.  The e-mail indicates that buying was by an iphone that is not mine.  How the hell I do not charged for this and also to avoid it happening again

  Hello

  I see three possibilities for what happened here:

  1. it's a phishing e-mail.

  2. someone of another share your Apple ID and does not tell you they have renamed their iPhone or switched to a new.

  3. your ID Apple is compromised.

  You can sign in to report a problem or use iTunes on a Mac or a PC (see your purchase history in iTunes store on Mac or PC - Apple Support) and see past purchases made from your account. If you see something that shouldn't be there, contact Apple directly. On the Web page report a problem , there is a button next to each purchase made during the last 90 days, allowing you to more, to report a problem.

  If you don't see any purchase that would explain fees that you saw on the invoice, the invoice is perhaps wrong. Here are tips from Apple on the phishing emails:

  Identification of legitimate emails from the iTunes Store - Apple Support

  Identify the fraudulent 'phishing' - Apple Support e-mail

  http://www.Apple.com/legal/more-resources/phishing/

• Apple continues to try to pay for something?

  So I'm and it keeps giving me the message ITunes cannot pay for something. I went in some applications that require payment, so I deleted them. I went to redownload hem but it says ITunes cannot accept purchases at this time, when they are free applications?

  According to Apple, http://www.apple.com/support/systemstatus/ it seems to be a problem and they are studying. Check this site to see when it gets corrected. Even free applications through the iTunes store, it looks like a purchase.

• I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

  I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

  It is easier to go to YouTube, which I prefer not to do.

  < published by host >

  It's real comments to your message:

  You talk to other users here, not to Apple directly.

  Click below and select the product (s) on which you have any concerns or suggestions:

  http://www.Apple.com/feedback/

  Then select your product

  When you contact Apple to give them feedback, note the statement at the top of this page:

  'Use the form below to send us your comments. We read all comments

  carefully, but please note that we cannot respond to comments you

  submit. »

• I just bought a keybboard ultra thin logitech for iPad air. It has a port for a small cable, but no cable in the box. What is the port for, and what don't get me?

  I just bought a keybboard ultra thin logitech for iPad air. It has a port for a small cable, but no cable in the box. What is the port for, and what don't get me?

  Have you tried the Logitech support site?

• Satellite T130 - 10G: extra port for mini SSD?

  Hi there :)

  I found an empty port in my T130, near the port of hard drive, see also here-> [klick | http://www11.pic-upload.de/08.07.14/3aosd93avlc5.jpg]

  It's a job mSATA-Port for mini-SSD as "ADATA SX300 mSATA SSD 128 GB"
  so I can use both, _and_ SSD HARD drive? *

  Thank you

  (* for example: Partition boot and Windows: SSD, data partitions: HARD drive)

  Hello

  I'm quite sure this isn t mSATA and this series doesn't support the mSATA SSD definitely m.

  Fact is that belonging to the same series models support different hardware specifications.
  For example: some models have been fitted with one: module 3G miniPCI and module Bluetooth Mini-PCI and some models supported only the miniPCI WiFi card.

• WSD port for printers and TCP/IP ports monitor, what is the difference?

  There are a lot of discussions on IP etc. addresses for printer problems. There is no mention of a new feature for the port for printers, WSD port for plug-and-play printers, I assume that the IP addresses have no importance with WSD, my printer is vaguely configured for the WSD port and TCP/IP port, can someone please expain

  Here is a description I found

  The WSD Port Monitor is a new printer port monitor in Windows Vista and Windows Server 2008.  This port monitor supports printing on network devices that are designed to include Web Services for devices (WSD) technology.  Services Web for devices allows devices connected to the IP-based network announce their functionality and to provide these services to customers using the Web Services Protocol.  Clients and devices WSD communicate on the network using a series of SOAP (Simple Object Access Protocol) messages on UDP and HTTP (S).  WSD for devices offers a plug-and-play network experience that is similar to the installation of a USB device.  Services Web for devices also defines a security profile that can be extended to provide additional protection and authentication by using certificates based on the device.

  WSD is not a port, but a port monitor.  A port monitor looks at information from the TCP/IP port and makes routing or changes based on what happens in the port.

  This link has some in the description of the depth of the WSD port monitor:

  http://blogs.technet.com/b/askperf/archive/2008/02/11/WS2008-the-WSD-port-monitor.aspx

  Back to the comparison of the IP address as a P.O. box.  Once the letter arrives in the POST box, someone needs to come empty the box or letters are going no where.

  When the data comes in the TCP/IP port a port monitor is where I look for that to happen.  The WSD port monitor would take over this function from the standard TCP/IP port monitor.

• Today, I discovered that this Apple store charged me $5.98 for something called Viber credit pack! It is shown on my bank account that itunes charges. What shoul

  Today, I discovered that this Apple store charged me $5.98 for something called Viber credit pack! It is shown on my bank account that iTunes charges. The option to request the password is already enabled in my iphone, but it did not my password confirmation before that happened. What should I do?

  The best thing and the first thing you need to do is contact Support iTunes.

  They will be able to help you with this and he reimburse you if it wasn't a purchase that you have wanted to have.

  Here is the link to itunes support!

  https://www.Apple.com/support/iTunes/contact/

• What is the life line and why am I charged $26.99 for something or other on my purchased iCloud account?

  What is the life line and why am I charged $26.99 for something or other on my purchased iCloud account?

  There is a life saver app in the App store (p 79) and several vital services on Google.   If you are unsure about a receipt, there's an invitation on the bottom to "report a problem".   Report your problem.

• HP - 15 af008ax: my new laptop usb port for the left side does not, only 1 work on 3 Please help me

  My new laptop usb port for the left side does not, only 1 work on 3 Please help me

  Hello:

  Have you installed the drivers for W7 32 bit amd chipset?

  If this isn't the case, you must install them and reboot the PC to get the 3 for usb ports work.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

• Using the Serial Port for data acquisition Non-Serial

  I searched the forums and can't find anything on this topic.

  I saw that it was possible to use the parallel port for e/s digital single and I was hoping that the serial port can be configured the same. It seems all VI VISA only to use the serial port to receive ASCII characters at a given flow rate, but is it possible to simply query the status of the line series at my own speed to see if it is high or low, kind of like a single pin DAQ?

  It seems that it would be possible until the serial data are read and controlled by labview, not Windows. Let me know if you have ideas of how to approach this problem, or any comment as to why it is not possible.

  Thank you all!

  Select the property > settings series > Modem of the line parameters. For example, the State of the CTS is an entry to the pc.

  With the help of these lines is a very poor substitute for a scope or map DAQ. The only things you can return is Asserted, Unknown or Unasserted. The range of acceptable signals is important enough. Anything between + 3 and -3 is an unknown state. Your other signals is + / 3 to 15 volts. What type of signals do you really want to capture?

  Edit: there is no such thing as a visa so I have no idea of what you actually use.

• Set the port for WMI for Windows Server Standard Edition 2003 R2

  Hi guys,.

  Can I know how to solve a static port for WMI using Windows Server Standard Edition 2003 R2?

  Thanks in advance!

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Why am I being charged to my account for something when I buy even not anything MSN

  Why am I being charged to my account for something when I buy even not anything MSN

  Hello

  Well can't help answers. Ask your bank for more information on
  who is responsible for your account.

  Rob - SpiritX