200 series Smart Switch does not, DHCP blocked

Similar Questions

• 200 series smart switch (SG200-18) access to the web interface

  Hi all!
  The system flashes green which I understand means that it is currently using the default IP 192.1681.254.

  1. do I need to connect a computer directly into it to get on the Web site? Or do I just use any computer on the local network that uses an IP address from that subnet 192.168.1.x?   The subnet in this branch is etre.1.x in any case.

  2. these instructions in order to use a computer on the same subnet - what is State only when it is in its configuration by default or always? i.e. I'll only ever be able to reach these switches from a computer within the respective branch?  Or, for example, may switch to the branch 1 (sous-reseau.1.x), be configured to allow access to a computer at the head office (sous-reseau.0.x) or via the VPN (sous-reseau.254.x)? How?

  3. how to respond to pings?

  Hi shead, if you connect this switch in a network with DHCP, the device will get a DHCP address for the IP address of management.

  To be able to get web access to a different subnet, you must set the default gateway of the switch of the device, which will happen the router, the sx200 will not forward anything.

  The switch responds to ping by default then there is another problem.

  -Tom
  Please mark replied messages useful

• on/off switch does not work since the SIERRA

  Hello

  Since I'm sierra os that the on/off switch does not show me the dialogue window in which you can choose between power, reset, disconnect you.

  This is a problem of Sierra? There is an option in the system Pref?

  Thank you

  It works very well in the Sierra.  Simply press the button longer.

• Toshiba 32D345Db connection of Smart TV does not work

  I've set up this TV using the Quick Start Guide and set up a Toshiba TV account.
  He worked the first day.

  Since then I can not connect to this account telling me my log in or password is not recognized.
  I click on I forgot my password and it tells me that my connection is not recognized.

  I tried to set up a new account, but his does not work.
  I know that the wifi connection is OK as U Tube works.

  I also return to zero the to the top of the TV by using the quick start without success Guide
  How to (a) change my password on this account or (b) start again? because without it, Smart TV does not work

  Generally there is nothing wrong with the TV if the Cloud Smart TV service is not running.
  In this case, there may be a server problem: that is to say: maintenance, updates, etc.
  If it's just a matter of time, when this service should work again.

• Wireless communication switch does not work - Satellite A200 - 23 c

  The laptop has been included, and both a WI - Fi connection stopped working.
  Wireless communication switch does not work. Do not ask is it possible to do?

  Your English confuses me a bit little, but can you please tell me what model of laptop you have and what is the problem here?

  Wireless network card is enabled correctly in Device Manager?

• Tecra S1: Rf Ubuntu wireless switch does not work

  Hi all

  I recently bought an Intel mini-PCI wifi card for my Tecra S1 under Ubuntu. It is detected without any problem, Intel provides even native drivers for Linux. However, the hardware to activate wireless switch does NOT work. According to iwconfig, the radio is off. I use the ipw2200 driver which can detect the hardware and the software rf_kill. I can enable and disable software killing RF, but kill him material stays on.

  I suspect that the radio feature is disabled in the BIOS but I don't have Windows running on the laptop over to change the setting. Is it possible to access BIOS options under linux? Toshutils are not supported by the tecra because she seems to have a Phoenix BIOS.

  I hope you can help!

  Edwin...

  Hello

  Tecra S1 supports BIOS Toshiba you can access BIOS by pressing ESC at the beginning of the startup.
  In any case I think you won't find anything in the BIOS.

  If you are not able to use the switch of material on the side of the laptop then the Wlan card is not compatible or the hardware switch is malfunctioning. I would say that the card is not supported.

  Maybe the insulation of the 13 pin might help please check that this son:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19843&MessageID=74074
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15228&MessageID=56522

• Satellite L40-18 X - wireless switch does not work

  Hello

  I installed Windows 7 on Satellite L40 - 18 x, PSL48E, the installation seems correct. After installation I noticed that the wireless switch on/off (power) switch does not. The wireless network is working except the functionality of switch.

  It worked on Windows Vista. I installed all the up-to-date drivers for the network card wireless, including atheros, configfree, chipset drivers, but no effect.

  Please can someone tell me the possibole solution?

  concerning

  Salahaddin

  Hello

  I agree with resident.
  The Wlan switch on the side of the laptop has all the drivers and it works independently of the installed software!

  The FN + F8 key combination that allows the WLan should work on if install you value added package.

  You should also check if the WLan card is set on IT in Device Manager-> properties-> Advanced tab WLan card.

  See you soon

• WRTU54G-TM: switch does not connect

  I have a WRTU54G-TM router that allows PCs to connect directly via its LAN ports without problem.  However, whenever I connect to a switch, this switch does not have a good connection.  I tried several different CAT5 cables and two switches.  The two switches work fine when I take the router out of the loop.

  Here's the catch...

  The router is brand new, I thought it was a problem with the last router.  The company that I got helped me to solve this by phone and concluded that the LAN ports are bad.  Apparently, we were both wrong, that the problem persists.

  I tried with RIP enabled for LAN and "Both", but to completely disable RIP.

  Any ideas?

  To answer your question, Yes.  Yet the answer to my original question was in fact much simpler...

