3.6.1 numbers do not open some .xls files

Similar Questions

• MX will not open some .fla files

  I have two HDs in my XP system.
  Drive 0 has been divided as C: and D:
  Disc 1 is E:
  
  All my .fla files were on E:
  
  Then I repartitioned 0 c: drive and reinstalled XP, Flash MX and all software.
  
  Thus the E: drive (where are all the .fla files) is now D:
  
  Most of these great open .fla files, but some will not open and crash Flash MX.
  
  What are possible reasons that SOME files will not open?
  
  I can only assume that these files are who need resources which cannot be now available. Fonts? Components?
  
  I have seven projects in different folders on the same drive.
  Each folder contains many progressive each project stops as it was developed.
  The files of all the projects except one are very good.
  But ALL the files in a folder does not open.
  I don't see how only that a project might have been corrupted.
  More likely that the environment of operating system or Application is now somewhat different than before - in a way that does not conform to the needs of this particular project.
  
  Thank you!

  Answer found!
  Don't have QuickTime installed, including the files apparently needed.

• The numbers "could not open file for some reason any."

  Suddenly some of my documents of numbers prompt response "numbers" could not open file for some reason any ' "the document is unavailable. Other documents numbers remain accessible. My backup versions invites the same response when I try to open them. Is there a solution?

  Hello Fred,.

  Thanks for this info and choosing the communities Support from Apple. I know how important is able to open all your files in numbers is for you!

  If I understand correctly, you cannot open some files of numbers even from backups, but others continue to work. To limit this problem, I would suggest starting with the following steps:

  1. first of all, run disk utility and check for questions on your hard drive, as hard drive problems can lead to situations like yours.

  Disk utility (Yosemite): a disc repair

  2. then, you can test this in a new user, to refine, if it's a question broad system or specific to your username.

  How to test a question in another account on your Mac.

  See you soon!

• Could not open the xls for some reason any

  When I try to open a XLS file with numbers 3.6.1 I get the error message ' cannot be opened for some reason any. "

  I tried to change the type of file csv and txt but neither technique gives readable results.

  I also tried to fix HD Mac (in fact a SSD) with disk utility and reboot, but that did not help either.

  Thoughts?

  Dick

  Hi Dick,

  Change the extension (.csv or .txt) is not any change in the type of file.

  Assuming that, since you posted in the numbers for the Mac community and state what version 3.6.1 a number you're on a Mac (and not using iOS 8 on your iPad), you can try opening the file using LibreOffice or Apache OpenOffice. Both are free to download and use. If none of them opens the file, it is probably corrupted. If they can open the file, there may be a compatibility problem between this file and the numbers. Try registering LibreOffice or Apache OpenOffice (like a MS Excel file), then try opening thaat version saved in number.

  Kind regards

  Barry

• My 1.6.1 Safari does not open some sites like my medical AARP account. How can I fix it?

  My 1.6.1 Safari does not open some sites, like my medical account of AARP. How can I fix?

  Safari 1.6.1?

  What version of Mac OS X are you running?

• Photo Gallery does not open some files (pictures) that he used. He said: it is not "supported."

  Photo Gallery does not open some files that it used.  He said that its not "supported"?  In addition, I can't open some of the files that are in that I think an older version of word.  How can I fix these problems?  There is no window that opens for updates when opening Photo Gallery.

  Well, you don't say what files it used to open then try this. Control Panel, programs, by default, set your default progaams, Windows Photo Gallery, set this program as default.

• jpg and videos do not open some sites since the upgrade to FX 39

  Don't know what hurts, but the first attempt at this has no post. I was connected at the time.

  Links that do not open correctly (jpg files and videos (YouTube, etc) are on certain sites only, others work as before.)

  The jpgs on 'broken' websites appear as a large full gray area, a border around a white box, or a small icon. Right click on one and select open in a new tab, the are displayed correctly. Just as same behavior with links of PNG files.

  The videos show as blank spaces. Make a right click on this space does not offer a new tab (share this page, save the page slot, etc..)

  I'm on a laptop of HP under Windows 7 Pro; My wife on a Dell laptop, also Windows 7 computer doesn't have the problem. I have several modules more than she does.

  Thank you

  togfnh said

  Thank you, Bryan.

  I opened an old profile and both related JPGs and YouTube videos open correctly. What happened in (or around the same time that) upgrade affected the current profile.

  Question: opens a new profile of the best way to solve the problem, or is there something else I should try first?

