2nd monitor output only Panel source display.

Similar Questions

• C20 discovered appears only not on the 2nd monitor after upgrade firmware to 6.1.1

  Used to run 5.x and if not on a call that the left monitor would display the menus and the wallpaper while the 2nd monitor would show the Self discovers C20

  If in a VC call key participants would be on the left monitor and discovered or presentation would be on right monitor

  When upgraded to 6.1.1 changed the scenario above:

  • If not on a call the left monitor would display the wallpaper and the menus and the 2nd monitor only show black, discovered in PIP mode on monitor left (codec is set to dual display)
  • If in a VC call, key participants would be on the left monitor and presentation on the right monitor but the display of the self are in PIP on left monitor

  Check the codec settings and everything is configured

  Thank you

  This is a common question. This is limitation of TC6 which will be set on TC6.2. Please, follow this topic:

  https://supportforums.Cisco.com/message/3965573#3965573

  Paulo Souza

• With first CC, I am trying to display the RGB parade. But when I go to 'view' in the settings of the monitor, I only see a "composite video", "alpha" and the options of several cameras. When I look at the tutorials, "RGB Parade" and other display options

  With first CC, I am trying to display the RGB parade. But when I go to 'view' in the settings of the monitor, I only see a "composite video", "alpha" and the options of several cameras. When I look at the tutorials, "RGB Parade" and other display options are there in the video tutorial. But they just do not appear in my software.

  Which version of CC do you use? Numbers, please! And your BONES... and I think you're looking in all the wrong places.

  The CC2015 ranges are found on a "Lumetri Scopes" tab in the top left panel so the color workspace and the central panel Lumetri Scopes tab in the workspace of the effects.

  

  Looks like you're clicking in the program monitor, but this is not where the scopes...

  Neil

• I closed FF in my 2nd monitor, now it opens only, why?

  I moved from the 2nd monitor into the primary and closed it there. I've deleted ALL the cookies/history, I erased the Sessions. Nothing seems to make open upward in one monitor. This happened once before and I didn't fly over to the correct monitor and shut up and it worked fine. This time, I can't do what he's supposed to do. I really want to open on the monitor one because I don't always have it and it's really annoying when it opens here and I think I'm always waiting for him.

  It is quite common that the programs Windows remember the location of the last closed window. Can you drag to the monitor 1 and shut up there next time? I see that did not work.

  Otherwise, you can rename or delete the file that stores these positioning information. Unfortunately, that will also clear your toolbar customizations. Here's how:

  Open your current Firefox settings (AKA Firefox profile) folder using

  Help > troubleshooting information > "view file" button.

  Switch back to Firefox and output

  Pause while Firefox finishing its cleanup, then rename localstore.rdf to something like localstore.old

  Restart Firefox. Toolbars and the position of the window must be restored to the default.

  (Theoretically, it is possible to edit localstore.rdf if you want to try that first, but the format seems not well documented).

• My 2nd monitor does not

  My 2nd monitor is completely black except for a travel box with "not optimum Mode, recommended Mode 1280 X 1024 with a?," I restarted my computer and checked the connection without change, can anyone help please?  It was working fine until I unplugged the cable to use laptop computer only, and then when I plugged back it it shows is no longer.  Any help would be greatly appreciated.

  Hello

  These should help:

  How to set up dual monitors in Windows 7
  http://www.online-tech-tips.com/Windows-7/How-to-Setup-dual-monitors-in-Windows-7/

  Two screens are better than one
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Multiple monitors: frequently asked questions.
  http://Windows.Microsoft.com/en-AU/Windows-Vista/multiple-monitors-frequently-asked-questions

  ==================================

  You may need to update your display and video driver

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How/where to hook up 2nd monitor

  I just got a new XPS 8700 with what appears to be TWO video - in ports, a DVI and a HDMI.  I use a configuration of two monitors with extended desktop view; a monitor has DVI, so I plugged into this port and it works fine.  The other monitor is old and has only VGA, so I bought a VGA--> HDMI adapter.  I guess this gets plugged into the video card HDMI port.

  HOWEVER, there is another HDMI port, which is apparently a HDMI audio/video OUTPUT.  It makes no sense for the 2nd monitor into this port, because I don't mean to just output signal from the video card to a monitor/screen, but use TWO monitors at the same time and put in place the extended desktop view.