  Usually, I'm the only person in my house that affects my home network.  However, when there was a blip in the Internet just before this happened, the mistress of the House decided to help him out he willingly.  Needless to say, it was without direction and without good knowledge of what to do.  His diagnosis consisted of see the end of a CAT5 cable sitting near the switch.  Since you apparently have a House, she hooked up to the switch.  Unfortunately, the other end of the same cable was ALSO connected to the switch.  This creates a Terminal loop for all traffic based on cable, while wireless works fine.

  Leason learned...  Check your cables.

• Main menu of continuous bridge constantly appear on the screen, the main menu switch does not

  Original title: MAIN MENU

  Main menu of bridge keeps flashing constantly on the screen.  How can it be turned off?  The main menu switch does not work.  Thank you.

  I would check the FAQ of the gateway.

• Assistant smart index does not appear

  Hello!
  I am fighting a serious problem while developing RoboHelp office x 3.
  Assistant smart index does not appear anywhere.
  Don't ~ ~, nothing associated with Smart indext Wizard does not appear in the program.
  Have I not bad installation?
  Someone help me.
  

  Hello dsfda and welcome to our community

  Using RoboHelp for Word or RoboHelp HTTML? Assuming that RoboHelp HTML, have you tried looking at the Tools menu?

  If you use RoboHelp for Word, I'll have to rely on a person who uses this product to answer.

  See you soon... Rick

• Sir my network smart vaio does NOT start after installing windows 7 ultimate 64 bit

  Sir accidentally my real Home Basic 64-bit is formatted when installing Ubuntu 13.04 in a separate disk.

  I have no backup to restore the window as recovery is also formatted.

  I installed windows 7 ultimate 64 bit and all drivers related to it is on th website:-http://www.sony.co.in/support/product/sve15115en/download

  including the original software and driver patches.

  but after that my network manager smart vaio does not work its present only in the menu start when I clicked it nothing happens.it nevers opens.

  Please help me

  do a system restore disc. contact https://www.sony.co.in/section/contactus

• Satellite X 200-219 - the touchpad does not work as it should

  Hi all

  I recently bought a 2nd hand Toshiba Satellite x 200-219. Had some problems with it that I have overcome now, except one... The touchpad does not work as it should. I think that the cable has been damaged at some point.

  So I'm wondering if I should use the same ribbon cable to connect the keyboard to the motherboard or can I get one of a different model of PC Toshiba laptop?

  I tried searching on the net for advice but have resulted in nothing so thought I would try the forums.

  Any help you can give will be greatly appreciated.

  Thanks in advance,

  Lee

  I think you can use the items to the satellite X 205 series since this seems to be the same series as X 200:
  Found some related parts the touchpad:
  Satellite X 205 / X 200 touchpad Board with cable: reference number: K000047950
  Satellite part number for the TOUCH PAD FFC X 205 / X 200: K000047980

  But why you n t come into contact with a Toshiba authorized service provider in your country and order the part necessary and compatible?

• My Pavilion g does not start. The switch does not work. Any ideas how to start the computer?

  My laptop series HP Pavilion G7-1135sd will not start. I get no response from the switch. Some lights come but the display does not illuminate. I tried holding down the power switch for long periods - without success. I tried to take out the battery - also without success. Any ideas?

  Hi @DutchyH,

  Welcome to the Forum.  Sorry to hear of your problem power button on your HP Pavilion g7-1135sd.

  In a situation like this.  You have removed the battery and tried to push the power button with out.

  Have you tried while he was not powered as well.  So basically, remove the battery and hold the power button for 40 seconds with the power cord not plugged in.  Then replace the battery followed by power cord.  Then press the power button again.  If it does not at this stage I would contact HP support by phone.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Telephone support for other regions.

  I hope this has helped you.

  Thanks again for posting and have a great day.

• (PIV) smart card does not work when users of switcing

  Cannot connect to a system of users by using the switch user or the connection of the credentials to install the software with the PIV card.   PIV card is mandatory on our WAN/LAN.  The PIV card does not work by using the switch user or during the installation of the software as an administrator.  The cure is the reboot and then log in as an administrator, however, you run the risk of the user to lose their jobs...

  Have you contacted the developer of the authentication system of smart card on the problem you are having?

  You should also consider posting your question on the TechNet forum for THIS professional related issues such as this:

  Technet forums - network of Windows 7

• macOS Sierra 10.12 and 10 Mail: smart mailbox does not

  Hi people,

  After macOS 10,12 intelligent ball of the mail 10.0 update Sierra is no longer in effect.

  Case: Create a smart mailbox, which displays all messages (Inbox, sent, archives, etc.).

  The smart mailbox selections below:

  

  In OS X 10.11 El Capitan: All messages have been selected correctly

  Under macOS 10.12 Sierra: only old messages before update date are selected.

  What has been experienced difficulty: smart to delete and recreate from scratch mailbox > does not.

  Thanks for helping out.

  Wolf

  Hi people,

  brief update: discovered that - after several days - spotlight indexing is still active. So strongly assume that this oddity Mail 10.0 is down to the indices not being ready to be read.

  I will update this post when indexing is complete.

  Reg,

  Wolf