  Thank you

  You might want to try dumping your cache and if unsuccessful following would be to clear out cookies.

  You add or remove plug-ins since it last worked properly?

• Unable to launch programs error: could not open rtl120.bpl file is not found, try to reinstall the program

  Original title: difficulties to open programs

  I keep trying to open different programs but get a message that says "could not open rtl120.bpl file is not found, try reinstalling the program.»  My problem is that some of these programs came with my package on the computer and if I uninstall it then I have to pay to re install a new program.  How can I solve this problem?

  Hi JenniferAS,

  1. is the issue limited with a particular program?

  2. what operating system is installed on the computer?

  3 did you changes to the computer before the show?

  It is a file associated with a program called Tune Up Utilities 2010.

  Tune up Utilities is a suite of utility software for Microsoft Windows designed to help manage, maintain, optimize, configure and troubleshoot a computer system.

  Method 1: Uninstall and reinstall Tune - Up Utilities 2010 and see if that helps.

  Step 1: Uninstall tune-up Utilities 2010.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  Step 2: Re-install tune-up Utilities 2010.

  Download tune-up from here:

  http://download.tune-up.com/TUU2010/TU2010TrialEN-GB.exe

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Let us know if that helps.

• Elements 9 does not open the raw files from my new camera

  Have a panasonic DMC-GX85.  My 9 items does not open the raw file and I failed in upgrading to 9.03 and camera raw 6.5.  Y at - it solution or do I have the latest elements?

  There are essentially 4 different solutions to this common problem with the older PES software:

  (1) upgrade to the latest version 14;  It's not free.

  (2) the software should come with your camera and download pictures on your computer;

  (3) your operating system may have some updates to download images from your camera.

  (4) use Adobe DNG converter and it is still free.  The latest version is:

  Adobe - Adobe Camera Raw and DNG Converter: for Windows >

  He must also watch this video to learn how to use the DNG Converter:

  I hope this helps.

• Cannot open some PDF files despite its drive 11.0.10 installed in windows 10

  Hi, I installed Windows 10 and Acrobat Reader 11.0.10. I can't open some PDF files. Although it worked well in windows 8.1. But since the update to windows 10, I am unable to launch adobe reader software.

  I reinstall the drive 11.0.10 but do not solve the problem.

  It shows me this message when try to open the drive root directory.

  

  This case try opening any file directly.

  

  I took the measures so far

  1 reinstalled drive several times.

  2 used cleanup tool Download Adobe Reader and Acrobat tool - Adobe Labs.

  3 tried to install the player in a different directory.

  4 rise to earlier version of reader.

  5. run solve several times.

  but the problem is not yet solved, please provide a feasible solution in this regard.
  

  problem solved...

  Rename the file AcroRd32.exe in Adobe.exe

  It worked for me

  Here are some interesting by Adobe and Microsoft answers

  

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• I get this error "Flight Simulator could not load some program files and will now close" - does anyone know how to solve?

  I get this error "Flight Simulator could not load some program files and will now close" - does anyone know how to solve?

  Hello

  I suggest you to please follow the steps described in the following articles and check if it helps.

  "Invalid product key" error in Microsoft Games, MapPoint, or Streets & Trips

  http://support.Microsoft.com/kb/812467

  How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint

  http://support.Microsoft.com/kb/973457

  Let us know if it helps!

• Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities of free ware

  Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities free ware. Also, windows Explorer does not display dimension and other video related information for the file. Y at - it a tool that can indicate what exactly is the problem with the file.

  Ritu

  Hello

  1. you get any error message?

  2. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  http://support.Microsoft.com/kb/279242

• Windows Media Player does not open the .tgz files

  Original title: codec .tgz files

  My Windows Media Player does not open the .tgz files

  Hello

  1. what happens when you try to open the .tgz files?

  2. what version of Windows Media Player do you use?

  .tgz file is not supported by Windows Media Player.

  You can use your favorite search engine to download and install the latest codec for Windows Media Player. Subsequently, check if you are able to read .tgz files.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  
  Reference: information about the types of media files that supports Windows Media Player

  Package of Installation of codec

  Hope the helps of information.

• Window Live Mail does not open the wmv files.

  Window Live Mail does not open the wmv files.  It comes up with an error that says: (wrong parameters).  Also gives the path that looks all wrong.  How can I change these settings?

  If I save the wmv on my desktop it will open, so I think that the file association is OK.

   
  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: Windows Media Player.
  6. check: always use the selected program to open this type of file.
  7. click on OK.