  I'm a little confused by the existence of ports HDMI TWO, one on the video card (next to the DVI in), the other has a few inches apart.  There is also a display port, but I have no idea how to use. I don't want the top screw to the top of the machine or video drivers by plugging this old monitor in the wrong place.

  All tips, suggestions, ideas, answers?  Thank you.

  Yes, the configuration of your 2nd paragraph would be the correct way to do it. My only preference would be to connect the DVI monitor HDMI port with an adapter and plug the monitor VGA DVI port with the corresponding adapter.

  If the HDMI to VGA is the 'decoder' then this configuration ^ ^ ^ would be much more profitable. The converter is usually at least $30 - $40, but the DVI to VGA and HDMI / DVI connectors can be acquired for around $15 - $20 for the pair.

  As a manufacturer of computer I I would say that it does not matter if you connect your monitors with computer or offshore, but as a consumer on a Web site you need a guarantee of manufacture, I would say it would be the best idea ^_^

• Dell Inspiron 3043 All in One-2nd monitor?

  My dell is not detect a 2nd monitor when I connect it to my Acer monitor.  I tried to use the VGA cable with a HDMI adapter.  I also tried to use a DVI cable to HDMI.  The Acer monitor only has VGA and DVI - D connections?  Is there another way to connect the 2nd monitor?

  I have the Dell Inspiron 3043 all in one

  You can consider using a USB2 > DVI - D or USB2 > adapter VGA to connect the second monitor, but they are not exactly cheap.

  And if you buy one of these adapters, make sure that the one you get can clone (1) internal display, (2) extend the desktop on 2 screens and (3) show 2 different screens simultaneously and is compatible with any version of Windows that you are using.

• FF always opens in 2nd monitor

  I have two monitors and sometimes to define my 2nd monitor as master during software testing. Go back to use my 1st primary monitor (using the display settings) I find FF does not take into account the changed value and will always open on the second monitor. Back to zero does not solve the problem. All other applications open in primary education.

  A way to solve this problem?

  If Firefox is maximized and then minimize the window and drag the window to the correct monitor and close Firefox to save the setting.

  After the reboot, you can maximize again.

• With the help of a 2nd monitor with HP ENVY bow 27-k009 TouchSmart all-in-One desktop PC

  I would use a 2nd monitor with my HP all-in-one, but I can't figure out how to do this.  Our it guy says it can be done by using a VGA cord DMI but it does not work.  An another computer guy told me to get a USB cord with a graphics driver and technology at Best Buy told me that it is not possible to use a 2nd monitor with this all-in-one specific.  Please let me know if it is possible and how I would go to do.

  Here are the specifications of your HP ENVY tilted 27-k009 TouchSmart all-in - One desktop PC. Based on the specifications, this model, is a video output any. The HDMI port on the side is strictly an ENTRY;

  

  3 HDMI input

  To connect your computer to an external monitor, you will need to buy an adapter USB-to-video, as EVGA UV plus + UV39 or many other cards on the market.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• X 1 carbon (A 20, 7) - what is the output of the mini display port?

  Hi all

  I have the 1 carbon - Type 20A 7 X

  I wanted to know what is the output of my mini display port

  What is 60 Hz? 30 Hz? ...?

  To connect a screen 4 K my machine, I need things

  1. that my graphics card will support a 4 K display

  2. I need the mini display will result in 60 Hz

  This is why I need this information

  I checked everything autour with Lenovo and all and can't find an answer

  I would appreciate your help

  Thank you

  20A 7 (and A 20, 8) - Type of Machine belongs X1C generation 2.
  There is no machine X1C Gen4, 'only' Gen3 (MT 20BS, 20BT)

  Specification of the platform is on the next page:
  http://PSREF.Lenovo.com/product/158?Mt=20A7

  The detailed specifications of your model appears a little later on the site above. Or download the file below and watch your model:
  http://www.Lenovo.com/PSREF/PDF/ThinkPad.PDF

  Information on factory installed on your laptop parts are here (computer type laptop s/n):
  http://support.Lenovo.com/us/en/ibasepartslookup

  Remove s/n of your post above for your privacy.

• the 2nd monitor resolution

  Hi all

  I'm working on an application that uses 2 monitors.

