2 problems and solution does not set

Similar Questions

• Reports of problems and solutions does not

  solutions and report problems isn't checking for problems. the only option is to change the settings. the setting is set to automatically check and get the solution and send it to microsoft.

  I checked in the services and it is started. I looked in Task Manager and could not find the service that there are listed.

  Also the Service of diagnosis (WDI Service host) doesn't have a boot option, even if it is automatic.

  What's wrong? How can I fix it?

  Hi Stewfss,

  Perform scan sfc on your computer. (Sfc scan) System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions. To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command calls, the following line and press ENTER: sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Visit the following link for more information:

  http://support.Microsoft.com/kb/936212

  You can also try to clean boot suggested in the thread below.
  http://social.answers.Microsoft.com/forums/en/vistaperformance/thread/4d12687a-bd3f-45AE-9642-61d95d63290c

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• "Problem reports and Solutions" does not

  After scoring in my Windows Vista machine, I am bombarded with notifications "Problem reports and solution" does not. I tried to disable the service, but I still get notifications. I can't find PRS in the control panel. In the event viewer, I found the following:

  Error
  Log name: Application
  Source: Application error
  Event ID: 1000

  WerCon.exe application, version 6.0.6002.18005, time stamp 0x49e026db, module wercplsupport.dll, version 6.0.6000.16386, time stamp 0x4549d345, exception code 0xc000001d, offset error 0x000000000000ce84, 0xda0, failing application start 0x01cd140e4c7b7770 process id failed.

  I can't confirm or deny that usrename of the local administrator account has been changed. It is quite possible. I know that usernames on the pc have been changed to instead of creating new user accounts. I just can't confirm if one of these accounts was a local administrator.

  Any help would be greatly appreciated. It is a major pain in the back.

  SG

  Hello

  1. Your computer is connected to a domain?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you to see link below and check if it helps.

  Windows Error Reporting and reports on problems and Solutions feature in Windows Vista: http://technet.microsoft.com/en-us/library/cc709644(v=ws.10).aspx

  Hope this information is useful.

• I have windows vista and I'm trying to uninstall the hewett Packard software of the printer I bought a printer problem and it does not work because the HP keeps popping up

  Who can relate to Windows

  I bought a Hewett Packard printer and it did not work properly so I bact to the store and exchange it for a printer problem.

  but before he took back the HP printer I do not uninstall the HP with the HP CD software. After installing the software problem I now the HP conflicking with the software of brothers. then when I want to print something the printer HP appears. My question is I tried to uninstall the program from HP and it does not work. I call the Hewett Parkard Tech. and no help there either. So please give me a direction step by step on how to uninstall the software Hewett Parkrad.

  Leon

  See if it helps:

  Three ways to uninstall and reinstall the software of printer/Scanner Hewlett - Packard
  http://www.out-of-warranty.com/three-ways-to-uninstall-and-reinstall-HP/

• I have a billing problem and Photoshop does not work properly how to fix this problem?

  Please answer I need to make this work, I paid the monthly fee of $10,59 and I get no support!

  You need to contact Adobe for you billing issue, it's a user four steps adobe customer support.

  For your Photoshop problems, this community of users can be useful.

  Provide relevant information to get faster answers

  More information you provide about your situation, the better equipped with other community members will answer. Consider including the following in your question:

  • Product number and the version of Adobe
  • Operating system and version number
  • The full text of all error messages
  • What you were doing when the problem occurred
  • Screenshots of the problem
  • Computer hardware, such as CPU; GPU; amount of RAM; etc.

• I changed my setting in private browsing and now does not open firefox. Any ideas?

  I changed my setting in private browsing and now does not open firefox. Any ideas?

  Never mind. After about an hour of not opening, I clicked on the icon and its opening. Maybe someone can explain that.

• I try to open a Web page that previously opened well and it does not load, load it in Solution Explorer, but

  I'm trying to open a Web page that previously opened well and it does not load, load it in Solution Explorer, however. I deleted the cache and cookies, had a peak in the proxy settings does not work, it is not a https / /... Any ideas?

  By chance have you tried Mode without failure of Firefox? It is a standard diagnostic tool in order to avoid interference by extensions (and some custom settings). More info: questions to troubleshoot Firefox in Safe Mode.

  You can restart Firefox in Mode safe help

  Help > restart with disabled modules

  In the dialog box, click on 'Start mode safe' (not Reset)

  Any difference?

• "lcwipx.exe of shortcut that you refer to is not available" and her does not open. He also asked delete me the shortcut. What is the problem and how to solve this?

  When connect my external hard drive and opening not wanting my my files, I get this message "shortened lcwipx.exe you make reference to is not available"and her does not open. He also asked delete me the shortcut. What is the problem and how to solve this?

  Hi Pascal,.

  I see that you get an error trying to access files on an external drive. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. What is the brand and model of the external drive?

  3. what security software is installed on the computer?

  4. have you made changes on the computer recently?

  5A external drive earlier good work?

  6. have you updated to Service Pack 2 installed?

  Method 1.

  Connect a different drive to the computer and check.

  Method 2.

  Plug this external drive on another computer and check the status.

  Method 3.

  Start the computer in safe mode and check.

  Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode

  Method 4.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• "Problem reports" and Solutions do not work

  Running Vista Home Premium.  Under "reports on the problems and Solutions:

  1. "check the new solutions" is gray
  2. 'see problems to check' is gray
  3. "view problem history" is gray
  4. "change" works.  The parameter is set to "look for solutions automatically (recommended)".
  5. "history of solution and problem of Cloar" is grayed out
  It is said there is no solution found - but he says also last checked on September 27, 2008 (it's now July 2009).
  I am the administrator and just to be sure I tried to "run as Administrator".  Nothing different.

  Check that the error reporting Service is running. Type services.msc in the search box on the Start Menu, open the Services Console, scroll the Windows error report and double-click it. If the service is stopped, start it and change the Startup Type to automatic. Jim - MVP Windows Live - moderator of the Forum - live a care - Live Mesh - Microsoft Security Essentials

• Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

  I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

  Hi LOliver,

  Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

  Method 3: Connect the printer to a different USB port and check.

  Method 4: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and windows will automatically reinstall all USB controllers.

   

  HP printer drivers- ensure that you download the driver appropriate for your device model package.

   

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I set up the familysafety.live and it does not block anything.

  I set up the familysafety.live and it does not block anything.  Help

  Hello

  Were there any changes made on the computer before the show?

  I suggest you to refer to the article and see if it helps:

  Protect your kids with parental controls

  http://Windows.Microsoft.com/VI-VN/Windows7/protecting-your-kids-with-family-safety

  Check out the links for more information:

  What can I control with Parental controls?

  http://Windows.Microsoft.com/VI-VN/Windows7/what-can-I-control-with-parental-controls

  Video: Use Parental controls

  http://Windows.Microsoft.com/VI-VN/Windows7/help/videos/using-parental-controls

• unlockSystem() does not work? AND lockSystem() does not work if no password not set

  Anyone ever get unlock API to work?

  And lockSystem does not work unless a password...

  Thank you...

• Error "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." when you connect Logitech M225

  Original title:

  My wireless mouse works fine for the last 2 months, now, all of a sudden it doesn't work at all.

  I get a windows notification that says-

  "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it."

  I have Vista 32 bit OS on my laptop.

  My office has Windows 7 32 bit and I am able to use the mouse on this computer, then the M225 is not defective.

  I tried to look for a download of update on the site of Logitech & only found:

  6.32.20 set - point it did nothing to help.

  I also tried to move the receiver to the other 2 ports USB w / still the same results.

  Are there other downloads or solutions that will help w / this problem?

  You can also try searching for devices strangers (with yellow symbols) in the Manager under the mouse devices and other pointing devices and other devices (if any). Right click and uninstall unknown devices. Then restart.

  Also try the steps below to reset the power of USB:
  (a) the laptop off, unplugged from the wall outlet.
  (b) remove the battery for a few minutes, then reinstall it.
  (c) then restart the laptop.

• Alarm and timer does not iOS 6 s 10

  Help! After having downloaded the iOS 10, my alarms and timer does not work. During the years that I have had 4 different alarms set - 2 in the morning and 2 the afternoon. This morning the alarm at the top of my phone icon was there, so I assumed that everything was settled as it is normally. I was wrong. My 05:30 alarm has not extinguished the next morning. The next day, I could turn it back on, but when I went to all other lights it shuts down another. It would only be standing. So, I opted for the alarm from 05:30 again. With my phone not allowing an alarm to be defined at the time, now I'm going to put it but it randomly turns off its own. I'm FED UP with it! I used my phone as alarm clock years but had to go out and by a real wake-up call to make sure I wake up in the morning. Not only that, but my timer does not work either. What is someone is having these problems?

  I did have the problem where one turn the other goes out, but since I got my iPhone with iOS 10 7 or my alarm not timers turn off. I watched the ticks to zero with no sound, no matter what I do. There is no problem with volume control and I did it with the key "secret" on and outside. I am at a total loss.

• HP officejet 4630: copy and scanning does not

  Since the upgrade to Windows 10 HP 4630 Oficejet stopped working for copying and scanning options.  Print and fax options are OK.  Have updated to the latest version of the software (many times) without success.   Also checked the scan of the computer is turned on.  When you use HP Print and Scan verification pilot doctor fails (unable to communicate with the product). Follow the suggestion without any positive result.

  Have tried everything that I could find on the internet to solve the problem without success.  Any ideas what else can be done or

  the driver for scanning and copying does not work with Windows 10 in all?

  Even if I try to use the only printer with Dell computer off, still can not copy or scan a document.

  Hello! Welcome to the HP community @Stewball1313,

  I read your post about how you are unable to make copies or your Officejet 4630 analyses, and I wanted to respond with my own suggestions. As you can not copy, it is a sign of a hardware problem as copies do not involve the computer somehow. I think the question can be a failure of scan of your description, as for you to open the link I posted below and try a reset and checking the connection of power supply and then try to make a copy again. If copies are still not, I would then contact HP directly to see about a printer replacement or trade for a new unit. If you encounter other problems, let me know and I'll do my best to help you!

  (Note: the Officejet 4630 is compatible with Windows 10 and it has full functionality of drivers available for the operating system.) However, if the problem is a hardware failure, a driver will fix a hardware problem).

  All products - in - One HP - a 'Failure of the Scanner' Message displays on the all-in-one control panel and you cannot scan, copy or Fax

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!