  I have a VI that measures the resolution of the screen.

  I want to know the 2nd monitor resolution.

  How can I get that?

  Thank you

  Ritesh

  You can use a property node application, the display value-> AllMonitors. Index of this with an array and ungroup the result. This will give you information on the limits of the screen. By subtracting from left, right and top to bottom. You can get the size of the screen.

• Change the problem of direction of the cursor with new 2nd monitor

  original title: problem of direction of the cursor with new 2nd monitor

  I just added a 2nd monitor to my computer. The 2nd monitor is left of my laptop but I have to move the cursor to the right in order to get on the new monitor. How can I change so I can just move my cursor to the left and get it on my new 2nd monitor?

  Right-click on the desktop and then clicking display settings by clicking Customize to open the display settings. In the display settings box, click and drag the image to the monitor 2 to the left of the screen 1. Click on the button apply, then check. Click Ok to exit.

• How to install and run a 2nd monitor

  How to fix, install, or run a 2nd monitor of my laptop? Windows Vista

  Hello

  Do not forget to check with your system manufacturer, the documentation online and the drivers and their
  Forums (if any).

  Your laptop should have a video which will allow to another monitor be hung and more
  the built in LCD. You then decide if you want that the monitors to display different
  programs or be used as a large screen where you can move programs from one screen
  to the other.

  Of course your system, a video camera and its drivers have to support with a 2nd monitor.

  Two screens are better than one
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Non - generic pnp on the 2nd monitor and no sound

  Original title: generic Non - pnp on the 2nd monitor

  • 2 monitors... Left (23 1/2 ")... Law (21 1/2 ")
  • ........................................ DYNEX... AOC ENVISION series
  • The two usually run on 1920 x 1080
  • With the help of the ATI Radeon HD 5700 series
  • Both using VGA adapters convert
  1. Turn it on one day and the resolution is all screwed up after using an Xbox on the AOC (AV HDMI cords don't transfer sound for me)<---- might="">
  2. Cannot repair resolution of VGA resolution (?) (1600 x 900, 1440 x 900...) due to the generic Non-Plug-and-Play monitor.
  3. System Restore - nothing
  4. Drivers switch autour using AVG and other versions of Radeon. -fucking nothing but resolution
  5. Re-plug-nothing
  6. Defragmentation (desperate after 4 hours) - nothing
  7. Restart for the 100th time
  8. The computer stops at 'Starting Windows' screen and stops at halfway through safe mode.
  9. F8 F8 F8 F8 F8
  10. 'Repair your computer' - nothing
  11. Connect to the computer through Tablet and update all the drivers - back to step 2 of this ti time sometimes shows generic Non - pnp monitor and sometimes peripheral display watch on: laptop display even if my 2nd monitor displays and able to react to what I put on it.

  Monitor AOC is shifted from 3/4 "(black margin on the bottom) and an uncertain amount to the left (no right margin)."

  trying to be as helpful as possible, I have a lot of work to do and CS work is almost impossible for me without 2 monitors to work please help, thank you.
  UPDATE! : I had no sound.

  Mike,

  Disable the LogMeIn driver from Device Manager and check. There are a few reported issues where LogMeIn driver has disabled the aero thus also changed the screen resolution feature.

  -Click Start, and then press on and enter type Device Manager.
  -Double click on graphics cards to expand the video drivers.
  -Right-click on the LogMeIn mirror driver and then click on disable.
  -Restart the computer and see if that helps.

  You can try to uninstall the video drivers and then install the driver from the AMD website as given in my first answer.
  Note: it is there no trouble uninstalling the video driver. When the video driver is uninstalled, Windows starts with minimum VGA drivers. The resolution of the screen (icons on the screen) may look bigger, but after installing the latest video drivers, the screen resolution will be back to normal.

  Please try the following steps and answer results.

• How to add a 2nd monitor to my DX4380 - UR22

  I only have my open HDMI and my monitr is an older version using a SVGA

  Hello there ArsenalOC1886! : to answer this question specfically

  Why not buy a cable that has the HDMI on one end {PC} & a SVGA to another (the 2nd monitor)

  or get a HDMI\SVGA adapter at your local computer store

  with plug & game being as advanced as it is work should be unless it is not compatible

  Good luck

  hope that clears that up, clarifies & help

  spacechild